diff --git a/Documentation/dev-tools/autofdo.rst b/Documentation/dev-tools/autofdo.rst new file mode 100644 index 000000000000..1f0a451e9ccd --- /dev/null +++ b/Documentation/dev-tools/autofdo.rst @@ -0,0 +1,168 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================== +Using AutoFDO with the Linux kernel +=================================== + +This enables AutoFDO build support for the kernel when using +the Clang compiler. AutoFDO (Auto-Feedback-Directed Optimization) +is a type of profile-guided optimization (PGO) used to enhance the +performance of binary executables. It gathers information about the +frequency of execution of various code paths within a binary using +hardware sampling. This data is then used to guide the compiler's +optimization decisions, resulting in a more efficient binary. AutoFDO +is a powerful optimization technique, and data indicates that it can +significantly improve kernel performance. It's especially beneficial +for workloads affected by front-end stalls. + +For AutoFDO builds, unlike non-FDO builds, the user must supply a +profile. Acquiring an AutoFDO profile can be done in several ways. +AutoFDO profiles are created by converting hardware sampling using +the "perf" tool. It is crucial that the workload used to create these +perf files is representative; they must exhibit runtime +characteristics similar to the workloads that are intended to be +optimized. Failure to do so will result in the compiler optimizing +for the wrong objective. + +The AutoFDO profile often encapsulates the program's behavior. If the +performance-critical codes are architecture-independent, the profile +can be applied across platforms to achieve performance gains. For +instance, using the profile generated on Intel architecture to build +a kernel for AMD architecture can also yield performance improvements. + +There are two methods for acquiring a representative profile: +(1) Sample real workloads using a production environment. +(2) Generate the profile using a representative load test. +When enabling the AutoFDO build configuration without providing an +AutoFDO profile, the compiler only modifies the dwarf information in +the kernel without impacting runtime performance. It's advisable to +use a kernel binary built with the same AutoFDO configuration to +collect the perf profile. While it's possible to use a kernel built +with different options, it may result in inferior performance. + +One can collect profiles using AutoFDO build for the previous kernel. +AutoFDO employs relative line numbers to match the profiles, offering +some tolerance for source changes. This mode is commonly used in a +production environment for profile collection. + +In a profile collection based on a load test, the AutoFDO collection +process consists of the following steps: + +#. Initial build: The kernel is built with AutoFDO options + without a profile. + +#. Profiling: The above kernel is then run with a representative + workload to gather execution frequency data. This data is + collected using hardware sampling, via perf. AutoFDO is most + effective on platforms supporting advanced PMU features like + LBR on Intel machines. + +#. AutoFDO profile generation: Perf output file is converted to + the AutoFDO profile via offline tools. + +The support requires a Clang compiler LLVM 17 or later. + +Preparation +=========== + +Configure the kernel with:: + + CONFIG_AUTOFDO_CLANG=y + +Customization +============= + +The default CONFIG_AUTOFDO_CLANG setting covers kernel space objects for +AutoFDO builds. One can, however, enable or disable AutoFDO build for +individual files and directories by adding a line similar to the following +to the respective kernel Makefile: + +- For enabling a single file (e.g. foo.o) :: + + AUTOFDO_PROFILE_foo.o := y + +- For enabling all files in one directory :: + + AUTOFDO_PROFILE := y + +- For disabling one file :: + + AUTOFDO_PROFILE_foo.o := n + +- For disabling all files in one directory :: + + AUTOFDO_PROFILE := n + +Workflow +======== + +Here is an example workflow for AutoFDO kernel: + +1) Build the kernel on the host machine with LLVM enabled, + for example, :: + + $ make menuconfig LLVM=1 + + Turn on AutoFDO build config:: + + CONFIG_AUTOFDO_CLANG=y + + With a configuration that with LLVM enabled, use the following command:: + + $ scripts/config -e AUTOFDO_CLANG + + After getting the config, build with :: + + $ make LLVM=1 + +2) Install the kernel on the test machine. + +3) Run the load tests. The '-c' option in perf specifies the sample + event period. We suggest using a suitable prime number, like 500009, + for this purpose. + + - For Intel platforms:: + + $ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c -o -- + + - For AMD platforms: + + The supported systems are: Zen3 with BRS, or Zen4 with amd_lbr_v2. To check, + + For Zen3:: + + $ cat proc/cpuinfo | grep " brs" + + For Zen4:: + + $ cat proc/cpuinfo | grep amd_lbr_v2 + + The following command generated the perf data file:: + + $ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a -N -b -c -o -- + +4) (Optional) Download the raw perf file to the host machine. + +5) To generate an AutoFDO profile, two offline tools are available: + create_llvm_prof and llvm_profgen. The create_llvm_prof tool is part + of the AutoFDO project and can be found on GitHub + (https://github.com/google/autofdo), version v0.30.1 or later. + The llvm_profgen tool is included in the LLVM compiler itself. It's + important to note that the version of llvm_profgen doesn't need to match + the version of Clang. It needs to be the LLVM 19 release of Clang + or later, or just from the LLVM trunk. :: + + $ llvm-profgen --kernel --binary= --perfdata= -o + + or :: + + $ create_llvm_prof --binary= --profile= --format=extbinary --out= + + Note that multiple AutoFDO profile files can be merged into one via:: + + $ llvm-profdata merge -o ... + +6) Rebuild the kernel using the AutoFDO profile file with the same config as step 1, + (Note CONFIG_AUTOFDO_CLANG needs to be enabled):: + + $ make LLVM=1 CLANG_AUTOFDO_PROFILE= diff --git a/Documentation/dev-tools/index.rst b/Documentation/dev-tools/index.rst index 53d4d124f9c5..6945644f7008 100644 --- a/Documentation/dev-tools/index.rst +++ b/Documentation/dev-tools/index.rst @@ -34,6 +34,7 @@ Documentation/dev-tools/testing-overview.rst ktap checkuapi gpio-sloppy-logic-analyzer + autofdo .. only:: subproject and html diff --git a/MAINTAINERS b/MAINTAINERS index bdae0faf000c..1eba172ed532 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3665,6 +3665,13 @@ F: kernel/audit* F: lib/*audit.c K: \baudit_[a-z_0-9]\+\b +AUTOFDO BUILD +M: Rong Xu +M: Han Shen +S: Supported +F: Documentation/dev-tools/autofdo.rst +F: scripts/Makefile.autofdo + AUXILIARY BUS DRIVER M: Greg Kroah-Hartman R: Dave Ertman diff --git a/Makefile b/Makefile index 266376f7f164..1f31c633a41d 100644 --- a/Makefile +++ b/Makefile @@ -1023,6 +1023,7 @@ include-$(CONFIG_KMSAN) += scripts/Makefile.kmsan include-$(CONFIG_UBSAN) += scripts/Makefile.ubsan include-$(CONFIG_KCOV) += scripts/Makefile.kcov include-$(CONFIG_RANDSTRUCT) += scripts/Makefile.randstruct +include-$(CONFIG_AUTOFDO_CLANG) += scripts/Makefile.autofdo include-$(CONFIG_GCC_PLUGINS) += scripts/Makefile.gcc-plugins include $(addprefix $(srctree)/, $(include-y)) diff --git a/arch/Kconfig b/arch/Kconfig index bd9f095d69fa..8dca3b5e6ef5 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -811,6 +811,26 @@ config LTO_CLANG_THIN If unsure, say Y. endchoice +config ARCH_SUPPORTS_AUTOFDO_CLANG + bool + +config AUTOFDO_CLANG + bool "Enable Clang's AutoFDO build (EXPERIMENTAL)" + depends on ARCH_SUPPORTS_AUTOFDO_CLANG + depends on CC_IS_CLANG && CLANG_VERSION >= 170000 + help + This option enables Clang’s AutoFDO build. When + an AutoFDO profile is specified in variable + CLANG_AUTOFDO_PROFILE during the build process, + Clang uses the profile to optimize the kernel. + + If no profile is specified, AutoFDO options are + still passed to Clang to facilitate the collection + of perf data for creating an AutoFDO profile in + subsequent builds. + + If unsure, say N. + config ARCH_SUPPORTS_CFI_CLANG bool help diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 16354dfa6d96..9dc87661fb37 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -126,6 +126,7 @@ config X86 select ARCH_SUPPORTS_LTO_CLANG select ARCH_SUPPORTS_LTO_CLANG_THIN select ARCH_SUPPORTS_RT + select ARCH_SUPPORTS_AUTOFDO_CLANG select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_CMPXCHG_LOCKREF if X86_CMPXCHG64 select ARCH_USE_MEMTEST diff --git a/scripts/Makefile.autofdo b/scripts/Makefile.autofdo new file mode 100644 index 000000000000..ff96a63fea7c --- /dev/null +++ b/scripts/Makefile.autofdo @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: GPL-2.0 + +# Enable available and selected Clang AutoFDO features. + +CFLAGS_AUTOFDO_CLANG := -fdebug-info-for-profiling -mllvm -enable-fs-discriminator=true -mllvm -improved-fs-discriminator=true + +ifndef CONFIG_DEBUG_INFO + CFLAGS_AUTOFDO_CLANG += -gmlt +endif + +ifdef CLANG_AUTOFDO_PROFILE + CFLAGS_AUTOFDO_CLANG += -fprofile-sample-use=$(CLANG_AUTOFDO_PROFILE) +endif + +ifdef CONFIG_LTO_CLANG_THIN + ifdef CLANG_AUTOFDO_PROFILE + KBUILD_LDFLAGS += --lto-sample-profile=$(CLANG_AUTOFDO_PROFILE) + endif + KBUILD_LDFLAGS += --mllvm=-enable-fs-discriminator=true --mllvm=-improved-fs-discriminator=true -plugin-opt=thinlto +endif + +export CFLAGS_AUTOFDO_CLANG diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 01a9f567d5af..2d0942c1a027 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -191,6 +191,16 @@ _c_flags += $(if $(patsubst n%,, \ -D__KCSAN_INSTRUMENT_BARRIERS__) endif +# +# Enable AutoFDO build flags except some files or directories we don't want to +# enable (depends on variables AUTOFDO_PROFILE_obj.o and AUTOFDO_PROFILE). +# +ifeq ($(CONFIG_AUTOFDO_CLANG),y) +_c_flags += $(if $(patsubst n%,, \ + $(AUTOFDO_PROFILE_$(target-stem).o)$(AUTOFDO_PROFILE)$(is-kernel-object)), \ + $(CFLAGS_AUTOFDO_CLANG)) +endif + # $(src) for including checkin headers from generated source files # $(obj) for including generated headers from checkin source files ifeq ($(KBUILD_EXTMOD),) diff --git a/tools/objtool/check.c b/tools/objtool/check.c index 6604f5d038aa..4c5229991e1e 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -4557,6 +4557,7 @@ static int validate_ibt(struct objtool_file *file) !strcmp(sec->name, "__jump_table") || !strcmp(sec->name, "__mcount_loc") || !strcmp(sec->name, ".kcfi_traps") || + !strcmp(sec->name, ".llvm.call-graph-profile") || strstr(sec->name, "__patchable_function_entries")) continue;