mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-01-07 13:53:24 +00:00
spi: brcm,spi-bcm-qspi: convert to the json-schema
This helps validating DTS files. Changes that require mentioning: 1. reg-names "mspi_regs" and "bspi_regs" were renamed to "mspi" and "bspi" as that is what's used in DTS files and in Linux driver 2. interrupt-names Names were reordered. "mspi_done" has to go first as it's always required. 3. spi-rx-bus-width Property description was dropped as it's part of the spi-controller.yaml 4. Examples: * drop partitions as they are well documented elsewhere * regs and interrupts were formatted and reordered to match yaml * <0x1c> was replaced with <&gic> * "m25p80" node name became "flash" * dropped invalid "m25p,fast-read" property * dropped undocumented and Linux-unused "clock-names" This rewritten binding validates cleanly using the "dt_binding_check". Some Linux stored DTS files will require reordering regs and interrupts to make dtbs_check happy. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210416194723.23855-1-zajec5@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Rafał Miłecki
Mark Brown
parent
1b8a7d4282
commit
7d82f89c39
@ -1,245 +0,0 @@
|
||||
Broadcom SPI controller
|
||||
|
||||
The Broadcom SPI controller is a SPI master found on various SOCs, including
|
||||
BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consits
|
||||
of :
|
||||
MSPI : SPI master controller can read and write to a SPI slave device
|
||||
BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration
|
||||
for flash reads and be configured to do single, double, quad lane
|
||||
io with 3-byte and 4-byte addressing support.
|
||||
|
||||
Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP.
|
||||
MSPI master can be used wihout BSPI. BRCMSTB SoCs have an additional instance
|
||||
of a MSPI master without the BSPI to use with non flash slave devices that
|
||||
use SPI protocol.
|
||||
|
||||
Required properties:
|
||||
|
||||
- #address-cells:
|
||||
Must be <1>, as required by generic SPI binding.
|
||||
|
||||
- #size-cells:
|
||||
Must be <0>, also as required by generic SPI binding.
|
||||
|
||||
- compatible:
|
||||
Must be one of :
|
||||
"brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi" : MSPI+BSPI on BRCMSTB SoCs
|
||||
"brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi" : Second Instance of MSPI
|
||||
BRCMSTB SoCs
|
||||
"brcm,spi-bcm7425-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
|
||||
BRCMSTB SoCs
|
||||
"brcm,spi-bcm7429-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
|
||||
BRCMSTB SoCs
|
||||
"brcm,spi-bcm7435-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
|
||||
BRCMSTB SoCs
|
||||
"brcm,spi-bcm7445-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
|
||||
BRCMSTB SoCs
|
||||
"brcm,spi-bcm7216-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
|
||||
BRCMSTB SoCs
|
||||
"brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
|
||||
BRCMSTB SoCs
|
||||
"brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi" : MSPI+BSPI on Cygnus, NSP
|
||||
"brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi" : NS2 SoCs
|
||||
|
||||
- reg:
|
||||
Define the bases and ranges of the associated I/O address spaces.
|
||||
The required range is MSPI controller registers.
|
||||
|
||||
- reg-names:
|
||||
First name does not matter, but must be reserved for the MSPI controller
|
||||
register range as mentioned in 'reg' above, and will typically contain
|
||||
- "bspi_regs": BSPI register range, not required with compatible
|
||||
"spi-brcmstb-mspi"
|
||||
- "mspi_regs": MSPI register range is required for compatible strings
|
||||
- "intr_regs", "intr_status_reg" : Interrupt and status register for
|
||||
NSP, NS2, Cygnus SoC
|
||||
|
||||
- interrupts
|
||||
The interrupts used by the MSPI and/or BSPI controller.
|
||||
|
||||
- interrupt-names:
|
||||
Names of interrupts associated with MSPI
|
||||
- "mspi_halted" :
|
||||
- "mspi_done": Indicates that the requested SPI operation is complete.
|
||||
- "spi_lr_fullness_reached" : Linear read BSPI pipe full
|
||||
- "spi_lr_session_aborted" : Linear read BSPI pipe aborted
|
||||
- "spi_lr_impatient" : Linear read BSPI requested when pipe empty
|
||||
- "spi_lr_session_done" : Linear read BSPI session done
|
||||
|
||||
- clocks:
|
||||
A phandle to the reference clock for this block.
|
||||
|
||||
Optional properties:
|
||||
|
||||
|
||||
- native-endian
|
||||
Defined when using BE SoC and device uses BE register read/write
|
||||
|
||||
Recommended optional m25p80 properties:
|
||||
- spi-rx-bus-width: Definition as per
|
||||
Documentation/devicetree/bindings/spi/spi-bus.txt
|
||||
|
||||
Examples:
|
||||
|
||||
BRCMSTB SoC Example:
|
||||
|
||||
SPI Master (MSPI+BSPI) for SPI-NOR access:
|
||||
|
||||
spi@f03e3400 {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
|
||||
reg = <0xf03e0920 0x4 0xf03e3400 0x188 0xf03e3200 0x50>;
|
||||
reg-names = "cs_reg", "mspi", "bspi";
|
||||
interrupts = <0x6 0x5 0x4 0x3 0x2 0x1 0x0>;
|
||||
interrupt-parent = <0x1c>;
|
||||
interrupt-names = "mspi_halted",
|
||||
"mspi_done",
|
||||
"spi_lr_overread",
|
||||
"spi_lr_session_done",
|
||||
"spi_lr_impatient",
|
||||
"spi_lr_session_aborted",
|
||||
"spi_lr_fullness_reached";
|
||||
|
||||
clocks = <&hif_spi>;
|
||||
clock-names = "sw_spi";
|
||||
|
||||
m25p80@0 {
|
||||
#size-cells = <0x2>;
|
||||
#address-cells = <0x2>;
|
||||
compatible = "m25p80";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <0x2625a00>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
m25p,fast-read;
|
||||
|
||||
flash0.bolt@0 {
|
||||
reg = <0x0 0x0 0x0 0x100000>;
|
||||
};
|
||||
|
||||
flash0.macadr@100000 {
|
||||
reg = <0x0 0x100000 0x0 0x10000>;
|
||||
};
|
||||
|
||||
flash0.nvram@110000 {
|
||||
reg = <0x0 0x110000 0x0 0x10000>;
|
||||
};
|
||||
|
||||
flash0.kernel@120000 {
|
||||
reg = <0x0 0x120000 0x0 0x400000>;
|
||||
};
|
||||
|
||||
flash0.devtree@520000 {
|
||||
reg = <0x0 0x520000 0x0 0x10000>;
|
||||
};
|
||||
|
||||
flash0.splash@530000 {
|
||||
reg = <0x0 0x530000 0x0 0x80000>;
|
||||
};
|
||||
|
||||
flash0@0 {
|
||||
reg = <0x0 0x0 0x0 0x4000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
MSPI master for any SPI device :
|
||||
|
||||
spi@f0416000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&upg_fixed>;
|
||||
compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
|
||||
reg = <0xf0416000 0x180>;
|
||||
reg-names = "mspi";
|
||||
interrupts = <0x14>;
|
||||
interrupt-parent = <&irq0_aon_intc>;
|
||||
interrupt-names = "mspi_done";
|
||||
};
|
||||
|
||||
iProc SoC Example:
|
||||
|
||||
qspi: spi@18027200 {
|
||||
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
|
||||
reg = <0x18027200 0x184>,
|
||||
<0x18027000 0x124>,
|
||||
<0x1811c408 0x004>,
|
||||
<0x180273a0 0x01c>;
|
||||
reg-names = "mspi_regs", "bspi_regs", "intr_regs", "intr_status_reg";
|
||||
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names =
|
||||
"spi_lr_fullness_reached",
|
||||
"spi_lr_session_aborted",
|
||||
"spi_lr_impatient",
|
||||
"spi_lr_session_done",
|
||||
"mspi_done",
|
||||
"mspi_halted";
|
||||
clocks = <&iprocmed>;
|
||||
clock-names = "iprocmed";
|
||||
num-cs = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
|
||||
NS2 SoC Example:
|
||||
|
||||
qspi: spi@66470200 {
|
||||
compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
|
||||
reg = <0x66470200 0x184>,
|
||||
<0x66470000 0x124>,
|
||||
<0x67017408 0x004>,
|
||||
<0x664703a0 0x01c>;
|
||||
reg-names = "mspi", "bspi", "intr_regs",
|
||||
"intr_status_reg";
|
||||
interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "spi_l1_intr";
|
||||
clocks = <&iprocmed>;
|
||||
clock-names = "iprocmed";
|
||||
num-cs = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
|
||||
m25p80 node for NSP, NS2
|
||||
|
||||
&qspi {
|
||||
flash: m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "m25p80";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <12500000>;
|
||||
m25p,fast-read;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
|
||||
partition@0 {
|
||||
label = "boot";
|
||||
reg = <0x00000000 0x000a0000>;
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
label = "env";
|
||||
reg = <0x000a0000 0x00060000>;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "system";
|
||||
reg = <0x00100000 0x00600000>;
|
||||
};
|
||||
|
||||
partition@700000 {
|
||||
label = "rootfs";
|
||||
reg = <0x00700000 0x01900000>;
|
||||
};
|
||||
};
|
||||
198
Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
Normal file
198
Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
Normal file
@ -0,0 +1,198 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/spi/brcm,spi-bcm-qspi.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Broadcom SPI controller
|
||||
|
||||
maintainers:
|
||||
- Kamal Dasu <kdasu.kdev@gmail.com>
|
||||
- Rafał Miłecki <rafal@milecki.pl>
|
||||
|
||||
description: |
|
||||
The Broadcom SPI controller is a SPI master found on various SOCs, including
|
||||
BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consits
|
||||
of:
|
||||
MSPI : SPI master controller can read and write to a SPI slave device
|
||||
BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration
|
||||
for flash reads and be configured to do single, double, quad lane
|
||||
io with 3-byte and 4-byte addressing support.
|
||||
|
||||
Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP.
|
||||
MSPI master can be used wihout BSPI. BRCMSTB SoCs have an additional instance
|
||||
of a MSPI master without the BSPI to use with non flash slave devices that
|
||||
use SPI protocol.
|
||||
|
||||
allOf:
|
||||
- $ref: spi-controller.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- description: Second Instance of MSPI BRCMSTB SoCs
|
||||
items:
|
||||
- enum:
|
||||
- brcm,spi-bcm7425-qspi
|
||||
- brcm,spi-bcm7429-qspi
|
||||
- brcm,spi-bcm7435-qspi
|
||||
- brcm,spi-bcm7445-qspi
|
||||
- brcm,spi-bcm7216-qspi
|
||||
- brcm,spi-bcm7278-qspi
|
||||
- const: brcm,spi-bcm-qspi
|
||||
- const: brcm,spi-brcmstb-mspi
|
||||
- description: Second Instance of MSPI BRCMSTB SoCs
|
||||
items:
|
||||
- enum:
|
||||
- brcm,spi-brcmstb-qspi
|
||||
- brcm,spi-brcmstb-mspi
|
||||
- brcm,spi-nsp-qspi
|
||||
- brcm,spi-ns2-qspi
|
||||
- const: brcm,spi-bcm-qspi
|
||||
|
||||
reg:
|
||||
minItems: 1
|
||||
maxItems: 5
|
||||
|
||||
reg-names:
|
||||
minItems: 1
|
||||
maxItems: 5
|
||||
items:
|
||||
- const: mspi
|
||||
- const: bspi
|
||||
- enum: [ intr_regs, intr_status_reg, cs_reg ]
|
||||
- enum: [ intr_regs, intr_status_reg, cs_reg ]
|
||||
- enum: [ intr_regs, intr_status_reg, cs_reg ]
|
||||
|
||||
interrupts:
|
||||
minItems: 1
|
||||
maxItems: 7
|
||||
|
||||
interrupt-names:
|
||||
oneOf:
|
||||
- minItems: 1
|
||||
maxItems: 7
|
||||
items:
|
||||
- const: mspi_done
|
||||
- const: mspi_halted
|
||||
- const: spi_lr_fullness_reached
|
||||
- const: spi_lr_session_aborted
|
||||
- const: spi_lr_impatient
|
||||
- const: spi_lr_session_done
|
||||
- const: spi_lr_overread
|
||||
- const: spi_l1_intr
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
description: reference clock for this block
|
||||
|
||||
native-endian:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description: Defined when using BE SoC and device uses BE register read/write
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
required:
|
||||
- reg
|
||||
- reg-names
|
||||
- interrupts
|
||||
- interrupt-names
|
||||
|
||||
examples:
|
||||
- | # BRCMSTB SoC: SPI Master (MSPI+BSPI) for SPI-NOR access
|
||||
spi@f03e3400 {
|
||||
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
|
||||
reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>;
|
||||
reg-names = "mspi", "bspi", "cs_reg";
|
||||
interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupt-names = "mspi_done",
|
||||
"mspi_halted",
|
||||
"spi_lr_fullness_reached",
|
||||
"spi_lr_session_aborted",
|
||||
"spi_lr_impatient",
|
||||
"spi_lr_session_done",
|
||||
"spi_lr_overread";
|
||||
clocks = <&hif_spi>;
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
flash@0 {
|
||||
#size-cells = <0x2>;
|
||||
#address-cells = <0x2>;
|
||||
compatible = "m25p80";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <0x2625a00>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
};
|
||||
};
|
||||
- | # BRCMSTB SoC: MSPI master for any SPI device
|
||||
spi@f0416000 {
|
||||
clocks = <&upg_fixed>;
|
||||
compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
|
||||
reg = <0xf0416000 0x180>;
|
||||
reg-names = "mspi";
|
||||
interrupts = <0x14>;
|
||||
interrupt-parent = <&irq0_aon_intc>;
|
||||
interrupt-names = "mspi_done";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
- | # iProc SoC
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
spi@18027200 {
|
||||
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
|
||||
reg = <0x18027200 0x184>,
|
||||
<0x18027000 0x124>,
|
||||
<0x1811c408 0x004>,
|
||||
<0x180273a0 0x01c>;
|
||||
reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
|
||||
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "mspi_done",
|
||||
"mspi_halted",
|
||||
"spi_lr_fullness_reached",
|
||||
"spi_lr_session_aborted",
|
||||
"spi_lr_impatient",
|
||||
"spi_lr_session_done";
|
||||
clocks = <&iprocmed>;
|
||||
num-cs = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
- | # NS2 SoC
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
spi@66470200 {
|
||||
compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
|
||||
reg = <0x66470200 0x184>,
|
||||
<0x66470000 0x124>,
|
||||
<0x67017408 0x004>,
|
||||
<0x664703a0 0x01c>;
|
||||
reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
|
||||
interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "spi_l1_intr";
|
||||
clocks = <&iprocmed>;
|
||||
num-cs = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "m25p80";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <12500000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
};
|
||||
};
|
||||
@ -3689,7 +3689,7 @@ BROADCOM SPI DRIVER
|
||||
M: Kamal Dasu <kdasu.kdev@gmail.com>
|
||||
M: bcm-kernel-feedback-list@broadcom.com
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
|
||||
F: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
|
||||
F: drivers/spi/spi-bcm-qspi.*
|
||||
F: drivers/spi/spi-brcmstb-qspi.c
|
||||
F: drivers/spi/spi-iproc-qspi.c
|
||||
|
||||
Loading…
Reference in New Issue
Block a user