Merge branch 'tsc2007' into next

Bring in TSC2007 improvements.

drivers/input/touchscreen/Kconfig

@@ -1025,6 +1025,16 @@ config TOUCHSCREEN_TSC2007
 	  To compile this driver as a module, choose M here: the
 	  module will be called tsc2007.
 
+config TOUCHSCREEN_TSC2007_IIO
+	bool "IIO interface for external ADC input and temperature"
+	depends on TOUCHSCREEN_TSC2007
+	depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
+	help
+	  Saying Y here adds an iio interface to the tsc2007 which
+	  provides values for the AUX input (used for e.g. battery
+	  or ambient light monitoring), temperature and raw input
+	  values.
+
 config TOUCHSCREEN_W90X900
 	tristate "W90P910 touchscreen driver"
 	depends on ARCH_W90X900

drivers/input/touchscreen/Makefile

@@ -79,6 +79,8 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO)	+= tsc40.o
 obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE)	+= tsc200x-core.o
 obj-$(CONFIG_TOUCHSCREEN_TSC2004)	+= tsc2004.o
 obj-$(CONFIG_TOUCHSCREEN_TSC2005)	+= tsc2005.o
+tsc2007-y := tsc2007_core.o
+tsc2007-$(CONFIG_TOUCHSCREEN_TSC2007_IIO)	+= tsc2007_iio.o
 obj-$(CONFIG_TOUCHSCREEN_TSC2007)	+= tsc2007.o
 obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
 obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o

drivers/input/touchscreen/tsc2007.h

@@ -0,0 +1,101 @@
+
+/*
+ * Copyright (c) 2008 MtekVision Co., Ltd.
+ *	Kwangwoo Lee <kwlee@mtekvision.com>
+ *
+ * Using code from:
+ *  - ads7846.c
+ *	Copyright (c) 2005 David Brownell
+ *	Copyright (c) 2006 Nokia Corporation
+ *  - corgi_ts.c
+ *	Copyright (C) 2004-2005 Richard Purdie
+ *  - omap_ts.[hc], ads7846.h, ts_osk.c
+ *	Copyright (C) 2002 MontaVista Software
+ *	Copyright (C) 2004 Texas Instruments
+ *	Copyright (C) 2005 Dirk Behme
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef _TSC2007_H
+#define _TSC2007_H
+
+#define TSC2007_MEASURE_TEMP0		(0x0 << 4)
+#define TSC2007_MEASURE_AUX		(0x2 << 4)
+#define TSC2007_MEASURE_TEMP1		(0x4 << 4)
+#define TSC2007_ACTIVATE_XN		(0x8 << 4)
+#define TSC2007_ACTIVATE_YN		(0x9 << 4)
+#define TSC2007_ACTIVATE_YP_XN		(0xa << 4)
+#define TSC2007_SETUP			(0xb << 4)
+#define TSC2007_MEASURE_X		(0xc << 4)
+#define TSC2007_MEASURE_Y		(0xd << 4)
+#define TSC2007_MEASURE_Z1		(0xe << 4)
+#define TSC2007_MEASURE_Z2		(0xf << 4)
+
+#define TSC2007_POWER_OFF_IRQ_EN	(0x0 << 2)
+#define TSC2007_ADC_ON_IRQ_DIS0		(0x1 << 2)
+#define TSC2007_ADC_OFF_IRQ_EN		(0x2 << 2)
+#define TSC2007_ADC_ON_IRQ_DIS1		(0x3 << 2)
+
+#define TSC2007_12BIT			(0x0 << 1)
+#define TSC2007_8BIT			(0x1 << 1)
+
+#define MAX_12BIT			((1 << 12) - 1)
+
+#define ADC_ON_12BIT	(TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
+
+#define READ_Y		(ADC_ON_12BIT | TSC2007_MEASURE_Y)
+#define READ_Z1		(ADC_ON_12BIT | TSC2007_MEASURE_Z1)
+#define READ_Z2		(ADC_ON_12BIT | TSC2007_MEASURE_Z2)
+#define READ_X		(ADC_ON_12BIT | TSC2007_MEASURE_X)
+#define PWRDOWN		(TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
+
+struct ts_event {
+	u16	x;
+	u16	y;
+	u16	z1, z2;
+};
+
+struct tsc2007 {
+	struct input_dev	*input;
+	char			phys[32];
+
+	struct i2c_client	*client;
+
+	u16			model;
+	u16			x_plate_ohms;
+	u16			max_rt;
+	unsigned long		poll_period; /* in jiffies */
+	int			fuzzx;
+	int			fuzzy;
+	int			fuzzz;
+
+	unsigned int		gpio;
+	int			irq;
+
+	wait_queue_head_t	wait;
+	bool			stopped;
+
+	int			(*get_pendown_state)(struct device *);
+	void			(*clear_penirq)(void);
+
+	struct mutex		mlock;
+};
+
+int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd);
+u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, struct ts_event *tc);
+bool tsc2007_is_pen_down(struct tsc2007 *ts);
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_TSC2007_IIO)
+/* defined in tsc2007_iio.c */
+int tsc2007_iio_configure(struct tsc2007 *ts);
+#else
+static inline int tsc2007_iio_configure(struct tsc2007 *ts)
+{
+	return 0;
+}
+#endif /* CONFIG_TOUCHSCREEN_TSC2007_IIO */
+
+#endif /* _TSC2007_H */

drivers/input/touchscreen/tsc2007_core.c

@@ -27,70 +27,10 @@
 #include <linux/i2c.h>
 #include <linux/i2c/tsc2007.h>
 #include <linux/of_device.h>
-#include <linux/of.h>
 #include <linux/of_gpio.h>
+#include "tsc2007.h"
 
-#define TSC2007_MEASURE_TEMP0		(0x0 << 4)
+int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
-#define TSC2007_MEASURE_AUX		(0x2 << 4)
-#define TSC2007_MEASURE_TEMP1		(0x4 << 4)
-#define TSC2007_ACTIVATE_XN		(0x8 << 4)
-#define TSC2007_ACTIVATE_YN		(0x9 << 4)
-#define TSC2007_ACTIVATE_YP_XN		(0xa << 4)
-#define TSC2007_SETUP			(0xb << 4)
-#define TSC2007_MEASURE_X		(0xc << 4)
-#define TSC2007_MEASURE_Y		(0xd << 4)
-#define TSC2007_MEASURE_Z1		(0xe << 4)
-#define TSC2007_MEASURE_Z2		(0xf << 4)
-
-#define TSC2007_POWER_OFF_IRQ_EN	(0x0 << 2)
-#define TSC2007_ADC_ON_IRQ_DIS0		(0x1 << 2)
-#define TSC2007_ADC_OFF_IRQ_EN		(0x2 << 2)
-#define TSC2007_ADC_ON_IRQ_DIS1		(0x3 << 2)
-
-#define TSC2007_12BIT			(0x0 << 1)
-#define TSC2007_8BIT			(0x1 << 1)
-
-#define	MAX_12BIT			((1 << 12) - 1)
-
-#define ADC_ON_12BIT	(TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
-
-#define READ_Y		(ADC_ON_12BIT | TSC2007_MEASURE_Y)
-#define READ_Z1		(ADC_ON_12BIT | TSC2007_MEASURE_Z1)
-#define READ_Z2		(ADC_ON_12BIT | TSC2007_MEASURE_Z2)
-#define READ_X		(ADC_ON_12BIT | TSC2007_MEASURE_X)
-#define PWRDOWN		(TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
-
-struct ts_event {
-	u16	x;
-	u16	y;
-	u16	z1, z2;
-};
-
-struct tsc2007 {
-	struct input_dev	*input;
-	char			phys[32];
-
-	struct i2c_client	*client;
-
-	u16			model;
-	u16			x_plate_ohms;
-	u16			max_rt;
-	unsigned long		poll_period; /* in jiffies */
-	int			fuzzx;
-	int			fuzzy;
-	int			fuzzz;
-
-	unsigned		gpio;
-	int			irq;
-
-	wait_queue_head_t	wait;
-	bool			stopped;
-
-	int			(*get_pendown_state)(struct device *);
-	void			(*clear_penirq)(void);
-};
-
-static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
 {
 	s32 data;
 	u16 val;
@@ -128,7 +68,7 @@ static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc)
 	tsc2007_xfer(tsc, PWRDOWN);
 }
 
-static u32 tsc2007_calculate_pressure(struct tsc2007 *tsc, struct ts_event *tc)
+u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, struct ts_event *tc)
 {
 	u32 rt = 0;
 
@@ -137,7 +77,7 @@ static u32 tsc2007_calculate_pressure(struct tsc2007 *tsc, struct ts_event *tc)
 		tc->x = 0;
 
 	if (likely(tc->x && tc->z1)) {
-		/* compute touch pressure resistance using equation #1 */
+		/* compute touch resistance using equation #1 */
 		rt = tc->z2 - tc->z1;
 		rt *= tc->x;
 		rt *= tsc->x_plate_ohms;
@@ -148,7 +88,7 @@ static u32 tsc2007_calculate_pressure(struct tsc2007 *tsc, struct ts_event *tc)
 	return rt;
 }
 
-static bool tsc2007_is_pen_down(struct tsc2007 *ts)
+bool tsc2007_is_pen_down(struct tsc2007 *ts)
 {
 	/*
 	 * NOTE: We can't rely on the pressure to determine the pen down
@@ -180,9 +120,12 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
 	while (!ts->stopped && tsc2007_is_pen_down(ts)) {
 
 		/* pen is down, continue with the measurement */
-		tsc2007_read_values(ts, &tc);
 
-		rt = tsc2007_calculate_pressure(ts, &tc);
+		mutex_lock(&ts->mlock);
+		tsc2007_read_values(ts, &tc);
+		mutex_unlock(&ts->mlock);
+
+		rt = tsc2007_calculate_resistance(ts, &tc);
 
 		if (!rt && !ts->get_pendown_state) {
 			/*
@@ -195,9 +138,11 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
 
 		if (rt <= ts->max_rt) {
 			dev_dbg(&ts->client->dev,
-				"DOWN point(%4d,%4d), pressure (%4u)\n",
+				"DOWN point(%4d,%4d), resistance (%4u)\n",
 				tc.x, tc.y, rt);
 
+			rt = ts->max_rt - rt;
+
 			input_report_key(input, BTN_TOUCH, 1);
 			input_report_abs(input, ABS_X, tc.x);
 			input_report_abs(input, ABS_Y, tc.y);
@@ -375,7 +320,8 @@ static void tsc2007_call_exit_platform_hw(void *data)
 static int tsc2007_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
-	const struct tsc2007_platform_data *pdata = dev_get_platdata(&client->dev);
+	const struct tsc2007_platform_data *pdata =
+		dev_get_platdata(&client->dev);
 	struct tsc2007 *ts;
 	struct input_dev *input_dev;
 	int err;
@@ -404,7 +350,9 @@ static int tsc2007_probe(struct i2c_client *client,
 	ts->client = client;
 	ts->irq = client->irq;
 	ts->input = input_dev;
+
 	init_waitqueue_head(&ts->wait);
+	mutex_init(&ts->mlock);
 
 	snprintf(ts->phys, sizeof(ts->phys),
 		 "%s/input0", dev_name(&client->dev));
@@ -418,8 +366,7 @@ static int tsc2007_probe(struct i2c_client *client,
 
 	input_set_drvdata(input_dev, ts);
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
-	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 
 	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, ts->fuzzx, 0);
 	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, ts->fuzzy, 0);
@@ -455,6 +402,14 @@ static int tsc2007_probe(struct i2c_client *client,
 
 	tsc2007_stop(ts);
 
+	/* power down the chip (TSC2007_SETUP does not ACK on I2C) */
+	err = tsc2007_xfer(ts, PWRDOWN);
+	if (err < 0) {
+		dev_err(&client->dev,
+			"Failed to setup chip: %d\n", err);
+		return err;	/* chip does not respond */
+	}
+
 	err = input_register_device(input_dev);
 	if (err) {
 		dev_err(&client->dev,
@@ -462,6 +417,13 @@ static int tsc2007_probe(struct i2c_client *client,
 		return err;
 	}
 
+	err =  tsc2007_iio_configure(ts);
+	if (err) {
+		dev_err(&client->dev,
+			"Failed to register with IIO: %d\n", err);
+		return err;
+	}
+
 	return 0;
 }
 

drivers/input/touchscreen/tsc2007_iio.c

@@ -0,0 +1,140 @@
+/*
+ * Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG
+ *	Nikolaus Schaller <hns@goldelico.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include "tsc2007.h"
+
+struct tsc2007_iio {
+	struct tsc2007 *ts;
+};
+
+#define TSC2007_CHAN_IIO(_chan, _name, _type, _chan_info) \
+{ \
+	.datasheet_name = _name, \
+	.type = _type, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	\
+			BIT(_chan_info), \
+	.indexed = 1, \
+	.channel = _chan, \
+}
+
+static const struct iio_chan_spec tsc2007_iio_channel[] = {
+	TSC2007_CHAN_IIO(0, "x", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
+	TSC2007_CHAN_IIO(1, "y", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
+	TSC2007_CHAN_IIO(2, "z1", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
+	TSC2007_CHAN_IIO(3, "z2", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
+	TSC2007_CHAN_IIO(4, "adc", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
+	TSC2007_CHAN_IIO(5, "rt", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), /* Ohms? */
+	TSC2007_CHAN_IIO(6, "pen", IIO_PRESSURE, IIO_CHAN_INFO_RAW),
+	TSC2007_CHAN_IIO(7, "temp0", IIO_TEMP, IIO_CHAN_INFO_RAW),
+	TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW),
+};
+
+static int tsc2007_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct tsc2007_iio *iio = iio_priv(indio_dev);
+	struct tsc2007 *tsc = iio->ts;
+	int adc_chan = chan->channel;
+	int ret = 0;
+
+	if (adc_chan >= ARRAY_SIZE(tsc2007_iio_channel))
+		return -EINVAL;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	mutex_lock(&tsc->mlock);
+
+	switch (chan->channel) {
+	case 0:
+		*val = tsc2007_xfer(tsc, READ_X);
+		break;
+	case 1:
+		*val = tsc2007_xfer(tsc, READ_Y);
+		break;
+	case 2:
+		*val = tsc2007_xfer(tsc, READ_Z1);
+		break;
+	case 3:
+		*val = tsc2007_xfer(tsc, READ_Z2);
+		break;
+	case 4:
+		*val = tsc2007_xfer(tsc, (ADC_ON_12BIT | TSC2007_MEASURE_AUX));
+		break;
+	case 5: {
+		struct ts_event tc;
+
+		tc.x = tsc2007_xfer(tsc, READ_X);
+		tc.z1 = tsc2007_xfer(tsc, READ_Z1);
+		tc.z2 = tsc2007_xfer(tsc, READ_Z2);
+		*val = tsc2007_calculate_resistance(tsc, &tc);
+		break;
+	}
+	case 6:
+		*val = tsc2007_is_pen_down(tsc);
+		break;
+	case 7:
+		*val = tsc2007_xfer(tsc,
+				    (ADC_ON_12BIT | TSC2007_MEASURE_TEMP0));
+		break;
+	case 8:
+		*val = tsc2007_xfer(tsc,
+				    (ADC_ON_12BIT | TSC2007_MEASURE_TEMP1));
+		break;
+	}
+
+	/* Prepare for next touch reading - power down ADC, enable PENIRQ */
+	tsc2007_xfer(tsc, PWRDOWN);
+
+	mutex_unlock(&tsc->mlock);
+
+	ret = IIO_VAL_INT;
+
+	return ret;
+}
+
+static const struct iio_info tsc2007_iio_info = {
+	.read_raw = tsc2007_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+int tsc2007_iio_configure(struct tsc2007 *ts)
+{
+	struct iio_dev *indio_dev;
+	struct tsc2007_iio *iio;
+	int error;
+
+	indio_dev = devm_iio_device_alloc(&ts->client->dev, sizeof(*iio));
+	if (!indio_dev) {
+		dev_err(&ts->client->dev, "iio_device_alloc failed\n");
+		return -ENOMEM;
+	}
+
+	iio = iio_priv(indio_dev);
+	iio->ts = ts;
+
+	indio_dev->name = "tsc2007";
+	indio_dev->dev.parent = &ts->client->dev;
+	indio_dev->info = &tsc2007_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = tsc2007_iio_channel;
+	indio_dev->num_channels = ARRAY_SIZE(tsc2007_iio_channel);
+
+	error = devm_iio_device_register(&ts->client->dev, indio_dev);
+	if (error) {
+		dev_err(&ts->client->dev,
+			"iio_device_register() failed: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}