Kernel/linux
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2024-12-29 09:13:38 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

ASoC: wm0010: Convert to GPIO descriptors

Browse Source 
This converts the WM0010 codec to use GPIO descriptors.
It's a pretty straight-forward conversion also switching over
the single in-tree user in the S3C Cragganmore module
for S3C 6410.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-1-c4dab6f521ec@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Linus Walleij 2023-12-08 11:09:25 +01:00 committed by Mark Brown
parent 2cc14f52ae
commit b53d477756
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
3 changed files with 23 additions and 43 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
arch/arm/mach-s3c/mach-crag6410-module.c
View File

@ -32,9 +32,18 @@
#include "crag6410.h"
static struct gpiod_lookup_table wm0010_gpiod_table = {
.dev_id = "spi0.0", /* SPI device name */
.table = {
/* Active high for Glenfarclas Rev 2 */
GPIO_LOOKUP("GPION", 6,
"reset", GPIO_ACTIVE_HIGH),
{ },
},
};
static struct wm0010_pdata wm0010_pdata = {
.gpio_reset = S3C64XX_GPN(6),
.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
/* Intentionally left blank */
};
static struct spi_board_info wm1253_devs[] = {
@ -337,7 +346,8 @@ static const struct {
{ .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
{ .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
{ .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
.spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
.spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs),
.gpiod_table = &wm0010_gpiod_table },
{ .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
{ .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
{ .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",

6
include/sound/wm0010.h
View File

@ -11,12 +11,6 @@
#define WM0010_PDATA_H
struct wm0010_pdata {
int gpio_reset;
/* Set if there is an inverter between the GPIO controlling
* the reset signal and the device.
*/
int reset_active_high;
int irq_flags;
};

44
sound/soc/codecs/wm0010.c
View File

@ -18,7 +18,7 @@
#include <linux/firmware.h>
#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/regulator/consumer.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
@ -94,8 +94,7 @@ struct wm0010_priv {
struct wm0010_pdata pdata;
int gpio_reset;
int gpio_reset_value;
struct gpio_desc *reset;
struct regulator_bulk_data core_supplies[2];
struct regulator *dbvdd;
@ -174,8 +173,7 @@ static void wm0010_halt(struct snd_soc_component *component)
case WM0010_STAGE2:
case WM0010_FIRMWARE:
/* Remember to put chip back into reset */
gpio_set_value_cansleep(wm0010->gpio_reset,
wm0010->gpio_reset_value);
gpiod_set_value_cansleep(wm0010->reset, 1);
/* Disable the regulators */
regulator_disable(wm0010->dbvdd);
regulator_bulk_disable(ARRAY_SIZE(wm0010->core_supplies),
@ -610,7 +608,7 @@ static int wm0010_boot(struct snd_soc_component *component)
}
/* Release reset */
gpio_set_value_cansleep(wm0010->gpio_reset, !wm0010->gpio_reset_value);
gpiod_set_value_cansleep(wm0010->reset, 0);
spin_lock_irqsave(&wm0010->irq_lock, flags);
wm0010->state = WM0010_OUT_OF_RESET;
spin_unlock_irqrestore(&wm0010->irq_lock, flags);
@ -863,7 +861,6 @@ static int wm0010_probe(struct snd_soc_component *component)
static int wm0010_spi_probe(struct spi_device *spi)
{
unsigned long gpio_flags;
int ret;
int trigger;
int irq;
@ -903,31 +900,11 @@ static int wm0010_spi_probe(struct spi_device *spi)
return ret;
}
if (wm0010->pdata.gpio_reset) {
wm0010->gpio_reset = wm0010->pdata.gpio_reset;
if (wm0010->pdata.reset_active_high)
wm0010->gpio_reset_value = 1;
else
wm0010->gpio_reset_value = 0;
if (wm0010->gpio_reset_value)
gpio_flags = GPIOF_OUT_INIT_HIGH;
else
gpio_flags = GPIOF_OUT_INIT_LOW;
ret = devm_gpio_request_one(wm0010->dev, wm0010->gpio_reset,
gpio_flags, "wm0010 reset");
if (ret < 0) {
dev_err(wm0010->dev,
"Failed to request GPIO for DSP reset: %d\n",
ret);
return ret;
}
} else {
dev_err(wm0010->dev, "No reset GPIO configured\n");
return -EINVAL;
}
wm0010->reset = devm_gpiod_get(wm0010->dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(wm0010->reset))
return dev_err_probe(wm0010->dev, PTR_ERR(wm0010->reset),
"could not get RESET GPIO\n");
gpiod_set_consumer_name(wm0010->reset, "wm0010 reset");
wm0010->state = WM0010_POWER_OFF;
@ -972,8 +949,7 @@ static void wm0010_spi_remove(struct spi_device *spi)
{
struct wm0010_priv *wm0010 = spi_get_drvdata(spi);
gpio_set_value_cansleep(wm0010->gpio_reset,
wm0010->gpio_reset_value);
gpiod_set_value_cansleep(wm0010->reset, 1);
irq_set_irq_wake(wm0010->irq, 0);