media: atmel: properly get pm_runtime

There are several issues in the way the atmel driver handles
pm_runtime_get_sync():

- it doesn't check return codes;
- it doesn't properly decrement the usage_count on all places;
- it starts streaming even if pm_runtime_get_sync() fails.
- while it tries to get pm_runtime at the clock enable logic,
  it doesn't check if the operation was suceeded.

Replace all occurrences of it to use the new kAPI:
pm_runtime_resume_and_get(), which ensures that, if the
return code is not negative, the usage_count was incremented.

With that, add additional checks when this is called, in order
to ensure that errors will be properly addressed.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This commit is contained in:
Mauro Carvalho Chehab 2021-04-23 16:47:42 +02:00
parent e6695c89b3
commit dd97908ee3
2 changed files with 38 additions and 11 deletions

View File

@ -294,9 +294,13 @@ static int isc_wait_clk_stable(struct clk_hw *hw)
static int isc_clk_prepare(struct clk_hw *hw)
{
struct isc_clk *isc_clk = to_isc_clk(hw);
int ret;
if (isc_clk->id == ISC_ISPCK)
pm_runtime_get_sync(isc_clk->dev);
if (isc_clk->id == ISC_ISPCK) {
ret = pm_runtime_resume_and_get(isc_clk->dev);
if (ret < 0)
return ret;
}
return isc_wait_clk_stable(hw);
}
@ -353,9 +357,13 @@ static int isc_clk_is_enabled(struct clk_hw *hw)
{
struct isc_clk *isc_clk = to_isc_clk(hw);
u32 status;
int ret;
if (isc_clk->id == ISC_ISPCK)
pm_runtime_get_sync(isc_clk->dev);
if (isc_clk->id == ISC_ISPCK) {
ret = pm_runtime_resume_and_get(isc_clk->dev);
if (ret < 0)
return 0;
}
regmap_read(isc_clk->regmap, ISC_CLKSR, &status);
@ -807,7 +815,12 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
goto err_start_stream;
}
pm_runtime_get_sync(isc->dev);
ret = pm_runtime_resume_and_get(isc->dev);
if (ret < 0) {
v4l2_err(&isc->v4l2_dev, "RPM resume failed in subdev %d\n",
ret);
goto err_pm_get;
}
ret = isc_configure(isc);
if (unlikely(ret))
@ -838,7 +851,7 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
err_configure:
pm_runtime_put_sync(isc->dev);
err_pm_get:
v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0);
err_start_stream:
@ -1809,6 +1822,7 @@ static void isc_awb_work(struct work_struct *w)
u32 baysel;
unsigned long flags;
u32 min, max;
int ret;
/* streaming is not active anymore */
if (isc->stop)
@ -1831,7 +1845,9 @@ static void isc_awb_work(struct work_struct *w)
ctrls->hist_id = hist_id;
baysel = isc->config.sd_format->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT;
pm_runtime_get_sync(isc->dev);
ret = pm_runtime_resume_and_get(isc->dev);
if (ret < 0)
return;
/*
* only update if we have all the required histograms and controls

View File

@ -422,7 +422,9 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
struct frame_buffer *buf, *node;
int ret;
pm_runtime_get_sync(isi->dev);
ret = pm_runtime_resume_and_get(isi->dev);
if (ret < 0)
return ret;
/* Enable stream on the sub device */
ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 1);
@ -782,9 +784,10 @@ static int isi_enum_frameintervals(struct file *file, void *fh,
return 0;
}
static void isi_camera_set_bus_param(struct atmel_isi *isi)
static int isi_camera_set_bus_param(struct atmel_isi *isi)
{
u32 cfg1 = 0;
int ret;
/* set bus param for ISI */
if (isi->pdata.hsync_act_low)
@ -801,12 +804,16 @@ static void isi_camera_set_bus_param(struct atmel_isi *isi)
cfg1 |= ISI_CFG1_THMASK_BEATS_16;
/* Enable PM and peripheral clock before operate isi registers */
pm_runtime_get_sync(isi->dev);
ret = pm_runtime_resume_and_get(isi->dev);
if (ret < 0)
return ret;
isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
isi_writel(isi, ISI_CFG1, cfg1);
pm_runtime_put(isi->dev);
return 0;
}
/* -----------------------------------------------------------------------*/
@ -1085,7 +1092,11 @@ static int isi_graph_notify_complete(struct v4l2_async_notifier *notifier)
dev_err(isi->dev, "No supported mediabus format found\n");
return ret;
}
isi_camera_set_bus_param(isi);
ret = isi_camera_set_bus_param(isi);
if (ret) {
dev_err(isi->dev, "Can't wake up device\n");
return ret;
}
ret = isi_set_default_fmt(isi);
if (ret) {