Devicetree updates for v6.13:

Bindings:
 
 - Enable dtc "interrupt_provider" warnings for binding examples.
   Fix the warnings in fsl,mu-msi and ti,sci-inta due to this.
 
 - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton,  and
   altr,fpga-passive-serial to DT schema format
 
 - Add some documentation on the different forms of YAML text blocks
   which are a constant source of review comments
 
 - Fix some schema errors in constraints for arrays
 
 - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
 
 DT core:
 
 - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
 
 - Add some warnings on deprecated address handling
 
 - Rework early_init_dt_scan() so the arch can pass in the phys address
   of the DTB as __pa() is not always valid to use. This fixes a warning
   for arm64 with kexec.
 
 - Add and use some new DT graph iterators for iterating over ports and
   endpoints
 
 - Rework reserved-memory handling to be sized dynamically for fixed
   regions
 
 - Optimize of_modalias() to avoid a strlen() call
 
 - Constify struct device_node and property pointers where ever possible
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmc7qaoACgkQ+vtdtY28
 YcN54g/+Ifz4hQTSWV+VBhihovMMPiQUdxZ+MfJfPnPcZ7NJzaTf+zqhZyS4wQou
 v0pdtyR0B1fCM/EvKaYD+1aTTAQFEIT5Dqac+9ePwqaYqSk+yCTxyzW9m+P3rTPV
 THo8SGRss7T+Rs+2WaUGxphTJItMGIRdbBvoqK+82EdKFXXKw2BSD8tlJTWwbTam
 9xkrpUzw7f4FvVY8vVhRyOd5i8/v+FH8D65DMIT6ME9zRn4MzKVzCg6udgYeCBld
 C2XbV+wnyewtjrN2IX+2uQ2mheb7yJu3AEI3iFR5x/sRrsSLpisxrUl38xOOpxrM
 XxYtHgE3omjagQ+y+L2PMthlKvhFrXVXIvhUH8xxje5z1Vyq3VMfiABkHlMpAnys
 5LY4xEhvqDkPNo65UmjMiHxGW/xtcKsmAZBOp+HLerZfCJIFvl380fi8mNg/Sjvz
 7ExCSpzCPsHASZg7QCTplU3BUtg+067Ch/k8Hsn/Og73Pqm3xH4IezQZKwweN9ZT
 LC6OQBI7C3Yt1hom9qgUcA4H4/aaPxTVV7i0DGuAKh8Lon6SaoX2yFpweUBgbsL/
 c9DIW4vbYBIGASxxUbHlNMKvPCKACKmpFXhsnH5Waj+VWSOwsJ8bjGpH8PfMKdFW
 dyJB/r94GqCGpCW7+FC1qGmXiQJGkCo89pKBVjSf4Kj45ht/76o=
 =NCYS
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Enable dtc "interrupt_provider" warnings for binding examples. Fix
     the warnings in fsl,mu-msi and ti,sci-inta due to this.

   - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
     altr,fpga-passive-serial to DT schema format

   - Add some documentation on the different forms of YAML text blocks
     which are a constant source of review comments

   - Fix some schema errors in constraints for arrays

   - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462

  DT core:

   - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n

   - Add some warnings on deprecated address handling

   - Rework early_init_dt_scan() so the arch can pass in the phys
     address of the DTB as __pa() is not always valid to use. This fixes
     a warning for arm64 with kexec.

   - Add and use some new DT graph iterators for iterating over ports
     and endpoints

   - Rework reserved-memory handling to be sized dynamically for fixed
     regions

   - Optimize of_modalias() to avoid a strlen() call

   - Constify struct device_node and property pointers where ever
     possible"

* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
  of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
  dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
  of/address: Rework bus matching to avoid warnings
  of: WARN on deprecated #address-cells/#size-cells handling
  of/fdt: Don't use default address cell sizes for address translation
  dt-bindings: Enable dtc "interrupt_provider" warnings
  of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
  dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
  dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
  dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
  media: xilinx-tpg: use new of_graph functions
  fbdev: omapfb: use new of_graph functions
  gpu: drm: omapdrm: use new of_graph functions
  ASoC: audio-graph-card2: use new of_graph functions
  ASoC: audio-graph-card: use new of_graph functions
  ASoC: test-component: use new of_graph functions
  of: property: use new of_graph functions
  of: property: add of_graph_get_next_port_endpoint()
  of: property: add of_graph_get_next_port()
  of: module: remove strlen() call in of_modalias()
  ...

Documentation/devicetree/bindings/Makefile

@@ -56,7 +56,6 @@ DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_all_cmd)))
 override DTC_FLAGS := \
 	-Wno-avoid_unnecessary_addr_size \
 	-Wno-graph_child_address \
-	-Wno-interrupt_provider \
 	-Wno-unique_unit_address \
 	-Wunique_unit_address_if_enabled
 

Documentation/devicetree/bindings/cache/l2c2x0.yaml

@@ -100,9 +100,8 @@ properties:
       filter. Addresses in the filter window are directed to the M1 port. Other
       addresses will go to the M0 port.
     $ref: /schemas/types.yaml#/definitions/uint32-array
-    items:
+    minItems: 2
-      minItems: 2
+    maxItems: 2
-      maxItems: 2
 
   arm,io-coherent:
     description: indicates that the system is operating in an hardware

Documentation/devicetree/bindings/cache/qcom,llcc.yaml

@@ -39,11 +39,11 @@ properties:
 
   reg:
     minItems: 2
-    maxItems: 9
+    maxItems: 10
 
   reg-names:
     minItems: 2
-    maxItems: 9
+    maxItems: 10
 
   interrupts:
     maxItems: 1
@@ -134,7 +134,6 @@ allOf:
               - qcom,qdu1000-llcc
               - qcom,sc8180x-llcc
               - qcom,sc8280xp-llcc
-              - qcom,x1e80100-llcc
     then:
       properties:
         reg:
@@ -160,6 +159,39 @@ allOf:
             - const: llcc7_base
             - const: llcc_broadcast_base
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,x1e80100-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC4 base register region
+            - description: LLCC5 base register region
+            - description: LLCC6 base register region
+            - description: LLCC7 base register region
+            - description: LLCC broadcast base register region
+            - description: LLCC broadcast AND register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc4_base
+            - const: llcc5_base
+            - const: llcc6_base
+            - const: llcc7_base
+            - const: llcc_broadcast_base
+            - const: llcc_broadcast_and_base
+
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/dma/dma-common.yaml

@@ -32,10 +32,9 @@ properties:
       The first item in the array is for channels 0-31, the second is for
       channels 32-63, etc.
     $ref: /schemas/types.yaml#/definitions/uint32-array
-    items:
+    minItems: 1
-      minItems: 1
+    # Should be enough
-      # Should be enough
+    maxItems: 255
-      maxItems: 255
 
   dma-channels:
     $ref: /schemas/types.yaml#/definitions/uint32

Documentation/devicetree/bindings/example-schema.yaml

@@ -262,4 +262,5 @@ examples:
         reg-names = "core", "aux";
         interrupts = <10>;
         interrupt-controller;
+        #interrupt-cells = <2>;
     };

Documentation/devicetree/bindings/fpga/altera-passive-serial.txt

@@ -1,29 +0,0 @@
-Altera Passive Serial SPI FPGA Manager
-
-Altera FPGAs support a method of loading the bitstream over what is
-referred to as "passive serial".
-The passive serial link is not technically SPI, and might require extra
-circuits in order to play nicely with other SPI slaves on the same bus.
-
-See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf
-
-Required properties:
-- compatible: Must be one of the following:
-	"altr,fpga-passive-serial",
-	"altr,fpga-arria10-passive-serial"
-- reg: SPI chip select of the FPGA
-- nconfig-gpios: config pin (referred to as nCONFIG in the manual)
-- nstat-gpios: status pin (referred to as nSTATUS in the manual)
-
-Optional properties:
-- confd-gpios: confd pin (referred to as CONF_DONE in the manual)
-
-Example:
-	fpga: fpga@0 {
-		compatible = "altr,fpga-passive-serial";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-		nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
-		confd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
-	};

Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml

@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,fpga-passive-serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera Passive Serial SPI FPGA Manager
+
+maintainers:
+  - Fabio Estevam <festevam@denx.de>
+
+description: |
+  Altera FPGAs support a method of loading the bitstream over what is
+  referred to as "passive serial".
+  The passive serial link is not technically SPI, and might require extra
+  circuits in order to play nicely with other SPI slaves on the same bus.
+
+  See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - altr,fpga-passive-serial
+      - altr,fpga-arria10-passive-serial
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  reg:
+    maxItems: 1
+
+  nconfig-gpios:
+    description:
+      Config pin (referred to as nCONFIG in the manual).
+    maxItems: 1
+
+  nstat-gpios:
+    description:
+      Status pin (referred to as nSTATUS in the manual).
+    maxItems: 1
+
+  confd-gpios:
+    description:
+      confd pin (referred to as CONF_DONE in the manual)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - nconfig-gpios
+  - nstat-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      fpga@0 {
+        compatible = "altr,fpga-passive-serial";
+        reg = <0>;
+        nconfig-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+        nstat-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+        confd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+      };
+    };
+...

Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt

@@ -1,22 +0,0 @@
-Zodiac Inflight Innovations RAVE Supervisory Processor Power Button Bindings
-
-RAVE SP input device is a "MFD cell" device corresponding to power
-button functionality of RAVE Supervisory Processor. It is expected
-that its Device Tree node is specified as a child of the node
-corresponding to the parent RAVE SP device (as documented in
-Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
-
-Required properties:
-
-- compatible: Should be "zii,rave-sp-pwrbutton"
-
-Example:
-
-	rave-sp {
-		compatible = "zii,rave-sp-rdu1";
-		current-speed = <38400>;
-
-		pwrbutton {
-			compatible = "zii,rave-sp-pwrbutton";
-		};
-	}

Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml

@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/zii,rave-sp-pwrbutton.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac Inflight Innovations RAVE Supervisory Processor Power Button
+
+maintainers:
+  - Frank Li <Frank.li@nxp.com>
+
+description:
+  RAVE SP input device is a "MFD cell" device corresponding to power
+  button functionality of RAVE Supervisory Processor. It is expected
+  that its Device Tree node is specified as a child of the node
+  corresponding to the parent RAVE SP device (as documented in
+  Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml)
+
+properties:
+  compatible:
+    const: zii,rave-sp-pwrbutton
+
+required:
+  - compatible
+
+allOf:
+  - $ref: input.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pwrbutton {
+        compatible = "zii,rave-sp-pwrbutton";
+    };
+

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml

@@ -132,10 +132,9 @@ properties:
       Address property. Base address of an alias of the GICD region containing
       only the {SET,CLR}SPI registers to be used if isolation is required,
       and if supported by the HW.
-    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
-    items:
+      - $ref: /schemas/types.yaml#/definitions/uint32
-      minItems: 1
+      - $ref: /schemas/types.yaml#/definitions/uint64
-      maxItems: 2
 
   ppi-partitions:
     type: object
@@ -223,9 +222,8 @@ patternProperties:
           (u32, u32) tuple describing the untranslated
           address and size of the pre-ITS window.
         $ref: /schemas/types.yaml#/definitions/uint32-array
-        items:
+        minItems: 2
-          minItems: 2
+        maxItems: 2
-          maxItems: 2
 
     required:
       - compatible

Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml

@@ -62,8 +62,6 @@ properties:
       - const: processor-a-side
       - const: processor-b-side
 
-  interrupt-controller: true
-
   msi-controller: true
 
   "#msi-cells":
@@ -73,7 +71,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - interrupt-controller
   - msi-controller
   - "#msi-cells"
 
@@ -88,7 +85,6 @@ examples:
         compatible = "fsl,imx6sx-mu-msi";
         msi-controller;
         #msi-cells = <0>;
-        interrupt-controller;
         reg = <0x5d270000 0x10000>,     /* A side */
               <0x5d300000 0x10000>;     /* B side */
         reg-names = "processor-a-side", "processor-b-side";

Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml

@@ -29,6 +29,7 @@ properties:
           - qcom,qdu1000-pdc
           - qcom,sa8255p-pdc
           - qcom,sa8775p-pdc
+          - qcom,sar2130p-pdc
           - qcom,sc7180-pdc
           - qcom,sc7280-pdc
           - qcom,sc8180x-pdc

Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml

@@ -109,6 +109,7 @@ examples:
             compatible = "ti,sci-inta";
             reg = <0x0 0x33d00000 0x0 0x100000>;
             interrupt-controller;
+            #interrupt-cells = <0>;
             msi-controller;
             interrupt-parent = <&main_navss_intr>;
             ti,sci = <&dmsc>;

Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml

@@ -135,8 +135,7 @@ properties:
 
           data-lanes:
             $ref: /schemas/media/video-interfaces.yaml#/properties/data-lanes
-            items:
+            maxItems: 4
-              maxItems: 4
             description:
               This property is for lane reordering between the THP7312 and the imaging
               sensor that it is connected to.

Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml

@@ -66,9 +66,8 @@ patternProperties:
 
       samsung,srom-timing:
         $ref: /schemas/types.yaml#/definitions/uint32-array
-        items:
+        minItems: 6
-          minItems: 6
+        maxItems: 6
-          maxItems: 6
         description: |
           Array of 6 integers, specifying bank timings in the following order:
           Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.

Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

@@ -92,9 +92,8 @@ properties:
       may have two component regions -- base and extended -- so
       this information cannot be deduced from the dma-ranges.
     $ref: /schemas/types.yaml#/definitions/uint64-array
-    items:
+    minItems: 1
-      minItems: 1
+    maxItems: 3
-      maxItems: 3
 
   resets:
     minItems: 1

Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml

@@ -55,8 +55,7 @@ properties:
 
   qcom,smem:
     $ref: /schemas/types.yaml#/definitions/uint32-array
-    items:
+    maxItems: 2
-      maxItems: 2
     description:
       Two identifiers of the inbound and outbound smem items used for this edge.
 

Documentation/devicetree/bindings/trivial-devices.yaml

@@ -297,6 +297,8 @@ properties:
           - nuvoton,w83773g
             # OKI ML86V7667 video decoder
           - oki,ml86v7667
+            # ON Semiconductor ADT7462 Temperature, Voltage Monitor and Fan Controller
+          - onnn,adt7462
             # 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
           - plx,pex8648
             # Pulsedlight LIDAR range-finding sensor

Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt

@@ -1,39 +0,0 @@
-Zodiac Inflight Innovations RAVE Supervisory Processor Watchdog Bindings
-
-RAVE SP watchdog device is a "MFD cell" device corresponding to
-watchdog functionality of RAVE Supervisory Processor. It is expected
-that its Device Tree node is specified as a child of the node
-corresponding to the parent RAVE SP device (as documented in
-Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
-
-Required properties:
-
-- compatible: Depending on wire protocol implemented by RAVE SP
-  firmware, should be one of:
-	- "zii,rave-sp-watchdog"
-	- "zii,rave-sp-watchdog-legacy"
-
-Optional properties:
-
-- wdt-timeout:	Two byte nvmem cell specified as per
-		Documentation/devicetree/bindings/nvmem/nvmem.txt
-
-Example:
-
-	rave-sp {
-		compatible = "zii,rave-sp-rdu1";
-		current-speed = <38400>;
-
-		eeprom {
-			wdt_timeout: wdt-timeout@8E {
-				reg = <0x8E 2>;
-			};
-		};
-
-		watchdog {
-			compatible = "zii,rave-sp-watchdog";
-			nvmem-cells = <&wdt_timeout>;
-			nvmem-cell-names = "wdt-timeout";
-		};
-	}
-

Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/zii,rave-sp-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac Inflight Innovations RAVE Supervisory Processor Watchdog
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  RAVE SP watchdog device is a "MFD cell" device corresponding to
+  watchdog functionality of RAVE Supervisory Processor. It is expected
+  that its Device Tree node is specified as a child of the node
+  corresponding to the parent RAVE SP device (as documented in
+  Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml)
+
+properties:
+  compatible:
+    enum:
+      - zii,rave-sp-watchdog
+      - zii,rave-sp-watchdog-legacy
+
+  nvmem-cell-names:
+    items:
+      - const: wdt_timeout
+
+  nvmem-cells:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: watchdog.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog {
+        compatible = "zii,rave-sp-watchdog";
+        nvmem-cells = <&wdt_timeout>;
+        nvmem-cell-names = "wdt_timeout";
+    };
+

Documentation/devicetree/bindings/writing-schema.rst

@@ -43,6 +43,36 @@ description
   or device does, standards the device conforms to, and links to datasheets for
   more information.
 
+  The YAML format has several options for defining the formatting of the text
+  block. The options are controlled with indicator characters following the key
+  (e.g. "description: \|"). The minimum formatting needed for a block should be
+  used. The formatting controls can not only affect whether the YAML can be
+  parsed correctly, but are important when the text blocks are rendered to
+  another form. The options are as follows.
+
+  The default without any indicators is flowed, plain scalar style where single
+  line breaks and leading whitespace are stripped. Paragraphs are delimited by
+  blank lines (i.e. double line break). This style cannot contain ": " in it as
+  it will be interpretted as a key. Any " #" sequence will be interpretted as
+  a comment. There's other restrictions on characters as well. Most
+  restrictions are on what the first character can be.
+
+  The second style is folded which is indicated by ">" character. In addition
+  to maintaining line breaks on double line breaks, the folded style also
+  maintains leading whitespace beyond indentation of the first line. The line
+  breaks on indented lines are also maintained.
+
+  The third style is literal which is indicated by "\|" character. The literal
+  style maintains all line breaks and whitespace (beyond indentation of the
+  first line).
+
+  The above is not a complete description of YAML text blocks. More details on
+  multi-line YAML text blocks can be found online:
+
+  https://yaml-multiline.info/
+
+  https://www.yaml.info/learn/quote.html
+
 select
   Optional. A json-schema used to match nodes for applying the
   schema. By default, without 'select', nodes are matched against their possible

arch/arc/kernel/devtree.c

@@ -62,7 +62,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt)
 	const struct machine_desc *mdesc;
 	unsigned long dt_root;
 
-	if (!early_init_dt_scan(dt))
+	if (!early_init_dt_scan(dt, __pa(dt)))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(NULL, arch_get_next_mach);

arch/arm/kernel/devtree.c

@@ -200,7 +200,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt_virt)
 
 	mdesc_best = &__mach_desc_GENERIC_DT;
 
-	if (!dt_virt || !early_init_dt_verify(dt_virt))
+	if (!dt_virt || !early_init_dt_verify(dt_virt, __pa(dt_virt)))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);

arch/arm64/kernel/setup.c

@@ -176,7 +176,11 @@ static void __init setup_machine_fdt(phys_addr_t dt_phys)
 	if (dt_virt)
 		memblock_reserve(dt_phys, size);
 
-	if (!dt_virt || !early_init_dt_scan(dt_virt)) {
+	/*
+	 * dt_virt is a fixmap address, hence __pa(dt_virt) can't be used.
+	 * Pass dt_phys directly.
+	 */
+	if (!early_init_dt_scan(dt_virt, dt_phys)) {
 		pr_crit("\n"
 			"Error: invalid device tree blob at physical address %pa (virtual address 0x%px)\n"
 			"The dtb must be 8-byte aligned and must not exceed 2 MB in size\n"

arch/csky/kernel/setup.c

@@ -112,9 +112,9 @@ asmlinkage __visible void __init csky_start(unsigned int unused,
 	pre_trap_init();
 
 	if (dtb_start == NULL)
-		early_init_dt_scan(__dtb_start);
+		early_init_dt_scan(__dtb_start, __pa(dtb_start));
 	else
-		early_init_dt_scan(dtb_start);
+		early_init_dt_scan(dtb_start, __pa(dtb_start));
 
 	start_kernel();
 

arch/loongarch/kernel/setup.c

@@ -291,7 +291,7 @@ static void __init fdt_setup(void)
 	if (!fdt_pointer || fdt_check_header(fdt_pointer))
 		return;
 
-	early_init_dt_scan(fdt_pointer);
+	early_init_dt_scan(fdt_pointer, __pa(fdt_pointer));
 	early_init_fdt_reserve_self();
 
 	max_low_pfn = PFN_PHYS(memblock_end_of_DRAM());

arch/microblaze/kernel/prom.c

@@ -18,7 +18,7 @@ void __init early_init_devtree(void *params)
 {
 	pr_debug(" -> early_init_devtree(%p)\n", params);
 
-	early_init_dt_scan(params);
+	early_init_dt_scan(params, __pa(params));
 	if (!strlen(boot_command_line))
 		strscpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 

arch/mips/kernel/prom.c

@@ -41,7 +41,7 @@ char *mips_get_machine_name(void)
 
 void __init __dt_setup_arch(void *bph)
 {
-	if (!early_init_dt_scan(bph))
+	if (!early_init_dt_scan(bph, __pa(bph)))
 		return;
 
 	mips_set_machine_name(of_flat_dt_get_machine_name());

arch/mips/kernel/relocate.c

@@ -337,7 +337,7 @@ void *__init relocate_kernel(void)
 #if defined(CONFIG_USE_OF)
 	/* Deal with the device tree */
 	fdt = plat_get_fdt();
-	early_init_dt_scan(fdt);
+	early_init_dt_scan(fdt, __pa(fdt));
 	if (boot_command_line[0]) {
 		/* Boot command line was passed in device tree */
 		strscpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);

arch/nios2/kernel/prom.c

@@ -27,7 +27,7 @@ void __init early_init_devtree(void *params)
 	if (be32_to_cpup((__be32 *)CONFIG_NIOS2_DTB_PHYS_ADDR) ==
 		 OF_DT_HEADER) {
 		params = (void *)CONFIG_NIOS2_DTB_PHYS_ADDR;
-		early_init_dt_scan(params);
+		early_init_dt_scan(params, __pa(params));
 		return;
 	}
 #endif
@@ -37,5 +37,5 @@ void __init early_init_devtree(void *params)
 		params = (void *)__dtb_start;
 #endif
 
-	early_init_dt_scan(params);
+	early_init_dt_scan(params, __pa(params));
 }

arch/openrisc/kernel/prom.c

@@ -22,6 +22,6 @@
 
 void __init early_init_devtree(void *params)
 {
-	early_init_dt_scan(params);
+	early_init_dt_scan(params, __pa(params));
 	memblock_allow_resize();
 }

arch/powerpc/kernel/dt_cpu_ftrs.c

@@ -867,7 +867,7 @@ bool __init dt_cpu_ftrs_init(void *fdt)
 	using_dt_cpu_ftrs = false;
 
 	/* Setup and verify the FDT, if it fails we just bail */
-	if (!early_init_dt_verify(fdt))
+	if (!early_init_dt_verify(fdt, __pa(fdt)))
 		return false;
 
 	if (!of_scan_flat_dt(fdt_find_cpu_features, NULL))

arch/powerpc/kernel/prom.c

@@ -791,7 +791,7 @@ void __init early_init_devtree(void *params)
 	DBG(" -> early_init_devtree(%px)\n", params);
 
 	/* Too early to BUG_ON(), do it by hand */
-	if (!early_init_dt_verify(params))
+	if (!early_init_dt_verify(params, __pa(params)))
 		panic("BUG: Failed verifying flat device tree, bad version?");
 
 	of_scan_flat_dt(early_init_dt_scan_model, NULL);

arch/powerpc/platforms/pseries/plpks.c

@@ -683,7 +683,7 @@ void __init plpks_early_init_devtree(void)
 out:
 	fdt_nop_property(fdt, chosen_node, "ibm,plpks-pw");
 	// Since we've cleared the password, we must update the FDT checksum
-	early_init_dt_verify(fdt);
+	early_init_dt_verify(fdt, __pa(fdt));
 }
 
 static __init int pseries_plpks_init(void)

arch/riscv/kernel/setup.c

@@ -227,7 +227,7 @@ static void __init init_resources(void)
 static void __init parse_dtb(void)
 {
 	/* Early scan of device tree from init memory */
-	if (early_init_dt_scan(dtb_early_va)) {
+	if (early_init_dt_scan(dtb_early_va, __pa(dtb_early_va))) {
 		const char *name = of_flat_dt_get_machine_name();
 
 		if (name) {

arch/sh/kernel/setup.c

@@ -255,7 +255,7 @@ void __ref sh_fdt_init(phys_addr_t dt_phys)
 	dt_virt = phys_to_virt(dt_phys);
 #endif
 
-	if (!dt_virt || !early_init_dt_scan(dt_virt)) {
+	if (!dt_virt || !early_init_dt_scan(dt_virt, __pa(dt_virt))) {
 		pr_crit("Error: invalid device tree blob"
 			" at physical address %p\n", (void *)dt_phys);
 

arch/um/kernel/dtb.c

@@ -17,7 +17,7 @@ void uml_dtb_init(void)
 
 	area = uml_load_file(dtb, &size);
 	if (area) {
-		if (!early_init_dt_scan(area)) {
+		if (!early_init_dt_scan(area, __pa(area))) {
 			pr_err("invalid DTB %s\n", dtb);
 			memblock_free(area, size);
 			return;

arch/x86/kernel/devicetree.c

@@ -305,7 +305,7 @@ void __init x86_flattree_get_config(void)
 			map_len = size;
 		}
 
-		early_init_dt_verify(dt);
+		early_init_dt_verify(dt, __pa(dt));
 	}
 
 	unflatten_and_copy_device_tree();

arch/xtensa/kernel/setup.c

@@ -216,7 +216,7 @@ static int __init xtensa_dt_io_area(unsigned long node, const char *uname,
 
 void __init early_init_devtree(void *params)
 {
-	early_init_dt_scan(params);
+	early_init_dt_scan(params, __pa(params));
 	of_scan_flat_dt(xtensa_dt_io_area, NULL);
 
 	if (!command_line[0])

drivers/gpu/drm/omapdrm/dss/dpi.c

@@ -16,6 +16,7 @@
 #include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/string.h>
@@ -709,7 +710,7 @@ int dpi_init_port(struct dss_device *dss, struct platform_device *pdev,
 	if (!dpi)
 		return -ENOMEM;
 
-	ep = of_get_next_child(port, NULL);
+	ep = of_graph_get_next_port_endpoint(port, NULL);
 	if (!ep)
 		return 0;
 

drivers/gpu/drm/omapdrm/dss/sdi.c

@@ -11,6 +11,7 @@
 #include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/string.h>
@@ -346,7 +347,7 @@ int sdi_init_port(struct dss_device *dss, struct platform_device *pdev,
 	if (!sdi)
 		return -ENOMEM;
 
-	ep = of_get_next_child(port, NULL);
+	ep = of_graph_get_next_port_endpoint(port, NULL);
 	if (!ep) {
 		r = 0;
 		goto err_free;

drivers/media/platform/xilinx/xilinx-tpg.c

@@ -13,6 +13,7 @@
 #include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/xilinx-v4l2-controls.h>
 
@@ -711,22 +712,13 @@ static int xtpg_parse_of(struct xtpg_device *xtpg)
 {
 	struct device *dev = xtpg->xvip.dev;
 	struct device_node *node = xtpg->xvip.dev->of_node;
-	struct device_node *ports;
-	struct device_node *port;
 	unsigned int nports = 0;
 	bool has_endpoint = false;
 
-	ports = of_get_child_by_name(node, "ports");
+	for_each_of_graph_port(node, port) {
-	if (ports == NULL)
-		ports = node;
-
-	for_each_child_of_node(ports, port) {
 		const struct xvip_video_format *format;
 		struct device_node *endpoint;
 
-		if (!of_node_name_eq(port, "port"))
-			continue;
-
 		format = xvip_of_get_format(port);
 		if (IS_ERR(format)) {
 			dev_err(dev, "invalid format in DT");
@@ -744,7 +736,7 @@ static int xtpg_parse_of(struct xtpg_device *xtpg)
 		}
 
 		if (nports == 0) {
-			endpoint = of_get_next_child(port, NULL);
+			endpoint = of_graph_get_next_port_endpoint(port, NULL);
 			if (endpoint)
 				has_endpoint = true;
 			of_node_put(endpoint);

drivers/of/.kunitconfig

@@ -1,4 +1,5 @@
 CONFIG_KUNIT=y
 CONFIG_OF=y
 CONFIG_OF_KUNIT_TEST=y
+CONFIG_OF_OVERLAY=y
 CONFIG_OF_OVERLAY_KUNIT_TEST=y

drivers/of/Kconfig

@@ -111,7 +111,7 @@ config OF_OVERLAY_KUNIT_TEST
 	tristate "Device Tree overlay KUnit tests" if !KUNIT_ALL_TESTS
 	depends on KUNIT
 	default KUNIT_ALL_TESTS
-	select OF_OVERLAY
+	select DTC
 	help
 	  This option builds KUnit unit tests for the device tree overlay code.
 

drivers/of/address.c

@@ -147,7 +147,7 @@ static unsigned int of_bus_pci_get_flags(const __be32 *addr)
  * PCI bus specific translator
  */
 
-static bool of_node_is_pcie(struct device_node *np)
+static bool of_node_is_pcie(const struct device_node *np)
 {
 	bool is_pcie = of_node_name_eq(np, "pcie");
 
@@ -230,8 +230,8 @@ static int __of_address_resource_bounds(struct resource *r, u64 start, u64 size)
  * To guard against that we try to register the IO range first.
  * If that fails we know that pci_address_to_pio() will do too.
  */
-int of_pci_range_to_resource(struct of_pci_range *range,
+int of_pci_range_to_resource(const struct of_pci_range *range,
-			     struct device_node *np, struct resource *res)
+			     const struct device_node *np, struct resource *res)
 {
 	u64 start;
 	int err;
@@ -333,14 +333,18 @@ static unsigned int of_bus_isa_get_flags(const __be32 *addr)
 
 static int of_bus_default_flags_match(struct device_node *np)
 {
-	return of_bus_n_addr_cells(np) == 3;
+	/*
+	 * Check for presence first since of_bus_n_addr_cells() will warn when
+	 * walking parent nodes.
+	 */
+	return of_property_present(np, "#address-cells") && (of_bus_n_addr_cells(np) == 3);
 }
 
 /*
  * Array of bus specific translators
  */
 
-static struct of_bus of_busses[] = {
+static const struct of_bus of_busses[] = {
 #ifdef CONFIG_PCI
 	/* PCI */
 	{
@@ -388,7 +392,7 @@ static struct of_bus of_busses[] = {
 	},
 };
 
-static struct of_bus *of_match_bus(struct device_node *np)
+static const struct of_bus *of_match_bus(struct device_node *np)
 {
 	int i;
 
@@ -399,7 +403,7 @@ static struct of_bus *of_match_bus(struct device_node *np)
 	return NULL;
 }
 
-static int of_empty_ranges_quirk(struct device_node *np)
+static int of_empty_ranges_quirk(const struct device_node *np)
 {
 	if (IS_ENABLED(CONFIG_PPC)) {
 		/* To save cycles, we cache the result for global "Mac" setting */
@@ -419,8 +423,8 @@ static int of_empty_ranges_quirk(struct device_node *np)
 	return false;
 }
 
-static int of_translate_one(struct device_node *parent, struct of_bus *bus,
+static int of_translate_one(const struct device_node *parent, const struct of_bus *bus,
-			    struct of_bus *pbus, __be32 *addr,
+			    const struct of_bus *pbus, __be32 *addr,
 			    int na, int ns, int pna, const char *rprop)
 {
 	const __be32 *ranges;
@@ -505,7 +509,7 @@ static u64 __of_translate_address(struct device_node *node,
 {
 	struct device_node *dev __free(device_node) = of_node_get(node);
 	struct device_node *parent __free(device_node) = get_parent(dev);
-	struct of_bus *bus, *pbus;
+	const struct of_bus *bus, *pbus;
 	__be32 addr[OF_MAX_ADDR_CELLS];
 	int na, ns, pna, pns;
 
@@ -690,7 +694,7 @@ const __be32 *__of_get_address(struct device_node *dev, int index, int bar_no,
 	const __be32 *prop;
 	unsigned int psize;
 	struct device_node *parent __free(device_node) = of_get_parent(dev);
-	struct of_bus *bus;
+	const struct of_bus *bus;
 	int onesize, i, na, ns;
 
 	if (parent == NULL)
@@ -701,16 +705,16 @@ const __be32 *__of_get_address(struct device_node *dev, int index, int bar_no,
 	if (strcmp(bus->name, "pci") && (bar_no >= 0))
 		return NULL;
 
-	bus->count_cells(dev, &na, &ns);
-	if (!OF_CHECK_ADDR_COUNT(na))
-		return NULL;
-
 	/* Get "reg" or "assigned-addresses" property */
 	prop = of_get_property(dev, bus->addresses, &psize);
 	if (prop == NULL)
 		return NULL;
 	psize /= 4;
 
+	bus->count_cells(dev, &na, &ns);
+	if (!OF_CHECK_ADDR_COUNT(na))
+		return NULL;
+
 	onesize = na + ns;
 	for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) {
 		u32 val = be32_to_cpu(prop[0]);
@@ -1030,7 +1034,7 @@ EXPORT_SYMBOL_GPL(of_dma_is_coherent);
  * This is currently only enabled on builds that support Apple ARM devices, as
  * an optimization.
  */
-static bool of_mmio_is_nonposted(struct device_node *np)
+static bool of_mmio_is_nonposted(const struct device_node *np)
 {
 	if (!IS_ENABLED(CONFIG_ARCH_APPLE))
 		return false;

drivers/of/base.c

@@ -87,15 +87,25 @@ static bool __of_node_is_type(const struct device_node *np, const char *type)
 	return np && match && type && !strcmp(match, type);
 }
 
+#define EXCLUDED_DEFAULT_CELLS_PLATFORMS ( \
+	IS_ENABLED(CONFIG_SPARC) \
+)
+
 int of_bus_n_addr_cells(struct device_node *np)
 {
 	u32 cells;
 
-	for (; np; np = np->parent)
+	for (; np; np = np->parent) {
 		if (!of_property_read_u32(np, "#address-cells", &cells))
 			return cells;
-
+		/*
-	/* No #address-cells property for the root node */
+		 * Default root value and walking parent nodes for "#address-cells"
+		 * is deprecated. Any platforms which hit this warning should
+		 * be added to the excluded list.
+		 */
+		WARN_ONCE(!EXCLUDED_DEFAULT_CELLS_PLATFORMS,
+			  "Missing '#address-cells' in %pOF\n", np);
+	}
 	return OF_ROOT_NODE_ADDR_CELLS_DEFAULT;
 }
 
@@ -112,11 +122,17 @@ int of_bus_n_size_cells(struct device_node *np)
 {
 	u32 cells;
 
-	for (; np; np = np->parent)
+	for (; np; np = np->parent) {
 		if (!of_property_read_u32(np, "#size-cells", &cells))
 			return cells;
-
+		/*
-	/* No #size-cells property for the root node */
+		 * Default root value and walking parent nodes for "#size-cells"
+		 * is deprecated. Any platforms which hit this warning should
+		 * be added to the excluded list.
+		 */
+		WARN_ONCE(!EXCLUDED_DEFAULT_CELLS_PLATFORMS,
+			  "Missing '#size-cells' in %pOF\n", np);
+	}
 	return OF_ROOT_NODE_SIZE_CELLS_DEFAULT;
 }
 
@@ -270,7 +286,7 @@ EXPORT_SYMBOL(of_find_all_nodes);
 const void *__of_get_property(const struct device_node *np,
 			      const char *name, int *lenp)
 {
-	struct property *pp = __of_find_property(np, name, lenp);
+	const struct property *pp = __of_find_property(np, name, lenp);
 
 	return pp ? pp->value : NULL;
 }
@@ -282,7 +298,7 @@ const void *__of_get_property(const struct device_node *np,
 const void *of_get_property(const struct device_node *np, const char *name,
 			    int *lenp)
 {
-	struct property *pp = of_find_property(np, name, lenp);
+	const struct property *pp = of_find_property(np, name, lenp);
 
 	return pp ? pp->value : NULL;
 }
@@ -321,7 +337,7 @@ EXPORT_SYMBOL(of_get_property);
 static int __of_device_is_compatible(const struct device_node *device,
 				     const char *compat, const char *type, const char *name)
 {
-	struct property *prop;
+	const struct property *prop;
 	const char *cp;
 	int index = 0, score = 0;
 
@@ -771,7 +787,7 @@ struct device_node *of_get_child_by_name(const struct device_node *node,
 }
 EXPORT_SYMBOL(of_get_child_by_name);
 
-struct device_node *__of_find_node_by_path(struct device_node *parent,
+struct device_node *__of_find_node_by_path(const struct device_node *parent,
 						const char *path)
 {
 	struct device_node *child;
@@ -828,7 +844,7 @@ struct device_node *__of_find_node_by_full_path(struct device_node *node,
 struct device_node *of_find_node_opts_by_path(const char *path, const char **opts)
 {
 	struct device_node *np = NULL;
-	struct property *pp;
+	const struct property *pp;
 	unsigned long flags;
 	const char *separator = strchr(path, ':');
 
@@ -974,7 +990,7 @@ struct device_node *of_find_node_with_property(struct device_node *from,
 	const char *prop_name)
 {
 	struct device_node *np;
-	struct property *pp;
+	const struct property *pp;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&devtree_lock, flags);
@@ -1769,7 +1785,7 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np,
  */
 void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align))
 {
-	struct property *pp;
+	const struct property *pp;
 
 	of_aliases = of_find_node_by_path("/aliases");
 	of_chosen = of_find_node_by_path("/chosen");
@@ -1840,7 +1856,7 @@ void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align))
  *
  * Return: The alias id if found.
  */
-int of_alias_get_id(struct device_node *np, const char *stem)
+int of_alias_get_id(const struct device_node *np, const char *stem)
 {
 	struct alias_prop *app;
 	int id = -ENODEV;
@@ -1898,7 +1914,7 @@ EXPORT_SYMBOL_GPL(of_alias_get_highest_id);
  *
  * Return: TRUE if console successfully setup. Otherwise return FALSE.
  */
-bool of_console_check(struct device_node *dn, char *name, int index)
+bool of_console_check(const struct device_node *dn, char *name, int index)
 {
 	if (!dn || dn != of_stdout || console_set_on_cmdline)
 		return false;
@@ -1986,7 +2002,7 @@ int of_find_last_cache_level(unsigned int cpu)
  *
  * Return: 0 on success or a standard error code on failure.
  */
-int of_map_id(struct device_node *np, u32 id,
+int of_map_id(const struct device_node *np, u32 id,
 	       const char *map_name, const char *map_mask_name,
 	       struct device_node **target, u32 *id_out)
 {

drivers/of/cpu.c

@@ -188,7 +188,7 @@ EXPORT_SYMBOL(of_cpu_node_to_id);
  * Return: An idle state node if found at @index. The refcount is incremented
  * for it, so call of_node_put() on it when done. Returns NULL if not found.
  */
-struct device_node *of_get_cpu_state_node(struct device_node *cpu_node,
+struct device_node *of_get_cpu_state_node(const struct device_node *cpu_node,
 					  int index)
 {
 	struct of_phandle_args args;

drivers/of/dynamic.c

@@ -536,7 +536,7 @@ static void __of_changeset_entry_destroy(struct of_changeset_entry *ce)
 	kfree(ce);
 }
 
-static void __of_changeset_entry_invert(struct of_changeset_entry *ce,
+static void __of_changeset_entry_invert(const struct of_changeset_entry *ce,
 					  struct of_changeset_entry *rce)
 {
 	memcpy(rce, ce, sizeof(*rce));
@@ -636,7 +636,7 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce)
 	return 0;
 }
 
-static inline int __of_changeset_entry_revert(struct of_changeset_entry *ce)
+static inline int __of_changeset_entry_revert(const struct of_changeset_entry *ce)
 {
 	struct of_changeset_entry ce_inverted;
 

drivers/of/fdt.c

@@ -457,6 +457,7 @@ int __initdata dt_root_addr_cells;
 int __initdata dt_root_size_cells;
 
 void *initial_boot_params __ro_after_init;
+phys_addr_t initial_boot_params_pa __ro_after_init;
 
 #ifdef CONFIG_OF_EARLY_FLATTREE
 
@@ -511,8 +512,6 @@ void __init early_init_fdt_scan_reserved_mem(void)
 			break;
 		memblock_reserve(base, size);
 	}
-
-	fdt_init_reserved_mem();
 }
 
 /**
@@ -938,12 +937,12 @@ int __init early_init_dt_scan_root(void)
 	dt_root_addr_cells = OF_ROOT_NODE_ADDR_CELLS_DEFAULT;
 
 	prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
-	if (prop)
+	if (!WARN(!prop, "No '#size-cells' in root node\n"))
 		dt_root_size_cells = be32_to_cpup(prop);
 	pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells);
 
 	prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
-	if (prop)
+	if (!WARN(!prop, "No '#address-cells' in root node\n"))
 		dt_root_addr_cells = be32_to_cpup(prop);
 	pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells);
 
@@ -1136,17 +1135,18 @@ static void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 	return ptr;
 }
 
-bool __init early_init_dt_verify(void *params)
+bool __init early_init_dt_verify(void *dt_virt, phys_addr_t dt_phys)
 {
-	if (!params)
+	if (!dt_virt)
 		return false;
 
 	/* check device tree validity */
-	if (fdt_check_header(params))
+	if (fdt_check_header(dt_virt))
 		return false;
 
 	/* Setup flat device-tree pointer */
-	initial_boot_params = params;
+	initial_boot_params = dt_virt;
+	initial_boot_params_pa = dt_phys;
 	of_fdt_crc32 = crc32_be(~0, initial_boot_params,
 				fdt_totalsize(initial_boot_params));
 
@@ -1173,11 +1173,11 @@ void __init early_init_dt_scan_nodes(void)
 	early_init_dt_check_for_usable_mem_range();
 }
 
-bool __init early_init_dt_scan(void *params)
+bool __init early_init_dt_scan(void *dt_virt, phys_addr_t dt_phys)
 {
 	bool status;
 
-	status = early_init_dt_verify(params);
+	status = early_init_dt_verify(dt_virt, dt_phys);
 	if (!status)
 		return false;
 
@@ -1212,6 +1212,9 @@ void __init unflatten_device_tree(void)
 {
 	void *fdt = initial_boot_params;
 
+	/* Save the statically-placed regions in the reserved_mem array */
+	fdt_scan_reserved_mem_reg_nodes();
+
 	/* Don't use the bootloader provided DTB if ACPI is enabled */
 	if (!acpi_disabled)
 		fdt = NULL;

drivers/of/fdt_address.c

@@ -55,7 +55,7 @@ static void __init fdt_bus_default_count_cells(const void *blob, int parentoffse
 		if (prop)
 			*addrc = be32_to_cpup(prop);
 		else
-			*addrc = dt_root_addr_cells;
+			*addrc = -1;
 	}
 
 	if (sizec) {
@@ -63,7 +63,7 @@ static void __init fdt_bus_default_count_cells(const void *blob, int parentoffse
 		if (prop)
 			*sizec = be32_to_cpup(prop);
 		else
-			*sizec = dt_root_size_cells;
+			*sizec = -1;
 	}
 }
 

drivers/of/irq.c

@@ -720,7 +720,7 @@ struct irq_domain *of_msi_map_get_device_domain(struct device *dev, u32 id,
  * Returns: the MSI domain for this device (or NULL on failure).
  */
 struct irq_domain *of_msi_get_domain(struct device *dev,
-				     struct device_node *np,
+				     const struct device_node *np,
 				     enum irq_domain_bus_token token)
 {
 	struct of_phandle_iterator it;
@@ -742,7 +742,7 @@ EXPORT_SYMBOL_GPL(of_msi_get_domain);
  * @dev: device structure to associate with an MSI irq domain
  * @np: device node for that device
  */
-void of_msi_configure(struct device *dev, struct device_node *np)
+void of_msi_configure(struct device *dev, const struct device_node *np)
 {
 	dev_set_msi_domain(dev,
 			   of_msi_get_domain(dev, np, DOMAIN_BUS_PLATFORM_MSI));

drivers/of/kexec.c

@@ -301,7 +301,7 @@ void *of_kexec_alloc_and_setup_fdt(const struct kimage *image,
 	}
 
 	/* Remove memory reservation for the current device tree. */
-	ret = fdt_find_and_del_mem_rsv(fdt, __pa(initial_boot_params),
+	ret = fdt_find_and_del_mem_rsv(fdt, initial_boot_params_pa,
 				       fdt_totalsize(initial_boot_params));
 	if (ret == -EINVAL) {
 		pr_err("Error removing memory reservation.\n");

drivers/of/kobj.c

@@ -37,7 +37,7 @@ static ssize_t of_node_property_read(struct file *filp, struct kobject *kobj,
 }
 
 /* always return newly allocated name, caller must free after use */
-static const char *safe_name(struct kobject *kobj, const char *orig_name)
+static const char *safe_name(const struct kobject *kobj, const char *orig_name)
 {
 	const char *name = orig_name;
 	struct kernfs_node *kn;
@@ -84,7 +84,7 @@ int __of_add_property_sysfs(struct device_node *np, struct property *pp)
 	return rc;
 }
 
-void __of_sysfs_remove_bin_file(struct device_node *np, struct property *prop)
+void __of_sysfs_remove_bin_file(struct device_node *np, const struct property *prop)
 {
 	if (!IS_ENABLED(CONFIG_SYSFS))
 		return;
@@ -93,7 +93,7 @@ void __of_sysfs_remove_bin_file(struct device_node *np, struct property *prop)
 	kfree(prop->attr.attr.name);
 }
 
-void __of_remove_property_sysfs(struct device_node *np, struct property *prop)
+void __of_remove_property_sysfs(struct device_node *np, const struct property *prop)
 {
 	/* at early boot, bail here and defer setup to of_init() */
 	if (of_kset && of_node_is_attached(np))
@@ -101,7 +101,7 @@ void __of_remove_property_sysfs(struct device_node *np, struct property *prop)
 }
 
 void __of_update_property_sysfs(struct device_node *np, struct property *newprop,
-		struct property *oldprop)
+		const struct property *oldprop)
 {
 	/* At early boot, bail out and defer setup to of_init() */
 	if (!of_kset)

drivers/of/module.c

@@ -35,12 +35,10 @@ ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len)
 	str += csize;
 
 	of_property_for_each_string(np, "compatible", p, compat) {
-		csize = strlen(compat) + 1;
+		csize = snprintf(str, len, "C%s", compat);
 		tsize += csize;
 		if (csize >= len)
 			continue;
-
-		csize = snprintf(str, len, "C%s", compat);
 		for (c = str; c; ) {
 			c = strchr(c, ' ');
 			if (c)

drivers/of/of_numa.c

@@ -14,9 +14,6 @@
 
 #include <asm/numa.h>
 
-/* define default numa node to 0 */
-#define DEFAULT_NODE 0
-
 /*
  * Even though we connect cpus to numa domains later in SMP
  * init, we need to know the node ids now for all cpus.

drivers/of/of_private.h

@@ -9,6 +9,7 @@
  */
 
 #define FDT_ALIGN_SIZE 8
+#define MAX_RESERVED_REGIONS    64
 
 /**
  * struct alias_prop - Alias property in 'aliases' node
@@ -72,9 +73,9 @@ static inline void of_platform_register_reconfig_notifier(void) { }
 #if defined(CONFIG_OF_KOBJ)
 int of_node_is_attached(const struct device_node *node);
 int __of_add_property_sysfs(struct device_node *np, struct property *pp);
-void __of_remove_property_sysfs(struct device_node *np, struct property *prop);
+void __of_remove_property_sysfs(struct device_node *np, const struct property *prop);
 void __of_update_property_sysfs(struct device_node *np, struct property *newprop,
-		struct property *oldprop);
+		const struct property *oldprop);
 int __of_attach_node_sysfs(struct device_node *np);
 void __of_detach_node_sysfs(struct device_node *np);
 #else
@@ -82,9 +83,9 @@ static inline int __of_add_property_sysfs(struct device_node *np, struct propert
 {
 	return 0;
 }
-static inline void __of_remove_property_sysfs(struct device_node *np, struct property *prop) {}
+static inline void __of_remove_property_sysfs(struct device_node *np, const struct property *prop) {}
 static inline void __of_update_property_sysfs(struct device_node *np,
-		struct property *newprop, struct property *oldprop) {}
+		struct property *newprop, const struct property *oldprop) {}
 static inline int __of_attach_node_sysfs(struct device_node *np)
 {
 	return 0;
@@ -130,7 +131,7 @@ void __of_prop_free(struct property *prop);
 struct device_node *__of_node_dup(const struct device_node *np,
 				  const char *full_name);
 
-struct device_node *__of_find_node_by_path(struct device_node *parent,
+struct device_node *__of_find_node_by_path(const struct device_node *parent,
 						const char *path);
 struct device_node *__of_find_node_by_full_path(struct device_node *node,
 						const char *path);
@@ -145,7 +146,7 @@ extern int __of_update_property(struct device_node *np,
 extern void __of_detach_node(struct device_node *np);
 
 extern void __of_sysfs_remove_bin_file(struct device_node *np,
-				       struct property *prop);
+				       const struct property *prop);
 
 /* illegal phandle value (set when unresolved) */
 #define OF_PHANDLE_ILLEGAL	0xdeadbeef
@@ -183,7 +184,7 @@ static inline struct device_node *__of_get_dma_parent(const struct device_node *
 #endif
 
 int fdt_scan_reserved_mem(void);
-void fdt_init_reserved_mem(void);
+void __init fdt_scan_reserved_mem_reg_nodes(void);
 
 bool of_fdt_device_is_available(const void *blob, unsigned long node);
 

drivers/of/of_reserved_mem.c

@@ -27,8 +27,9 @@
 
 #include "of_private.h"
 
-#define MAX_RESERVED_REGIONS	64
+static struct reserved_mem reserved_mem_array[MAX_RESERVED_REGIONS] __initdata;
-static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];
+static struct reserved_mem *reserved_mem __refdata = reserved_mem_array;
+static int total_reserved_mem_cnt = MAX_RESERVED_REGIONS;
 static int reserved_mem_count;
 
 static int __init early_init_dt_alloc_reserved_memory_arch(phys_addr_t size,
@@ -56,6 +57,51 @@ static int __init early_init_dt_alloc_reserved_memory_arch(phys_addr_t size,
 	return err;
 }
 
+/*
+ * alloc_reserved_mem_array() - allocate memory for the reserved_mem
+ * array using memblock
+ *
+ * This function is used to allocate memory for the reserved_mem
+ * array according to the total number of reserved memory regions
+ * defined in the DT.
+ * After the new array is allocated, the information stored in
+ * the initial static array is copied over to this new array and
+ * the new array is used from this point on.
+ */
+static void __init alloc_reserved_mem_array(void)
+{
+	struct reserved_mem *new_array;
+	size_t alloc_size, copy_size, memset_size;
+
+	alloc_size = array_size(total_reserved_mem_cnt, sizeof(*new_array));
+	if (alloc_size == SIZE_MAX) {
+		pr_err("Failed to allocate memory for reserved_mem array with err: %d", -EOVERFLOW);
+		return;
+	}
+
+	new_array = memblock_alloc(alloc_size, SMP_CACHE_BYTES);
+	if (!new_array) {
+		pr_err("Failed to allocate memory for reserved_mem array with err: %d", -ENOMEM);
+		return;
+	}
+
+	copy_size = array_size(reserved_mem_count, sizeof(*new_array));
+	if (copy_size == SIZE_MAX) {
+		memblock_free(new_array, alloc_size);
+		total_reserved_mem_cnt = MAX_RESERVED_REGIONS;
+		pr_err("Failed to allocate memory for reserved_mem array with err: %d", -EOVERFLOW);
+		return;
+	}
+
+	memset_size = alloc_size - copy_size;
+
+	memcpy(new_array, reserved_mem, copy_size);
+	memset(new_array + reserved_mem_count, 0, memset_size);
+
+	reserved_mem = new_array;
+}
+
+static void __init fdt_init_reserved_mem_node(struct reserved_mem *rmem);
 /*
  * fdt_reserved_mem_save_node() - save fdt node for second pass initialization
  */
@@ -64,7 +110,7 @@ static void __init fdt_reserved_mem_save_node(unsigned long node, const char *un
 {
 	struct reserved_mem *rmem = &reserved_mem[reserved_mem_count];
 
-	if (reserved_mem_count == ARRAY_SIZE(reserved_mem)) {
+	if (reserved_mem_count == total_reserved_mem_cnt) {
 		pr_err("not enough space for all defined regions.\n");
 		return;
 	}
@@ -74,6 +120,9 @@ static void __init fdt_reserved_mem_save_node(unsigned long node, const char *un
 	rmem->base = base;
 	rmem->size = size;
 
+	/* Call the region specific initialization function */
+	fdt_init_reserved_mem_node(rmem);
+
 	reserved_mem_count++;
 	return;
 }
@@ -106,7 +155,6 @@ static int __init __reserved_mem_reserve_reg(unsigned long node,
 	phys_addr_t base, size;
 	int len;
 	const __be32 *prop;
-	int first = 1;
 	bool nomap;
 
 	prop = of_get_flat_dt_prop(node, "reg", &len);
@@ -134,10 +182,6 @@ static int __init __reserved_mem_reserve_reg(unsigned long node,
 			       uname, &base, (unsigned long)(size / SZ_1M));
 
 		len -= t_len;
-		if (first) {
-			fdt_reserved_mem_save_node(node, uname, base, size);
-			first = 0;
-		}
 	}
 	return 0;
 }
@@ -165,12 +209,80 @@ static int __init __reserved_mem_check_root(unsigned long node)
 	return 0;
 }
 
+static void __init __rmem_check_for_overlap(void);
+
+/**
+ * fdt_scan_reserved_mem_reg_nodes() - Store info for the "reg" defined
+ * reserved memory regions.
+ *
+ * This function is used to scan through the DT and store the
+ * information for the reserved memory regions that are defined using
+ * the "reg" property. The region node number, name, base address, and
+ * size are all stored in the reserved_mem array by calling the
+ * fdt_reserved_mem_save_node() function.
+ */
+void __init fdt_scan_reserved_mem_reg_nodes(void)
+{
+	int t_len = (dt_root_addr_cells + dt_root_size_cells) * sizeof(__be32);
+	const void *fdt = initial_boot_params;
+	phys_addr_t base, size;
+	const __be32 *prop;
+	int node, child;
+	int len;
+
+	if (!fdt)
+		return;
+
+	node = fdt_path_offset(fdt, "/reserved-memory");
+	if (node < 0) {
+		pr_info("Reserved memory: No reserved-memory node in the DT\n");
+		return;
+	}
+
+	/* Attempt dynamic allocation of a new reserved_mem array */
+	alloc_reserved_mem_array();
+
+	if (__reserved_mem_check_root(node)) {
+		pr_err("Reserved memory: unsupported node format, ignoring\n");
+		return;
+	}
+
+	fdt_for_each_subnode(child, fdt, node) {
+		const char *uname;
+
+		prop = of_get_flat_dt_prop(child, "reg", &len);
+		if (!prop)
+			continue;
+		if (!of_fdt_device_is_available(fdt, child))
+			continue;
+
+		uname = fdt_get_name(fdt, child, NULL);
+		if (len && len % t_len != 0) {
+			pr_err("Reserved memory: invalid reg property in '%s', skipping node.\n",
+			       uname);
+			continue;
+		}
+		base = dt_mem_next_cell(dt_root_addr_cells, &prop);
+		size = dt_mem_next_cell(dt_root_size_cells, &prop);
+
+		if (size)
+			fdt_reserved_mem_save_node(child, uname, base, size);
+	}
+
+	/* check for overlapping reserved regions */
+	__rmem_check_for_overlap();
+}
+
+static int __init __reserved_mem_alloc_size(unsigned long node, const char *uname);
+
 /*
  * fdt_scan_reserved_mem() - scan a single FDT node for reserved memory
  */
 int __init fdt_scan_reserved_mem(void)
 {
 	int node, child;
+	int dynamic_nodes_cnt = 0, count = 0;
+	int dynamic_nodes[MAX_RESERVED_REGIONS];
 	const void *fdt = initial_boot_params;
 
 	node = fdt_path_offset(fdt, "/reserved-memory");
@@ -192,9 +304,31 @@ int __init fdt_scan_reserved_mem(void)
 		uname = fdt_get_name(fdt, child, NULL);
 
 		err = __reserved_mem_reserve_reg(child, uname);
-		if (err == -ENOENT && of_get_flat_dt_prop(child, "size", NULL))
+		if (!err)
-			fdt_reserved_mem_save_node(child, uname, 0, 0);
+			count++;
+		/*
+		 * Save the nodes for the dynamically-placed regions
+		 * into an array which will be used for allocation right
+		 * after all the statically-placed regions are reserved
+		 * or marked as no-map. This is done to avoid dynamically
+		 * allocating from one of the statically-placed regions.
+		 */
+		if (err == -ENOENT && of_get_flat_dt_prop(child, "size", NULL)) {
+			dynamic_nodes[dynamic_nodes_cnt] = child;
+			dynamic_nodes_cnt++;
+		}
 	}
+	for (int i = 0; i < dynamic_nodes_cnt; i++) {
+		const char *uname;
+		int err;
+
+		child = dynamic_nodes[i];
+		uname = fdt_get_name(fdt, child, NULL);
+		err = __reserved_mem_alloc_size(child, uname);
+		if (!err)
+			count++;
+	}
+	total_reserved_mem_cnt = count;
 	return 0;
 }
 
@@ -253,8 +387,7 @@ static int __init __reserved_mem_alloc_in_range(phys_addr_t size,
  * __reserved_mem_alloc_size() - allocate reserved memory described by
  *	'size', 'alignment'  and 'alloc-ranges' properties.
  */
-static int __init __reserved_mem_alloc_size(unsigned long node,
+static int __init __reserved_mem_alloc_size(unsigned long node, const char *uname)
-	const char *uname, phys_addr_t *res_base, phys_addr_t *res_size)
 {
 	int t_len = (dt_root_addr_cells + dt_root_size_cells) * sizeof(__be32);
 	phys_addr_t start = 0, end = 0;
@@ -334,9 +467,8 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
 		return -ENOMEM;
 	}
 
-	*res_base = base;
+	/* Save region in the reserved_mem array */
-	*res_size = size;
+	fdt_reserved_mem_save_node(node, uname, base, size);
-
 	return 0;
 }
 
@@ -425,48 +557,37 @@ static void __init __rmem_check_for_overlap(void)
 }
 
 /**
- * fdt_init_reserved_mem() - allocate and init all saved reserved memory regions
+ * fdt_init_reserved_mem_node() - Initialize a reserved memory region
+ * @rmem: reserved_mem struct of the memory region to be initialized.
+ *
+ * This function is used to call the region specific initialization
+ * function for a reserved memory region.
  */
-void __init fdt_init_reserved_mem(void)
+static void __init fdt_init_reserved_mem_node(struct reserved_mem *rmem)
 {
-	int i;
+	unsigned long node = rmem->fdt_node;
+	int err = 0;
+	bool nomap;
 
-	/* check for overlapping reserved regions */
+	nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL;
-	__rmem_check_for_overlap();
 
-	for (i = 0; i < reserved_mem_count; i++) {
+	err = __reserved_mem_init_node(rmem);
-		struct reserved_mem *rmem = &reserved_mem[i];
+	if (err != 0 && err != -ENOENT) {
-		unsigned long node = rmem->fdt_node;
+		pr_info("node %s compatible matching fail\n", rmem->name);
-		int err = 0;
+		if (nomap)
-		bool nomap;
+			memblock_clear_nomap(rmem->base, rmem->size);
+		else
+			memblock_phys_free(rmem->base, rmem->size);
+	} else {
+		phys_addr_t end = rmem->base + rmem->size - 1;
+		bool reusable =
+			(of_get_flat_dt_prop(node, "reusable", NULL)) != NULL;
 
-		nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL;
+		pr_info("%pa..%pa (%lu KiB) %s %s %s\n",
-
+			&rmem->base, &end, (unsigned long)(rmem->size / SZ_1K),
-		if (rmem->size == 0)
+			nomap ? "nomap" : "map",
-			err = __reserved_mem_alloc_size(node, rmem->name,
+			reusable ? "reusable" : "non-reusable",
-						 &rmem->base, &rmem->size);
+			rmem->name ? rmem->name : "unknown");
-		if (err == 0) {
-			err = __reserved_mem_init_node(rmem);
-			if (err != 0 && err != -ENOENT) {
-				pr_info("node %s compatible matching fail\n",
-					rmem->name);
-				if (nomap)
-					memblock_clear_nomap(rmem->base, rmem->size);
-				else
-					memblock_phys_free(rmem->base,
-							   rmem->size);
-			} else {
-				phys_addr_t end = rmem->base + rmem->size - 1;
-				bool reusable =
-					(of_get_flat_dt_prop(node, "reusable", NULL)) != NULL;
-
-				pr_info("%pa..%pa (%lu KiB) %s %s %s\n",
-					&rmem->base, &end, (unsigned long)(rmem->size / SZ_1K),
-					nomap ? "nomap" : "map",
-					reusable ? "reusable" : "non-reusable",
-					rmem->name ? rmem->name : "unknown");
-			}
-		}
 	}
 }
 

drivers/of/overlay.c

@@ -296,10 +296,11 @@ static struct property *dup_and_fixup_symbol_prop(
  * invalid @overlay.
  */
 static int add_changeset_property(struct overlay_changeset *ovcs,
-		struct target *target, struct property *overlay_prop,
+		struct target *target, const struct property *overlay_prop,
 		bool is_symbols_prop)
 {
-	struct property *new_prop = NULL, *prop;
+	struct property *new_prop = NULL;
+	const struct property *prop;
 	int ret = 0;
 
 	if (target->in_livetree)
@@ -398,7 +399,7 @@ static int add_changeset_property(struct overlay_changeset *ovcs,
  * invalid @overlay.
  */
 static int add_changeset_node(struct overlay_changeset *ovcs,
-		struct target *target, struct device_node *node)
+		struct target *target, const struct device_node *node)
 {
 	const char *node_kbasename;
 	const __be32 *phandle;
@@ -675,8 +676,8 @@ static int build_changeset(struct overlay_changeset *ovcs)
  * 1) "target" property containing the phandle of the target
  * 2) "target-path" property containing the path of the target
  */
-static struct device_node *find_target(struct device_node *info_node,
+static struct device_node *find_target(const struct device_node *info_node,
-				       struct device_node *target_base)
+				       const struct device_node *target_base)
 {
 	struct device_node *node;
 	char *target_path;
@@ -735,7 +736,7 @@ static struct device_node *find_target(struct device_node *info_node,
  * init_overlay_changeset() must call free_overlay_changeset().
  */
 static int init_overlay_changeset(struct overlay_changeset *ovcs,
-				  struct device_node *target_base)
+				  const struct device_node *target_base)
 {
 	struct device_node *node, *overlay_node;
 	struct fragment *fragment;
@@ -910,7 +911,7 @@ static void free_overlay_changeset(struct overlay_changeset *ovcs)
  */
 
 static int of_overlay_apply(struct overlay_changeset *ovcs,
-			    struct device_node *base)
+			    const struct device_node *base)
 {
 	int ret = 0, ret_revert, ret_tmp;
 
@@ -978,7 +979,7 @@ static int of_overlay_apply(struct overlay_changeset *ovcs,
  */
 
 int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size,
-			 int *ret_ovcs_id, struct device_node *base)
+			 int *ret_ovcs_id, const struct device_node *base)
 {
 	void *new_fdt;
 	void *new_fdt_align;
@@ -1074,7 +1075,7 @@ EXPORT_SYMBOL_GPL(of_overlay_fdt_apply);
  *
  * Returns 1 if @np is @tree or is contained in @tree, else 0
  */
-static int find_node(struct device_node *tree, struct device_node *np)
+static int find_node(const struct device_node *tree, struct device_node *np)
 {
 	if (tree == np)
 		return 1;

drivers/of/overlay_test.c

@@ -65,6 +65,8 @@ static void of_overlay_apply_kunit_cleanup(struct kunit *test)
 	struct device_node *np;
 
 	of_root_kunit_skip(test);
+	if (!IS_ENABLED(CONFIG_OF_OVERLAY))
+		kunit_skip(test, "requires CONFIG_OF_OVERLAY to apply overlay");
 	if (!IS_ENABLED(CONFIG_OF_EARLY_FLATTREE))
 		kunit_skip(test, "requires CONFIG_OF_EARLY_FLATTREE for root node");
 

drivers/of/property.c

@@ -68,7 +68,7 @@ EXPORT_SYMBOL(of_graph_is_present);
 int of_property_count_elems_of_size(const struct device_node *np,
 				const char *propname, int elem_size)
 {
-	struct property *prop = of_find_property(np, propname, NULL);
+	const struct property *prop = of_find_property(np, propname, NULL);
 
 	if (!prop)
 		return -EINVAL;
@@ -104,7 +104,7 @@ EXPORT_SYMBOL_GPL(of_property_count_elems_of_size);
 static void *of_find_property_value_of_size(const struct device_node *np,
 			const char *propname, u32 min, u32 max, size_t *len)
 {
-	struct property *prop = of_find_property(np, propname, NULL);
+	const struct property *prop = of_find_property(np, propname, NULL);
 
 	if (!prop)
 		return ERR_PTR(-EINVAL);
@@ -530,7 +530,7 @@ int of_property_read_string_helper(const struct device_node *np,
 }
 EXPORT_SYMBOL_GPL(of_property_read_string_helper);
 
-const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur,
+const __be32 *of_prop_next_u32(const struct property *prop, const __be32 *cur,
 			       u32 *pu)
 {
 	const void *curv = cur;
@@ -553,7 +553,7 @@ const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur,
 }
 EXPORT_SYMBOL_GPL(of_prop_next_u32);
 
-const char *of_prop_next_string(struct property *prop, const char *cur)
+const char *of_prop_next_string(const struct property *prop, const char *cur)
 {
 	const void *curv = cur;
 
@@ -630,6 +630,70 @@ struct device_node *of_graph_get_port_by_id(struct device_node *parent, u32 id)
 }
 EXPORT_SYMBOL(of_graph_get_port_by_id);
 
+/**
+ * of_graph_get_next_port() - get next port node.
+ * @parent: pointer to the parent device node, or parent ports node
+ * @prev: previous port node, or NULL to get first
+ *
+ * Parent device node can be used as @parent whether device node has ports node
+ * or not. It will work same as ports@0 node.
+ *
+ * Return: A 'port' node pointer with refcount incremented. Refcount
+ * of the passed @prev node is decremented.
+ */
+struct device_node *of_graph_get_next_port(const struct device_node *parent,
+					   struct device_node *prev)
+{
+	if (!parent)
+		return NULL;
+
+	if (!prev) {
+		struct device_node *node __free(device_node) =
+			of_get_child_by_name(parent, "ports");
+
+		if (node)
+			parent = node;
+
+		return of_get_child_by_name(parent, "port");
+	}
+
+	do {
+		prev = of_get_next_child(parent, prev);
+		if (!prev)
+			break;
+	} while (!of_node_name_eq(prev, "port"));
+
+	return prev;
+}
+EXPORT_SYMBOL(of_graph_get_next_port);
+
+/**
+ * of_graph_get_next_port_endpoint() - get next endpoint node in port.
+ * If it reached to end of the port, it will return NULL.
+ * @port: pointer to the target port node
+ * @prev: previous endpoint node, or NULL to get first
+ *
+ * Return: An 'endpoint' node pointer with refcount incremented. Refcount
+ * of the passed @prev node is decremented.
+ */
+struct device_node *of_graph_get_next_port_endpoint(const struct device_node *port,
+						    struct device_node *prev)
+{
+	while (1) {
+		prev = of_get_next_child(port, prev);
+		if (!prev)
+			break;
+		if (WARN(!of_node_name_eq(prev, "endpoint"),
+			 "non endpoint node is used (%pOF)", prev))
+			continue;
+
+		break;
+	}
+
+	return prev;
+}
+EXPORT_SYMBOL(of_graph_get_next_port_endpoint);
+
 /**
  * of_graph_get_next_endpoint() - get next endpoint node
  * @parent: pointer to the parent device node
@@ -653,13 +717,7 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
 	 * parent port node.
 	 */
 	if (!prev) {
-		struct device_node *node __free(device_node) =
+		port = of_graph_get_next_port(parent, NULL);
-			of_get_child_by_name(parent, "ports");
-
-		if (node)
-			parent = node;
-
-		port = of_get_child_by_name(parent, "port");
 		if (!port) {
 			pr_debug("graph: no port node found in %pOF\n", parent);
 			return NULL;
@@ -677,7 +735,7 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
 		 * getting the next child. If the previous endpoint is NULL this
 		 * will return the first child.
 		 */
-		endpoint = of_get_next_child(port, prev);
+		endpoint = of_graph_get_next_port_endpoint(port, prev);
 		if (endpoint) {
 			of_node_put(port);
 			return endpoint;
@@ -686,11 +744,9 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
 		/* No more endpoints under this port, try the next one. */
 		prev = NULL;
 
-		do {
+		port = of_graph_get_next_port(parent, port);
-			port = of_get_next_child(parent, port);
+		if (!port)
-			if (!port)
+			return NULL;
-				return NULL;
-		} while (!of_node_name_eq(port, "port"));
 	}
 }
 EXPORT_SYMBOL(of_graph_get_next_endpoint);
@@ -823,6 +879,23 @@ unsigned int of_graph_get_endpoint_count(const struct device_node *np)
 }
 EXPORT_SYMBOL(of_graph_get_endpoint_count);
 
+/**
+ * of_graph_get_port_count() - get the number of port in a device or ports node
+ * @np: pointer to the device or ports node
+ *
+ * Return: count of port of this device or ports node
+ */
+unsigned int of_graph_get_port_count(struct device_node *np)
+{
+	unsigned int num = 0;
+
+	for_each_of_graph_port(np, port)
+		num++;
+
+	return num;
+}
+EXPORT_SYMBOL(of_graph_get_port_count);
+
 /**
  * of_graph_get_remote_node() - get remote parent device_node for given port/endpoint
  * @node: pointer to parent device_node containing graph port/endpoint
@@ -1466,7 +1539,7 @@ static int of_fwnode_irq_get(const struct fwnode_handle *fwnode,
 
 static int of_fwnode_add_links(struct fwnode_handle *fwnode)
 {
-	struct property *p;
+	const struct property *p;
 	struct device_node *con_np = to_of_node(fwnode);
 
 	if (IS_ENABLED(CONFIG_X86))

drivers/of/resolver.c

@@ -42,7 +42,7 @@ static void adjust_overlay_phandles(struct device_node *overlay,
 		int phandle_delta)
 {
 	struct device_node *child;
-	struct property *prop;
+	const struct property *prop;
 	phandle phandle;
 
 	/* adjust node's phandle in node */
@@ -71,10 +71,10 @@ static void adjust_overlay_phandles(struct device_node *overlay,
 }
 
 static int update_usages_of_a_phandle_reference(struct device_node *overlay,
-		struct property *prop_fixup, phandle phandle)
+		const struct property *prop_fixup, phandle phandle)
 {
 	struct device_node *refnode;
-	struct property *prop;
+	const struct property *prop;
 	char *value __free(kfree) = kmemdup(prop_fixup->value, prop_fixup->length, GFP_KERNEL);
 	char *cur, *end, *node_path, *prop_name, *s;
 	int offset, len;
@@ -147,11 +147,11 @@ static int node_name_cmp(const struct device_node *dn1,
  * of offsets of the phandle reference(s) within the respective property
  * value(s).  The values at these offsets will be fixed up.
  */
-static int adjust_local_phandle_references(struct device_node *local_fixups,
+static int adjust_local_phandle_references(const struct device_node *local_fixups,
-		struct device_node *overlay, int phandle_delta)
+		const struct device_node *overlay, int phandle_delta)
 {
 	struct device_node *overlay_child;
-	struct property *prop_fix, *prop;
+	const struct property *prop_fix, *prop;
 	int err, i, count;
 	unsigned int off;
 

drivers/pci/pci.c

@@ -4167,7 +4167,7 @@ EXPORT_SYMBOL(pci_request_regions_exclusive);
  * Record the PCI IO range (expressed as CPU physical address + size).
  * Return a negative value if an error has occurred, zero otherwise
  */
-int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr,
+int pci_register_io_range(const struct fwnode_handle *fwnode, phys_addr_t addr,
 			resource_size_t	size)
 {
 	int ret = 0;

drivers/video/fbdev/omap2/omapfb/dss/dpi.c

@@ -20,6 +20,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/string.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/clk.h>
 #include <linux/component.h>
 
@@ -845,7 +846,7 @@ int dpi_init_port(struct platform_device *pdev, struct device_node *port)
 	if (!dpi)
 		return -ENOMEM;
 
-	ep = omapdss_of_get_next_endpoint(port, NULL);
+	ep = of_graph_get_next_port_endpoint(port, NULL);
 	if (!ep)
 		return 0;
 

drivers/video/fbdev/omap2/omapfb/dss/dss-of.c

@@ -15,72 +15,6 @@
 
 #include "dss.h"
 
-struct device_node *
-omapdss_of_get_next_port(const struct device_node *parent,
-			 struct device_node *prev)
-{
-	struct device_node *port = NULL;
-
-	if (!parent)
-		return NULL;
-
-	if (!prev) {
-		struct device_node *ports;
-		/*
-		 * It's the first call, we have to find a port subnode
-		 * within this node or within an optional 'ports' node.
-		 */
-		ports = of_get_child_by_name(parent, "ports");
-		if (ports)
-			parent = ports;
-
-		port = of_get_child_by_name(parent, "port");
-
-		/* release the 'ports' node */
-		of_node_put(ports);
-	} else {
-		struct device_node *ports;
-
-		ports = of_get_parent(prev);
-		if (!ports)
-			return NULL;
-
-		do {
-			port = of_get_next_child(ports, prev);
-			if (!port) {
-				of_node_put(ports);
-				return NULL;
-			}
-			prev = port;
-		} while (!of_node_name_eq(port, "port"));
-
-		of_node_put(ports);
-	}
-
-	return port;
-}
-EXPORT_SYMBOL_GPL(omapdss_of_get_next_port);
-
-struct device_node *
-omapdss_of_get_next_endpoint(const struct device_node *parent,
-			     struct device_node *prev)
-{
-	struct device_node *ep = NULL;
-
-	if (!parent)
-		return NULL;
-
-	do {
-		ep = of_get_next_child(parent, prev);
-		if (!ep)
-			return NULL;
-		prev = ep;
-	} while (!of_node_name_eq(ep, "endpoint"));
-
-	return ep;
-}
-EXPORT_SYMBOL_GPL(omapdss_of_get_next_endpoint);
-
 struct device_node *dss_of_port_get_parent_device(struct device_node *port)
 {
 	struct device_node *np;

drivers/video/fbdev/omap2/omapfb/dss/dss.c

@@ -26,6 +26,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/regulator/consumer.h>
 #include <linux/suspend.h>
 #include <linux/component.h>
@@ -919,10 +920,7 @@ static int dss_init_ports(struct platform_device *pdev)
 	struct device_node *port;
 	int r, ret = 0;
 
-	if (parent == NULL)
+	port = of_graph_get_next_port(parent, NULL);
-		return 0;
-
-	port = omapdss_of_get_next_port(parent, NULL);
 	if (!port)
 		return 0;
 
@@ -952,8 +950,9 @@ static int dss_init_ports(struct platform_device *pdev)
 		default:
 			break;
 		}
-	} while (!ret &&
+
-		 (port = omapdss_of_get_next_port(parent, port)) != NULL);
+		port = of_graph_get_next_port(parent, port);
+	} while (!ret && port);
 
 	if (ret)
 		dss_uninit_ports(pdev);
@@ -966,10 +965,7 @@ static void dss_uninit_ports(struct platform_device *pdev)
 	struct device_node *parent = pdev->dev.of_node;
 	struct device_node *port;
 
-	if (parent == NULL)
+	port = of_graph_get_next_port(parent, NULL);
-		return;
-
-	port = omapdss_of_get_next_port(parent, NULL);
 	if (!port)
 		return;
 
@@ -1000,7 +996,9 @@ static void dss_uninit_ports(struct platform_device *pdev)
 		default:
 			break;
 		}
-	} while ((port = omapdss_of_get_next_port(parent, port)) != NULL);
+
+		port = of_graph_get_next_port(parent, port);
+	} while (port);
 }
 
 static int dss_video_pll_probe(struct platform_device *pdev)

drivers/video/fbdev/omap2/omapfb/dss/sdi.c

@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/string.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/component.h>
 
 #include <video/omapfb_dss.h>
@@ -405,7 +406,7 @@ int sdi_init_port(struct platform_device *pdev, struct device_node *port)
 	u32 datapairs;
 	int r;
 
-	ep = omapdss_of_get_next_endpoint(port, NULL);
+	ep = of_graph_get_next_port_endpoint(port, NULL);
 	if (!ep)
 		return 0;
 

include/linux/logic_pio.h

@@ -17,7 +17,7 @@ enum {
 
 struct logic_pio_hwaddr {
 	struct list_head list;
-	struct fwnode_handle *fwnode;
+	const struct fwnode_handle *fwnode;
 	resource_size_t hw_start;
 	resource_size_t io_start;
 	resource_size_t size; /* range size populated */
@@ -110,8 +110,8 @@ void logic_outsl(unsigned long addr, const void *buffer, unsigned int count);
 #endif /* CONFIG_INDIRECT_PIO */
 #define MMIO_UPPER_LIMIT (IO_SPACE_LIMIT - PIO_INDIRECT_SIZE)
 
-struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode);
+struct logic_pio_hwaddr *find_io_range_by_fwnode(const struct fwnode_handle *fwnode);
-unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode,
+unsigned long logic_pio_trans_hwaddr(const struct fwnode_handle *fwnode,
 			resource_size_t hw_addr, resource_size_t size);
 int logic_pio_register_range(struct logic_pio_hwaddr *newrange);
 void logic_pio_unregister_range(struct logic_pio_hwaddr *range);

include/linux/of.h

@@ -357,7 +357,7 @@ extern struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
 extern struct device_node *of_cpu_device_node_get(int cpu);
 extern int of_cpu_node_to_id(struct device_node *np);
 extern struct device_node *of_get_next_cpu_node(struct device_node *prev);
-extern struct device_node *of_get_cpu_state_node(struct device_node *cpu_node,
+extern struct device_node *of_get_cpu_state_node(const struct device_node *cpu_node,
 						 int index);
 extern u64 of_get_cpu_hwid(struct device_node *cpun, unsigned int thread);
 
@@ -395,7 +395,7 @@ extern int of_phandle_iterator_args(struct of_phandle_iterator *it,
 				    int size);
 
 extern void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align));
-extern int of_alias_get_id(struct device_node *np, const char *stem);
+extern int of_alias_get_id(const struct device_node *np, const char *stem);
 extern int of_alias_get_highest_id(const char *stem);
 
 bool of_machine_compatible_match(const char *const *compats);
@@ -435,7 +435,7 @@ extern int of_detach_node(struct device_node *);
  * of_property_for_each_u32(np, "propname", u)
  *         printk("U32 value: %x\n", u);
  */
-const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur,
+const __be32 *of_prop_next_u32(const struct property *prop, const __be32 *cur,
 			       u32 *pu);
 /*
  * struct property *prop;
@@ -444,11 +444,11 @@ const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur,
  * of_property_for_each_string(np, "propname", prop, s)
  *         printk("String value: %s\n", s);
  */
-const char *of_prop_next_string(struct property *prop, const char *cur);
+const char *of_prop_next_string(const struct property *prop, const char *cur);
 
-bool of_console_check(struct device_node *dn, char *name, int index);
+bool of_console_check(const struct device_node *dn, char *name, int index);
 
-int of_map_id(struct device_node *np, u32 id,
+int of_map_id(const struct device_node *np, u32 id,
 	       const char *map_name, const char *map_mask_name,
 	       struct device_node **target, u32 *id_out);
 
@@ -826,13 +826,13 @@ static inline bool of_console_check(const struct device_node *dn, const char *na
 	return false;
 }
 
-static inline const __be32 *of_prop_next_u32(struct property *prop,
+static inline const __be32 *of_prop_next_u32(const struct property *prop,
 		const __be32 *cur, u32 *pu)
 {
 	return NULL;
 }
 
-static inline const char *of_prop_next_string(struct property *prop,
+static inline const char *of_prop_next_string(const struct property *prop,
 		const char *cur)
 {
 	return NULL;
@@ -871,7 +871,7 @@ static inline void of_property_clear_flag(struct property *p, unsigned long flag
 {
 }
 
-static inline int of_map_id(struct device_node *np, u32 id,
+static inline int of_map_id(const struct device_node *np, u32 id,
 			     const char *map_name, const char *map_mask_name,
 			     struct device_node **target, u32 *id_out)
 {
@@ -899,7 +899,7 @@ static inline const void *of_device_get_match_data(const struct device *dev)
 #define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
 #endif
 
-static inline int of_prop_val_eq(struct property *p1, struct property *p2)
+static inline int of_prop_val_eq(const struct property *p1, const struct property *p2)
 {
 	return p1->length == p2->length &&
 	       !memcmp(p1->value, p2->value, (size_t)p1->length);
@@ -1252,7 +1252,7 @@ static inline int of_property_read_string_index(const struct device_node *np,
 static inline bool of_property_read_bool(const struct device_node *np,
 					 const char *propname)
 {
-	struct property *prop = of_find_property(np, propname, NULL);
+	const struct property *prop = of_find_property(np, propname, NULL);
 
 	return prop ? true : false;
 }
@@ -1430,7 +1430,7 @@ static inline int of_property_read_s32(const struct device_node *np,
 	     err = of_phandle_iterator_next(it))
 
 #define of_property_for_each_u32(np, propname, u)			\
-	for (struct {struct property *prop; const __be32 *item; } _it =	\
+	for (struct {const struct property *prop; const __be32 *item; } _it =	\
 		{of_find_property(np, propname, NULL),			\
 		 of_prop_next_u32(_it.prop, NULL, &u)};			\
 	     _it.item;							\
@@ -1734,7 +1734,7 @@ struct of_overlay_notify_data {
 #ifdef CONFIG_OF_OVERLAY
 
 int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size,
-			 int *ovcs_id, struct device_node *target_base);
+			 int *ovcs_id, const struct device_node *target_base);
 int of_overlay_remove(int *ovcs_id);
 int of_overlay_remove_all(void);
 
@@ -1744,7 +1744,7 @@ int of_overlay_notifier_unregister(struct notifier_block *nb);
 #else
 
 static inline int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size,
-				       int *ovcs_id, struct device_node *target_base)
+				       int *ovcs_id, const struct device_node *target_base)
 {
 	return -ENOTSUPP;
 }

include/linux/of_address.h

@@ -10,7 +10,7 @@ struct of_bus;
 
 struct of_pci_range_parser {
 	struct device_node *node;
-	struct of_bus *bus;
+	const struct of_bus *bus;
 	const __be32 *range;
 	const __be32 *end;
 	int na;
@@ -83,8 +83,8 @@ extern struct of_pci_range *of_pci_range_parser_one(
 					struct of_pci_range *range);
 extern int of_pci_address_to_resource(struct device_node *dev, int bar,
 				      struct resource *r);
-extern int of_pci_range_to_resource(struct of_pci_range *range,
+extern int of_pci_range_to_resource(const struct of_pci_range *range,
-				    struct device_node *np,
+				    const struct device_node *np,
 				    struct resource *res);
 extern int of_range_to_resource(struct device_node *np, int index,
 				struct resource *res);

include/linux/of_fdt.h

@@ -31,6 +31,7 @@ extern void *of_fdt_unflatten_tree(const unsigned long *blob,
 extern int __initdata dt_root_addr_cells;
 extern int __initdata dt_root_size_cells;
 extern void *initial_boot_params;
+extern phys_addr_t initial_boot_params_pa;
 
 extern char __dtb_start[];
 extern char __dtb_end[];
@@ -70,8 +71,8 @@ extern u64 dt_mem_next_cell(int s, const __be32 **cellp);
 /* Early flat tree scan hooks */
 extern int early_init_dt_scan_root(void);
 
-extern bool early_init_dt_scan(void *params);
+extern bool early_init_dt_scan(void *dt_virt, phys_addr_t dt_phys);
-extern bool early_init_dt_verify(void *params);
+extern bool early_init_dt_verify(void *dt_virt, phys_addr_t dt_phys);
 extern void early_init_dt_scan_nodes(void);
 
 extern const char *of_flat_dt_get_machine_name(void);

include/linux/of_graph.h

@@ -11,6 +11,7 @@
 #ifndef __LINUX_OF_GRAPH_H
 #define __LINUX_OF_GRAPH_H
 
+#include <linux/cleanup.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 
@@ -37,14 +38,43 @@ struct of_endpoint {
 	for (child = of_graph_get_next_endpoint(parent, NULL); child != NULL; \
 	     child = of_graph_get_next_endpoint(parent, child))
 
+/**
+ * for_each_of_graph_port - iterate over every port in a device or ports node
+ * @parent: parent device or ports node containing port
+ * @child: loop variable pointing to the current port node
+ *
+ * When breaking out of the loop, and continue to use the @child, you need to
+ * use return_ptr(@child) or no_free_ptr(@child) not to call __free() for it.
+ */
+#define for_each_of_graph_port(parent, child)			\
+	for (struct device_node *child __free(device_node) = of_graph_get_next_port(parent, NULL);\
+	     child != NULL; child = of_graph_get_next_port(parent, child))
+
+/**
+ * for_each_of_graph_port_endpoint - iterate over every endpoint in a port node
+ * @parent: parent port node
+ * @child: loop variable pointing to the current endpoint node
+ *
+ * When breaking out of the loop, and continue to use the @child, you need to
+ * use return_ptr(@child) or no_free_ptr(@child) not to call __free() for it.
+ */
+#define for_each_of_graph_port_endpoint(parent, child)			\
+	for (struct device_node *child __free(device_node) = of_graph_get_next_port_endpoint(parent, NULL);\
+	     child != NULL; child = of_graph_get_next_port_endpoint(parent, child))
+
 #ifdef CONFIG_OF
 bool of_graph_is_present(const struct device_node *node);
 int of_graph_parse_endpoint(const struct device_node *node,
 				struct of_endpoint *endpoint);
 unsigned int of_graph_get_endpoint_count(const struct device_node *np);
+unsigned int of_graph_get_port_count(struct device_node *np);
 struct device_node *of_graph_get_port_by_id(struct device_node *node, u32 id);
 struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
 					struct device_node *previous);
+struct device_node *of_graph_get_next_port(const struct device_node *parent,
+					   struct device_node *port);
+struct device_node *of_graph_get_next_port_endpoint(const struct device_node *port,
+						    struct device_node *prev);
 struct device_node *of_graph_get_endpoint_by_regs(
 		const struct device_node *parent, int port_reg, int reg);
 struct device_node *of_graph_get_remote_endpoint(
@@ -73,6 +103,11 @@ static inline unsigned int of_graph_get_endpoint_count(const struct device_node
 	return 0;
 }
 
+static inline unsigned int of_graph_get_port_count(struct device_node *np)
+{
+	return 0;
+}
+
 static inline struct device_node *of_graph_get_port_by_id(
 					struct device_node *node, u32 id)
 {
@@ -86,6 +121,20 @@ static inline struct device_node *of_graph_get_next_endpoint(
 	return NULL;
 }
 
+static inline struct device_node *of_graph_get_next_port(
+					const struct device_node *parent,
+					struct device_node *previous)
+{
+	return NULL;
+}
+
+static inline struct device_node *of_graph_get_next_port_endpoint(
+					const struct device_node *parent,
+					struct device_node *previous)
+{
+	return NULL;
+}
+
 static inline struct device_node *of_graph_get_endpoint_by_regs(
 		const struct device_node *parent, int port_reg, int reg)
 {

include/linux/of_irq.h

@@ -48,12 +48,12 @@ extern int of_irq_to_resource_table(struct device_node *dev,
 		struct resource *res, int nr_irqs);
 extern struct device_node *of_irq_find_parent(struct device_node *child);
 extern struct irq_domain *of_msi_get_domain(struct device *dev,
-					    struct device_node *np,
+					    const struct device_node *np,
 					    enum irq_domain_bus_token token);
 extern struct irq_domain *of_msi_map_get_device_domain(struct device *dev,
 							u32 id,
 							u32 bus_token);
-extern void of_msi_configure(struct device *dev, struct device_node *np);
+extern void of_msi_configure(struct device *dev, const struct device_node *np);
 u32 of_msi_map_id(struct device *dev, struct device_node *msi_np, u32 id_in);
 #else
 static inline void of_irq_init(const struct of_device_id *matches)

include/linux/pci.h

@@ -1556,7 +1556,7 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
 			void *alignf_data);
 
 
-int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr,
+int pci_register_io_range(const struct fwnode_handle *fwnode, phys_addr_t addr,
 			resource_size_t size);
 unsigned long pci_address_to_pio(phys_addr_t addr);
 phys_addr_t pci_pio_to_address(unsigned long pio);
@@ -2019,7 +2019,7 @@ static inline int pci_request_regions(struct pci_dev *dev, const char *res_name)
 { return -EIO; }
 static inline void pci_release_regions(struct pci_dev *dev) { }
 
-static inline int pci_register_io_range(struct fwnode_handle *fwnode,
+static inline int pci_register_io_range(const struct fwnode_handle *fwnode,
 					phys_addr_t addr, resource_size_t size)
 { return -EINVAL; }
 

include/video/omapfb_dss.h

@@ -811,14 +811,6 @@ static inline bool omapdss_device_is_enabled(struct omap_dss_device *dssdev)
 	return dssdev->state == OMAP_DSS_DISPLAY_ACTIVE;
 }
 
-struct device_node *
-omapdss_of_get_next_port(const struct device_node *parent,
-			 struct device_node *prev);
-
-struct device_node *
-omapdss_of_get_next_endpoint(const struct device_node *parent,
-			     struct device_node *prev);
-
 struct omap_dss_device *
 omapdss_of_find_source_for_first_ep(struct device_node *node);
 #else

lib/logic_pio.c

@@ -122,7 +122,7 @@ void logic_pio_unregister_range(struct logic_pio_hwaddr *range)
  *
  * Traverse the io_range_list to find the registered node for @fwnode.
  */
-struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode)
+struct logic_pio_hwaddr *find_io_range_by_fwnode(const struct fwnode_handle *fwnode)
 {
 	struct logic_pio_hwaddr *range, *found_range = NULL;
 
@@ -186,7 +186,7 @@ resource_size_t logic_pio_to_hwaddr(unsigned long pio)
  *
  * Returns Logical PIO value if successful, ~0UL otherwise
  */
-unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode,
+unsigned long logic_pio_trans_hwaddr(const struct fwnode_handle *fwnode,
 				     resource_size_t addr, resource_size_t size)
 {
 	struct logic_pio_hwaddr *range;

sound/soc/generic/audio-graph-card.c

@@ -372,7 +372,7 @@ static int __graph_for_each_link(struct simple_util_priv *priv,
 		cpu_port = it.node;
 
 		/* loop for all CPU endpoint */
-		for_each_child_of_node_scoped(cpu_port, cpu_ep) {
+		for_each_of_graph_port_endpoint(cpu_port, cpu_ep) {
 			/* get codec */
 			codec_ep = of_graph_get_remote_endpoint(cpu_ep);
 			codec_port = ep_to_port(codec_ep);

sound/soc/generic/audio-graph-card2.c

@@ -234,8 +234,6 @@ enum graph_type {
 #define GRAPH_NODENAME_DPCM	"dpcm"
 #define GRAPH_NODENAME_C2C	"codec2codec"
 
-#define port_to_endpoint(port) of_get_child_by_name(port, "endpoint")
-
 #define ep_to_port(ep)	of_get_parent(ep)
 static struct device_node *port_to_ports(struct device_node *port)
 {
@@ -354,14 +352,9 @@ static struct device_node *graph_get_next_multi_ep(struct device_node **port)
 	 *	port@1 { rep1 };
 	 * };
 	 */
-	do {
+	*port = of_graph_get_next_port(ports, *port);
-		*port = of_get_next_child(ports, *port);
-		if (!*port)
-			break;
-	} while (!of_node_name_eq(*port, "port"));
-
 	if (*port) {
-		ep  = port_to_endpoint(*port);
+		ep  = of_graph_get_next_port_endpoint(*port, NULL);
 		rep = of_graph_get_remote_endpoint(ep);
 	}
 
@@ -533,67 +526,66 @@ static int graph_parse_node_multi_nm(struct snd_soc_dai_link *dai_link,
 	 *	};
 	 * };
 	 */
-	struct device_node *mcpu_ep		= port_to_endpoint(mcpu_port);
+	struct device_node *mcpu_ep		= of_graph_get_next_port_endpoint(mcpu_port, NULL);
-	struct device_node *mcpu_ep_n		= mcpu_ep;
+	struct device_node *mcpu_ports		= port_to_ports(mcpu_port);
-	struct device_node *mcpu_port_top	= of_get_next_child(port_to_ports(mcpu_port), NULL);
+	struct device_node *mcpu_port_top	= of_graph_get_next_port(mcpu_ports, NULL);
-	struct device_node *mcpu_ep_top		= port_to_endpoint(mcpu_port_top);
+	struct device_node *mcpu_ep_top		= of_graph_get_next_port_endpoint(mcpu_port_top, NULL);
 	struct device_node *mcodec_ep_top	= of_graph_get_remote_endpoint(mcpu_ep_top);
 	struct device_node *mcodec_port_top	= ep_to_port(mcodec_ep_top);
 	struct device_node *mcodec_ports	= port_to_ports(mcodec_port_top);
 	int nm_max = max(dai_link->num_cpus, dai_link->num_codecs);
-	int ret = -EINVAL;
+	int ret = 0;
 
-	if (cpu_idx > dai_link->num_cpus)
+	if (cpu_idx > dai_link->num_cpus) {
+		ret = -EINVAL;
 		goto mcpu_err;
+	}
 
-	while (1) {
+	for_each_of_graph_port_endpoint(mcpu_port, mcpu_ep_n) {
 		struct device_node *mcodec_ep_n;
-		struct device_node *mcodec_port_i;
 		struct device_node *mcodec_port;
 		int codec_idx;
 
+		/* ignore 1st ep which is for element */
+		if (mcpu_ep_n == mcpu_ep)
+			continue;
+
 		if (*nm_idx > nm_max)
 			break;
 
-		mcpu_ep_n = of_get_next_child(mcpu_port, mcpu_ep_n);
-		if (!mcpu_ep_n) {
-			ret = 0;
-			break;
-		}
-
 		mcodec_ep_n	= of_graph_get_remote_endpoint(mcpu_ep_n);
 		mcodec_port	= ep_to_port(mcodec_ep_n);
 
-		if (mcodec_ports != port_to_ports(mcodec_port))
+		if (mcodec_ports != port_to_ports(mcodec_port)) {
+			ret = -EINVAL;
 			goto mcpu_err;
-
-		codec_idx = 0;
-		mcodec_port_i = of_get_next_child(mcodec_ports, NULL);
-		while (1) {
-			if (codec_idx > dai_link->num_codecs)
-				goto mcodec_err;
-
-			mcodec_port_i = of_get_next_child(mcodec_ports, mcodec_port_i);
-
-			if (!mcodec_port_i)
-				goto mcodec_err;
-
-			if (mcodec_port_i == mcodec_port)
-				break;
-
-			codec_idx++;
 		}
 
-		dai_link->ch_maps[*nm_idx].cpu		= cpu_idx;
+		codec_idx = 0;
-		dai_link->ch_maps[*nm_idx].codec	= codec_idx;
+		ret = -EINVAL;
+		for_each_of_graph_port(mcodec_ports, mcodec_port_i) {
 
-		(*nm_idx)++;
+			/* ignore 1st port which is for pair connection */
+			if (mcodec_port_top == mcodec_port_i)
+				continue;
 
-		of_node_put(mcodec_port_i);
+			if (codec_idx > dai_link->num_codecs)
-mcodec_err:
+				break;
+
+			if (mcodec_port_i == mcodec_port) {
+				dai_link->ch_maps[*nm_idx].cpu	 = cpu_idx;
+				dai_link->ch_maps[*nm_idx].codec = codec_idx;
+
+				(*nm_idx)++;
+				ret = 0;
+				break;
+			}
+			codec_idx++;
+		}
 		of_node_put(mcodec_port);
-		of_node_put(mcpu_ep_n);
 		of_node_put(mcodec_ep_n);
+		if (ret < 0)
+			break;
 	}
 mcpu_err:
 	of_node_put(mcpu_ep);
@@ -677,7 +669,7 @@ static int graph_parse_node_single(struct simple_util_priv *priv,
 				   struct device_node *port,
 				   struct link_info *li, int is_cpu)
 {
-	struct device_node *ep = port_to_endpoint(port);
+	struct device_node *ep = of_graph_get_next_port_endpoint(port, NULL);
 	int ret = __graph_parse_node(priv, gtype, ep, li, is_cpu, 0);
 
 	of_node_put(ep);
@@ -772,7 +764,7 @@ static void graph_link_init(struct simple_util_priv *priv,
 		of_node_put(port_cpu);
 		port_cpu = ep_to_port(ep_cpu);
 	} else {
-		ep_cpu = port_to_endpoint(port_cpu);
+		ep_cpu = of_graph_get_next_port_endpoint(port_cpu, NULL);
 	}
 	ports_cpu = port_to_ports(port_cpu);
 
@@ -782,7 +774,7 @@ static void graph_link_init(struct simple_util_priv *priv,
 		of_node_put(port_cpu);
 		port_codec = ep_to_port(ep_codec);
 	} else {
-		ep_codec = port_to_endpoint(port_codec);
+		ep_codec = of_graph_get_next_port_endpoint(port_codec, NULL);
 	}
 	ports_codec = port_to_ports(port_codec);
 
@@ -853,7 +845,7 @@ int audio_graph2_link_normal(struct simple_util_priv *priv,
 			     struct link_info *li)
 {
 	struct device_node *cpu_port = lnk;
-	struct device_node *cpu_ep = port_to_endpoint(cpu_port);
+	struct device_node *cpu_ep = of_graph_get_next_port_endpoint(cpu_port, NULL);
 	struct device_node *codec_port = of_graph_get_remote_port(cpu_ep);
 	int ret;
 
@@ -886,7 +878,7 @@ int audio_graph2_link_dpcm(struct simple_util_priv *priv,
 			   struct device_node *lnk,
 			   struct link_info *li)
 {
-	struct device_node *ep = port_to_endpoint(lnk);
+	struct device_node *ep = of_graph_get_next_port_endpoint(lnk, NULL);
 	struct device_node *rep = of_graph_get_remote_endpoint(ep);
 	struct device_node *cpu_port = NULL;
 	struct device_node *codec_port = NULL;
@@ -1010,7 +1002,7 @@ int audio_graph2_link_c2c(struct simple_util_priv *priv,
 	of_node_get(lnk);
 	port0 = lnk;
 	ports = port_to_ports(port0);
-	port1 = of_get_next_child(ports, lnk);
+	port1 = of_graph_get_next_port(ports, port0);
 
 	/*
 	 * Card2 can use original Codec2Codec settings if DT has.
@@ -1040,8 +1032,8 @@ int audio_graph2_link_c2c(struct simple_util_priv *priv,
 		dai_link->num_c2c_params	= 1;
 	}
 
-	ep0 = port_to_endpoint(port0);
+	ep0 = of_graph_get_next_port_endpoint(port0, NULL);
-	ep1 = port_to_endpoint(port1);
+	ep1 = of_graph_get_next_port_endpoint(port1, NULL);
 
 	codec0_port = of_graph_get_remote_port(ep0);
 	codec1_port = of_graph_get_remote_port(ep1);
@@ -1147,7 +1139,7 @@ static int graph_counter(struct device_node *lnk)
 		 * CPU/Codec = N:M case has many endpoints.
 		 * We can't use of_graph_get_endpoint_count() here
 		 */
-		return of_get_child_count(ports) - 1;
+		return of_graph_get_port_count(ports) - 1;
 	}
 	/*
 	 * Single CPU / Codec
@@ -1161,7 +1153,7 @@ static int graph_count_normal(struct simple_util_priv *priv,
 			      struct link_info *li)
 {
 	struct device_node *cpu_port = lnk;
-	struct device_node *cpu_ep = port_to_endpoint(cpu_port);
+	struct device_node *cpu_ep = of_graph_get_next_port_endpoint(cpu_port, NULL);
 	struct device_node *codec_port = of_graph_get_remote_port(cpu_ep);
 
 	/*
@@ -1189,7 +1181,7 @@ static int graph_count_dpcm(struct simple_util_priv *priv,
 			    struct device_node *lnk,
 			    struct link_info *li)
 {
-	struct device_node *ep = port_to_endpoint(lnk);
+	struct device_node *ep = of_graph_get_next_port_endpoint(lnk, NULL);
 	struct device_node *rport = of_graph_get_remote_port(ep);
 
 	/*
@@ -1231,9 +1223,9 @@ static int graph_count_c2c(struct simple_util_priv *priv,
 {
 	struct device_node *ports = port_to_ports(lnk);
 	struct device_node *port0 = lnk;
-	struct device_node *port1 = of_get_next_child(ports, of_node_get(lnk));
+	struct device_node *port1 = of_graph_get_next_port(ports, of_node_get(port0));
-	struct device_node *ep0 = port_to_endpoint(port0);
+	struct device_node *ep0 = of_graph_get_next_port_endpoint(port0, NULL);
-	struct device_node *ep1 = port_to_endpoint(port1);
+	struct device_node *ep1 = of_graph_get_next_port_endpoint(port1, NULL);
 	struct device_node *codec0 = of_graph_get_remote_port(ep0);
 	struct device_node *codec1 = of_graph_get_remote_port(ep1);
 

sound/soc/generic/test-component.c

@@ -521,7 +521,6 @@ static int test_driver_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *node = dev->of_node;
-	struct device_node *ep;
 	const struct test_adata *adata = of_device_get_match_data(&pdev->dev);
 	struct snd_soc_component_driver *cdriv;
 	struct snd_soc_dai_driver *ddriv;
@@ -591,7 +590,7 @@ static int test_driver_probe(struct platform_device *pdev)
 	}
 
 	i = 0;
-	for_each_endpoint_of_node(node, ep) {
+	for_each_of_graph_port(node, port) {
 		snprintf(dname[i].name, TEST_NAME_LEN, "%s.%d", node->name, i);
 		ddriv[i].name = dname[i].name;