As talked about in commit 14d3ae2efeed ("ARM: 8507/1: dma-mapping: Use
DMA_ATTR_ALLOC_SINGLE_PAGES hint to optimize alloc"), it doesn't
really make sense to try to allocate contiguous chunks of memory for
video encoding/decoding. Let's switch the Mediatek vcodec driver to
pass DMA_ATTR_ALLOC_SINGLE_PAGES and take some of the stress off the
memory subsystem.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Both 'bs_dma' and 'dma_addr' are integers. No need to convert the
type from dma_addr_t to uint64_t again.
Fixes: d353c3c34af0 ("media: mediatek: vcodec: support 36 bits physical address")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi
is valid for future use.
Fixes: 590577a4e525 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The supported decoder commands are different for stateless and
stateful architectures. Add stateless decoder commands to fix
the v4l2-compliance test error below.
Codec ioctls:
VIDIOC_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
VIDIOC_TRY_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
VIDIOC_G_ENC_INDEX returned -1 (Inappropriate ioctl for device)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
VIDIOC_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
fail: v4l2-test-codecs.cpp(126): ret
test VIDIOC_(TRY_)DECODER_CMD: FAIL
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----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=JM5r
-----END PGP SIGNATURE-----
Merge tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New V4L2 ioctl VIDIOC_REMOVE_BUFS
- experimental support for using generic metaformats on V4L2 core
- New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x
- More cleanups at atomisp driver
- Usual bunch of driver cleanups, improvements and fixes
* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: bcm2835-unicam: Depend on COMMON_CLK
Revert "media: v4l2-ctrls: show all owned controls in log_status"
media: ov2740: Ensure proper reset sequence on probe()
media: intel/ipu6: Don't print user-triggerable errors to kernel log
media: bcm2835-unicam: Fix driver path in MAINTAINERS
media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
media: bcm2835-unicam: Do not print error when irq not found
media: bcm2835-unicam: Do not replace IRQ retcode during probe
media: bcm2835-unicam: Convert to platform remove callback returning void
media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
media: intel/ipu6: explicitly include vmalloc.h
media: cec.h: Fix kerneldoc
media: uvcvideo: Refactor iterators
media: v4l: async: refactor v4l2_async_create_ancillary_links
media: intel/ipu6: Don't re-allocate memory for firmware
media: dvb-frontends: tda10048: Fix integer overflow
media: tc358746: Use the correct div_ function
media: i2c: st-mipid02: Use the correct div function
media: tegra-vde: Refactor timeout handling
media: stk1160: Use min macro
...
Use an API that resembles more the actual use of job_count.
Found by cocci:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:527:5-24: WARNING: atomic_dec_and_test variation before object free at line 541.
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:578:6-25: WARNING: atomic_dec_and_test variation before object free at line 581.
Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-12-3c4865f5a4b0@chromium.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
It is possible that mtk_vcodec_enc_pw_on fails, and in that scenario
the PM counter is not incremented, and subsequent call to
mtk_vcodec_enc_pw_off decrements the counter, leading to a PM imbalance.
Fix by bailing out of venc_if_encode in the case when mtk_vcodec_enc_pw_on
fails.
Fixes: 4e855a6efa54 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In the MediaTek vcodec driver, while mtk_vcodec_mem_free() is mostly
called only when the buffer to free exists, there are some instances
that didn't do the check and triggered warnings in practice.
We believe those checks were forgotten unintentionally. Add the checks
back to fix the warnings.
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In mtk_vcodec_mem_free(), there are two cases where a NULL VA is passed:
- mem->size == 0: we are called to free no memory. This may happen when
we call mtk_vcodec_mem_free() twice or the memory has never been
allocated.
- mem->size > 0: we are called to free memory but without VA. This means
that we failed to free the memory for real.
Both cases are not expected to happen, and we want to have clearer error
messages to describe which one we just encountered.
Update the error messages to include more information for that purpose.
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In mtk_vcodec_mem_alloc() and mtk_vcodec_mem_free(), the value of
mem->size is not expected to change before and when using the DMA APIs
and debug print, so there's no point in keeping local copies of it.
Drop the local variable "size" in the mentioned functions, and update
printk format identifiers accordingly.
This makes the code slightly more visually consistent, and retrieve a
small amount of memory that is used for no real purpose.
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
mtk_v4l2_err() already uses dev_err(), so don't print the device name
again. Print the function name instead.
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The physical address on the MT8188 platform is larger than 32 bits,
change the type from unsigned int to dma_addr_t to be able to access
the high bits of the address.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a lock for the ctx_list, to avoid accessing a NULL pointer
within the 'vpu_enc_ipi_handler' function when the ctx_list has
been deleted due to an unexpected behavior on the SCP IP block.
Fixes: 1972e32431ed ("media: mediatek: vcodec: Fix possible invalid memory access for encoder")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The VP9 bitstream uses superframes, which each contain 8 sub-frames,
enable accessing the last superframe by increasing the range of the index
vaidation as the maximum number of superframes is 8 and not 7, so that the
last sub-frame can be decoded normally with the stateful VP9 decoder.
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The function descriptions where falsely copy pasted from another entry,
write more fitting descriptions for the functions.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Multiple issues detected while scanning the code by far not a complete
list of required changes but some small improvements.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Correct multiple different typos found in comments or function names.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The ipi handler here tries hard to maintain const-ness of its argument,
but by doing that causes a warning about function type casts:
drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c:38:32: error: cast from 'mtk_vcodec_ipi_handler' (aka 'void (*)(void *, unsigned int, void *)') to 'ipi_handler_t' (aka 'void (*)(const void *, unsigned int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
38 | ipi_handler_t handler_const = (ipi_handler_t)handler;
| ^~~~~~~~~~~~~~~~~~~~~~
Remove the hack and just use a non-const argument.
Fixes: bf1d556ad4e0 ("media: mtk-vcodec: abstract firmware interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Those fields have been removed. They do not need to be documented.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The field is gone, remove the documentation for it.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In some chips, MDP3 has the ability to utilize two pipelines to
parallelly process a single frame.
To enable this feature, multiple CMDQ clients and packets need to
be configured at the same time.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Extend the component settings used in MT8195 MDP3.
Additionally, it is crucial to read all component settings in
a specific manner to ensure that shared memory data structure lengths
are aligned across different platforms.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The configuration of the MT8195 components in the shared memory
is defined in the header file "mdp_sm_mt8195.h".
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add MT8195 MDP3 basic configuration in file "mdp_cfg_data.c"
and corresponding driver data.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Certain chips can combine several components to form complex virtual
units with advanced functions.
These components require simultaneous configuration of their MODs and
clocks.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Support for multiple RDMA/WROT waits for GCE events.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The amount of MDP3 driver probes is determined by the registered
clocks of MMSYS.
Since MT8195 MDP3 utilizes VPPSYS0 and VPPSYS1, it's necessary to
prevent multiple driver registrations.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Some components act as bridges only and do not require full configuration.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add configuration of more components in MT8195 MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Increasing the number of sets built by MMSYS and MUTEX in MT8195
will enable the creation of more pipelines in MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
After setting up the second set of MMSYS (VPPSYS1), it is necessary
to have a corresponding second set of MUTEX (MUTEX2) to assist in
handling SOF/EOF.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The MT8195 chipset features two MMSYS subsets: VPPSYS0 and VPPSYS1.
These subsets coordinate and control the clock, power, and
register settings required for the components of MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Drop obsolete @wait_key_frame and @mv_joint struct member descriptions.
This fixes two warnings:
drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp8_req_if.c:57: warning: Excess struct member 'wait_key_frame' description in 'vdec_vp8_slice_info'
drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:166: warning: Excess struct member 'mv_joint' description in 'vdec_vp9_slice_counts_map'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Instead of walking the entire parent node for something that has the
right compatible, use the scp_get() function provided by the MediaTek
SCP remoteproc driver to retrieve a handle to mtk_scp through the
devicetree "mediatek,scp" (phandle) property.
In case of multi-core SCP, this also allows to select a specific core.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set the maximum VP9 codec profile for each platform.
The various mediatek platforms support different profiles for decoding,
the profile of the codec limits the capabilities for decoding.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set the maximum VP9 codec level for each platform.
The various mediatek platforms support different levels for decoding, the
level of the codec limits among others the maximum resolution, bit rate,
frame rate and compression rate for the decoder.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set the maximum H265 codec profile for each platform.
The various mediatek platforms support different profiles for decoding,
the profile of the codec limits the capabilities for decoding.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set the maximum H264 codec profile for each platform.
The various mediatek platforms support different profiles for decoding,
the profile of the codec limits the capabilities for decoding.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set the maximum H265 codec level for each platform.
The various mediatek platforms support different levels for decoding, the
level of the codec limits among others the maximum resolution, bit rate
and frame rate for the decoder.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set the maximum H264 codec level for each platform.
The various mediatek platforms support different levels for decoding, the
level of the codec limits among others the maximum resolution, bit rate
and frame rate for the decoder.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Store the name of the chip in the context of the driver in order
to be able to choose the correct configuration values for the
different codecs.
Use a enum value instead of an integer to store a more descriptive name.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In mtk_jpegdec_worker, if error occurs in mtk_jpeg_set_dec_dst, it
will start the timeout worker and invoke v4l2_m2m_job_finish at
the same time. This will break the logic of design for there should
be only one function to call v4l2_m2m_job_finish. But now the timeout
handler and mtk_jpegdec_worker will both invoke it.
Fix it by start the worker only if mtk_jpeg_set_dec_dst successfully
finished.
Fixes: da4ede4b7fd6 ("media: mtk-jpeg: move data/code inside CONFIG_OF blocks")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work.
In mtk_jpeg_dec_device_run, if error happens in
mtk_jpeg_set_dec_dst, it will finally start the worker while
mark the job as finished by invoking v4l2_m2m_job_finish.
There are two methods to trigger the bug. If we remove the
module, it which will call mtk_jpeg_remove to make cleanup.
The possible sequence is as follows, which will cause a
use-after-free bug.
CPU0 CPU1
mtk_jpeg_dec_... |
start worker |
|mtk_jpeg_job_timeout_work
mtk_jpeg_remove |
v4l2_m2m_release |
kfree(m2m_dev); |
|
| v4l2_m2m_get_curr_priv
| m2m_dev->curr_ctx //use
If we close the file descriptor, which will call mtk_jpeg_release,
it will have a similar sequence.
Fix this bug by starting timeout worker only if started jpegdec worker
successfully. Then v4l2_m2m_job_finish will only be called in
either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run.
Fixes: b2f0d2724ba4 ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch reverts commit c677d7ae8314
("media: mtk-jpeg: Fix use after free bug due to uncanceled work").
The job_timeout_work is initialized only for
the single-core JPEG device so it will cause the crash for multi-core
JPEG devices.
Fix it by removing the cancel_delayed_work_sync function.
Fixes: c677d7ae8314 ("media: mtk-jpeg: Fix use after free bug due to uncanceled work")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This config option was added during the development of the Request API
to make it easy to disable it.
The Request API is now stable so it is time to drop this option altogether.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Bin Liu <bin.liu@mediatek.com>
CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
