A concurrent file creation and little writing could unexpectedly return
-ENOSPC error since there is a race window that the allocator could get
the wrong agf->agf_longest.
Write file process steps:
1) Find the entry that best meets the conditions, then calculate the start
address and length of the remaining part of the entry after allocation.
2) Delete this entry and update the -current- agf->agf_longest.
3) Insert the remaining unused parts of this entry based on the
calculations in 1), and update the agf->agf_longest again if necessary.
Create file process steps:
1) Check whether there are free inodes in the inode chunk.
2) If there is no free inode, check whether there has space for creating
inode chunks, perform the no-lock judgment first.
3) If the judgment succeeds, the judgment is performed again with agf lock
held. Otherwire, an error is returned directly.
If the write process is in step 2) but not go to 3) yet, the create file
process goes to 2) at this time, it may be mistaken for no space,
resulting in the file system still has space but the file creation fails.
We have sent two different commits to the community in order to fix this
problem[1][2]. Unfortunately, both solutions have flaws. In [2], I
discussed with Dave and Darrick, realized that a better solution to this
problem requires the "last cnt record tracking" to be ripped out of the
generic btree code. And surprisingly, Dave directly provided his fix code.
This patch includes appropriate modifications based on his tmp-code to
address this issue.
The entire fix can be roughly divided into two parts:
1) Delete the code related to lastrec-update in the generic btree code.
2) Place the process of updating longest freespace with cntbt separately
to the end of the cntbt modifications. Move the cursor to the rightmost
firstly, and update the longest free extent based on the record.
Note that we can not update the longest with xfs_alloc_get_rec() after
find the longest record, as xfs_verify_agbno() may not pass because
pag->block_count is updated on the outside. Therefore, use
xfs_btree_get_rec() as a replacement.
[1] https://lore.kernel.org/all/20240419061848.1032366-2-yebin10@huawei.com
[2] https://lore.kernel.org/all/20240604071121.3981686-1-wozizhi@huawei.com
Reported by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Adapt the generic btree cursor code to be able to create a btree whose
buffers come from a (presumably in-memory) buftarg with a header block
that's specific to in-memory btrees. We'll connect this to other parts
of online scrub in the next patches.
Note that in-memory btrees always have a block size matching the system
memory page size for efficiency reasons. There are also a few things we
need to do to finalize a btree update; that's covered in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This only has a single caller and thus might be a bit questionable,
but I think it really improves the readability of
xfs_btree_visit_block.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Despite its name, xfs_btree_read_bufl doesn't contain any btree-related
functionaliy and isn't used by the btree code. Move it to xfs_bmap.c,
hard code the refval and ops arguments and rename it to
xfs_bmap_read_buf.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs_btree_reada_bufl just wraps xfs_btree_readahead and a agblock
to daddr conversion. Just open code it's three callsites in the
two callers (One of which isn't even btree related).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs_btree_reada_bufl just wraps xfs_btree_readahead and a fsblock
to daddr conversion. Just open code it's two callsites in the only
caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
This will allow sharing code with the in-memory block checking helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
All these helpers hardcode fsblocks or agblocks and not just the pointer
size. Rename them so that the names are still fitting when we add the
long format in-memory blocks and adjust the checks when calling them to
check the btree types and not just pointer length.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add a __xfs_btree_check_block helper that can be called by the scrub code
to validate a btree block of any form, and move the duplicate error
handling code from xfs_btree_check_sblock and xfs_btree_check_lblock into
xfs_btree_check_block and thus remove these two helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Check that root blocks that sit in the inode fork and thus have a NULL
bp don't have siblings.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
crc is only used once, just use the xfs_has_crc check directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Remove the local crc variable that is only used once and remove the bp
NULL checking as it can't ever be NULL for short form blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Merge xfs_btree_check_sptr and xfs_btree_check_lptr into a single
__xfs_btree_check_ptr that can be shared between xfs_btree_check_ptr
and the scrub code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Stop using xfs_btree_check_lptr in xfs_btree_check_lblock_siblings,
as it only duplicates the xfs_verify_fsbno call in the other leg of
if / else besides adding a tautological level check.
With this the cur and level arguments can be removed as they are
now unused.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Stop using xfs_btree_check_sptr in xfs_btree_check_sblock_siblings,
as it only duplicates the xfs_verify_agbno call in the other leg of
if / else besides adding a tautological level check.
With this the cur and level arguments can be removed as they are
now unused.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The last checks for bc_btnum can be replaced with helpers that check
the btree ops. This allows adding new btrees to XFS without having
to update a global enum.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: complete the ops predicates]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The btnum in struct xfs_btree_ops is often used for printing a symbolic
name for the btree. Add a name field to the ops structure and use that
directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add a few conditionals for staging btrees to the core btree code instead
of overloading the bc_ops vector.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Inode-rooted btrees don't need to initialize the root pointer in the
->init_ptr_from_cur method as the root is found by the
xfs_btree_get_iroot method later. Make ->init_ptr_from_cur option
for inode rooted btrees by providing a helper that does the right
thing for the given btree type and also documents the semantics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Create a predicate to decide if the given cursor and level point to the
root block in the inode immediate area instead of a disk block, and get
rid of the open-coded logic everywhere.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Split up the union that encodes btree-specific fields in struct
xfs_btree_cur. Most fields in there are specific to the btree type
encoded in xfs_btree_ops.type, and we can use the obviously named union
for that. But one field is specific to the bmapbt and two are shared by
the refcount and rtrefcountbt. Move those to a separate union to make
the usage clear and not need a separate struct for the refcount-related
fields.
This will also make unnecessary some very awkward btree cursor
refc/rtrefc switching logic in the rtrefcount patchset.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Two of the btree cursor flags are always used together and encode
the fundamental btree type. There currently are two such types:
1) an on-disk AG-rooted btree with 32-bit pointers
2) an on-disk inode-rooted btree with 64-bit pointers
and we're about to add:
3) an in-memory btree with 64-bit pointers
Introduce a new enum and a new type field in struct xfs_btree_geom
to encode this type directly instead of using flags and change most
code to switch on this enum.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: make the pointer lengths explicit]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Make the pointer length an explicit field in the btree operations
structure so that the next patch (which introduces an explicit btree
type enum) doesn't have to play a bunch of awkward games with inferring
the pointer length from the enumeration.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Hoist the btree block owner check into a separate helper so that we
don't have an ugly multiline if statement.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Split out a helper to calculate the owner for a given btree instead of
duplicating the logic in two places. While we're at it, make the
bc_ag/bc_ino switch logic depend on the correct geometry flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: break this up into two patches for the owner check]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Move the btree buffer LRU refcount to the btree ops structure so that we
can eliminate the last bc_btnum switch in the generic btree code. We're
about to create repair-specific btree types, and we don't want that
stuff cluttering up libxfs.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Set the btree block buffer ops in xfs_btree_init_buf since we already
have access to that information through the btree ops.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that all of the callers pass XFS_BUF_DADDR_NULL as the daddr
parameter, we can elide that too.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Convert any place we call xfs_btree_init_block with a buffer to use the
_init_buf function.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rename xfs_btree_init_block_int to xfs_btree_init_block, and
xfs_btree_init_block to xfs_btree_init_buf so that the name suggests the
type that caller are supposed to pass in.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Notice now that the btree ops structure encodes btree geometry flags and
the magic number through the buffer ops. Refactor the btree block
initialization functions to use the btree ops so that we no longer have
to open code all that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Just move the two flags into bc_flags where there is plenty of space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Certain btree flags never change for the life of a btree cursor because
they describe the geometry of the btree itself. Encode these in the
btree ops structure and reduce the amount of code required in each btree
type's init_cursor functions. This also frees up most of the bits in
bc_flags.
A previous version of this patch also converted the open-coded flags
logic to helpers. This was removed due to the pending refactoring (that
follows this patch) to eliminate most of the state flags.
Conversion script:
sed \
-e 's/XFS_BTREE_LONG_PTRS/XFS_BTGEO_LONG_PTRS/g' \
-e 's/XFS_BTREE_ROOT_IN_INODE/XFS_BTGEO_ROOT_IN_INODE/g' \
-e 's/XFS_BTREE_LASTREC_UPDATE/XFS_BTGEO_LASTREC_UPDATE/g' \
-e 's/XFS_BTREE_OVERLAPPING/XFS_BTGEO_OVERLAPPING/g' \
-e 's/cur->bc_flags & XFS_BTGEO_/cur->bc_ops->geom_flags \& XFS_BTGEO_/g' \
-i $(git ls-files fs/xfs/*.[ch] fs/xfs/libxfs/*.[ch] fs/xfs/scrub/*.[ch])
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
All existing btree types set XFS_BTREE_CRC_BLOCKS when running against a
V5 filesystem. All currently proposed btree types are V5 only and use
the richer XFS_BTREE_CRC_BLOCKS format. Therefore, we can drop this
flag and change the conditional to xfs_has_crc.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Don't waste tracepoint segment memory on per-btree block allocation
tracepoints when we can do it from the generic btree code.
With this patch applied, two tracepoints are collapsed into one
tracepoint, with the following effects on objdump -hx xfs.ko output:
Before:
10 __tracepoints_ptrs 00000b38 0000000000000000 0000000000000000 001412f0 2**2
14 __tracepoints_strings 00005433 0000000000000000 0000000000000000 001689a0 2**5
29 __tracepoints 00010d30 0000000000000000 0000000000000000 0023fe00 2**5
After:
10 __tracepoints_ptrs 00000b34 0000000000000000 0000000000000000 001417b0 2**2
14 __tracepoints_strings 00005413 0000000000000000 0000000000000000 00168e80 2**5
29 __tracepoints 00010cd0 0000000000000000 0000000000000000 00240760 2**5
Column 3 is the section size in bytes; removing these two tracepoints
reduces the size of the ELF segments by 132 bytes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Don't waste memory on extra per-btree block freeing tracepoints when we
can do it from the generic btree code.
With this patch applied, two tracepoints are collapsed into one
tracepoint, with the following effects on objdump -hx xfs.ko output:
Before:
10 __tracepoints_ptrs 00000b3c 0000000000000000 0000000000000000 00140eb0 2**2
14 __tracepoints_strings 00005453 0000000000000000 0000000000000000 00168540 2**5
29 __tracepoints 00010d90 0000000000000000 0000000000000000 0023f5e0 2**5
After:
10 __tracepoints_ptrs 00000b38 0000000000000000 0000000000000000 001412f0 2**2
14 __tracepoints_strings 00005433 0000000000000000 0000000000000000 001689a0 2**5
29 __tracepoints 00010d30 0000000000000000 0000000000000000 0023fe00 2**5
Column 3 is the section size in bytes; removing these two tracepoints
reduces the size of the ELF segments by 132 bytes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Whenever we encounter XFS_IS_CORRUPT failures, we should report that to
the health monitoring system for later reporting.
I started with this semantic patch and massaged everything until it
built:
@@
expression mp, test;
@@
- if (XFS_IS_CORRUPT(mp, test)) return -EFSCORRUPTED;
+ if (XFS_IS_CORRUPT(mp, test)) { xfs_btree_mark_sick(cur); return -EFSCORRUPTED; }
@@
expression mp, test;
identifier label, error;
@@
- if (XFS_IS_CORRUPT(mp, test)) { error = -EFSCORRUPTED; goto label; }
+ if (XFS_IS_CORRUPT(mp, test)) { xfs_btree_mark_sick(cur); error = -EFSCORRUPTED; goto label; }
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Whenever we encounter corrupt btree blocks, we should report that to the
health monitoring system for later reporting.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The remaining callers of kmem_free() are freeing heap memory, so
we can convert them directly to kfree() and get rid of kmem_free()
altogether.
This conversion was done with:
$ for f in `git grep -l kmem_free fs/xfs`; do
> sed -i s/kmem_free/kfree/ $f
> done
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
When constructing a new btree, xfs_btree_bload_node needs to read the
btree blocks for level N to compute the keyptrs for the blocks that will
be loaded into level N+1. The level N blocks must be formatted at that
point.
A subsequent patch will change the btree bulkloader to write new btree
blocks in 256K chunks to moderate memory consumption if the new btree is
very large. As a consequence of that, it's possible that the buffers
for lower level blocks might have been reclaimed by the time the node
builder comes back to the block.
Therefore, change xfs_btree_bload_node to read the lower level blocks
to handle the reclaimed buffer case. As a side effect, the read will
increase the LRU refs, which will bias towards keeping new btree buffers
in memory after the new btree commits.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
For keyspace fullness scans, we want to be able to mask off the parts of
the key that we don't care about. For most btree types we /do/ want the
full keyspace, but for checking that a given space usage also has a full
complement of rmapbt records (even if different/multiple owners) we need
this masking so that we only track sparseness of rm_startblock, not the
whole keyspace (which is extremely sparse).
Augment the ->diff_two_keys and ->keys_contiguous helpers to take a
third union xfs_btree_key argument, and wire up xfs_rmap_has_records to
pass this through. This third "mask" argument should contain a nonzero
value in each structure field that should be used in the key comparisons
done during the scan.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The current implementation of xfs_btree_has_record returns true if it
finds /any/ record within the given range. Unfortunately, that's not
sufficient for scrub. We want to be able to tell if a range of keyspace
for a btree is devoid of records, is totally mapped to records, or is
somewhere in between. By forcing this to be a boolean, we conflated
sparseness and fullness, which caused scrub to return incorrect results.
Fix the API so that we can tell the caller which of those three is the
current state.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create wrapper functions around ->diff_two_keys so that we don't have to
remember what the return values mean, and adjust some of the code
comments to reflect the longtime code behavior. We're going to
introduce more uses of ->diff_two_keys in the next patch, so reduce the
cognitive load for readers by doing this refactoring now.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We keep doing these conversions to support btree queries, so refactor
this into a helper.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The tp->t_firstblock field is now raelly tracking the highest AG we
have locked, not the block number of the highest allocation we've
made. It's purpose is to prevent AGF locking deadlocks, so rename it
to "highest AG" and simplify the implementation to just track the
agno rather than a fsbno.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
When we split a BMBT due to record insertion, we offload it to a
worker thread because we can be deep in the stack when we try to
allocate a new block for the BMBT. Allocation can use several
kilobytes of stack (full memory reclaim, swap and/or IO path can
end up on the stack during allocation) and we can already be several
kilobytes deep in the stack when we need to split the BMBT.
A recent workload demonstrated a deadlock in this BMBT split
offload. It requires several things to happen at once:
1. two inodes need a BMBT split at the same time, one must be
unwritten extent conversion from IO completion, the other must be
from extent allocation.
2. there must be a no available xfs_alloc_wq worker threads
available in the worker pool.
3. There must be sustained severe memory shortages such that new
kworker threads cannot be allocated to the xfs_alloc_wq pool for
both threads that need split work to be run
4. The split work from the unwritten extent conversion must run
first.
5. when the BMBT block allocation runs from the split work, it must
loop over all AGs and not be able to either trylock an AGF
successfully, or each AGF is is able to lock has no space available
for a single block allocation.
6. The BMBT allocation must then attempt to lock the AGF that the
second task queued to the rescuer thread already has locked before
it finds an AGF it can allocate from.
At this point, we have an ABBA deadlock between tasks queued on the
xfs_alloc_wq rescuer thread and a locked AGF. i.e. The queued task
holding the AGF lock can't be run by the rescuer thread until the
task the rescuer thread is runing gets the AGF lock....
This is a highly improbably series of events, but there it is.
There's a couple of ways to fix this, but the easiest way to ensure
that we only punt tasks with a locked AGF that holds enough space
for the BMBT block allocations to the worker thread.
This works for unwritten extent conversion in IO completion (which
doesn't have a locked AGF and space reservations) because we have
tight control over the IO completion stack. It is typically only 6
functions deep when xfs_btree_split() is called because we've
already offloaded the IO completion work to a worker thread and
hence we don't need to worry about stack overruns here.
The other place we can be called for a BMBT split without a
preceeding allocation is __xfs_bunmapi() when punching out the
center of an existing extent. We don't remove extents in the IO
path, so these operations don't tend to be called with a lot of
stack consumed. Hence we don't really need to ship the split off to
a worker thread in these cases, either.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Lately I've been stress-testing extreme-sized rmap btrees by using the
(new) xfs_db bmap_inflate command to clone bmbt mappings billions of
times and then using xfs_repair to build new rmap and refcount btrees.
This of course is /much/ faster than actually FICLONEing a file billions
of times.
Unfortunately, xfs_repair fails in xfs_btree_bload_compute_geometry with
EOVERFLOW, which indicates that xfs_mount.m_rmap_maxlevels is not
sufficiently large for the test scenario. For a 1TB filesystem (~67
million AG blocks, 4 AGs) the btheight command reports:
$ xfs_db -c 'btheight -n 4400801200 -w min rmapbt' /dev/sda
rmapbt: worst case per 4096-byte block: 84 records (leaf) / 45 keyptrs (node)
level 0: 4400801200 records, 52390491 blocks
level 1: 52390491 records, 1164234 blocks
level 2: 1164234 records, 25872 blocks
level 3: 25872 records, 575 blocks
level 4: 575 records, 13 blocks
level 5: 13 records, 1 block
6 levels, 53581186 blocks total
The AG is sufficiently large to build this rmap btree. Unfortunately,
m_rmap_maxlevels is 5. Augmenting the loop in the space->height
function to report height, node blocks, and blocks remaining produces
this:
ht 1 node_blocks 45 blockleft 67108863
ht 2 node_blocks 2025 blockleft 67108818
ht 3 node_blocks 91125 blockleft 67106793
ht 4 node_blocks 4100625 blockleft 67015668
final height: 5
The goal of this function is to compute the maximum height btree that
can be stored in the given number of ondisk fsblocks. Starting with the
top level of the tree, each iteration through the loop adds the fanout
factor of the next level down until we run out of blocks. IOWs, maximum
height is achieved by using the smallest fanout factor that can apply
to that level.
However, the loop setup is not correct. Top level btree blocks are
allowed to contain fewer than minrecs items, so the computation is
incorrect because the first time through the loop it should be using a
fanout factor of 2. With this corrected, the above becomes:
ht 1 node_blocks 2 blockleft 67108863
ht 2 node_blocks 90 blockleft 67108861
ht 3 node_blocks 4050 blockleft 67108771
ht 4 node_blocks 182250 blockleft 67104721
ht 5 node_blocks 8201250 blockleft 66922471
final height: 6
Fixes: 9ec691205e7d ("xfs: compute the maximum height of the rmap btree when reflink enabled")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We're about to make this logic do a bit more, so convert the macro to a
static inline function for better typechecking and fewer shouty macros.
No functional changes here.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
There is a lot of overhead in functions like xfs_verify_agbno() that
repeatedly calculate the geometry limits of an AG. These can be
pre-calculated as they are static and the verification context has
a per-ag context it can quickly reference.
In the case of xfs_verify_agbno(), we now always have a perag
context handy, so we can store the AG length and the minimum valid
block in the AG in the perag. This means we don't have to calculate
it on every call and it can be inlined in callers if we move it
to xfs_ag.h.
Move xfs_ag_block_count() to xfs_ag.c because it's really a
per-ag function and not an XFS type function. We need a little
bit of rework that is specific to xfs_initialise_perag() to allow
growfs to calculate the new perag sizes before we've updated the
primary superblock during the grow (chicken/egg situation).
Note that we leave the original xfs_verify_agbno in place in
xfs_types.c as a static function as other callers in that file do
not have per-ag contexts so still need to go the long way. It's been
renamed to xfs_verify_agno_agbno() to indicate it takes both an agno
and an agbno to differentiate it from new function.
Future commits will make similar changes for other per-ag geometry
validation functions.
Further:
$ size --totals fs/xfs/built-in.a
text data bss dec hex filename
before 1483006 329588 572 1813166 1baaae (TOTALS)
after 1482185 329588 572 1812345 1ba779 (TOTALS)
This rework reduces the binary size by ~820 bytes, indicating
that much less work is being done to bounds check the agbno values
against on per-ag geometry information.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
