When more than 64 VFs are enabled for a PF then mbox communication
between VF and PF is not working as mbox work queueing for few VFs
are skipped due to wrong calculation of VF numbers.
Fixes: d424b6c02415 ("octeontx2-pf: Enable SRIOV and added VF mbox handling")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/1700930042-5400-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts
by default") tries to disable MMC interrupts to avoid a storm of
unhandled interrupts, but leaves the FPE(Frame Preemption) MMC
interrupts enabled, FPE MMC interrupts can cause the same problem.
Now we mask FPE TX and RX interrupts to disable all MMC interrupts.
Fixes: aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231125060126.2328690-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A loop in rvu_mbox_handler_nix_bandprof_free() contains
a break if (idx == MAX_BANDPROF_PER_PFFUNC),
but if idx may reach MAX_BANDPROF_PER_PFFUNC
buffer '(*req->prof_idx)[layer]' overflow happens before that check.
The patch moves the break to the
beginning of the loop.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e8e095b3b370 ("octeontx2-af: cn10k: Bandwidth profiles config support").
Signed-off-by: Elena Salomatkina <elena.salomatkina.cmc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20231124210802.109763-1-elena.salomatkina.cmc@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Willem de Bruijn says:
====================
selftests/net: fix a few small compiler warnings
Observed a clang warning when backporting cmsg_sender.
Ran the same build against all the .c files under selftests/net.
This is clang-14 with -Wall
Which is what tools/testing/selftests/net/Makefile also enables.
====================
Link: https://lore.kernel.org/r/20231124171645.1011043-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Same init_rng() in both tests. The function reads /dev/urandom to
initialize srand(). In case of failure, it falls back onto the
entropy in the uninitialized variable. Not sure if this is on purpose.
But failure reading urandom should be rare, so just fail hard. While
at it, convert to getrandom(). Which man 4 random suggests is simpler
and more robust.
mptcp_inq.c:525:6:
mptcp_connect.c:1131:6:
error: variable 'foo' is used uninitialized
whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Fixes: b51880568f20 ("selftests: mptcp: add inq test case")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Willem de Bruijn <willemb@google.com>
----
When input is randomized because this is expected to meaningfully
explore edge cases, should we also add
1. logging the random seed to stdout and
2. adding a command line argument to replay from a specific seed
I can do this in net-next, if authors find it useful in this case.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231124171645.1011043-5-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove an unused variable.
diag_uid.c:151:24:
error: unused variable 'udr'
[-Werror,-Wunused-variable]
Fixes: ac011361bd4f ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signedness of char is signed on x86_64, but unsigned on arm64.
Fix the warning building cmsg_sender.c on signed platforms or
forced with -fsigned-char:
msg_sender.c:455:12:
error: implicit conversion from 'int' to 'char'
changes value from 128 to -128
[-Werror,-Wconstant-conversion]
buf[0] = ICMPV6_ECHO_REQUEST;
constant ICMPV6_ECHO_REQUEST is 128.
Link: https://lwn.net/Articles/911914
Fixes: de17e305a810 ("selftests: net: cmsg_sender: support icmp and raw sockets")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a small compiler warning.
nr_process must be a signed long: it is assigned a signed long by
strtol() and is compared against LONG_MIN and LONG_MAX.
ipsec.c:2280:65:
error: result of comparison of constant -9223372036854775808
with expression of type 'unsigned int' is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
if ((errno == ERANGE && (nr_process == LONG_MAX || nr_process == LONG_MIN))
Fixes: bc2652b7ae1e ("selftest/net/xfrm: Add test for ipsec tunnel")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update code comment to clarify that the only element whose layout is
not randomized is a proper C99 flexible-array member. This update is
complementary to commit 1ee60356c2dc ("gcc-plugins: randstruct: Only
warn about true flexible arrays")
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZWJr2MWDjXLHE8ap@work
Fixes: 1ee60356c2dc ("gcc-plugins: randstruct: Only warn about true flexible arrays")
Signed-off-by: Kees Cook <keescook@chromium.org>
Recently the kernel test robot has reported an ARM-specific BUILD_BUG_ON()
in an old and unmaintained wil6210 wireless driver. The problem comes from
the structure packing rules of old ARM ABI ('-mabi=apcs-gnu'). For example,
the following structure is packed to 18 bytes instead of 16:
struct poorly_packed {
unsigned int a;
unsigned int b;
unsigned short c;
union {
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed));
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed)) inner;
};
} __attribute__((packed));
To fit it into 16 bytes, it's required to add packed attribute to the
container union as well:
struct poorly_packed {
unsigned int a;
unsigned int b;
unsigned short c;
union {
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed));
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed)) inner;
} __attribute__((packed));
} __attribute__((packed));
Thanks to Andrew Pinski of GCC team for sorting the things out at
https://gcc.gnu.org/pipermail/gcc/2023-November/242888.html.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311150821.cI4yciFE-lkp@intel.com
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231120110607.98956-1-dmantipov@yandex.ru
Fixes: 50d7bd38c3aa ("stddef: Introduce struct_group() helper macro")
Signed-off-by: Kees Cook <keescook@chromium.org>
As discussed at the ClangBuiltLinux '23 meetup (co-located with Linux Plumbers
Conf '23), I'll be taking a step back from kernel work to focus on my growing
family and helping Google figure out its libc story. So I think it's time to
formally hand over the reigns to my co-maintainer Nathan.
As such, remove myself from reviewer for:
- CLANG CONTROL FLOW INTEGRITY SUPPORT
- COMPILER ATTRIBUTES
- KERNEL BUILD
For CLANG/LLVM BUILD SUPPORT I'm bumping myself down from maintainer to
reviewer, adding Bill and Justin, and removing Tom (Tom and I confirmed this
via private email; thanks for the work done Tom, ++beers_owed).
It has been my pleasure to work with everyone to improve the toolchain
portability of the Linux kernel, and to help bring LLVM to the table as a
competitor. The work here is not done. I have a few last LLVM patches in the
works to improve stack usage of clang which has been our longest standing open
issue (getting "rm" inline asm constraints to DTRT is part of that). But
looking back I'm incredibly proud of where we are to today relative to where we
were when we started the ClangBuiltLinux journey, and am confident that the
team and processes we have put in place will continue to be successful. I
continue to believe that a rising tide will lift all boats.
I identify first and foremost as a Linux kernel developer, and an LLVM dev
second. May it be a cold day in hell when that changes.
Wake me when you need me.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Bill Wendling <morbo@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231117-maintainers-v1-1-85f2a7422ed9@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
This flag only applies to the SQ and CQ rings, it's perfectly valid
to use a mmap approach for the provided ring buffers. Move the
check into where it belongs.
Cc: stable@vger.kernel.org
Fixes: 03d89a2de25b ("io_uring: support for user allocated memory for rings/sqes")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The IFLA_NETKIT_PEER_INFO attribute can only be used during device
creation, but not via changelink callback. Hence reject it there.
Fixes: 35dfaad7188c ("netkit, bpf: Add bpf programmable net device")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/e86a277a1e8d3b19890312779e42f790b0605ea4.1701115314.git.daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When scanning namespaces, it is possible to get valid data from the first
call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second
call in nvme_update_ns_info_block(). In particular, if the NSID becomes
inactive between the two commands, a storage device may return a buffer
filled with zero as per 4.1.5.1. In this case, we can get a kernel crash
due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will
be set to zero.
PID: 326 TASK: ffff95fec3cd8000 CPU: 29 COMMAND: "kworker/u98:10"
#0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7
#1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa
#2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788
#3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb
#4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce
#5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595
#6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6
#7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926
[exception RIP: blk_stack_limits+434]
RIP: ffffffff92191872 RSP: ffffad8f8702fc80 RFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff95efa0c91800 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001
RBP: 00000000ffffffff R8: ffff95fec7df35a8 R9: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff95fed33c09a8
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core]
#9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core]
This happened when the check for valid data was moved out of nvme_identify_ns()
into one of the callers. Fix this by checking in both callers.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186
Fixes: 0dd6fff2aad4 ("nvme: bring back auto-removal of deleted namespaces during sequential scan")
Cc: stable@vger.kernel.org
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Merge ARM cpufreq fixes for 6.7-rc4 from Viresh Kumar.
These fix issues related to power domains in the qcom cpufreq driver
and an OPP-related issue in the imx6q cpufreq driver.
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
pmdomain: qcom: rpmpd: Set GENPD_FLAG_ACTIVE_WAKEUP
cpufreq: qcom-nvmem: Preserve PM domain votes in system suspend
cpufreq: qcom-nvmem: Enable virtual power domain devices
cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily
The acpi_video code was storing the acpi_video_device as driver_data
in the acpi_device children of the acpi_video_bus acpi_device.
But the acpi_video driver only binds to the bus acpi_device.
It uses, but does not bind to, the children. Since it is not
the driver it should not be using the driver_data of the children's
acpi_device-s.
Since commit 0d16710146a1 ("ACPI: bus: Set driver_data to NULL every
time .add() fails") the childen's driver_data ends up getting set
to NULL after a driver fails to bind to the children leading to a NULL
pointer deref in video_get_max_state when registering the cooling-dev:
[ 3.148958] BUG: kernel NULL pointer dereference, address: 0000000000000090
<snip>
[ 3.149015] Hardware name: Sony Corporation VPCSB2X9R/VAIO, BIOS R2087H4 06/15/2012
[ 3.149021] RIP: 0010:video_get_max_state+0x17/0x30 [video]
<snip>
[ 3.149105] Call Trace:
[ 3.149110] <TASK>
[ 3.149114] ? __die+0x23/0x70
[ 3.149126] ? page_fault_oops+0x171/0x4e0
[ 3.149137] ? exc_page_fault+0x7f/0x180
[ 3.149147] ? asm_exc_page_fault+0x26/0x30
[ 3.149158] ? video_get_max_state+0x17/0x30 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[ 3.149176] ? __pfx_video_get_max_state+0x10/0x10 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[ 3.149192] __thermal_cooling_device_register.part.0+0xf2/0x2f0
[ 3.149205] acpi_video_bus_register_backlight.part.0.isra.0+0x414/0x570 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[ 3.149227] acpi_video_register_backlight+0x57/0x80 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f]
[ 3.149245] intel_acpi_video_register+0x68/0x90 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a]
[ 3.149669] intel_display_driver_register+0x28/0x50 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a]
[ 3.150064] i915_driver_probe+0x790/0xb90 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a]
[ 3.150402] local_pci_probe+0x45/0xa0
[ 3.150412] pci_device_probe+0xc1/0x260
<snip>
Fix this by directly using the acpi_video_device as devdata for
the cooling-device, which avoids the need to set driver-data on
the children at all.
Fixes: 0d16710146a1 ("ACPI: bus: Set driver_data to NULL every time .add() fails")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9718
Cc: 6.6+ <stable@vger.kernel.org> # 6.6+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In case of error, free the nvme_id_ns structure that was allocated
by nvme_identify_ns().
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Keep-alive commands are sent half-way through the kato period.
This normally works well but fails when the keep-alive system is
started when we are more than half way through the kato.
This can happen on larger setups or due to host delays.
With this change we now time the initial keep-alive command from
the controller initialisation time, rather than the keep-alive
mechanism activation time.
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The driver could possibly sleep while in atomic context resulting
in the following call trace while CONFIG_DEBUG_ATOMIC_SLEEP=y is
set:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2817, name: bash
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Call Trace:
<TASK>
dump_stack_lvl+0x36/0x50
__might_resched+0x123/0x170
mutex_lock+0x1e/0x50
pds_vfio_put_lm_file+0x1e/0xa0 [pds_vfio_pci]
pds_vfio_put_save_file+0x19/0x30 [pds_vfio_pci]
pds_vfio_state_mutex_unlock+0x2e/0x80 [pds_vfio_pci]
pci_reset_function+0x4b/0x70
reset_store+0x5b/0xa0
kernfs_fop_write_iter+0x137/0x1d0
vfs_write+0x2de/0x410
ksys_write+0x5d/0xd0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
This can happen if pds_vfio_put_restore_file() and/or
pds_vfio_put_save_file() grab the mutex_lock(&lm_file->lock)
while the spin_lock(&pds_vfio->reset_lock) is held, which can
happen during while calling pds_vfio_state_mutex_unlock().
Fix this by changing the reset_lock to reset_mutex so there are no such
conerns. Also, make sure to destroy the reset_mutex in the driver specific
VFIO device release function.
This also fixes a spinlock bad magic BUG that was caused
by not calling spinlock_init() on the reset_lock. Since, the lock is
being changed to a mutex, make sure to call mutex_init() on it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/kvm/1f9bc27b-3de9-4891-9687-ba2820c1b390@moroto.mountain/
Fixes: bb500dbe2ac6 ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231122192532.25791-3-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The following BUG was found when running on a kernel with
CONFIG_DEBUG_MUTEXES=y set:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
RIP: 0010:mutex_trylock+0x10d/0x120
Call Trace:
<TASK>
? __warn+0x85/0x140
? mutex_trylock+0x10d/0x120
? report_bug+0xfc/0x1e0
? handle_bug+0x3f/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? mutex_trylock+0x10d/0x120
? mutex_trylock+0x10d/0x120
pds_vfio_reset+0x3a/0x60 [pds_vfio_pci]
pci_reset_function+0x4b/0x70
reset_store+0x5b/0xa0
kernfs_fop_write_iter+0x137/0x1d0
vfs_write+0x2de/0x410
ksys_write+0x5d/0xd0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
As shown, lock->magic != lock. This is because
mutex_init(&pds_vfio->state_mutex) is called in the VFIO open path. So,
if a reset is initiated before the VFIO device is opened the mutex will
have never been initialized. Fix this by calling
mutex_init(&pds_vfio->state_mutex) in the VFIO init path.
Also, don't destroy the mutex on close because the device may
be re-opened, which would cause mutex to be uninitialized. Fix this by
implementing a driver specific vfio_device_ops.release callback that
destroys the mutex before calling vfio_pci_core_release_dev().
Fixes: bb500dbe2ac6 ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231122192532.25791-2-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When looking up DMIC blob from the NHLT table and the format is 32 bits,
ignore the vbps matching for 32 bps for DMIC since some NHLT table have
the vbps as 24, some have it as 32.
The DMIC hardware supports only one type of 32 bit sample size, which is
24 bit sampling on the MSB side and bits[1:0] is used for indicating the
channel number.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231127111658.17275-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
io_sqes_map() is used rather than io_mem_alloc(), if the application
passes in memory for mapping rather than have the kernel allocate it and
then mmap(2) the ranges. This then calls __io_uaddr_map() to perform the
page mapping and pinning, which checks if we end up with the same pages,
if more than one page is mapped. But this check is incorrect and only
checks if the first and last pages are the same, where it really should
be checking if the mapped pages are contigous. This allows mapping a
single normal page, or a huge page range.
Down the line we can add support for remapping pages to be virtually
contigous, which is really all that io_uring cares about.
Cc: stable@vger.kernel.org
Fixes: 03d89a2de25b ("io_uring: support for user allocated memory for rings/sqes")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It was a mistake to prefer polling based mode when setting a performance
level for a domain. Let's instead rely on the protocol to decide what is
best and thus avoid polling when possible.
Reported-by: Nikunj Kela <nkela@quicinc.com>
Fixes: 2af23ceb8624 ("pmdomain: arm: Add the SCMI performance domain")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20231127135033.136442-1-ulf.hansson@linaro.org
The debugfs files for netdevs (sdata) and links are removed
with the wiphy mutex held, which may deadlock. Use the new
wiphy locked debugfs to avoid that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The read is currently with RCU and the write can deadlock,
convert both for the sake of illustration.
Make mac80211 depend on cfg80211 debugfs to get the helpers,
but mac80211 debugfs without it does nothing anyway. This
also required some adjustments in ath9k.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add wrappers for debugfs files that should be called with
the wiphy mutex held, while the file is also to be removed
under the wiphy mutex. This could otherwise deadlock when
a file is trying to acquire the wiphy mutex while the code
removing it holds the mutex but waits for the removal.
This actually works by pushing the execution of the read
or write handler to a wiphy work that can be cancelled
using the debugfs cancellation API.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In some cases there might be longer-running hardware accesses
in debugfs files, or attempts to acquire locks, and we want
to still be able to quickly remove the files.
Introduce a cancellations API to use inside the debugfs handler
functions to be able to cancel such operations on a per-file
basis.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When you take a lock in a debugfs handler but also try
to remove the debugfs file under that lock, things can
deadlock since the removal has to wait for all users
to finish.
Add lockdep annotations in debugfs_file_get()/_put()
to catch such issues.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
debugfs_create_automount() stores a function pointer in d_fsdata,
but since commit 7c8d469877b1 ("debugfs: add support for more
elaborate ->d_fsdata") debugfs_release_dentry() will free it, now
conditionally on DEBUGFS_FSDATA_IS_REAL_FOPS_BIT, but that's not
set for the function pointer in automount. As a result, removing
an automount dentry would attempt to free the function pointer.
Luckily, the only user of this (tracing) never removes it.
Nevertheless, it's safer if we just handle the fsdata in one way,
namely either DEBUGFS_FSDATA_IS_REAL_FOPS_BIT or allocated. Thus,
change the automount to allocate it, and use the real_fops in the
data to indicate whether or not automount is filled, rather than
adding a type tag. At least for now this isn't actually needed,
but the next changes will require it.
Also check in debugfs_file_get() that it gets only called
on regular files, just to make things clearer.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix the following warning:
drivers/iommu/intel/iommu.c:302:30: warning: symbol
'intel_dirty_ops' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
Fixes: f35f22cc760e ("iommu/vt-d: Access/Dirty bit support for SS domains")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20231120101025.1103404-1-chentao@kylinos.cn
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 6bbd42e2df8f ("mmu_notifiers: call invalidate_range() when
invalidating TLBs") moved the secondary TLB invalidations into the TLB
invalidation functions to ensure that all secondary TLB invalidations
happen at the same time as the CPU invalidation and added a flush-all
type of secondary TLB invalidation for the batched mode, where a range
of [0, -1UL) is used to indicates that the range extends to the end of
the address space.
However, using an end address of -1UL caused an overflow in the Intel
IOMMU driver, where the end address was rounded up to the next page.
As a result, both the IOTLB and device ATC were not invalidated correctly.
Add a flush all helper function and call it when the invalidation range
is from 0 to -1UL, ensuring that the entire caches are invalidated
correctly.
Fixes: 6bbd42e2df8f ("mmu_notifiers: call invalidate_range() when invalidating TLBs")
Cc: stable@vger.kernel.org
Cc: Huang Ying <ying.huang@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Tested-by: Luo Yuzhang <yuzhang.luo@intel.com> # QAT
Tested-by: Tony Zhu <tony.zhu@intel.com> # DSA
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20231117090933.75267-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The VT-d spec requires (10.4.4 Global Command Register, TE field) that:
Hardware implementations supporting DMA draining must drain any in-flight
DMA read/write requests queued within the Root-Complex before switching
address translation on or off and reflecting the status of the command
through the TES field in the Global Status register.
Unfortunately, some integrated graphic devices fail to do so after some
kind of power state transition. As the result, the system might stuck in
iommu_disable_translation(), waiting for the completion of TE transition.
Add MTL to the quirk list for those devices and skips TE disabling if the
qurik hits.
Fixes: b1012ca8dc4f ("iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu")
Cc: stable@vger.kernel.org
Signed-off-by: Abdul Halim, Mohd Syazwan <mohd.syazwan.abdul.halim@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20231116022324.30120-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the iommu probe_device path, domain_context_mapping() allows setting
up the context entry for a non-PCI device. However, in the iommu
release_device path, domain_context_clear() only clears context entries
for PCI devices.
Make domain_context_clear() behave consistently with
domain_context_mapping() by clearing context entries for both PCI and
non-PCI devices.
Fixes: 579305f75d34 ("iommu/vt-d: Update to use PCI DMA aliases")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20231114011036.70142-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When IOMMU hardware operates in legacy mode, the TT field of the context
entry determines the translation type, with three supported types (Section
9.3 Context Entry):
- DMA translation without device TLB support
- DMA translation with device TLB support
- Passthrough mode with translated and translation requests blocked
Device TLB support is absent when hardware is configured in passthrough
mode.
Disable the PCI ATS feature when IOMMU is configured for passthrough
translation type in legacy (non-scalable) mode.
Fixes: 0faa19a1515f ("iommu/vt-d: Decouple PASID & PRI enabling from SVA")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20231114011036.70142-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The latest VT-d spec indicates that when remapping hardware is disabled
(TES=0 in Global Status Register), upstream ATS Invalidation Completion
requests are treated as UR (Unsupported Request).
Consequently, the spec recommends in section 4.3 Handling of Device-TLB
Invalidations that software refrain from submitting any Device-TLB
invalidation requests when address remapping hardware is disabled.
Verify address remapping hardware is enabled prior to submitting Device-
TLB invalidation requests.
Fixes: 792fb43ce2c9 ("iommu/vt-d: Enable Intel IOMMU scalable mode by default")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20231114011036.70142-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The enforce_cache_coherency callback ensures DMA cache coherency for
devices attached to the domain.
Intel IOMMU supports enforced DMA cache coherency when the Snoop
Control bit in the IOMMU's extended capability register is set.
Supporting it differs between legacy and scalable modes.
In legacy mode, it's supported page-level by setting the SNP field
in second-stage page-table entries. In scalable mode, it's supported
in PASID-table granularity by setting the PGSNP field in PASID-table
entries.
In legacy mode, mappings before attaching to a device have SNP
fields cleared, while mappings after the callback have them set.
This means partial DMAs are cache coherent while others are not.
One possible fix is replaying mappings and flipping SNP bits when
attaching a domain to a device. But this seems to be over-engineered,
given that all real use cases just attach an empty domain to a device.
To meet practical needs while reducing mode differences, only support
enforce_cache_coherency on a domain without mappings if SNP field is
used.
Fixes: fc0051cb9590 ("iommu/vt-d: Check domain force_snooping against attached devices")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20231114011036.70142-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It turns out there are more subtle races beyond just the main part of
__iommu_probe_device() itself running in parallel - the dev_iommu_free()
on the way out of an unsuccessful probe can still manage to trip up
concurrent accesses to a device's fwspec. Thus, extend the scope of
iommu_probe_device_lock() to also serialise fwspec creation and initial
retrieval.
Reported-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Link: https://lore.kernel.org/linux-iommu/e2e20e1c-6450-4ac5-9804-b0000acdf7de@quicinc.com/
Fixes: 01657bc14a39 ("iommu: Avoid races around device probe")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Tested-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/16f433658661d7cadfea51e7c65da95826112a2b.1700071477.git.robin.murphy@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For historical reasons the 'QUALCOMM IOMMU' entry lists only one
Qualcomm IOMMU driver. However there are also the historical MSM IOMMU
driver, which is used for old 32-bit platforms, and the
Qualcomm-specific customisations for the generic ARM SMMU driver. List
all these files under the QUALCOMM IOMMU entry.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231103225413.1479857-1-dmitry.baryshkov@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Most of the calling code now has error handling that can carry an error
code further up the call chain. Keep the exported interface
iommu_domain_alloc() returning NULL and reflow the internal code to use
ERR_PTR not NULL for domain allocation failure.
Optionally allow drivers to return ERR_PTR from any of the alloc ops. Many
of the new ops (user, sva, etc) already return ERR_PTR, so having two
rules is confusing and hard on drivers. This fixes a bug in DART that was
returning ERR_PTR.
Fixes: 482feb5c6492 ("iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/linux-iommu/b85e0715-3224-4f45-ad6b-ebb9f08c015d@moroto.mountain/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/0-v2-55ae413017b8+97-domain_alloc_err_ptr_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
