The out of tree IPU6 driver comes with its own copy of the ipu-bridge code.
It also comes bundled with standard v4l2 sensor drivers. Many of these have
been mainlined and the rest is being mainlined but not all are upstream
yet.
The latest version of the out of tree code now will use the mainline kernel
ipu-bridge version when build against new enough kernels.
This however breaks support for (bundled) sensor drivers which do not (yet)
have an entry in the mainline ipu-bridge code.
Add the missing entries to the mainline ipu-bridge code to make
the transition to having everything in mainline easier.
The alternative HID for the OV13B10 and the OV08x40 entries both are for
sensors already supported in mainline which were missing.
The downside of adding these HIDs is that this will cause the IPU3 / IPU6
drivers to delay registering there /dev/video# nodes until a sensor driver
has bound, which for the non mainline drivers may never happen. This is
not really an issue because almost all IPU designs only have front (user)
facing sensors and all the added HIDs are for the main RGB (not IR) sensor.
So if the sensor driver is missing then the user can already not use
the camera and adding these HIDs does not really change that.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Sort the sensors in ipu_supported_sensors[] by ACPI HID rather then having
them in some random order.
While at it also use the correct (same as datasheet) capitalization
for the sensor names in the comments. Instead of sometimes writing
OV#### and sometimes ov####.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Into alvium cameras REG_BCRM_GAIN_RW control the analog gain.
Let's use the right V4L2_CID_ANALOGUE_GAIN ctrl.
Fixes: 0a7af872915e ("media: i2c: Add support for alvium camera")
Cc: stable@vger.kernel.org
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Implement the enum_frame_size pad operation.
The sensor supports a continuous size range of resolutions.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Alvium camera by default is in free running mode. Datasheet say that
acquisition frame rate reg can only be used if frame start trigger
mode is set to off.
Enable r/w acquisition frame rate and turn off trigger mode.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
[Sakari Ailus: Fix spelling of "acquisition".]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acquisition frame rate enable reg have a very long name let's reduce this
with an abbreviation.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
[Sakari Ailus: Fix spelling of "acquisition".]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Instead of reading device_fw reg as multiple regs let's read the entire
64bit reg using one i2c read and use bit masks and bit shifts to get fw
info.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The privacy status is maintained by privacy_ctrl, on which all
of the privacy status changes will go through, so there is no
point in maintaining one more element any more.
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Prior to the ongoing command privacy is on, it would return -1 to
indicate the current privacy status, and the ongoing command would
be well executed by firmware as well, so this is not error. This
patch changes its behavior to notify privacy on directly by V4L2
privacy control instead of reporting error.
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Cc: stable@vger.kernel.org # for 6.6 and later
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There're possibilities that privacy status change notification happens
in the middle of the ongoing mei command which already takes the command
lock, but v4l2_ctrl_s_ctrl() would also need the same lock prior to this
patch, so this may results in circular locking problem. This patch adds
one dedicated lock for v4l2 control handler to avoid described issue.
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Cc: stable@vger.kernel.org # for 6.6 and later
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
clang 19 complains about the missing parameter name. Let's add it.
drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-debugfs.h:19:62: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406050908.1kL1C69p-lkp@intel.com/
Fixes: e22b4973ee20 ("media: c8sectpfe: Do not depend on DEBUG_FS")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/tuners/tda9887.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/radio/si470x/radio-si470x-common.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/ttpci/budget-core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/bt8xx/bt878.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/ivtv/ivtvfb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007-usb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-empress.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-go7007.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-alsa.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-dvb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mcam-core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mmp_camera.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Return value of function 'i2c_transfer' is not checked that
may cause undefined behaviour.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2cf36ac44730 ("[PATCH] v4l: 656: added support for the following cards")
Signed-off-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The CENTERED_RECTANGLE define fails to compile on clang and old gcc
versions. Just drop it and fill in the crop rectangles explicitly.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This helps validating DTS files. Introduced changes:
1. Reworded title
2. Made "bus" clock required on MT7623 as well
3. Added required #include-s and adjusted "reg" & clocks in example
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Report the average QP value of the current encoded frame via the
V4L2_CID_MPEG_VIDEO_AVERAGE_QP control, the value applies to the last
dequeued capture buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is no need to add a lock in s_ctrl callback, it has been
synchronized by the ctrl_handler's lock, otherwise it may led to
a deadlock if the driver calls v4l2_ctrl_s_ctrl().
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a control V4L2_CID_MPEG_VIDEO_AVERAGE_QP to report the average QP
value of the current encoded frame. The value applies to the last
dequeued capture buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As talked about in commit 14d3ae2efeed ("ARM: 8507/1: dma-mapping: Use
DMA_ATTR_ALLOC_SINGLE_PAGES hint to optimize alloc"), it doesn't
really make sense to try to allocate contiguous chunks of memory for
video encoding/decoding. Let's switch the Mediatek vcodec driver to
pass DMA_ATTR_ALLOC_SINGLE_PAGES and take some of the stress off the
memory subsystem.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Both 'bs_dma' and 'dma_addr' are integers. No need to convert the
type from dma_addr_t to uint64_t again.
Fixes: d353c3c34af0 ("media: mediatek: vcodec: support 36 bits physical address")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi
is valid for future use.
Fixes: 590577a4e525 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The supported decoder commands are different for stateless and
stateful architectures. Add stateless decoder commands to fix
the v4l2-compliance test error below.
Codec ioctls:
VIDIOC_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
VIDIOC_TRY_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
VIDIOC_G_ENC_INDEX returned -1 (Inappropriate ioctl for device)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
VIDIOC_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
fail: v4l2-test-codecs.cpp(126): ret
test VIDIOC_(TRY_)DECODER_CMD: FAIL
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZmHG8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGevkH/3YuG9YSP1eo93Da
eQAiwoOtxHsUWh9+2HQYrK5J1s7mCsf9+X2DtKZ3WJ4ZrtiYSvKPNwfG625JMgLb
aLKZFtu2fbijGuRyGM/9o6eZ7ZspZbVTcoCo4RAW1uTzsF8mpIFCp2gpGE7SiTfh
sdXkk3EX6DGrD0oZCu9A1uBBJ8MDB3tCQywnE7ny/X22pze6xCy7CZQWhk4EjOII
zZt8Lukhs1AjJrS9X0DXcFayQB7WB75mx7XvaiqepcXPGb0fUI2TZW5oTlGk9uXD
59KfjWe3Fn4Xp0Z83iLByjVuB+ZceZBD/1B24EqieQLVero3PLdh6B4XHKGKfDU+
C16bWqs=
=4UyN
-----END PGP SIGNATURE-----
Merge tag 'v6.10-rc3'
Linux 6.10-rc3
This is needed for the ipu6 and mei fixes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
- Update copies of kernel headers, which resulted in support for the new
'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC prctls,
fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector, 'map_shadow_stack'
syscall for x86-32.
- Revert perf.data record memory allocation optimization that ended up
causing a regression, work is being done to re-introduce it in the
next merge window.
- Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
interrupting the build.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZmWw9QAKCRCyPKLppCJ+
J/bcAP4vftSGYZ0BDlfLT7KjEUDdc03nvgd5kHAkYM1OyVNgzAD/XRBe2c1f4pUK
DWj5rjMAFpMfcGTv4TefQoopMZxYXgs=
=cFei
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Update copies of kernel headers, which resulted in support for the
new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC
prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector,
'map_shadow_stack' syscall for x86-32.
- Revert perf.data record memory allocation optimization that ended up
causing a regression, work is being done to re-introduce it in the
next merge window.
- Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
interrupting the build.
* tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL
tools headers UAPI: Update i915_drm.h with the kernel sources
tools headers UAPI: Sync kvm headers with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall
perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync linux/stat.h with the kernel sources
propagated all the way up to the module loading functions
-----BEGIN PGP SIGNATURE-----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=TDV6
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Convert PCI core error codes to proper error numbers since latter get
propagated all the way up to the module loading functions
* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Convert PCIBIOS_* return codes to errnos
EDAC/amd64: Convert PCIBIOS_* return codes to errnos
driver was registering clkdev lookups that were always going to be
useless. This wasn't a problem until clkdev started returning an error
in these cases, causing this driver to fail probe, and thus boot to fail
because clks are essential for most drivers. The fix is simple, don't
use clkdev because this is a DT based system where clkdev isn't used.
-----BEGIN PGP SIGNATURE-----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=J4Wh
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One fix for the SiFive PRCI clocks so that the device boots again.
This driver was registering clkdev lookups that were always going to
be useless. This wasn't a problem until clkdev started returning an
error in these cases, causing this driver to fail probe, and thus boot
to fail because clks are essential for most drivers. The fix is
simple, don't use clkdev because this is a DT based system where
clkdev isn't used"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sifive: Do not register clkdevs for PRCI clocks
-----BEGIN PGP SIGNATURE-----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=MpUp
-----END PGP SIGNATURE-----
Merge tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Two small smb3 client fixes:
- fix deadlock in umount
- minor cleanup due to netfs change"
* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Don't advance the I/O iterator before terminating subrequest
smb: client: fix deadlock in smb2_find_smb_tcon()
-----BEGIN PGP SIGNATURE-----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=J35N
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential read out of bounds in hid-asus (Andrew Ballance)
- fix endian-conversion on little endian systems in intel-ish-hid (Arnd
Bergmann)
- A couple of new input event codes (Aseda Aboagye)
- errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
(Christophe JAILLET), hid-logitech-dj (José Expósito)
- current leakage fix while the device is in suspend on a i2c-hid
laptop (Johan Hovold)
- other assorted smaller fixes and device ID / quirk entry additions
* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Ignore battery for ELAN touchscreens 2F2C and 4116
HID: i2c-hid: elan: fix reset suspend current leakage
dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
input: Add support for "Do Not Disturb"
input: Add event code for accessibility key
hid: asus: asus_report_fixup: fix potential read out of bounds
HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
HID: intel-ish-hid: fix endian-conversion
HID: nintendo: Fix an error handling path in nintendo_hid_probe()
HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
HID: core: remove unnecessary WARN_ON() in implement()
HID: nvidia-shield: Add missing check for input_ff_create_memless
HID: intel-ish-hid: Fix build error for COMPILE_TEST
- Fix the initial state of the save button in 'make gconfig'
- Improve the Kconfig documentation
- Fix a Kconfig bug regarding property visibility
- Fix build breakage for systems where 'sed' is not installed in /bin
- Fix a false warning about missing MODULE_DESCRIPTION()
-----BEGIN PGP SIGNATURE-----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=RzRM
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix the initial state of the save button in 'make gconfig'
- Improve the Kconfig documentation
- Fix a Kconfig bug regarding property visibility
- Fix build breakage for systems where 'sed' is not installed in /bin
- Fix a false warning about missing MODULE_DESCRIPTION()
* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
kconfig: remove wrong expr_trans_bool()
kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
kconfig: doc: fix a typo in the note about 'imply'
kconfig: gconf: give a proper initial state to the Save button
kconfig: remove unneeded code for user-supplied values being out of range
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmZi4D8ACgkQCF8+vY7k
4RXFYxAAnyyNn2GxGkc9tBbUMUC9O2GV8TYMDNcaUoD94dWQ4oMCH3ExdxjDAKEP
+fR+ytKwbmb7/og0X5o0MTyJD4ttRkiAJwMNSoF+2Da8+KJhrHQOx9NL8Kpg3J/B
ZsKtzEyVmxWx7+FwSA50hv1g0GdEtOS7F0fxgZYwt0tpZyYorW46DthqipA7N8Yl
S50bV9rWy1n3Tt8XqVKqmZd0e77FpR8p6D899mLFxm3Q0NPkjtvmescamsmWpkzG
r+KKeXqPOSCSPa/zRq+JMYXIeIXaK7akW9FQY+XWmP2nwWuwFb1EQXtlRVuatLK7
P6PggXMzq1wP0+rGizooAFV79gaMb/HP00v9qGeaEdr3R502wLeRSbbQsnfL3ENe
oaZ01ckms/dAYH8ph2trwS2ViUnfICiuV684VHVQJGZEsV74mVL5YyNmWftnRaJz
xhtDptaTp0aICC36sqRg9CixU/ATPPuLoDpphgEQ/DAcEJphrSzXHZcZub1gAnMY
RIECNp6YnLh7YwwRRaxgLE+n3xnppelyArKWbG498dOl/T5ccUvbKbfLWq9YDaPY
JG3CZveYDr9FMCOQZuEROSMTFFpoyInBRUSUlROskRNp/+rPdkX3UrsQmvH+9+cb
OspJZEkIPiFJZOfUP+PaUz24hpwSViABjeERHHVFmShZqXIG+zk=
=4Zki
-----END PGP SIGNATURE-----
Merge tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fixes for the new ipu6 driver (and related fixes to mei csi driver)
- fix a double debugfs remove logic at mgb4 driver
- a documentation fix
* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: intel/ipu6: add csi2 port sanity check in notifier bound
media: intel/ipu6: update the maximum supported csi2 port number to 6
media: mei: csi: Warn less verbosely of a missing device fwnode
media: mei: csi: Put the IPU device reference
media: intel/ipu6: fix the buffer flags caused by wrong parentheses
media: intel/ipu6: Fix an error handling path in isys_probe()
media: intel/ipu6: Move isys_remove() close to isys_probe()
media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
media: Documentation: v4l: Fix ACTIVE route flag
media: mgb4: Fix double debugfs remove
that can result in missed wakeups and hung tasks.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=uVD+
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix race between perf_event_free_task() and perf_event_release_kernel()
that can result in missed wakeups and hung tasks"
* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix missing wakeup when waiting for context reference
All except the nilfs2 fix affect MM and all are singletons - see the
chagelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZmOJLgAKCRDdBJ7gKXxA
jinQAQC0AjAhN7zuxfCb9ljCsqyyAfsWbeyXAlqdhuRt2xZONgD+Nv2XwSUw0ZUv
xHGgPodMCrmEvuLo048qRpdJRbYo8gw=
=sM9B
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"14 hotfixes, 6 of which are cc:stable.
All except the nilfs2 fix affect MM and all are singletons - see the
chagelogs for details"
* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
mm: fix xyz_noprof functions calling profiled functions
codetag: avoid race at alloc_slab_obj_exts
mm/hugetlb: do not call vma_add_reservation upon ENOMEM
mm/ksm: fix ksm_zero_pages accounting
mm/ksm: fix ksm_pages_scanned accounting
kmsan: do not wipe out origin when doing partial unpoisoning
vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
mm: page_alloc: fix highatomic typing in multi-block buddies
nilfs2: fix potential kernel bug due to lack of writeback flag waiting
memcg: remove the lockdep assert from __mod_objcg_mlstate()
mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
mm: drop the 'anon_' prefix for swap-out mTHP counters
- set of interrupt handling and Kconfig fixes for gpio-tqmx86
- add a buffer for storing output values in gpio-tqmx86 as reading back the
registers always returns the input values
- add missing MODULE_DESCRIPTION()s to several GPIO drivers
-----BEGIN PGP SIGNATURE-----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=FanA
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- interrupt handling and Kconfig fixes for gpio-tqmx86
- add a buffer for storing output values in gpio-tqmx86 as reading back
the registers always returns the input values
- add missing MODULE_DESCRIPTION()s to several GPIO drivers
* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: add missing MODULE_DESCRIPTION() macros
gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
gpio: tqmx86: store IRQ trigger type and unmask status separately
gpio: tqmx86: introduce shadow register for GPIO output value
gpio: tqmx86: fix typo in Kconfig label
-----BEGIN PGP SIGNATURE-----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=GLKM
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix a locking order issue with setting max async thread workers
(Hagar)
- Fix for a NULL pointer dereference for failed async flagged requests
using ring provided buffers. This doesn't affect the current kernel,
but it does affect older kernels, and is being queued up for 6.10
just to make the stable process easier (me)
- Fix for NAPI timeout calculations for how long to busy poll, and
subsequently how much to sleep post that if a wait timeout is passed
in (me)
- Fix for a regression in this release cycle, where we could end up
using a partially unitialized match value for io-wq (Su)
* tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux:
io_uring: fix possible deadlock in io_register_iowq_max_workers()
io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()
io_uring/napi: fix timeout calculation
io_uring: check for non-NULL file pointer in io_file_can_poll()
-----BEGIN PGP SIGNATURE-----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=7rUb
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix handling of folio private changes.
The private value holds pointer to our extent buffer structure
representing a metadata range. Release and create of the range was
not properly synchronized when updating the private bit which ended
up in double folio_put, leading to all sorts of breakage
- fix a crash, reported as duplicate key in metadata, but caused by a
race of fsync and size extending write. Requires prealloc target
range + fsync and other conditions (log tree state, timing)
- fix leak of qgroup extent records after transaction abort
* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: protect folio::private when attaching extent buffer folios
btrfs: fix leak of qgroup extent records after transaction abort
btrfs: fix crash on racing fsync and size-extending write into prealloc
- Fix an occasional memory overwrite caused by a fix added in 6.10
-----BEGIN PGP SIGNATURE-----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=NvAo
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix an occasional memory overwrite caused by a fix added in 6.10
* tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix loop termination condition in gss_free_in_token_pages()
* Another fix to avoid allocating pages that overlap with ERR_PTR, which
manifests on rv32.
* A revert for the badaccess patch I incorrectly picked up an early
version of.
-----BEGIN PGP SIGNATURE-----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=tO1B
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Another fix to avoid allocating pages that overlap with ERR_PTR,
which manifests on rv32
- A revert for the badaccess patch I incorrectly picked up an early
version of
* tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Revert "riscv: mm: accelerate pagefault when badaccess"
riscv: fix overlap of allocated page and PTR_ERR
- Do not create PT_LOAD program header for the kenel image when
the virtual memory informaton in OS_INFO data is not available.
That fixes stand-alone dump failures against kernels that do not
provide the virtual memory informaton
- Add KVM s390 shared zeropage selftest
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZmMO4xccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8ErcAQDLfDjQsjL3pJOaCuRqK2KyCgnD
azZSDzjKZ/C03MX/vgEA505txGFI5UthiVRHLR/GEZs6E7q+C5fuHexFPbG1XQg=
=dIuv
-----END PGP SIGNATURE-----
Merge tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Do not create PT_LOAD program header for the kenel image when the
virtual memory informaton in OS_INFO data is not available. That
fixes stand-alone dump failures against kernels that do not provide
the virtual memory informaton
- Add KVM s390 shared zeropage selftest
* tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
KVM: s390x: selftests: Add shared zeropage test
s390/crash: Do not use VM info if os_info does not have it