The out of tree IPU6 driver comes with its own copy of the ipu-bridge code.
It also comes bundled with standard v4l2 sensor drivers. Many of these have
been mainlined and the rest is being mainlined but not all are upstream
yet.
The latest version of the out of tree code now will use the mainline kernel
ipu-bridge version when build against new enough kernels.
This however breaks support for (bundled) sensor drivers which do not (yet)
have an entry in the mainline ipu-bridge code.
Add the missing entries to the mainline ipu-bridge code to make
the transition to having everything in mainline easier.
The alternative HID for the OV13B10 and the OV08x40 entries both are for
sensors already supported in mainline which were missing.
The downside of adding these HIDs is that this will cause the IPU3 / IPU6
drivers to delay registering there /dev/video# nodes until a sensor driver
has bound, which for the non mainline drivers may never happen. This is
not really an issue because almost all IPU designs only have front (user)
facing sensors and all the added HIDs are for the main RGB (not IR) sensor.
So if the sensor driver is missing then the user can already not use
the camera and adding these HIDs does not really change that.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Sort the sensors in ipu_supported_sensors[] by ACPI HID rather then having
them in some random order.
While at it also use the correct (same as datasheet) capitalization
for the sensor names in the comments. Instead of sometimes writing
OV#### and sometimes ov####.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Into alvium cameras REG_BCRM_GAIN_RW control the analog gain.
Let's use the right V4L2_CID_ANALOGUE_GAIN ctrl.
Fixes: 0a7af872915e ("media: i2c: Add support for alvium camera")
Cc: stable@vger.kernel.org
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Implement the enum_frame_size pad operation.
The sensor supports a continuous size range of resolutions.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Alvium camera by default is in free running mode. Datasheet say that
acquisition frame rate reg can only be used if frame start trigger
mode is set to off.
Enable r/w acquisition frame rate and turn off trigger mode.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
[Sakari Ailus: Fix spelling of "acquisition".]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acquisition frame rate enable reg have a very long name let's reduce this
with an abbreviation.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
[Sakari Ailus: Fix spelling of "acquisition".]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Instead of reading device_fw reg as multiple regs let's read the entire
64bit reg using one i2c read and use bit masks and bit shifts to get fw
info.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The privacy status is maintained by privacy_ctrl, on which all
of the privacy status changes will go through, so there is no
point in maintaining one more element any more.
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Prior to the ongoing command privacy is on, it would return -1 to
indicate the current privacy status, and the ongoing command would
be well executed by firmware as well, so this is not error. This
patch changes its behavior to notify privacy on directly by V4L2
privacy control instead of reporting error.
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Cc: stable@vger.kernel.org # for 6.6 and later
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There're possibilities that privacy status change notification happens
in the middle of the ongoing mei command which already takes the command
lock, but v4l2_ctrl_s_ctrl() would also need the same lock prior to this
patch, so this may results in circular locking problem. This patch adds
one dedicated lock for v4l2 control handler to avoid described issue.
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Cc: stable@vger.kernel.org # for 6.6 and later
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
clang 19 complains about the missing parameter name. Let's add it.
drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-debugfs.h:19:62: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406050908.1kL1C69p-lkp@intel.com/
Fixes: e22b4973ee20 ("media: c8sectpfe: Do not depend on DEBUG_FS")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/tuners/tda9887.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/radio/si470x/radio-si470x-common.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/ttpci/budget-core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/bt8xx/bt878.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/ivtv/ivtvfb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007-usb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-empress.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-go7007.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-alsa.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-dvb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mcam-core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mmp_camera.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Return value of function 'i2c_transfer' is not checked that
may cause undefined behaviour.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2cf36ac44730 ("[PATCH] v4l: 656: added support for the following cards")
Signed-off-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The CENTERED_RECTANGLE define fails to compile on clang and old gcc
versions. Just drop it and fill in the crop rectangles explicitly.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Report the average QP value of the current encoded frame via the
V4L2_CID_MPEG_VIDEO_AVERAGE_QP control, the value applies to the last
dequeued capture buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is no need to add a lock in s_ctrl callback, it has been
synchronized by the ctrl_handler's lock, otherwise it may led to
a deadlock if the driver calls v4l2_ctrl_s_ctrl().
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a control V4L2_CID_MPEG_VIDEO_AVERAGE_QP to report the average QP
value of the current encoded frame. The value applies to the last
dequeued capture buffer.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As talked about in commit 14d3ae2efeed ("ARM: 8507/1: dma-mapping: Use
DMA_ATTR_ALLOC_SINGLE_PAGES hint to optimize alloc"), it doesn't
really make sense to try to allocate contiguous chunks of memory for
video encoding/decoding. Let's switch the Mediatek vcodec driver to
pass DMA_ATTR_ALLOC_SINGLE_PAGES and take some of the stress off the
memory subsystem.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Both 'bs_dma' and 'dma_addr' are integers. No need to convert the
type from dma_addr_t to uint64_t again.
Fixes: d353c3c34af0 ("media: mediatek: vcodec: support 36 bits physical address")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi
is valid for future use.
Fixes: 590577a4e525 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The supported decoder commands are different for stateless and
stateful architectures. Add stateless decoder commands to fix
the v4l2-compliance test error below.
Codec ioctls:
VIDIOC_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
VIDIOC_TRY_ENCODER_CMD returned -1 (Inappropriate ioctl for device)
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
VIDIOC_G_ENC_INDEX returned -1 (Inappropriate ioctl for device)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
VIDIOC_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument)
fail: v4l2-test-codecs.cpp(126): ret
test VIDIOC_(TRY_)DECODER_CMD: FAIL
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZmHG8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGevkH/3YuG9YSP1eo93Da
eQAiwoOtxHsUWh9+2HQYrK5J1s7mCsf9+X2DtKZ3WJ4ZrtiYSvKPNwfG625JMgLb
aLKZFtu2fbijGuRyGM/9o6eZ7ZspZbVTcoCo4RAW1uTzsF8mpIFCp2gpGE7SiTfh
sdXkk3EX6DGrD0oZCu9A1uBBJ8MDB3tCQywnE7ny/X22pze6xCy7CZQWhk4EjOII
zZt8Lukhs1AjJrS9X0DXcFayQB7WB75mx7XvaiqepcXPGb0fUI2TZW5oTlGk9uXD
59KfjWe3Fn4Xp0Z83iLByjVuB+ZceZBD/1B24EqieQLVero3PLdh6B4XHKGKfDU+
C16bWqs=
=4UyN
-----END PGP SIGNATURE-----
Merge tag 'v6.10-rc3'
Linux 6.10-rc3
This is needed for the ipu6 and mei fixes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Drop privacy-LED GPIO control, after the privacy-LED GPIO control was added
to the ov5693 driver it was decided to model privacy-LEDs as LED class
devices and have them be controlled by the v4l2-core.
So this is dead code since on devices with privacy LEDs the led is not
a GPIO on the ov5693 fwnode, but rather is a LED class devices controlled
by the v4l2-core.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stopping the CSI source before stopping the serializer
CSI port may make the serializer not respond.
Then all the next writes to the device will fail.
max96717 1-0040: Error writing reg 0x0308: -121
max96717 1-0040: Error writing reg 0x0006: -121
Fix that by stopping the CSI receiver first and then CSI source.
Seen on max96717f revision 4.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This driver handles the MAX96714 deserializer in tunnel mode.
The CSI output will replicate all the CSI traffic forwarded by
the remote serializer.
The MAX96714 driver can handle MAX96714 and MAX96714F variants
with the same "maxim,max96714f" compatible.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
[Sakari Ailus: Adapt to changed i2c_mux_add_adapter arguments.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This driver handles the MAX96717 serializer in tunnel mode.
All incoming CSI traffic will be tunneled through the GMSL2
link.
The MAX96717 driver can handle MAX96717 and MAX96717F variants
with the same "maxim,max96717f" compatible.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
[Sakari Ailus: Adapt to changed i2c_mux_add_adapter arguments.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Several subdev state pointers are used to access the state read-only.
Mark them as const.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Always assign *val to 0 in cci_read(). This has the benefit of not
requiring initialisation of the variables data is read to using
cci_read(). Once smatch is fixed, it could catch the use of uninitialised
reads.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It's entirely normal CSR will return non-indicative values after its reset
(0). There's no need to warn the user about that.
Suggested-by: Bingbu Cao <bingbu.cao@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'i2c_reg_value' is unused since the original
commit 5a544cce2177 ("[media] adv7511: add new video encoder").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'regval_list' has been unused since
commit 398994c1e104 ("V4L/DVB (13666): tw9910: modify V/H outpit pin
setting to use VALID").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'adjust' has been unused since original
commit fbe60daac4c3 ("V4L/DVB (3916): AverMedia 6 Eyes AVS6EYES
support").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'regval_list' is unused since the original
commit 859891228e56 ("media: i2c: dw9768: Add DW9768 VCM driver")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a v4l2 subdevice driver for the Sony IMX283 image sensor.
The IMX283 is a 20MP Diagonal 15.86 mm (Type 1) CMOS Image Sensor with
Square Pixel for Color Cameras.
The following features are supported:
- Manual exposure an gain control support
- vblank/hblank/link freq control support
- Test pattern support control
- Arbitrary horizontal and vertical cropping
- Supported resolution:
- 5472x3648 @ 20fps (SRGGB12)
- 5472x3648 @ 25fps (SRGGB10)
- 2736x1824 @ 50fps (SRGGB12)
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
[Sakari Ailus: Take upstream runtime PM API changes into account.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
At the moment v4l2_subdev_s_stream_helper() only works for subdevices
that support routing. As enable/disable_streams now also works for
subdevices without routing, improve v4l2_subdev_s_stream_helper() to do
the same.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
At the moment the v4l2_subdev_enable/disable_streams() functions call
fallback helpers to handle the case where the subdev only implements
.s_stream(), and the main function handles the case where the subdev
implements streams (V4L2_SUBDEV_FL_STREAMS, which implies
.enable/disable_streams()).
What is missing is support for subdevs which do not implement streams
support, but do implement .enable/disable_streams(). Example cases of
these subdevices are single-stream cameras, where using
.enable/disable_streams() is not required but helps us remove the users
of the legacy .s_stream(), and subdevices with multiple source pads (but
single stream per pad), where .enable/disable_streams() allows the
subdevice to control the enable/disable state per pad.
The two single-streams cases (.s_stream() and .enable/disable_streams())
are very similar, and with small changes we can change the
v4l2_subdev_enable/disable_streams() functions to support all three
cases, without needing separate fallback functions.
A few potentially problematic details, though:
- For the single-streams cases we use sd->enabled_pads field, which
limits the number of pads for the subdevice to 64. For simplicity I
added the check for this limitation to the beginning of the function,
and it also applies to the streams case.
- The fallback functions only allowed the target pad to be a source pad.
It is not very clear to me why this check was needed, but it was not
needed in the streams case. However, I doubt the
v4l2_subdev_enable/disable_streams() code has ever been tested with
sink pads, so to be on the safe side, I added the same check
to the v4l2_subdev_enable/disable_streams() functions.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add two internal helper functions, v4l2_subdev_collect_streams() and
v4l2_subdev_set_streams_enabled(), which allows us to refactor
v4l2_subdev_enable/disable_streams() functions.
This (I think) makes the code a bit easier to read, and lets us more
easily add new functionality in the helper functions in the following
patch.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
We support camera privacy leds with the .s_stream() operation, in
call_s_stream(), but we don't have that support when the subdevice
implements .enable/disable_streams() operations.
Add the support by enabling the led when the first stream for a
subdevice is enabled, and disabling the led then the last stream is
disabled.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a helper function which returns whether the subdevice is streaming,
i.e. if .s_stream or .enable_streams has been called successfully.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
v4l2_subdev_enable/disable_streams_fallback() supports falling back to
.s_stream() for subdevs with a single source pad. It also tracks the
enabled streams for that one pad in the sd->enabled_streams field.
Tracking the enabled streams with sd->enabled_streams does not make
sense, as with .s_stream() there can only be a single stream per pad.
Thus, as the v4l2_subdev_enable/disable_streams_fallback() only supports
a single source pad, all we really need is a boolean which tells whether
streaming has been enabled on this pad or not.
However, as we only need a true/false state for a pad (instead of
tracking which streams have been enabled for a pad), we can easily
extend the fallback mechanism to support multiple source pads as we only
need to keep track of which pads have been enabled.
Change the sd->enabled_streams field to sd->enabled_pads, which is a
64-bit bitmask tracking the enabled source pads. With this change we can
remove the restriction that
v4l2_subdev_enable/disable_streams_fallback() only supports a single
source pad.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
call_s_stream() uses sd->enabled_streams to track whether streaming has
already been enabled. However,
v4l2_subdev_enable/disable_streams_fallback(), which was the original
user of this field, already uses it, and
v4l2_subdev_enable/disable_streams_fallback() will call call_s_stream().
This leads to a conflict as both functions set the field. Afaics, both
functions set the field to the same value, so it won't cause a runtime
bug, but it's still wrong and if we, e.g., change how
v4l2_subdev_enable/disable_streams_fallback() operates we might easily
cause bugs.
Fix this by adding a new field, 's_stream_enabled', for
call_s_stream().
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add some checks to verify that the subdev driver implements required
features.
A subdevice that supports streams (V4L2_SUBDEV_FL_STREAMS) must do one
of the following:
- Implement neither .enable/disable_streams() nor .s_stream(), if the
subdev is part of a video driver that uses an internal method to
enable the subdev.
- Implement only .enable/disable_streams(), if support for legacy
sink-side subdevices is not needed.
- Implement .enable/disable_streams() and .s_stream(), if support for
legacy sink-side subdevices is needed.
At the moment the framework doesn't check this requirement. Add the
check.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use v4l2_subdev_has_op() in v4l2_subdev_enable/disable_streams() instead
of open coding the same.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add helper functions to enable and disable the privacy led. This moves
the #if from the call site to the privacy led functions, and makes
adding privacy led support to v4l2_subdev_enable/disable_streams()
cleaner.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
