432 Commits

Author SHA1 Message Date
Wolfram Sang
24e3bb7429 Merge tag 'irq-api-2022-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into i2c/for-mergewindow
Provide a tag for maintainers to pull the generic_handle_irq_safe() API.
2022-02-23 14:14:15 +01:00
Wolfram Sang
5de7179740 i2c: qup: allow COMPILE_TEST
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.

Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-02-15 10:13:52 +01:00
Wolfram Sang
2ce4462f27 i2c: imx: allow COMPILE_TEST
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.

Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
2022-02-15 10:13:49 +01:00
Wolfram Sang
0b0dcb3882 i2c: cadence: allow COMPILE_TEST
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.

Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2022-02-15 10:13:44 +01:00
Andy Shevchenko
531310dd5d i2c: designware-pci: Switch to use i2c_new_ccgx_ucsi()
Instead of open coded variant switch to use i2c_new_ccgx_ucsi().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-02-15 10:05:07 +01:00
Andy Shevchenko
2079563d6f i2c: nvidia-gpu: Switch to use i2c_new_ccgx_ucsi()
Instead of open coded variant switch to use i2c_new_ccgx_ucsi().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-02-15 10:04:57 +01:00
Andy Shevchenko
4ebf4987c0 i2c: Introduce common module to instantiate CCGx UCSI
Introduce a common module to provide an API to instantiate UCSI device
for Cypress CCGx Type-C controller. Individual bus drivers need to select
this one on demand.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-02-15 10:04:53 +01:00
Jarkko Nikula
9c02d4011e i2c: i801: Add support for Intel Raptor Lake PCH-S
Add SMBus PCI ID on Intel Raptor Lake PCH-S.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-02-15 10:03:40 +01:00
Rafał Miłecki
d0aee048d6 i2c: brcmstb: allow compiling on BCM4908
BCM4908 SoCs use the same I2C hardware block as STB and BCM63xx devices.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-02-11 18:34:38 +01:00
Jan Dabros
78d5e9e299 i2c: designware: Add AMD PSP I2C bus support
Implement an I2C controller sharing mechanism between the host (kernel)
and PSP co-processor on some platforms equipped with AMD Cezanne SoC.

On these platforms we need to implement "software" i2c arbitration.
Default arbitration owner is PSP and kernel asks for acquire as well
as inform about release of the i2c bus via mailbox mechanism.

            +---------+
 <- ACQUIRE |         |
  +---------|   CPU   |\
  |         |         | \      +----------+  SDA
  |         +---------+  \     |          |-------
MAILBOX                   +--> |  I2C-DW  |  SCL
  |         +---------+        |          |-------
  |         |         |        +----------+
  +---------|   PSP   |
   <- ACK   |         |
            +---------+

            +---------+
 <- RELEASE |         |
  +---------|   CPU   |
  |         |         |        +----------+  SDA
  |         +---------+        |          |-------
MAILBOX                   +--> |  I2C-DW  |  SCL
  |         +---------+  /     |          |-------
  |         |         | /      +----------+
  +---------|   PSP   |/
   <- ACK   |         |
            +---------+

The solution is similar to i2c-designware-baytrail.c implementation, where
we are using a generic i2c-designware-* driver with a small "wrapper".

In contrary to baytrail semaphore implementation, beside internal
acquire_lock() and release_lock() methods we are also applying quirks to
lock_bus() and unlock_bus() global adapter methods. With this in place
all i2c clients drivers may lock i2c bus for a desired number of i2c
transactions (e.g. write-wait-read) without being aware of that such bus
is shared with another entity.

Modify i2c_dw_probe_lock_support() to select correct semaphore
implementation at runtime, since now we have more than one available.

Configure new matching ACPI ID "AMDI0019" and register
ARBITRATION_SEMAPHORE flag in order to distinguish setup with PSP
arbitration.

Add myself as a reviewer for I2C DesignWare in order to help with reviewing
and testing possible changes touching new i2c-designware-amdpsp.c module.

Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
[wsa: removed unneeded blank line and curly braces]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-02-11 15:38:23 +01:00
Linus Torvalds
112450df61 Merge branch 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "Mostly driver updates and refactorization.

  The removal of the XLR driver and the i801 refactoring stand out a
  little. In the core, we enabled async suspend/resume for I2C
  controllers and their clients. No issues were reported during the test
  phase in -next. We will see how this goes for mainline"

* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (54 commits)
  i2c: sh_mobile: remove unneeded semicolon
  i2c: riic: Use platform_get_irq() to get the interrupt
  i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  i2c: bcm2835: Use platform_get_irq() to get the interrupt
  i2c: aspeed: Remove unused includes
  dt-bindings: i2c: aspeed: Drop stray '#interrupt-cells'
  i2c: sh_mobile: update to new DMAENGINE API when terminating
  i2c: rcar: update to new DMAENGINE API when terminating
  i2c: exynos5: Fix getting the optional clock
  i2c: designware-pci: Convert to use dev_err_probe()
  i2c: designware-pci: use __maybe_unused for PM functions
  i2c: designware-pci: Group MODULE_*() macros
  i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage
  i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  i2c: designware: Do not complete i2c read without RX_FULL interrupt
  eeprom: at24: Add support for 24c1025 EEPROM
  dt-bindings: at24: add at24c1025
  i2c: tegra: use i2c_timings for bus clock freq
  dt-bindings: at24: Rework special case compatible handling
  i2c: i801: Don't clear status flags twice in interrupt mode
  ...
2022-01-14 16:19:38 +01:00
Sam Protsenko
c4bcef90cc i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
I2C controller chosen by I2C_EXYNOS5 config option is also suitable for
Exynos850 and ExynosAutoV9 SoCs. State that specifically in I2C_EXYNOS5
symbol help section.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-12-09 15:49:23 +01:00
Rob Herring
77e0164630 i2c: Remove unused Netlogic/Sigma Designs XLR driver
Commits 95b8a5e0111a ("MIPS: Remove NETLOGIC support") and edd4488aea9c
("ARM: remove tango platform") removed Netlogic XLR and Sigma Designs
Tango platforms which means there are no platforms using the XLR I2C
driver and it can be removed.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-11-23 10:00:29 +01:00
Rob Herring
ef99066c7d i2c: Remove Netlogic XLP variant
Netlogic XLP was removed in commit 95b8a5e0111a ("MIPS: Remove NETLOGIC
support"). With those gone, the single platform left to support is
Cavium ThunderX2. Remove the Netlogic variant and DT support.

For simplicity, the existing kconfig name is retained.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by George Cherian <gcherian@marvell.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-11-23 10:00:12 +01:00
Sam Protsenko
3ac5f9db26 ARM: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies
A separate Kconfig option HAVE_S3C2410_I2C for Samsung SoCs is not
really needed and the i2c-s3c24xx driver can depend on Samsung ARM
architectures instead. This also enables i2c-s3c2410 for arm64 Exynos
SoCs, which is required for example by Exynos850.

This is basically continuation of work made in following commits:
  - commit d96890fca9fd ("rtc: s3c: remove HAVE_S3C_RTC in favor of
    direct dependencies")
  - commit 7dd3cae90d85 ("ARM: samsung: remove HAVE_S3C2410_WATCHDOG and
    use direct dependencies")

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211121150558.21801-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-11-21 17:46:18 +01:00
Sven Peter
d88ae2932d i2c: pasemi: Add Apple platform driver
With all the previous preparations we can now finally add
the platform driver to support the PASemi-based controllers
in Apple SoCs. This does not work on the M1 yet but should
work on the early iPhones already.

Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-10-11 11:45:48 +02:00
Krzysztof Kozlowski
cf9ae42c43 i2c: exynos: describe drivers in KConfig
Describe better which driver applies to which SoC, to make configuring
kernel for Samsung SoC easier.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-10-02 09:32:22 +02:00
Jie Deng
3cfc883804 i2c: virtio: add a virtio i2c frontend driver
Add an I2C bus driver for virtio para-virtualization.

The controller can be emulated by the backend driver in
any device model software by following the virtio protocol.

The device specification can be found on
https://lists.oasis-open.org/archives/virtio-comment/202101/msg00008.html.

By following the specification, people may implement different
backend drivers to emulate different controllers according to
their needs.

Co-developed-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-19 21:21:19 +02:00
Lukas Bulwahn
e517992bbc i2c: remove dead PMC MSP TWI/SMBus/I2C driver
Commit 1b00767fd8e1 ("MIPS: Remove PMC MSP71xx platform") removes the
config PMC_MSP in ./arch/mips/Kconfig.

Hence, since then, the corresponding PMC MSP TWI/SMBus/I2C driver is
dead code. Remove this dead driver.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-08-17 21:17:46 +02:00
Geert Uytterhoeven
52b806e8d6 i2c: I2C_HISI should depend on ACPI
The HiSilicon Kunpeng I2C controller driver relies on ACPI to probe for
its presence.  Hence add a dependency on ACPI, to prevent asking the
user about this driver when configuring a kernel without ACPI firmware
support.

Fixes: d62fbdb99a85730a ("i2c: add support for HiSilicon I2C controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-25 21:24:50 +02:00
Linus Torvalds
592fa9532d Merge branch 'i2c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:

 - new drivers for Silicon Labs CP2615 and the HiSilicon I2C unit

 - bigger refactoring for the MPC driver

 - support for full software nodes - no need to work around with only
   properties anymore

 - we now have 'devm_i2c_add_adapter', too

 - sub-system wide fixes for the RPM refcounting problem which often
   caused a leak when an error was encountered during probe

 - the rest is usual driver updates and improvements

* 'i2c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits)
  i2c: mediatek: Use scl_int_delay_ns to compensate clock-stretching
  i2c: mediatek: Fix wrong dma sync flag
  i2c: mediatek: Fix send master code at more than 1MHz
  i2c: sh7760: fix IRQ error path
  i2c: i801: Add support for Intel Alder Lake PCH-M
  i2c: core: Fix spacing error by checkpatch
  i2c: s3c2410: simplify getting of_device_id match data
  i2c: nomadik: Fix space errors
  i2c: iop3xx: Fix coding style issues
  i2c: amd8111: Fix coding style issues
  i2c: mpc: Drop duplicate message from devm_platform_ioremap_resource()
  i2c: mpc: Use device_get_match_data() helper
  i2c: mpc: Remove CONFIG_PM_SLEEP ifdeffery
  i2c: mpc: Use devm_clk_get_optional()
  i2c: mpc: Update license and copyright
  i2c: mpc: Interrupt driven transfer
  i2c: sh7760: add IRQ check
  i2c: rcar: add IRQ check
  i2c: mlxbf: add IRQ check
  i2c: jz4780: add IRQ check
  ...
2021-04-30 13:01:02 -07:00
Linus Torvalds
c70a4be130 powerpc updates for 5.13
- Enable KFENCE for 32-bit.
 
  - Implement EBPF for 32-bit.
 
  - Convert 32-bit to do interrupt entry/exit in C.
 
  - Convert 64-bit BookE to do interrupt entry/exit in C.
 
  - Changes to our signal handling code to use user_access_begin/end() more extensively.
 
  - Add support for time namespaces (CONFIG_TIME_NS)
 
  - A series of fixes that allow us to reenable STRICT_KERNEL_RWX.
 
  - Other smaller features, fixes & cleanups.
 
 Thanks to: Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V,
   Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le Goater, Chen Huang, Chris
   Packham, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Dan Carpenter, Daniel
   Axtens, Daniel Henrique Barboza, David Gibson, Davidlohr Bueso, Denis Efremov,
   dingsenjie, Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
   Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren Myneni, He Ying,
   Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee Jones, Leonardo Bras, Li Huafei,
   Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Nathan Chancellor, Nathan
   Lynch, Nicholas Piggin, Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi
   Bangoria, Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
   Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen Rothwell, Thadeu Lima
   de Souza Cascardo, Thomas Gleixner, Tony Ambardar, Tyrel Datwyler, Vaibhav Jain,
   Vincenzo Frascino, Xiongwei Song, Yang Li, Yu Kuai, Zhang Yunkai.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmCLV1kTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgLUyD/4jrTolG4sVec211hYO+0VuJzoqN4Cf
 j2CA2Ju39butnSMiq4LJUPRB7QRZY1OofkoNFpZeDQspjfZXPz2ulpYAz+SxHWE2
 ReHPmWH1rOABlUPXFboePF4OLwmAs9eR5mN2z9HpKXbT3k78HaToLqiONyB4fVCr
 Q5TkJeRn/Y7ZJLdyPLTpczHHleQ8KoM6kT7ncXnTm6p97JOBJSrGaJ5N/8X5a4+e
 6jtgB7Pvw8jNDShSr8BDLBgBZZcmoTiuG8KfgwRZ+m+mKB1yI2X8S/a54w/lDi9g
 UcSv3jQcFLJuW+T/pYe4R330uWDYa0cwjJOtMmsJ98S4EYOevoe9fZuL97qNshme
 xtBr4q1i03G1icYOJJ8dXtvabG2rUzj8t1SCDpwYfrynzTWVRikiQYTXUBhRSFoK
 nsoklvKd2IZa485XYJ2ljSyClMy8S4yJJ9RuzZ94DTXDSJUesKuyRWGnso4mhkcl
 wvl4wwMTJvnCMKVo6dsJyV24QWfd6dABxzm04uPA94CKhG33UwK8252jXVeaohSb
 WSO7qWBONgDXQLJ0mXRcEYa9NHvFS4Jnp6APbxnHr1gS+K+PNkD4gPBf34FoyN0E
 9s27kvEYk5vr8APUclETF6+FkbGUD5bFbusjt3hYloFpAoHQ/k5pFVDsOZNPA8sW
 fDIRp05KunDojw==
 =dfKL
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Enable KFENCE for 32-bit.

 - Implement EBPF for 32-bit.

 - Convert 32-bit to do interrupt entry/exit in C.

 - Convert 64-bit BookE to do interrupt entry/exit in C.

 - Changes to our signal handling code to use user_access_begin/end()
   more extensively.

 - Add support for time namespaces (CONFIG_TIME_NS)

 - A series of fixes that allow us to reenable STRICT_KERNEL_RWX.

 - Other smaller features, fixes & cleanups.

Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le
Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M.
Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique
Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie,
Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren
Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee
Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin,
Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria,
Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen
Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar,
Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li,
Yu Kuai, and Zhang Yunkai.

* tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits)
  powerpc/signal32: Fix erroneous SIGSEGV on RT signal return
  powerpc: Avoid clang uninitialized warning in __get_user_size_allowed
  powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe
  powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n
  powerpc/kasan: Fix shadow start address with modules
  powerpc/kernel/iommu: Use largepool as a last resort when !largealloc
  powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs
  powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants"
  powerpc/iommu: Annotate nested lock for lockdep
  powerpc/iommu: Do not immediately panic when failed IOMMU table allocation
  powerpc/iommu: Allocate it_map by vmalloc
  selftests/powerpc: remove unneeded semicolon
  powerpc/64s: remove unneeded semicolon
  powerpc/eeh: remove unneeded semicolon
  powerpc/selftests: Add selftest to test concurrent perf/ptrace events
  powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR
  powerpc/selftests/perf-hwbreak: Coalesce event creation code
  powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR
  powerpc/configs: Add IBMVNIC to some 64-bit configs
  selftests/powerpc: Add uaccess flush test
  ...
2021-04-30 12:22:28 -07:00
Yicong Yang
d62fbdb99a i2c: add support for HiSilicon I2C controller
Add HiSilicon I2C controller driver for the Kunpeng SoC. It provides
the access to the i2c busses, which connects to the eeprom, rtc, etc.

The driver works with IRQ mode, and supports basic I2C features and 10bit
address. The DMA is not supported.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-10 21:54:05 +02:00
Bence Csókás
4a7695429e i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge
Create an i2c_adapter for CP2615's I2C master interface

Signed-off-by: Bence Csókás <bence98@sch.bme.hu>
[wsa: switched to '__packed', added some 'static' and an include]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-05 23:00:18 +02:00
Christophe Leroy
a329ddd472 powerpc/embedded6xx: Remove CONFIG_MV64X60
Commit 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support")
moved the last selector of CONFIG_MV64X60.

As it is not a user selectable config, it can be removed.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/19e57d16692dcd1ca67ba880d7273a57fab416aa.1616085654.git.christophe.leroy@csgroup.eu
2021-03-29 13:22:17 +11:00
Krzysztof Kozlowski
823829dc18 i2c: altera: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs
ARCH_SOCFPGA is being renamed to ARCH_INTEL_SOCFPGA so adjust the
32-bit ARM drivers to rely on new symbol.

The side effect is that the I2C_ALTERA will now be available for both
32-bit and 64-bit Intel SoCFPGA, even though it is used only for 32-bit.

Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23 11:03:36 -05:00
Linus Torvalds
32c080c4b5 Merge branch 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:

 - mostly driver updates. Bigger ones for mlxcpld and iproc. But most of
   them are all over the place.

 - removal of the efm32, sirf, u300, and zte zx bus drivers because of
   platform removal. So, we have a pleasant diffstat this time.

 - first set of cleanups in the I2C core as preparation to increase
   maximum length of SMBus transfers to 255 (as specified in the new
   standard). Better documentation of struct i2c_msg and its flags stand
   out here.

 - the testunit can now respond to SMBus block process calls which is
   the testcase when implementing the above new maximum length.

* 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (62 commits)
  i2c: remove redundant error print in stm32f7_i2c_probe
  i2c: testunit: add support for block process calls
  i2c: busses: Replace spin_lock_irqsave with spin_lock in hard IRQ
  dt-bindings: eeprom: at24: Document ROHM BR24G01
  i2c: i801: Add support for Intel Alder Lake PCH-P
  i2c: mv64xxx: Fix check for missing clock after adding RPM
  i2c: mux: mlxcpld: Add callback to notify mux creation completion
  i2c: mux: mlxcpld: Extend supported mux number
  i2c: mux: mlxcpld: Extend driver to support word address space devices
  i2c: mux: mlxcpld: Get rid of adapter numbers enforcement
  i2c: mux: mlxcpld: Prepare mux selection infrastructure for two-byte support
  i2c: mux: mlxcpld: Convert driver to platform driver
  i2c: imx: Synthesize end of transaction events without idle interrupts
  i2c: i2c-qcom-geni: Add shutdown callback for i2c
  i2c: mv64xxx: Add runtime PM support
  i2c: amd-mp2: Remove unused macro
  i2c: amd-mp2: convert to PCI logging functions
  i2c: mux: mlxcpld: Move header file out of x86 realm
  platform/x86: mlxcpld: Update module license
  i2c: mux: mlxcpld: Update module license
  ...
2021-02-22 09:02:24 -08:00
Linus Torvalds
584ce3c9b4 SoC platform removal
There are a lot of platforms that have not seen any interesting code
 changes in the past five years or more.
 
 I made a list and asked around which ones are no longer in use [1], and
 received confirmation about six ARM platforms and the TI C6x architecture
 that have all reached the end of their life upstream, with no known
 users remaining:
 
  - efm32 -- added in 2011, first Cortex-M, no notable changes after 2013
  - picoxcell -- added in 2011, abandoned after 2012 acquisition
  - prima2 -- added in 20111, no notable changes since 2015
  - tango -- added in 2015, sporadic changes until 2017, but abandoned
  - u300 -- added in 2009, no notable changes since 2013
  - zx --added in 2015 for both 32, 2017 for 64 bit, no notable changes
  - arch/c6x -- added in 2011, but work stalled soon after that
 
 A number of other platforms on the original list turned out to still
 have users. In some cases there are out-of-tree patches and users
 that plan to contribute them in the future, in other cases the code
 is complete and works reliably.
 
 [1] https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmApiR8ACgkQYKtH/8kJ
 Uifl7A//RZVyxUSlbD/StS6oEOmkZH8j0L7yeYOKkSHGZI+6Dqxo6rooKymbeflk
 jJvDVQqLcrclT/7rWsKesdN8aW+ilfWrby5nDsWivsROrTw3DdvZgkjh7KYz7tA/
 OxygKQu4W9I+ywJltR4ykTUxXohjU+duHPuZJawQk64xE3Q0MWxJlQQ2kHJYVJRu
 /rWgNDQaI2d8HFhhEVsn4PC0RLWfUuBevKEuRYqZwM/oB/HuYjY+uTUGe2RhlgWb
 sbcoD93JP2MghSypq33/UtEl4Uk7Wpdv2bshTTv8DL5ToltY7wD8qIIh+aSJk9hP
 0FG3NTia7e9dqQQR2bskspGxP73iIuSN1exAbm/Ten5sysy6IsESmzqZRxXv+7Z1
 q1Oyc4wYaotJPAxMOE00RMLiRa5domI8V6Y10I5uyOcmpRvwWK2WfCOE7D3WSQ5M
 i1JiqLnC5JtJ0vyVBeRKo99zZImeXXrmS0n+fcARGtcKwAqKSvKxFcLTmkj3KqHv
 L4Xgy5f83QrMZWmldX7IiwWjTar2geBM7pFgG/z3R6JqkaxWiDHxyok6j1WUCE7b
 MViRZ8wT7JC5sIkHuwXZ4jvAXPqHq6J1rmJreU6N/jzmv/PTQoUnQ3C/MbDNhuv8
 NDVSRgrPcd/T0BrBkzIWk3t+Oh6ikDgflWsWkqIRFG0vCNx+KdM=
 =pf3b
 -----END PGP SIGNATURE-----

Merge tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform removals from Arnd Bergmann:
 "There are a lot of platforms that have not seen any interesting code
  changes in the past five years or more.

  I made a list and asked around which ones are no longer in use, and
  received confirmation about six ARM platforms and the TI C6x
  architecture that have all reached the end of their life upstream,
  with no known users remaining:

   - efm32 - added in 2011, first Cortex-M, no notable changes after 2013

   - picoxcell - added in 2011, abandoned after 2012 acquisition

   - prima2 - added in 20111, no notable changes since 2015

   - tango - added in 2015, sporadic changes until 2017, but abandoned

   - u300 - added in 2009, no notable changes since 2013

   - zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes

   - arch/c6x - added in 2011, but work stalled soon after that

  A number of other platforms on the original list turned out to still
  have users. In some cases there are out-of-tree patches and users that
  plan to contribute them in the future, in other cases the code is
  complete and works reliably"

Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/

* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: remove u300 platform
  ARM: remove tango platform
  ARM: remove zte zx platform
  ARM: remove sirf prima2/atlas platforms
  c6x: remove architecture
  MAINTAINERS: Remove deleted platform efm32
  ARM: drop efm32 platform
  ARM: Remove PicoXcell platform support
  ARM: dts: Remove PicoXcell platforms
2021-02-20 18:16:30 -08:00
Wolfram Sang
2e7f3db5d8 Linux 5.11-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmAOFRIeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG4lcH/jFAG+AXR6T2K3dG
 adJmdAWQKdDj71Ruoyefx5GSbD0B+rM1UcxOQgmZem2127RJgfDBBVYyjSwh7H1F
 LRJdN6+NKReL2OW/HMnufvpVMvWICTWHInyvsqKqp+Yo4GC5z46OtsmzSayYgTaP
 v2G9auC/rSUlzmQux9EAbTKDeNGMum3dt2rfsmnIDymBSHoPbizXF93/2hoo9jwx
 BZQCq0nYBCa9pEdsmgvqKkb/Y5+CSFoe02qdUZFIuwh6qd/XPfeDPSu4O3z4J9g6
 x8G+f7doeU0nzsAP+K0lG7ulAygxRHm5Bn2rwVdlYfihAuPNyF+Ua3duxBvjOBEY
 7w/UQ64=
 =ZWS9
 -----END PGP SIGNATURE-----

Merge tag 'v5.11-rc5' into i2c/for-5.12

Linux 5.11-rc5
2021-01-28 10:03:25 +01:00
Arnd Bergmann
73cc584cfc i2c: remove zte zx bus driver
The zte zx platform is getting removed, so this driver is no
longer needed.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-28 09:46:01 +01:00
Krzysztof Kozlowski
9ecd1d2b30 i2c: sprd: depend on COMMON_CLK to fix compile tests
The I2C_SPRD uses Common Clock Framework thus it cannot be built on
platforms without it (e.g. compile test on MIPS with LANTIQ):

    /usr/bin/mips-linux-gnu-ld: drivers/i2c/busses/i2c-sprd.o: in function `sprd_i2c_probe':
    i2c-sprd.c:(.text.sprd_i2c_probe+0x254): undefined reference to `clk_set_parent'

Fixes: 4a2d5f663dab ("i2c: Enable compile testing for more drivers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-22 10:13:33 +01:00
Arnd Bergmann
1059b2bcc6 i2c: remove u300 bus driver
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-22 09:56:56 +01:00
Arnd Bergmann
2cea84ddae i2c: remove sirf bus driver
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-22 09:55:41 +01:00
Arnd Bergmann
edd4488aea ARM: remove tango platform
The smp8758 (tango4) SoC was the last generation of set-top-box chips
to come out of Sigma Designs, and support was added by Marc Gonzalez
and Måns Rullgård between 2015 and 2017, before the company went out of
business and the products were abandoned.

The chip is used in some set-top-boxes such as the Popcorn Hour A-500,
which could have seen some adoption by hobbyists. This has not happened
in the past four years, and support for the more widely used MIPS based
SoCs was never merged at all.

Thanks to Marc and Måns for maintaining for the past years even after the
death of the platform.

Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Link: https://lore.kernel.org/lkml/2d643ebc-09af-a809-eb3f-2aec8ecee501@free.fr/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-20 11:02:34 +01:00
Uwe Kleine-König
e4555a32ba i2c: Drop unused efm32 bus driver
Support for this machine was just removed, so drop the now unused i2c
bus driver, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-17 12:08:47 +01:00
Biwen Li
f7414cd692 i2c: imx: support slave mode for imx I2C driver
The patch supports slave mode for imx I2C driver

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-07 07:58:37 +01:00
Arnd Bergmann
c62dac0a35 i2c: mlxbf: select CONFIG_I2C_SLAVE
If this is not enabled, the interfaces used in this driver do not work:

drivers/i2c/busses/i2c-mlxbf.c:1888:3: error: implicit declaration of function 'i2c_slave_event' [-Werror,-Wimplicit-function-declaration]
                i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
                ^
drivers/i2c/busses/i2c-mlxbf.c:1888:26: error: use of undeclared identifier 'I2C_SLAVE_WRITE_REQUESTED'
                i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
                                       ^
drivers/i2c/busses/i2c-mlxbf.c:1890:32: error: use of undeclared identifier 'I2C_SLAVE_WRITE_RECEIVED'
                ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED,
                                             ^
drivers/i2c/busses/i2c-mlxbf.c:1892:26: error: use of undeclared identifier 'I2C_SLAVE_STOP'
                i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
                                       ^

Fixes: b5b5b32081cd ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-05 14:48:03 +01:00
Geert Uytterhoeven
9890923be3 i2c: mlxbf: I2C_MLXBF should depend on MELLANOX_PLATFORM
The Mellanox BlueField I2C controller is only present on Mellanox
BlueField SoCs.  Hence add a dependency on MELLANOX_PLATFORM, to prevent
asking the user about this driver when configuring a kernel without
Mellanox platform support.

Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-06 15:55:57 +01:00
Jarkko Nikula
332fdaebb6 i2c: i801: Add support for Intel Alder Lake PCH-S
Add PCI ID of SMBus controller on Intel Alder Lake PCH-S

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-29 21:34:26 +02:00
Khalil Blaiech
b5b5b32081 i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC
Add BlueField I2C driver to offer master and slave support for
Mellanox BlueField SoCs. The driver implements an SMBus adapter
and interfaces to multiple busses that can be probed using both
ACPI and Device Tree infrastructures.

The driver supports several SMBus operations to transfer data
back and forth from/to various I2C devices. It is mainly intended
to be consumed by userspace tools and utilities, such as i2c-tools
and decode-dimms to collect memory module information.

On the other hand, the driver has a slave function to support,
among others, an IPMB interface that requires both master and
slave functions to handle transfers between the BlueField SoC
and a board management controllers (e.g., BMC).

Signed-off-by: Khalil Blaiech <kblaiech@mellanox.com>
Reviewed-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-27 19:58:38 +02:00
Wolfram Sang
c4651f11d0 i2c: rcar: add HostNotify support
The I2C core can now utilize a slave interface to handle SMBus
HostNotify events. Enable it in this driver.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21 11:06:52 +02:00
Alain Volmat
6af0771946 i2c: stm32f7: Add SMBus Host-Notify protocol support
Rely on the core functions to implement the host-notify
protocol via the a I2C slave device.

Signed-off-by: Alain Volmat <alain.volmat@st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18 23:02:02 +02:00
Dirk Behme
5b9bacf28a i2c: rcar: Auto select RESET_CONTROLLER
The i2c-rcar driver utilizes the Generic Reset Controller kernel
feature, so select the RESET_CONTROLLER option when the I2C_RCAR
option is selected with a Gen3 SoC.

Fixes: 2b16fd63059ab9 ("i2c: rcar: handle RXDMA HW behaviour on Gen3")
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Andy Lowe <andy_lowe@mentor.com>
[erosca: Add "if ARCH_RCAR_GEN3" per Wolfram's request]
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-28 09:07:40 +02:00
Jarkko Nikula
ab70935d37 i2c: Remove 'default n' from busses/Kconfig
The default value for a config option defaults to 'n' so it doesn't need
to be set here.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
[jdelvare: found another one]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-25 09:50:04 +02:00
Linus Torvalds
e764a1e323 Merge branch 'i2c/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:

 - bus recovery can now be given a pinctrl handle and the I2C core will
   do all the steps to switch to/from GPIO which can save quite some
   boilerplate code from drivers

 - "fallthrough" conversion

 - driver updates, mostly ID additions

* 'i2c/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (32 commits)
  i2c: iproc: fix race between client unreg and isr
  i2c: eg20t: use generic power management
  i2c: eg20t: Drop PCI wakeup calls from .suspend/.resume
  i2c: mediatek: Fix i2c_spec_values description
  i2c: mediatek: Add i2c compatible for MediaTek MT8192
  dt-bindings: i2c: update bindings for MT8192 SoC
  i2c: mediatek: Add access to more than 8GB dram in i2c driver
  i2c: mediatek: Add apdma sync in i2c driver
  i2c: i801: Add support for Intel Tiger Lake PCH-H
  i2c: i801: Add support for Intel Emmitsburg PCH
  i2c: bcm2835: Replace HTTP links with HTTPS ones
  Documentation: i2c: dev: 'block process call' is supported
  i2c: at91: Move to generic GPIO bus recovery
  i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs
  i2c: core: add generic I2C GPIO recovery
  dt-bindings: i2c: add generic properties for GPIO bus recovery
  i2c: rcar: avoid race when unregistering slave
  i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c
  i2c: tegra: Fix runtime resume to re-init VI I2C
  i2c: tegra: Fix the error path in tegra_i2c_runtime_resume
  ...
2020-08-13 18:41:00 -07:00
Mika Westerberg
12745b071e i2c: i801: Add support for Intel Emmitsburg PCH
Add support for SMBus controller on Intel Emmitsburg PCH. This is the
same IP as used in Cannon Lake and derivatives.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-05 11:52:28 +02:00
Mike Rapoport
c59e68250c i2c/buses: remove i2c-puv3 driver
The unicore32 port is removed from the kernel.
There is no point to keep stale i2c bus driver for this architecture.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
2020-07-01 12:10:43 +03:00
Tali Perry
56a1485b10 i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
Add Nuvoton NPCM BMC I2C controller driver.

Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-03 22:39:12 +02:00
Serge Semin
fcb82a939d i2c: designware: Add Baikal-T1 System I2C support
Baikal-T1 System Controller is equipped with a dedicated I2C Controller
which functionality is based on the DW APB I2C IP-core, the only
difference in a way it' registers are accessed. There are three access
register provided in the System Controller registers map, which indirectly
address the normal DW APB I2C registers space. So in order to have the
Baikal-T1 System I2C Controller supported by the common DW APB I2C driver
we created a dedicated Dw I2C controller model quirk, which retrieves the
syscon regmap from the parental dt node and creates a new regmap based on
it.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-30 23:03:06 +02:00
Serge Semin
0daede80f8 i2c: designware: Convert driver to using regmap API
Seeing the DW I2C driver is using flags-based accessors with two
conditional clauses it would be better to replace them with the regmap
API IO methods and to initialize the regmap object with read/write
callbacks specific to the controller registers map implementation. This
will be also handy for the drivers with non-standard registers mapping
(like an embedded into the Baikal-T1 System Controller DW I2C block, which
glue-driver is a part of this series).

As before the driver tries to detect the mapping setup at probe stage and
creates a regmap object accordingly, which will be used by the rest of the
code to correctly access the controller registers. In two places it was
appropriate to convert the hand-written read-modify-write and
read-poll-loop design patterns to the corresponding regmap API
ready-to-use methods.

Note the regmap IO methods return value is checked only at the probe
stage. The rest of the code won't do this because basically we have
MMIO-based regmap so non of the read/write methods can fail (this also
won't be needed for the Baikal-T1-specific I2C controller).

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[wsa: fix type of 'rx_valid' and remove outdated kdoc var description]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-30 23:02:22 +02:00