Add a V4L2 sub-device driver for Galaxycore GC05A2 image sensor.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
[Sakari Ailus: Fold in MAINTAINERS change.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a V4L2 sub-device driver for Galaxycore GC08A3 image sensor.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
[Sakari Ailus: Fold in MAINTAINERS change.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Rename 'st-vgxy61' to 'vgxy61', dropping the vendor prefix to follow the
same naming scheme as the vast majority of device drivers.
The device tree binding does not fall into binding rename exceptions and
therefore must not be changed. Keep its legacy name.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This driver handles the MAX96714 deserializer in tunnel mode.
The CSI output will replicate all the CSI traffic forwarded by
the remote serializer.
The MAX96714 driver can handle MAX96714 and MAX96714F variants
with the same "maxim,max96714f" compatible.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
[Sakari Ailus: Adapt to changed i2c_mux_add_adapter arguments.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This driver handles the MAX96717 serializer in tunnel mode.
All incoming CSI traffic will be tunneled through the GMSL2
link.
The MAX96717 driver can handle MAX96717 and MAX96717F variants
with the same "maxim,max96717f" compatible.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
[Sakari Ailus: Adapt to changed i2c_mux_add_adapter arguments.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a v4l2 subdevice driver for the Sony IMX283 image sensor.
The IMX283 is a 20MP Diagonal 15.86 mm (Type 1) CMOS Image Sensor with
Square Pixel for Color Cameras.
The following features are supported:
- Manual exposure an gain control support
- vblank/hblank/link freq control support
- Test pattern support control
- Arbitrary horizontal and vertical cropping
- Supported resolution:
- 5472x3648 @ 20fps (SRGGB12)
- 5472x3648 @ 25fps (SRGGB10)
- 2736x1824 @ 50fps (SRGGB12)
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
[Sakari Ailus: Take upstream runtime PM API changes into account.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a driver for the OmniVision OV64A40 image sensor.
Co-developed-by: Lee Jackson <lee.jackson@arducam.com>
Signed-off-by: Lee Jackson <lee.jackson@arducam.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Introduce new driver for GalaxyCore GC0308, which is a cheap
640x480 with an on-chip ISP sensor sold since 2010. Data is
provided via parallel bus.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
[Sakari Ailus: Changed MAINTAINERS to match GC2145 entry.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The Alvium camera is shipped with sensor + isp in the same housing.
The camera can be equipped with one out of various sensor and abstract
the user from this. Camera is connected via MIPI CSI-2.
Most of the camera module features are supported, with the main exception
being fw update.
The driver provides all mandatory, optional and recommended V4L2 controls
for maximum compatibility with libcamera
References:
- https://www.alliedvision.com/en/products/embedded-vision-solutions
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
[Sakari Ailus: Assign ret before using it in probe and squash Tommaso's
other fixes.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: alvium-csi2.h: SPDX must use /* */ instead of //]
The Techwell video decoder supports PAL, NTSC standards and
has a parallel BT.656 output interface.
This commit adds support for this device, with basic support
for NTSC and PAL, along with brightness and contrast controls.
The TW9900 is capable of automatic standard detection. This
driver is implemented with support for PAL and NTSC
autodetection.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Mehdi Djait <mehdi.djait@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The THP7312 is an external camera ISP from THine. Add a V4L2 subdev
driver for it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: squash a patch to fix missing mutex_unlock by Laurent.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Addition of support for the Galaxy Core GC2145 XVGA sensor.
The sensor supports both DVP and CSI-2 interfaces however for
the time being only CSI-2 is implemented.
Configurations are currently based on initialization scripts
coming from Galaxy Core and so for that purpose only 3 static
resolutions are supported:
- 640x480
- 1280x720
- 1600x1200
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The MT9M114 is a CMOS camera sensor that combines a 1296x976 pixel array
with a 10-bit dynamic range together with an internal ISP. The driver
exposes two subdevs, one for the pixel array and one for the ISP (named
IFP for Image Flow Processor). Major supported features are
- Full configuration of analog crop and binning in the pixel array
- Full configuration of scaling in the ISP
- Automatic exposure and white balance
- Manual exposure and analog gain
- Horizontal and vertical flip
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a driver for the DW9719 VCM. The driver creates a v4l2 subdevice
and registers a control to set the desired focus.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add driver for TI DS90UB953 FPD-Link III Serializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add driver for TI DS90UB913 FPD-Link III Serializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add driver for TI DS90UB960 FPD-Link III Deserializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The vs6624 camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v4.17. The driver hasn't
been used since them. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sr030pc30 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v2.6.37. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The s5k6aa camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.11. The driver hasn't
been used since them. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The noon010pc30 camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.16. A device tree file
referencing the device has been added in v3.17, but without
corresponding DT bindings, and with DT support in the driver. The driver
thus hasn't been used since v316. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The mt9t001 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.2. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The mt9m032 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.4. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The m5mols camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.11. The driver hasn't
been used since them. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The ad9389b video encoder driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.7. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add driver for the Sony IMX415 CMOS image sensor.
Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Co-developed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The IMX296LLR is a monochrome 1.60MP CMOS sensor from Sony. The driver
supports cropping and binning (but not both at the same time due to
hardware limitations) and exposure, gain, vertical blanking and test
pattern controls.
Preliminary support is also included for the color IMX296LQR sensor.
[Sakari Ailus: Make driver's remove function return void]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a driver for OmniVision OV8858 image sensor.
The driver currently supports operations with 2 and 4 data lanes, in
full resolution and half-binned resolution modes.
The driver has been upported from the PinephonePro BSP available at
https://gitlab.com/pine64-org/linux.git
at commit 8c4a90c12dc2 ("media: i2c: ov8858: Use default subdev
name").
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This driver was until the previous patch unused in the kernel
and depended on platform data that no board was defining.
As no users can be proven to exist, delete the driver.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip
supports two operating modes:
1st) parallel-in -> mipi-csi out
2nd) mipi-csi in -> parallel out
This patch only adds the support for the 1st mode.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: remove() now returns void]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The VGXY61 has a quad lanes CSI-2 output port running at 800mbps per
lane, and supports RAW8, RAW10, RAW12, RAW14 and RAW16 formats.
The driver handles both sensor types:
- VG5661 and VG6661: 1.6 Mpx (1464 x 1104) 75fps.
- VG5761 and VG6761: 2.3 Mpx (1944 x 1204) 60 fps.
The driver supports:
- HDR linearize mode, HDR substraction mode, and no HDR
- GPIOs LEDs strobing
- Digital binning and analog subsampling
- Horizontal and vertical flip
- Manual exposure
- Analog and digital gains
- Test patterns
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
[Sakari Ailus: remove() now returns void]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a V4L2 sub-device driver for OmniVision OV4689 image sensor. This
is a 4 Mpx image sensor using the I2C bus for control and the CSI-2
bus for data.
This driver supports following features:
- manual exposure and analog gain control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
+ 2688x1520 at 30 fps
The driver provides all mandatory V4L2 controls for compatibility with
libcamera. The sensor supports 1/2/4-lane CSI-2 modes, but the driver
implements 4 lane mode only at this moment.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a V4L2 sub-device driver for Omnivision ov08X40 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
+ 3856x2464 at 30FPS
+ 1928x1208 at 30FPS
Signed-off-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The driver has been extensively tested in an i.MX6-based system.
AR0521 is a 5.7 mm x 4.3 mm, 5 MPix RGGB MIPI/HiSPi BSI CMOS sensor
from On Semiconductor.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
It is hard to keep all those options aligned as newer config
changes get added, and we really don't want to have patches adding
new options also touching already existing entries.
So, drop the extra spaces.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add driver for the Intersil ISL7998x Analog to MIPI CSI-2/BT656 decoder.
This chip supports 1/2/4 analog video inputs and converts them into
1/2/4 VCs in MIPI CSI2 stream.
This driver currently supports ISL79987 and both 720x480 and 720x576
resolutions, however as per specification, all inputs must use the
same resolution and standard. The only supported pixel format is now
YUYV/YUV422. The chip should support RGB565 on the CSI2 as well, but
this is currently unsupported.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
To: linux-media@vger.kernel.org
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[Sakari Ailus: Always call pm_runtime_get_and_resume in pre_streamon]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a V4L2 sub-device driver for Omnivision og01a1b b&w
image sensor. This is a camera sensor using the I2C bus
for control and the CSI-2 bus for data.
This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
+ 1280x1024 at 120FPS
Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
[Sakari Ailus: Update according to recent v4l2-async API changes]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor.
This camera sensor is using the i2c bus for control and the
csi-2 bus for data.
The following features are supported:
- manual exposure and analog/digital gain control
- vblank/hblank control
- test pattern
- image vertical flip and horizontal mirror control
- supported resolution:
- 3280x2460 at 30 FPS
- 3264x2448 at 30 FPS
- 1632x1224 at 30 FPS
- supported bayer order output:
- SGRBG10 as default
- SBGGR10 at flip mode
- SRGGB10 at mirror mode
- SGBRG10 at flip + mirror mode
Signed-off-by: Jimmy Su <jimmy.su@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a V4L2 sub-device driver for Hynix Hi-847 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- vflip/hflip control support
- keep SGRBG10 Bayer order output
- support following resolutions:
+ 3264x2448 at 30FPS
+ 1632x1224 at 60FPS
[Sakari Ailus: Wrapped a few long lines.]
Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The OV5693 is a 5 Mpx CMOS image sensor, connected via MIPI CSI-2. The
chip is capable of a single lane configuration, but currently only two
lanes are supported.
Most of the sensor's features are supported, with the main exception
being the lens correction algorithm.
The driver provides all mandatory, optional and recommended V4L2 controls
for maximum compatibility with libcamera.
[mchehab: fixed a coding style warning]
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The SK Hynix Hi-846 is a 1/4" 8M Pixel CMOS Image Sensor. It supports
usual features like I2C control, CSI-2 for frame data, digital/analog
gain control or test patterns.
This driver supports the 640x480, 1280x720 and 1632x1224 resolution
modes. It supports runtime PM in order not to draw any unnecessary power.
The part is also called YACG4D0C9SHC and a datasheet can be found at
https://product.skhynix.com/products/cis/cis.go
The large sets of partly undocumented register values are for example
found when searching for the hi846_mipi_raw_Sensor.c Android driver.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This driver supports following features:
- phase detection auto focus (PDAF)
- manual exposure and analog/digital gain control
- vblank/hblank control
- test pattern
- image vertical flip and horizontal mirror control
- 4208x3120 at 30FPS
- 2080x1170 at 60FPS
Signed-off-by: Arec Kao <arec.kao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a v4l2 sub-device driver for the OmniVisison ov9282
black&white image sensor.
The camera sensor uses the i2c bus for control and the
csi-2 bus for data.
The following features are supported:
- manual exposure and analog gain control support
- vblank/hblank/pixel rate/link freq control support
- supported resolution:
- 1280x720 @ 30fps
[Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.]
Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: Paul J. Murphy <paul.j.murphy@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a v4l2 sub-device driver for the Sony imx412 image sensor.
This is a camera sensor using the i2c bus for control and the
csi-2 bus for data.
The following features are supported:
- manual exposure and analog gain control support
- vblank/hblank/pixel rate/link freq control support
- supported resolution:
- 4056x3040 @ 30fps
- supported bayer order output:
- SRGGB10
[Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.]
Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: Paul J. Murphy <paul.j.murphy@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a v4l2 sub-device driver for the Sony imx335 image sensor.
ThE camera sensor uses the i2c bus for control and the csi-2
bus for data.
The following features are supported:
- manual exposure and analog gain control support
- vblank/hblank/pixel rate/link freq control support
- supported resolution:
- 2592x1940 @ 30fps
- supported bayer order output:
- SRGGB12
[Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.]
Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: Paul J. Murphy <paul.j.murphy@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a V4L2 sub-device driver for the Sony IMX208 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
[Sakari Ailus: Rename sensor async register function to make it compile,
use exposure_max and wrap a few long lines.]
Signed-off-by: Ping-Chung Chen <ping-chung.chen@intel.com>
Signed-off-by: Yeh, Andy <andy.yeh@intel.com>
Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the introduction of the RDACM21 camera module support in commit
a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module") the
symbols defined by the max9271 library were exported twice if multiple
users of the library were compiled in at the same time.
In example:
WARNING: modpost: drivers/media/i2c/rdacm21-camera_module:
'max9271_set_serial_link' exported twice. Previous export was in
drivers/media/i2c/rdacm20-camera_module.ko
Fix this by making the max9271 file a module and have the driver
using its functions select it.
Fixes: a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a v4l2 sub-device driver for the Sony imx334 image sensor.
This is a camera sensor using the i2c bus for control and the
csi-2 bus for data.
The following features are supported:
- manual exposure and analog gain control support
- vblank/hblank/pixel rate/link freq control support
- supported resolution:
- 3840x2160 @ 60fps
- supported bayer order output:
- SRGGB12
Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com>
Reviewed-by: Gjorgji Rosikopulos <gjorgjix.rosikopulos@intel.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: Paul J. Murphy <paul.j.murphy@intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
