Error in mmu_interval_notifier_insert() can leave a NULL
notifier.mm pointer. Catch that and return early.
Fixes: ed29c2691188 ("drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7.")
Cc: <stable@vger.kernel.org> # v5.13+
[tursulin: Added Fixes and cc stable.]
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Shawn Lee <shawn.c.lee@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219125047.28906-1-nirmoy.das@intel.com
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The drm_num_crtcs() helper determines the number of CRTCs by iterating
over the list of CRTCs that have been registered with the mode config.
However, we already keep track of that number in the mode config's
num_crtcs field, so we can simply retrieve the value from that and
remove the extra helper function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240227112038.411846-1-thierry.reding@gmail.com
The resource is inclusive of the ->start and ->end addresses so this
calculation is not correct. It should be "res->end - res->start + 1".
Use the resource_size() to do the calculation.
Fixes: 90393c9b5408 ("drm/imx/dcss: request memory region")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4914592b-4256-4c9c-bc1d-6dec1e473831@moroto.mountain
Resolves the proxy include via <linux/fb.h>, which does not require the
backlight header.
v3:
* fix grammar in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219093941.3684-3-tzimmermann@suse.de
This ensures that the memory mapped by ioremap for adev->rmmio, is
properly handled in amdgpu_device_init(). If the function exits early
due to an error, the memory is unmapped. If the function completes
successfully, the memory remains mapped.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:4337 amdgpu_device_init() warn: 'adev->rmmio' from ioremap() not released on lines: 4035,4045,4051,4058,4068,4337
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missing break statement in the ATOM_ARG_IMM case of a switch statement,
adds the missing break statement, ensuring that the program's control
flow is as intended.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/atom.c:323 atom_get_src_int() warn: ignoring unreachable code.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Cc: Jammy Zhou <Jammy.Zhou@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SOCs with SMUv13.0.6, mode-2 reset takes a bit longer. Wait for 200ms
before trying to restore config space after mode-2 reset.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This vendor specific property has never been used by userspace
software and conflicts with the panel_power_savings sysfs file.
That is a compositor and user could fight over the same data.
Fixes: 63d0b87213a0 ("drm/amd/display: add panel_power_savings sysfs entry to eDP connectors")
Suggested-by: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: "Sun peng Li (Leo)" <Sunpeng.Li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Detect DP tunnels and enable the BW allocation mode on them. Send a
hotplug notification to userspace in response to a BW change.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-22-imre.deak@intel.com
The TBT DP tunnel BW request logic in the Thunderbolt Connection Manager
depends on the GFX driver reading out the sink's DPRX capabilities in
response to a long HPD pulse. Since in i915 this read-out can be blocked
by another connector's/encoder's hotplug event handling (which is
serialized by drm_mode_config::connection_mutex), do a dummy DPRX read-out
in the encoder's HPD pulse handler (which is not blocked by other
encoders).
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-21-imre.deak@intel.com
Suspend and resume DP tunnels during system suspend/resume, disabling
the BW allocation mode during suspend, re-enabling it after resume. This
reflects the link's BW management component (Thunderbolt CM) disabling
BWA during suspend. Before any BW requests the driver must read the
sink's DPRX capabilities (since the BW manager requires this
information, so snoops for it on AUX), so ensure this read takes place.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-20-imre.deak@intel.com
A follow-up change will need to resume DP tunnels during system resume,
so call intel_dp_sync_state() always for DDI encoders, so this function
can resume the tunnels for all DP connectors.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-19-imre.deak@intel.com
Handle DP tunnel IRQs a sink (or rather a BW management component like
the Thunderbolt Connection Manager) raises to signal the completion of a
BW request by the driver, or to signal any state change related to the
link BW.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-18-imre.deak@intel.com
Allocate and free the DP tunnel BW required by a stream while
enabling/disabling the stream during a modeset.
v2:
- Move the allocation up from encoder hooks to
intel_atomic_commit_tail().
v3:
- Update the commit subject. (Ville)
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-17-imre.deak@intel.com
Compute the BW required through a DP tunnel on links with such tunnels
detected and add the corresponding atomic state during a modeset.
v2:
- Fix error check of intel_dp_tunnel_compute_stream_bw(). (Ville)
- Move intel_dp_tunnel_atomic_cleanup_inherited_state() to this patch.
(Ville)
- Move intel_dp_tunnel_atomic_clear_stream_bw() to this patch.
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-16-imre.deak@intel.com
Take any link BW limitation into account in
intel_dp_max_link_data_rate(). Such a limitation can be due to multiple
displays on (Thunderbolt) links with DP tunnels sharing the link BW.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-15-imre.deak@intel.com
Add the atomic state during a modeset required to enable the DP tunnel
BW allocation mode on links where such a tunnel was detected. This state
applies to an already enabled output, the state added for a newly
enabled output will be computed and added/cleared to/from the atomic
state in a follow-up patch.
v2:
- s/old_crtc_state/crtc_state in intel_crtc_duplicate_state().
- Move intel_dp_tunnel_atomic_cleanup_inherited_state() to a follow-up
patch adding the corresponding state. (Ville)
- Move intel_dp_tunnel_atomic_clear_stream_bw() to a follow-up
patch adding the corresponding state.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-14-imre.deak@intel.com
Add support to enable the DP tunnel BW allocation mode. Follow-up
patches will call the required helpers added here to prepare for a
modeset on a link with DP tunnels, the last change in the patchset
actually enabling BWA.
With BWA enabled, the driver will expose the full mode list a display
supports, regardless of any BW limitation on a shared (Thunderbolt)
link. Such BW limits will be checked against only during a modeset, when
the driver has the full knowledge of each display's BW requirement.
If the link BW changes in a way that a connector's modelist may also
change, userspace will get a hotplug notification for all the connectors
sharing the same link (so it can adjust the mode used for a display).
The BW limitation can change at any point, asynchronously to modesets
on a given connector, so a modeset can fail even though the atomic check
for it passed. In such scenarios userspace will get a bad link
notification and in response is supposed to retry the modeset.
v2:
- Fix old vs. new connector state in intel_dp_tunnel_atomic_check_state().
(Ville)
- Fix propagating the error from
intel_dp_tunnel_atomic_compute_stream_bw(). (Ville)
- Move tunnel==NULL checks from driver to DRM core helpers. (Ville)
- Simplify return flow from intel_dp_tunnel_detect(). (Ville)
- s/dp_tunnel_state/inherited_dp_tunnels (Ville)
- Simplify struct intel_dp_tunnel_inherited_state. (Ville)
- Unconstify object pointers (vs. states) where possible. (Ville)
- Init crtc_state while declaring it in check_group_state(). (Ville)
- Join obj->base.id, obj->name arg lines in debug prints to reduce LOC.
(Ville)
- Add/rework intel_dp_tunnel_atomic_alloc_bw() to prepare for moving the
BW allocation from encoder hooks up to intel_atomic_commit_tail()
later in the patchset.
- Disable BW alloc mode during system suspend.
- Allocate the required BW for all tunnels during system resume.
- Add intel_dp_tunnel_atomic_clear_stream_bw() instead of the open-coded
sequence in a follow-up patch.
- Add function documentation to all exported functions.
- Add CONFIG_USB4 dependency to CONFIG_DRM_I915_DP_TUNNEL.
v3:
- Rebase on intel_dp_get_active_pipes() change in previous patch.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-4-imre.deak@intel.com
Sync instead of only try-sync non-blocking commits when getting the
active pipes through a given DP port. Atm intel_dp_get_active_pipes()
will only try to sync a given pipe and if that would block ignore the
pipe. This was supposed to avoid link retraining in case a pending
modeset would do that anyway, however that could incorrectly ignore
fastset pipes as well for instance (which don't retraing the link).
The TC port reset path needs to handle all pipes, even if a waiting for
a pending commit would block. To account for the above cases sync all
the pipes unconditionally.
This also prepares for a follow-up change enabling the DP tunnel BW
allocation mode which needs to ensure that all active pipes are synced
and returned from intel_dp_get_active_pipes().
v2:
- Add a separate function to try-sync the pipes. (Ville)
v3:
- Just sync the pipes unconditionally in intel_dp_get_active_pipes().
(Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v2)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-3-imre.deak@intel.com
Add intel_dp_max_link_data_rate() to get the link BW vs. the sink DPRX
BW used by a follow-up patch enabling the DP tunnel BW allocation mode.
The link BW can be below the DPRX BW due to a BW limitation on a link
shared by multiple sinks.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-11-imre.deak@intel.com
Factor out a function to read the sink's DPRX capabilities used by a
follow-up patch enabling the DP tunnel BW allocation mode.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-10-imre.deak@intel.com
Factor out a function updating the sink's link rate and lane count
capabilities, used by a follow-up patch enabling the DP tunnel BW
allocation mode.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-9-imre.deak@intel.com
Export intel_dp_max_common_rate() and intel_dp_max_lane_count() used by
a follow-up patch enabling the DP tunnel BW allocation mode.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-8-imre.deak@intel.com
Factor out intel_dp_config_required_rate() used by a follow-up patch
enabling the DP tunnel BW allocation mode.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-7-imre.deak@intel.com
Instead of intel_dp_max_data_rate() use the equivalent
drm_dp_max_dprx_data_rate() which was copied from the former one in a
previous patch.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-6-imre.deak@intel.com
On shared (Thunderbolt) links with DP tunnels, the modeset may need to
be retried on all connectors on the link due to a link BW limitation
arising only after the atomic check phase. To support this add a helper
function queuing a work to retry the modeset on a given port's connector
and at the same time any MST connector with streams through the same
port. A follow-up change enabling the DP tunnel Bandwidth Allocation
Mode will take this into use.
v2:
- Send the uevent only to enabled MST connectors. (Jouni)
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-5-imre.deak@intel.com
The system resume display mode restoration should happen with an output
configuration matching that of the suspend time saved mode. Since the
restored mode configuration is subject to the bpp fallback logic,
starting out with an unlimited bpp and reducing the bpp as required by
any (MST) link BW limit, the resulting bpp will match the one during
suspend only if the BW limit checks during suspend and resume are
applied in an identical way. The latter is not guaranteed at the moment,
since the pre-suspend MST topology may not be in place during resume
(for instance if the MST sink was disconnected while being suspended),
which makes the MST link BW check accept the unlimited bpp mode
configuration unconditionally without ensuring that the required BW fits
into the available MST link BW.
To fix the above, initialize the bpp fallback logic with the max link
bpp / force-FEC limits left behind by the suspend time mode save.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-4-imre.deak@intel.com
Add support for Display Port tunneling. For now this includes the
support for Bandwidth Allocation Mode (BWA), leaving adding Panel Replay
support for later.
BWA allows using displays that share the same (Thunderbolt) link with
their maximum resolution. Atm, this may not be possible due to the
coarse granularity of partitioning the link BW among the displays on the
link: the BW allocation policy is in a SW/FW/HW component on the link
(on Thunderbolt it's the SW or FW Connection Manager), independent of
the driver. This policy will set the DPRX maximum rate and lane count
DPCD registers the GFX driver will see (0x00000, 0x00001, 0x02200,
0x02201) based on the available link BW.
The granularity of the current BW allocation policy is coarse, based on
the required link rate in the 1.62Gbs..8.1Gbps range and it may prevent
using higher resolutions all together: the display connected first will
get a share of the link BW which corresponds to its full DPRX capability
(regardless of the actual mode it uses). A subsequent display connected
will only get the remaining BW, which could be well below its full
capability.
BWA solves the above coarse granularity (reducing it to a 250Mbs..1Gps
range) and first-come/first-served issues by letting the driver request
the BW for each display on a link which reflects the actual modes the
displays use.
This patch adds the DRM core helper functions, while a follow-up change
in the patchset takes them into use in the i915 driver.
v2:
- Fix prepare_to_wait vs. wake-up cond check order in
allocate_tunnel_bw(). (Ville)
- Move tunnel==NULL checks from callers in drivers to here. (Ville)
- Avoid var inits in declaration blocks that can fail or have
side-effects. (Ville)
- Use u8 for driver and group IDs. (Ville)
- Simplify API removing drm_dp_tunnel_get/put_untracked(). (Ville)
- Reuse str_yes_no() instead of a local yes_no_chr(). (Ville)
- s/drm_dp_tunnel_atomic_clear_state()/free_tunnel_state() and unexport
the function. (Ville)
- s/clear_tunnel_group_state()/free_group_state() and move kfree() to
this function. (Ville)
- Add separate group_free_bw() helper and describe what the tunnel
estimated BW includes. (Ville)
- Improve help text for CONFIG_DRM_DISPLAY_DP_TUNNEL. (Ville)
- Add code comment explaining the purpose of DPCD reg read helpers.
(Ville)
- Add code comment describing the tunnel group name prefix format.
(Ville)
- Report the allocated BW as undetermined until the first allocation
request.
- Skip allocation requests matching the previous request.
- Clear any stale BW request status flags before a new request.
- Add missing error return check of drm_dp_tunnel_atomic_get_group_state()
in drm_dp_tunnel_atomic_set_stream_bw().
- Add drm_dp_tunnel_get_allocated_bw().
- s/drm_dp_tunnel_atomic_get_tunnel_bw/drm_dp_tunnel_atomic_get_required_bw
- Fix return value description in function doc of drm_dp_tunnel_detect().
- Add function documentation to all exported functions.
v3:
- Improve grouping of fields in drm_dp_tunnel_group struct. (Uma)
- Fix validating the BW granularity DPCD reg value. (Uma)
- Document return value of check_and_clear_status_change(). (Uma)
- Fix resetting drm_dp_tunnel_ref::tunnel in drm_dp_tunnel_ref_put().
(Ville)
- Allow for ALLOCATED_BW to change after a BWA enable/disable sequence.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-2-imre.deak@intel.com
Copy intel_dp_max_data_rate() to DRM core. It will be needed by a
follow-up DP tunnel patch, checking the maximum rate the DPRX (sink)
supports. Accordingly use the drm_dp_max_dprx_data_rate() name for
clarity. This patchset will also switch calling the new DRM function
in i915 instead of intel_dp_max_data_rate().
While at it simplify the function documentation/comments, removing
parts described already by drm_dp_bw_channel_coding_efficiency().
v2: (Ville)
- Remove max_link_rate_kbps.
- Simplify the function documentation.
v3:
- Rebased on latest drm-tip.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-1-imre.deak@intel.com
We see some monitors and docks report incorrect hdcp version
and capability in first few reads so we read rx_caps three times
before we conclude the monitor's or docks HDCP capability
--v2
-Add comment to justify the 3 time read loop for hdcp capability[Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-7-suraj.kandpal@intel.com
Allocate stream id after HDCP AKE stage and not before so that it
can also be done during link integrity check.
Right now for MST scenarios LIC fails after hdcp enablement for this
reason.
--v2
-no need for else block in prepare_streams function [Ankit]
--v3
-remove intel_hdcp argument from required_content_stream function
[Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-6-suraj.kandpal@intel.com
Whenever LIC fails instead of moving from ENABLED to DESIRED
CP property we directly enable HDCP1.4 without informing the userspace
of this failure in link integrity check.
Now we will just update the value to DESIRED send the event to
userspace and then continue with the normal flow of HDCP enablement.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-5-suraj.kandpal@intel.com
Whenever LIC fails instead of moving from ENABLED to DESIRED
CP property we directly enable HDCP2.2 without informing the userspace
of this failure in link integrity check.
Now we will just update the value to DESIRED send the event to
userspace and then continue with the normal flow of HDCP enablement.
--v2
-Don't change the function prototype in this function [Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-4-suraj.kandpal@intel.com
Currently intel_hdcp is not being extracted from primary connector
this patch fixes that.
Fixes: 524240b231ea ("drm/i915/hdcp: Propagate aux info in DP HDCP functions")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226063051.1685326-3-suraj.kandpal@intel.com
We found a stability issue on MT8188 when connecting an external monitor
in 2560x1440@144Hz mode. Checked with the designer, there is a function
called "prefetch" which is working during VBP (triggered by VSYNC).
If the duration of VBP is too short, the throughput requirement could
increase more than 3 times and lead to stability issues.
The mode settings that VDOSYS supports are mainly affected by clock
rate and throughput, display driver should filter these settings
according to the SoC's limitation to avoid unstable conditions.
Since currently the mode filter is only available on MT8195 and MT8188
and they share the same compatible name, the reference number (8250)
is hard coded instead of in the driver data.
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.corp-partner.google.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240220093711.20546-2-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
On devices which have multi-partition nodes, keep partition id in
location_id[31:28].
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes a MES firmware boot failure issue
when backdoor loading the MES firmware.
MES firmware runtime DRAM size is changed to 512k,
the driver needs to reserve this amount of memory in
FB, otherwise adjacent memory will be overwritten by
the MES firmware startup code.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, GPU resets can now be performed successfully on the Raven
series. While GPU reset is required for the S3 suspend abort case.
So now can enable gpu reset for S3 abort cases on the Raven series.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's unreasonable to use 0 as the power1_min_cap when
OD is disabled. So, use the same lower limit as the value
used when OD is enabled.
Fixes: 1958946858a6 ("drm/amd/pm: Support for getting power1_cap_min value")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VF should not program this register.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Zhigang Luo <Zhigang.Luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check amdgpu_ras_mask to fix ineffective ras_mask setting
due to special asic without sram ecc enable but with poison
supported.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If fatal error is detected, packet submission won't go through. Return
error in such cases. Also, avoid waiting for fence when fatal error is
detected.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For a RAS error that needs a full reset to recover, set the fatal error
status. Clear the status once the device is reset.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds a check in the map_hw_resources function to prevent a potential
buffer overflow. The function was accessing arrays using an index that
could potentially be greater than the size of the arrays, leading to a
buffer overflow.
Adds a check to ensure that the index is within the bounds of the
arrays. If the index is out of bounds, an error message is printed and
break it will continue execution with just ignoring extra data early to
prevent the buffer overflow.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
