Rename local variables int34x_thermal_zone in int340x_thermal_zone_add()
and int340x_thermal_zone_remove() to int34x_zone which allows a number
of code lines to be shorter and easier to read and adjust some white
space for consistency.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Improve some inconsistent usage of white space in int340x_thermal_zone.c,
fix up one coding style issue in it (missing braces around an else
branch of a conditional) and while at it replace a !ACPI_FAILURE()
check with an equivalent ACPI_SUCCESS() one.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
It is slightly better to make the ACPI thermal helper functions retrieve
the trip point temperature only instead of doing the full trip point
initialization, because they are also used for updating some already
registered trip points, in which case initializing a new trip just
in order to update the temperature of an existing one is somewhat
wasteful.
Modify the ACPI thermal helpers accordingly and update their users.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Modify int340x_thermal_zone_add() to register the thermal zone along
with a trip points table, which allows the trip-related zone callbacks
to be dropped, because they are not needed any more.
In order to consolidate the code, use ACPI trip library functions to
populate generic trip points in int340x_thermal_read_trips() and to
update them in int340x_thermal_update_trips().
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because the ->get_trip_temp() and ->get_trip_type() thermal zone
callbacks are only invoked from __thermal_zone_get_trip() which is
always called by the thermal core under the zone lock, it is sufficient
for int340x_thermal_update_trips() to acquire the zone lock for mutual
exclusion with those callbacks.
Accordingly, modify int340x_thermal_update_trips() to use the zone lock
instead of the internal trip_mutex and drop the latter which is not
necessary any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is generally invalid to change the trip point indices after they have
been exposed via sysfs.
Moreover, the thermal objects in the ACPI namespace cannot go away and
appear on the fly. In practice, the only thing that can happen when the
INT3403_PERF_TRIP_POINT_CHANGED notification is sent by the platform
firmware is a change of the return values of those thermal objects.
For this reason, add a special function for updating the trip point
temperatures after re-evaluating the respective ACPI thermal objects
and change int3403_notify() to invoke it instead of
int340x_thermal_read_trips() that would change the trip point indices
on errors. Also remove the locking from the latter, because it is only
called before registering the thermal zone and it cannot race with the
zone's callbacks.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In some cases it is still useful to register a trip point if the
temperature returned by the corresponding ACPI thermal object (for
example, _HOT) is invalid to start with, because the same ACPI
thermal object may start to return a valid temperature after a
system configuration change (for example, from an AC power source
to battery an vice versa).
For this reason, if the ACPI thermal object evaluated by
thermal_acpi_trip_init() successfully returns a temperature value that
is out of the range of values taken into account, initialize the trip
point using THERMAL_TEMP_INVALID as the temperature value instead of
returning an error to allow the user of the trip point to decide what
to do with it.
Also update pch_wpt_add_acpi_psv_trip() to reject trip points with
invalid temperature values.
Fixes: 7a0e39748861 ("thermal: ACPI: Add ACPI trip point routines")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make proc_thermal_pci_probe() register the TCPU_PCI thermal zone along
with the trip point used by it and drop the zone callbacks related to
this trip point that are not needed any more.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is possible that the system manufacturer locks down thermal tuning
beyond what is usually done on the given platform. In that case user
space calibration tools should not try to adjust the thermal
configuration of the system.
To allow user space to check if that is the case, add a new sysfs
attribute "production_mode" that will be present when the ACPI DCFG
method is present under the INT3400 device object in the ACPI Namespace.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to prevent int340x_thermal_get_trip_type() from possibly
racing with int340x_thermal_read_trips() invoked by int3403_notify()
add locking to it in analogy with int340x_thermal_get_trip_temp().
Fixes: 6757a7abe47b ("thermal: intel: int340x: Protect trip temperature from concurrent updates")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Trip temperatures are read using ACPI methods and stored in the memory
during zone initializtion and when the firmware sends a notification for
change. This trip temperature is returned when the thermal core calls via
callback get_trip_temp().
But it is possible that while updating the memory copy of the trips when
the firmware sends a notification for change, thermal core is reading the
trip temperature via the callback get_trip_temp(). This may return invalid
trip temperature.
To address this add a mutex to protect the invalid temperature reads in
the callback get_trip_temp() and int340x_thermal_read_trips().
Fixes: 5fbf7f27fa3d ("Thermal/int340x: Add common thermal zone handler")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.0+ <stable@vger.kernel.org> # 5.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal framework gives the possibility to register the trip
points along with the thermal zone. When that is done, no get_trip_*
callbacks are needed and they can be removed.
Convert the existing callbacks content logic into generic trip points
initialization code and register them along with the thermal zone.
In order to consolidate the code, use an ACPI trip library function
to populate a generic trip point.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject and changelog edits, rebase ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Add library routines to populate a generic thermal trip point
structure with data obtained by evaluating a specific object in the
ACPI Namespace.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Add the PCI ID for the Wellsburg C610 series chipset PCH.
The driver can read the temperature from the Wellsburg PCH with only
the PCI ID added and no other modifications.
Signed-off-by: Tim Zimmermann <tim@linux4.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* thermal: (734 commits)
thermal: core: call put_device() only after device_register() fails
Linux 6.2-rc4
kbuild: Fix CFI hash randomization with KASAN
firmware: coreboot: Check size of table entry and use flex-array
kallsyms: Fix scheduling with interrupts disabled in self-test
ata: pata_cs5535: Don't build on UML
lockref: stop doing cpu_relax in the cmpxchg loop
x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space
efi: tpm: Avoid READ_ONCE() for accessing the event log
io_uring: lock overflowing for IOPOLL
ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()
iommu/iova: Fix alloc iova overflows issue
iommu: Fix refcount leak in iommu_device_claim_dma_owner
iommu/arm-smmu-v3: Don't unregister on shutdown
iommu/arm-smmu: Don't unregister on shutdown
iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer
platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode
ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate()
platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode
...
Follow the advice of the Documentation/filesystems/sysfs.rst that show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
[ rjw: Subject rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
put_device() shouldn't be called before a prior call to
device_register(). __thermal_cooling_device_register() doesn't follow
that properly and needs fixing. Also
thermal_cooling_device_destroy_sysfs() is getting called unnecessarily
on few error paths.
Fix all this by placing the calls at the right place.
Based on initial work done by Caleb Connolly.
Fixes: 4748f9687caa ("thermal: core: fix some possible name leaks in error paths")
Fixes: c408b3d1d9bb ("thermal: Validate new state in cur_state_store()")
Reported-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update function parameter descriptions for sensor_get_auxtrip() and
sensor_set_auxtrip().
[ rjw: New changelog, subject edits ]
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The return value from the call to intel_tcc_get_tjmax() is int, which can
be a negative error code. However, the return value is being assigned to
an u32 variable 'tj_max', so making 'tj_max' an int.
Eliminate the following warning:
./drivers/thermal/intel/intel_soc_dts_iosf.c:394:5-11: WARNING: Unsigned expression compared with zero: tj_max < 0
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3637
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL-terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Link: https://lore.kernel.org/r/202212280945491860150@zte.com.cn
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
The thermal-zone-device lock is held by core when setting trip points
and the driver takes its chip lock in the corresponding callback.
Fetching the thermal trip points using thermal_zone_get_trip() also
involves taking the thermal-zone-device lock, which means that the chip
lock can not be held when doing so.
Drop the chip lock temporarily during probe to avoid the lock inversion
that was detected by lockdep:
======================================================
WARNING: possible circular locking dependency detected
6.1.0-next-20221213 #122 Not tainted
------------------------------------------------------
systemd-udevd/264 is trying to acquire lock:
ffff741e444a0920 (&chip->lock){+.+.}-{3:3}, at: qpnp_tm_get_temp+0xb4/0x1b0 [qcom_spmi_temp_alarm]
but task is already holding lock:
ffff741e44341618 (&tz->lock){+.+.}-{3:3}, at: thermal_zone_device_update+0x2c/0x70
which lock already depends on the new lock.
Fixes: 78c3e2429be8 ("thermal/drivers/qcom: Use generic thermal_zone_get_trip() function")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221214131617.2447-5-johan+linaro@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
The set_trip_temp() callback is used when changing the trip temperature
through sysfs. As it is called with the thermal-zone-device lock held
it must not use thermal_zone_get_trip() directly or it will deadlock.
Fixes: 56d7b397cc29 ("thermal/drivers/tegra: Use generic thermal_zone_get_trip() function")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221214131617.2447-4-johan+linaro@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
The set_trip_temp() callback is used when changing the trip temperature
through sysfs. As it is called with the thermal-zone-device lock held
it must not use thermal_zone_get_trip() directly or it will deadlock.
Fixes: 78c3e2429be8 ("thermal/drivers/qcom: Use generic thermal_zone_get_trip() function")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221214131617.2447-2-johan+linaro@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Commit 13bea86623be ("thermal/of: Remove of_thermal_get_crit_temp()")
removed the function of_thermal_get_crit_temp() and this is causing a
NULL pointer deference crash when attempting to call the 'get_crit_temp'
function pointer because this function pointer is no longer initialised.
Fix this by replacing the call to the 'get_crit_temp' function pointer
with a call to the function thermal_zone_get_crit_temp() instead.
Fixes: 13bea86623be ("thermal/of: Remove of_thermal_get_crit_temp()")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20221010150311.40384-1-jonathanh@nvidia.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The driver is assuming the get_critical temperature exists as it is
inherited by the thermal of ops. But this one has been removed in
favor of the generic one.
Use the generic thermal_zone_get_crit_temp() function instead
Fixes: 13bea86623be ("thermal/of: Remove of_thermal_get_crit_temp(")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20221003092602.1323944-30-daniel.lezcano@linaro.org
In the process of replacing the get_trip_* ops by the generic trip
points, the current code has an 'override' property to add another
indirection to a different ops.
Rework this approach to prevent this indirection and make the code
ready for the generic trip points conversion.
Actually the get_temp() is different regarding the platform, so it is
pointless to add a new set of ops but just create dynamically the ops
at init time.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20221003092602.1323944-29-daniel.lezcano@linaro.org
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20221003092602.1323944-25-daniel.lezcano@linaro.org
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221003092602.1323944-24-daniel.lezcano@linaro.org
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20221003092602.1323944-23-daniel.lezcano@linaro.org
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20221003092602.1323944-22-daniel.lezcano@linaro.org
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert to the generic trip points
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20221003092602.1323944-21-daniel.lezcano@linaro.org
The thermal core is providing the generic thermal_zone_set_trip()
function which does exactly what the OF ops function is doing.
It is pointless to define our own version, just remove the ops and the
thermal_zone_set_trip() will take care of it.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20221003092602.1323944-19-daniel.lezcano@linaro.org
There is no benefit with the of_thermal_is_trip_valid() function as it
does the check the thermal_zone_get_trip() is already doing for the
sake of getting the trip point.
As all the calls have been replaced by thermal_zone_get_trip(), there
is no more users of of_thermal_is_trip_valid().
Remove the function.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20221003092602.1323944-18-daniel.lezcano@linaro.org
The thermal OF code uses the generic trip points to initialize the
thermal zone. Consequently thermal_zone_get_num_trips() can be used
and the of_thermal_get_ntrips() is no longer needed. Remove it.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20221003092602.1323944-17-daniel.lezcano@linaro.org
The thermal core framework allows to get the number of thermal trips,
use it instead of visiting the thermal core structure internals.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20221003092602.1323944-16-daniel.lezcano@linaro.org
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20221003092602.1323944-15-daniel.lezcano@linaro.org
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Amit Kucheria <amitk@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221003092602.1323944-14-daniel.lezcano@linaro.org
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20221003092602.1323944-13-daniel.lezcano@linaro.org
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20221003092602.1323944-12-daniel.lezcano@linaro.org
The thermal_zone_get_trip() does the same check as
of_thermal_is_trip_valid(). Replace the call to
of_thermal_is_trip_valid() by thermal_zone_get_trip().
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221003092602.1323944-10-daniel.lezcano@linaro.org
The thermal core framework allows to get the number of thermal trips,
use it instead of visiting the thermal core structure internals.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221003092602.1323944-9-daniel.lezcano@linaro.org
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221003092602.1323944-8-daniel.lezcano@linaro.org
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
The thermal OF code uses the thermal_zone_device_register_with_trips()
function. It builds the trips array and pass it to the register
function. That means the get_trip_* ops are duplicated with what does
already the core code.
Remove them.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20221003092602.1323944-6-daniel.lezcano@linaro.org
