When suspending the scan filter policy cannot be 0x00 (no acceptlist)
since that means the host has to process every advertisement report
waking up the system, so this attempts to check if hdev is marked as
suspended and if the resulting filter policy would be 0x00 (no
acceptlist) then skip passive scanning if thre no devices in the
acceptlist otherwise reset the filter policy to 0x01 so the acceptlist
is used since the devices programmed there can still wakeup be system.
Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Do not attempt to send any hci command to controller if *setup* function
fails.
Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It's more natural to use ktime/ns instead of keeping around usec,
especially since we're comparing it against user provided timers,
so convert napi busy poll internal handling to ktime. It's also nicer
since the type (ktime_t vs unsigned long) now tells the unit of measure.
Keep everything as ktime, which we convert to/from micro seconds for
IORING_[UN]REGISTER_NAPI. The net/ busy polling works seems to work with
usec, however it's not real usec as shift by 10 is used to get it from
nsecs, see busy_loop_current_time(), so it's easy to get truncated nsec
back and we get back better precision.
Note, we can further improve it later by removing the truncation and
maybe convincing net/ to use ktime/ns instead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/95e7ec8d095069a3ed5d40a4bc6f8b586698bc7e.1722003776.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the regulator can't be used without the USB controller also
tighten the dependency to match, as well as the default.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240726-regulator-restrict-rzg2l-v1-1-640e508896e2@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix request without payloads cleanup (Leon)
- Use new protection information format (Francis)
- Improved debug message for lost pci link (Bart)
- Another apst quirk (Wang)
- Use appropriate sysfs api for printing chars (Markus)
-----BEGIN PGP SIGNATURE-----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=1Rzv
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.11-2024-07-26' of git://git.infradead.org/nvme into block-6.11
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.11
- Fix request without payloads cleanup (Leon)
- Use new protection information format (Francis)
- Improved debug message for lost pci link (Bart)
- Another apst quirk (Wang)
- Use appropriate sysfs api for printing chars (Markus)"
* tag 'nvme-6.11-2024-07-26' of git://git.infradead.org/nvme:
nvme-pci: add missing condition check for existence of mapped data
nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
nvme-pci: Fix the instructions for disabling power management
nvme: remove redundant bdev local variable
nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
nvme/pci: Add APST quirk for Lenovo N60z laptop
The PHY built in to the Realtek RTL8366S switch controller was
previously supported by genphy_driver. This PHY does not implement MMD
operations. Since commit 9b01c885be36 ("net: phy: c22: migrate to
genphy_c45_write_eee_adv()"), MMD register reads have been made during
phy_probe to determine EEE support. For genphy_driver, these reads are
transformed into 802.3 annex 22D clause 45-over-clause 22
mmd_phy_indirect operations that perform MII register writes to
MII_MMD_CTRL and MII_MMD_DATA. This overwrites those two MII registers,
which on this PHY are reserved and have another function, rendering the
PHY unusable while so configured.
Proper support for this PHY is restored by providing a phy_driver that
declares MMD operations as unsupported by using the helper functions
provided for that purpose, while remaining otherwise identical to
genphy_driver.
Fixes: 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()")
Reported-by: Russell Senior <russell@personaltelco.net>
Closes: https://github.com/openwrt/openwrt/issues/15981
Link: https://github.com/openwrt/openwrt/issues/15739
Signed-off-by: Mark Mentovai <mark@mentovai.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RISC-V architecture makes a real time counter CSR (via RDTIME
instruction) available for applications in U-mode but there is no
architected mechanism for an application to discover the frequency
the counter is running at. Some applications (e.g., DPDK) use the
time counter for basic performance analysis as well as fine grained
time-keeping.
Add support to the hwprobe system call to export the time CSR
frequency to code running in U-mode.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Punit Agrawal <punit.agrawal@bytedance.com>
Link: https://lore.kernel.org/r/20240702033731.71955-2-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This harmonizes all virtual addressing modes which can now all map
(PGDIR_SIZE * PTRS_PER_PGD) / 4 of physical memory.
The RISCV implementation of KASAN requires that the boundary between
shallow mappings are aligned on an 8G boundary. In this case we need
VMALLOC_START to be 8G aligned. So although we only need to move the
start of the linear mapping down by 4GiB to allow 128GiB to be mapped,
we actually move it down by 8GiB (creating a 4GiB hole between the
linear mapping and KASAN shadow space) to maintain the alignment
requirement.
Signed-off-by: Stuart Menefy <stuart.menefy@codasip.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240630110550.1731929-1-stuart.menefy@codasip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This series adds support for ACPI PPTT via cacheinfo.
* b4-shazam-merge:
RISC-V: Select ACPI PPTT drivers
riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
Link: https://lore.kernel.org/r/20240617131425.7526-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Sia Jee Heng <jeeheng.sia@starfivetech.com> says:
The ACPI SPCR code has been used to enable console output for ARM64 and
X86. The same code can be reused for RISC-V. Furthermore, SPCR table is
mandated for headless system as outlined in the RISC-V BRS
Specification, chapter 6.
* b4-shazam-merge:
RISC-V: ACPI: Enable SPCR table for console output on RISC-V
Link: https://lore.kernel.org/r/20240502073751.102093-1-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add support for the stackleak feature. Whenever the kernel returns to user
space the kernel stack is filled with a poison value.
At the same time, disables the plugin in EFI stub code because EFI stub
is out of scope for the protection.
Tested on qemu and milkv duo:
/ # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
[ 38.675575] lkdtm: Performing direct entry STACKLEAK_ERASING
[ 38.678448] lkdtm: stackleak stack usage:
[ 38.678448] high offset: 288 bytes
[ 38.678448] current: 496 bytes
[ 38.678448] lowest: 1328 bytes
[ 38.678448] tracked: 1328 bytes
[ 38.678448] untracked: 448 bytes
[ 38.678448] poisoned: 14312 bytes
[ 38.678448] low offset: 8 bytes
[ 38.689887] lkdtm: OK: the rest of the thread stack is properly erased
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240623235316.2010-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Many CPUs implement return address branch prediction as a stack. The
RISCV architecture refers to this as a return address stack (RAS). If
this gets corrupted then the CPU will mispredict at least one but
potentally many function returns.
There are two issues with the current RISCV exception code:
- We are using the alternate link stack (x5/t0) for the indirect branch
which makes the hardware think this is a function return. This will
corrupt the RAS.
- We modify the return address of handle_exception to point to
ret_from_exception. This will also corrupt the RAS.
Testing the null system call latency before and after the patch:
Visionfive2 (StarFive JH7110 / U74)
baseline: 189.87 ns
patched: 176.76 ns
Lichee pi 4a (T-Head TH1520 / C910)
baseline: 666.58 ns
patched: 636.90 ns
Just over 7% on the U74 and just over 4% on the C910.
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Signed-off-by: Cyril Bur <cyrilbur@tenstorrent.com>
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20240607061335.2197383-1-cyrilbur@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add header file for generic I3C flags to avoid hard code in dts file.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <frank.li@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240715225351.3237284-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This code has a typo so it returns positive EIO instead of negative -EIO. Fix
it!
Fixes: a7809cb368b9 ("i3c: master: svc: Improve DAA STOP handle code logic")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/e017edfc-da64-496b-8516-958bec27cd9a@stanley.mountain
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Improve the visibility of i3c_bus_type to facilitate searching for
i3c devices attached to the i3c bus. Enable other drivers to use
bus_register_notifier to monitor i3c bus device events.
Signed-off-by: Bhoomik Gupta <bhoomik.gupta@nxp.com>
Link: https://lore.kernel.org/r/20240708053835.3003986-1-bhoomik.gupta@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for runtime and system power management.
Handle clocks, resets, pads as part of suspend and resume.
Restore controller registers that could be lost due to suspend.
Finally add get and put calls appropriately in functions which
access controller : bus_init, do_daa, send_ccc_cmd, priv_xfers,
i2c_xfers, ibi and hot-join.
Signed-off-by: Aniket <aniketmaurya@google.com>
Link: https://lore.kernel.org/r/20240708062103.3296587-4-aniketmaurya@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Separate logic for setting intr/thld registers in a func.
Also modify enable function to take care of setting all fields in DEVICE_CTRL.
These functions can be reused later for power management.
Signed-off-by: Aniket <aniketmaurya@google.com>
Link: https://lore.kernel.org/r/20240708062103.3296587-3-aniketmaurya@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add variables to store timing registers and other values.
These variables would be later used to restore registers
during resume without recomputation.
Signed-off-by: Aniket <aniketmaurya@google.com>
Link: https://lore.kernel.org/r/20240708062103.3296587-2-aniketmaurya@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The REQUEST_PROC_DAA command behaves differently from other commands.
Sometimes the hardware can auto emit STOP, but in other conditions, it
cannot.
Improves the code logic to better handle these situations.
Hardware can auto emit STOP only when the following conditions are met:
- The previous I3C device correctly returns a PID and ACKs an I3C address.
- A NACK is received when emitting 7E to try to get the next I3C device's
PID.
In all other cases, a manual STOP emission is needed.
The code is changed to emit STOP when break the while loop and 'return 0'
only when the hardware can auto emit STOP.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240702223107.403057-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Move to "enabled" variant of clk_get API. It takes care
of enable and disable calls during the probe and remove.
Signed-off-by: Aniket <aniketmaurya@google.com>
Link: https://lore.kernel.org/r/20240628154603.326075-1-aniketmaurya@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The dma.c: hci_dma_init() sets the CHUNK_SIZE field in the IBI_SETUP
register incorrectly if the calculated ibi_chunk_sz is not exactly
2^(n+2) bytes, where n is 0..6.
Fix this by rounding the chunk size up to nearest 2^(n+2) bytes.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20240628131559.502822-4-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Definitely condition dma_get_cache_alignment * defined value > 256
during driver initialization is not reason to BUG_ON(). Turn that to
graceful error out with -EINVAL.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20240628131559.502822-3-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
IBI Status and Data Ring base address registers are not set so HW
obviously cannot update those rings after In-Band Interrupt.
Set them to already allocated and mapped ring addresses.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20240628131559.502822-2-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Rather than having own lo32()/hi32() helpers for dealing with 32-bit and
64-bit build targets switch to generic lower_32_bits()/upper_32_bits()
helpers.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20240628131559.502822-1-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Since DW I3C IP master role always supports IBI, we don't need
to keep two variants of master ops and select one using this
property. Hence remove the code.
Signed-off-by: Aniket <aniketmaurya@google.com>
Link: https://lore.kernel.org/r/20240627034119.3938050-1-aniketmaurya@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
IBI_SIR_REQ_REJECT register is not present if the IP has
IC_HAS_IBI_DATA = 1 set. So don't rely on doing read-
modify-write op on this register.
Instead maintain a variable to store the sir reject mask
and use it to set IBI_SIR_REQ_REJECT.
Signed-off-by: Aniket <aniketmaurya@google.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
I was wrong about the TABLE_SIZE field description in the
commit 0676bfebf576 ("i3c: mipi-i3c-hci: Fix DAT/DCT entry sizes").
For the MIPI I3C HCI versions 1.0 and earlier the TABLE_SIZE field in
the registers DAT_SECTION_OFFSET and DCT_SECTION_OFFSET is indeed defined
in DWORDs and not number of entries like it is defined in later versions.
Where above fix allowed driver initialization to continue the wrongly
interpreted TABLE_SIZE field leads variables DAT_entries being twice and
DCT_entries four times as big as they really are.
That in turn leads clearing the DAT table over the boundary in the
dat_v1.c: hci_dat_v1_init().
So interprete the TABLE_SIZE field in DWORDs for HCI versions < 1.1 and
fix number of DAT/DCT entries accordingly.
Fixes: 0676bfebf576 ("i3c: mipi-i3c-hci: Fix DAT/DCT entry sizes")
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
According to I3C Spec 1.1.1, 11-Jun-2021, section: 5.1.2.2.3:
If the Controller chooses to start an I3C Message with an I3C Dynamic
Address, then special provisions shall be made because that same I3C Target
may be initiating an IBI or a Controller Role Request. So, one of three
things may happen: (skip 1, 2)
3. The Addresses match and the RnW bits also match, and so neither
Controller nor Target will ACK since both are expecting the other side to
provide ACK. As a result, each side might think it had "won" arbitration,
but neither side would continue, as each would subsequently see that the
other did not provide ACK.
...
For either value of RnW: Due to the NACK, the Controller shall defer the
Private Write or Private Read, and should typically transmit the Target
^^^^^^^^^^^^^^^^^^^
Address again after a Repeated START (i.e., the next one or any one prior
^^^^^^^^^^^^^
to a STOP in the Frame). Since the Address Header following a Repeated
START is not arbitrated, the Controller will always win (see Section
5.1.2.2.4).
Resend target address again if address is not 7E and controller get NACK.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
FS_IOC_GETFSSYSFSPATH ioctl exposes /sys/fs path of a given filesystem,
potentially standarizing sysfs reporting. This patch add support for
FS_IOC_GETFSSYSFSPATH for erofs, "erofs/<dev>" will be outputted for bdev
cases, "erofs/[domain_id,]<fs_id>" will be outputted for fscache cases.
Signed-off-by: Huang Xiaojia <huangxiaojia2@huawei.com>
Link: https://lore.kernel.org/r/20240720082335.441563-1-huangxiaojia2@huawei.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Add support for STATX_DIOALIGN to EROFS, so that direct I/O
alignment restrictions are exposed to userspace in a generic
way.
[Before]
```
./statx_test /mnt/erofs/testfile
statx(/mnt/erofs/testfile) = 0
dio mem align:0
dio offset align:0
```
[After]
```
./statx_test /mnt/erofs/testfile
statx(/mnt/erofs/testfile) = 0
dio mem align:512
dio offset align:512
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240718083243.2485437-1-hsiangkao@linux.alibaba.com
The ext interrupts are enabled when the firmware has been started, but
this may never happen, for example, if the board configuration file is
missing.
When the system is later suspended, the driver unconditionally tries to
disable interrupts, which results in an irq disable imbalance and causes
the driver to spin indefinitely in napi_synchronize().
Make sure that the interrupts have been enabled before attempting to
disable them.
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Cc: stable@vger.kernel.org # 6.3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240709073132.9168-1-johan+linaro@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Individual MLO links connection status is not copied to
EVENT_CONNECT_RESULT data while processing the connect response
information in cfg80211_connect_done(). Due to this failed links
are wrongly indicated with success status in EVENT_CONNECT_RESULT.
To fix this, copy the individual MLO links status to the
EVENT_CONNECT_RESULT data.
Fixes: 53ad07e9823b ("wifi: cfg80211: support reporting failed links")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com
[commit message editorial changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In commit 0d9c2beed116 ("wifi: mac80211: fix monitor channel
with chanctx emulation") I changed mac80211 to always have an
internal monitor_sdata to have something to have the chanctx
bound to.
However, if the driver didn't also have the WANT_MONITOR flag
this would cause mac80211 to allocate it without telling the
driver (which was intentional) but also use it for later APIs
to the driver without it ever having known about it which was
_not_ intentional.
Check through the code and only use the monitor_sdata in the
relevant places (TX, MU-MIMO follow settings, TX power, and
interface iteration) when the WANT_MONITOR flag is set.
Cc: stable@vger.kernel.org
Fixes: 0d9c2beed116 ("wifi: mac80211: fix monitor channel with chanctx emulation")
Reported-by: ZeroBeat <ZeroBeat@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219086
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240725184836.25d334157a8e.I02574086da2c5cf0e18264ce5807db6f14ffd9c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It could lead to error happen because the variable res is not updated if
the call to sr_share_read_word returns an error. In this particular case
error code was returned and res stayed uninitialized. Same issue also
applies to sr_read_reg.
This can be avoided by checking the return value of sr_share_read_word
and sr_read_reg, and propagating the error if the read operation failed.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZqJoDwAKCRAnX84Zoj2+
dkq4AYCDdsvwl6M0oc8FoxyN9FfFUrmCwulm3ANeujcdD/0eu8SkCdCK/WcfjdPK
ndWNUnIBfRP7LpLj7zsEm11cgKUQuSsy52aVazaNWiaRuEn4Rl5uHUumd6Vzfu7T
ufYsMNR60g==
=K/RQ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2024-07-25' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
A single fix for a panel compatible
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240725-frisky-wren-of-tact-f5f504@houat
