mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2024-12-29 17:23:36 +00:00
6dfd0d2cb3
1310747 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Qi Zheng
|
6dfd0d2cb3 |
mm: khugepaged: collapse_pte_mapped_thp() use pte_offset_map_rw_nolock()
In collapse_pte_mapped_thp(), we may modify the pte and pmd entry after acquiring the ptl, so convert it to using pte_offset_map_rw_nolock(). At this time, the pte_same() check is not performed after the PTL held. So we should get pgt_pmd and do pmd_same() check after the ptl held. Link: https://lkml.kernel.org/r/055e42db68da00ac8ecab94bd2633c7cd965eb1c.1727332572.git.zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <muchun.song@linux.dev> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Qi Zheng
|
d9c1ddf37b |
mm: handle_pte_fault() use pte_offset_map_rw_nolock()
In handle_pte_fault(), we may modify the vmf->pte after acquiring the vmf->ptl, so convert it to using pte_offset_map_rw_nolock(). But since we will do the pte_same() check, so there is no need to get pmdval to do pmd_same() check, just pass a dummy variable to it. Link: https://lkml.kernel.org/r/af8d694853b44c5a6018403ae435440e275854c7.1727332572.git.zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Muchun Song <muchun.song@linux.dev> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Qi Zheng
|
fc9c45b71f |
arm: adjust_pte() use pte_offset_map_rw_nolock()
In do_adjust_pte(), we may modify the pte entry. The corresponding pmd entry may have been modified concurrently. Therefore, in order to ensure the stability if pmd entry, use pte_offset_map_rw_nolock() to replace pte_offset_map_nolock(), and do pmd_same() check after holding the PTL. All callers of update_mmu_cache_range() hold the vmf->ptl, so we can determined whether split PTE locks is being used by doing the following, just as we do elsewhere in the kernel. ptl != vmf->ptl And then we can delete the do_pte_lock() and do_pte_unlock(). Link: https://lkml.kernel.org/r/0eaf6b69aeb2fe35092a633fed12537efe645303.1727332572.git.zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Muchun Song <muchun.song@linux.dev> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Qi Zheng
|
c85507857b |
mm: khugepaged: __collapse_huge_page_swapin() use pte_offset_map_ro_nolock()
In __collapse_huge_page_swapin(), we just use the ptl for pte_same() check in do_swap_page(). In other places, we directly use pte_offset_map_lock(), so convert it to using pte_offset_map_ro_nolock(). Link: https://lkml.kernel.org/r/dc97a6c3cb9ea80cab30c5626eeea79959d93258.1727332572.git.zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Muchun Song <muchun.song@linux.dev> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Qi Zheng
|
bd6ad65ddc |
mm: filemap: filemap_fault_recheck_pte_none() use pte_offset_map_ro_nolock()
In filemap_fault_recheck_pte_none(), we just do pte_none() check, so convert it to using pte_offset_map_ro_nolock(). Link: https://lkml.kernel.org/r/9f7cbbaa772385ced1b8931b67a8b9d246c9b82d.1727332572.git.zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Muchun Song <muchun.song@linux.dev> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Qi Zheng
|
7aefa59899 |
powerpc: assert_pte_locked() use pte_offset_map_ro_nolock()
In assert_pte_locked(), we just get the ptl and assert if it was already held, so convert it to using pte_offset_map_ro_nolock(). Link: https://lkml.kernel.org/r/42559e042eb6fc3129a40f710d671712030646b4.1727332572.git.zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Muchun Song <muchun.song@linux.dev> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Qi Zheng
|
66efef9b1a |
mm: pgtable: introduce pte_offset_map_{ro|rw}_nolock()
Patch series "introduce pte_offset_map_{ro|rw}_nolock()", v5.
As proposed by David Hildenbrand [1], this series introduces the following
two new helper functions to replace pte_offset_map_nolock().
1. pte_offset_map_ro_nolock()
2. pte_offset_map_rw_nolock()
As the name suggests, pte_offset_map_ro_nolock() is used for read-only
case. In this case, only read-only operations will be performed on PTE
page after the PTL is held. The RCU lock in pte_offset_map_nolock() will
ensure that the PTE page will not be freed, and there is no need to worry
about whether the pmd entry is modified. Therefore
pte_offset_map_ro_nolock() is just a renamed version of
pte_offset_map_nolock().
pte_offset_map_rw_nolock() is used for may-write case. In this case, the
pte or pmd entry may be modified after the PTL is held, so we need to
ensure that the pmd entry has not been modified concurrently. So in
addition to the name change, it also outputs the pmdval when successful.
The users should make sure the page table is stable like checking
pte_same() or checking pmd_same() by using the output pmdval before
performing the write operations.
This series will convert all pte_offset_map_nolock() into the above two
helper functions one by one, and finally completely delete it.
This also a preparation for reclaiming the empty user PTE page table
pages.
This patch (of 13):
Currently, the usage of pte_offset_map_nolock() can be divided into the
following two cases:
1) After acquiring PTL, only read-only operations are performed on the PTE
page. In this case, the RCU lock in pte_offset_map_nolock() will ensure
that the PTE page will not be freed, and there is no need to worry
about whether the pmd entry is modified.
2) After acquiring PTL, the pte or pmd entries may be modified. At this
time, we need to ensure that the pmd entry has not been modified
concurrently.
To more clearing distinguish between these two cases, this commit
introduces two new helper functions to replace pte_offset_map_nolock().
For 1), just rename it to pte_offset_map_ro_nolock(). For 2), in addition
to changing the name to pte_offset_map_rw_nolock(), it also outputs the
pmdval when successful. It is applicable for may-write cases where any
modification operations to the page table may happen after the
corresponding spinlock is held afterwards. But the users should make sure
the page table is stable like checking pte_same() or checking pmd_same()
by using the output pmdval before performing the write operations.
Note: "RO" / "RW" expresses the intended semantics, not that the *kmap*
will be read-only/read-write protected.
Subsequent commits will convert pte_offset_map_nolock() into the above
two functions one by one, and finally completely delete it.
Link: https://lkml.kernel.org/r/cover.1727332572.git.zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/5aeecfa131600a454b1f3a038a1a54282ca3b856.1727332572.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Nanyong Sun
|
f2f484085e |
mm: move mm flags to mm_types.h
The types of mm flags are now far beyond the core dump related features. This patch moves mm flags from linux/sched/coredump.h to linux/mm_types.h. The linux/sched/coredump.h has include the mm_types.h, so the C files related to coredump does not need to change head file inclusion. In addition, the inclusion of sched/coredump.h now can be deleted from the C files that irrelevant to core dump. Link: https://lkml.kernel.org/r/20240926074922.2721274-1-sunnanyong@huawei.com Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Lorenzo Stoakes
|
021781b012 |
mm/madvise: unrestrict process_madvise() for current process
The process_madvise() call was introduced in commit |
||
|
David Hildenbrand
|
f33cea94e3 |
selftests/mm: hugetlb_fault_after_madv: improve test output
Let's improve the test output. For example, print the proper test result. Install a SIGBUS handler to catch any SIGBUS instead of crashing the test on failure. With unsuitable hugetlb page count: $ ./hugetlb_fault_after_madv TAP version 13 1..1 # [INFO] detected default hugetlb page size: 2048 KiB ok 2 # SKIP This test needs one and only one page to execute. Got 0 # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0 On a failure: $ ./hugetlb_fault_after_madv TAP version 13 1..1 not ok 1 SIGBUS behavior Bail out! 1 out of 1 tests failed On success: $ ./hugetlb_fault_after_madv TAP version 13 1..1 # [INFO] detected default hugetlb page size: 2048 KiB ok 1 SIGBUS behavior # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 Link: https://lkml.kernel.org/r/20240926152044.2205129-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Breno Leitao <leitao@debian.org> Tested-by: Mario Casquero <mcasquer@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
David Hildenbrand
|
3b2faed068 |
selftests/mm: hugetlb_fault_after_madv: use default hugetlb page size
Patch series "selftests/mm: hugetlb_fault_after_madv improvements". Mario brought to my attention that the hugetlb_fault_after_madv test is currently always skipped on s390x. Let's adjust the test to be independent of the default hugetlb page size and while at it, also improve the test output. This patch (of 2): We currently assume that the hugetlb page size is 2 MiB, which is why we mmap() a 2 MiB range. Is the default hugetlb size is larger, mmap() will fail because the range is not suitable. If the default hugetlb size is smaller (e.g., s390x), mmap() will fail because we would need more than one hugetlb page, but just asserted that we have exactly one. So let's simply use the default hugetlb page size instead of hard-coded 2 MiB, so the test isn't unconditionally skipped on architectures like s390x. Before this patch on s390x: $ ./hugetlb_fault_after_madv 1..0 # SKIP Failed to allocated huge page With this change on s390x: $ ./hugetlb_fault_after_madv While at it, make "huge_ptr" static. Link: https://lkml.kernel.org/r/20240926152044.2205129-1-david@redhat.com Link: https://lkml.kernel.org/r/20240926152044.2205129-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Mario Casquero <mcasquer@redhat.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Breno Leitao <leitao@debian.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Tanya Agarwal
|
1cd1a4e71b |
mm/mempolicy: fix comments for better documentation
Fix typo in mempolicy.h and Correct the number of allowed memory policy Link: https://lkml.kernel.org/r/20240926183516.4034-2-tanyaagarwal25699@gmail.com Signed-off-by: Tanya Agarwal <tanyaagarwal25699@gmail.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Cc: Anup Sharma <anupnewsmail@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Zhiguo Jiang
|
bbc251f30e |
mm: fix shrink nr.unqueued_dirty counter issue
It is needed to ensure sc->nr.unqueued_dirty > 0, which can avoid setting PGDAT_DIRTY flag when sc->nr.unqueued_dirty and sc->nr.file_taken are both zero. Link: https://lkml.kernel.org/r/20240112012353.1387-1-justinjiang@vivo.com Signed-off-by: Zhiguo Jiang <justinjiang@vivo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Wei Yang
|
5059aa6334 |
maple_tree: memset maple_big_node as a whole
In mast_fill_bnode(), we first clear some fields of maple_big_node and set the 'type' unconditionally before return. This means we won't leverage any information in maple_big_node and it is safe to clear the whole structure. In maple_big_node, we define slot and padding/gap in a union. And based on current definition of MAPLE_BIG_NODE_SLOTS/GAPS, padding is always less than slot and part of the gap is overlapped by slot. For example on 64bit system: MAPLE_BIG_NODE_SLOT is 34 MAPLE_BIG_NODE_GAP is 21 With this knowledge, current code may clear some space by twice. And this could be avoid by clearing the structure as a whole. Link: https://lkml.kernel.org/r/20240908140554.20378-3-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Wei Yang
|
f36ba81081 |
maple_tree: remove maple_big_node.parent
Patch series "Reduce the space to be cleared for maple_big_node", v2. Found current code may clear maple_big_node redundantly. First we define a field parent, which is never used. After removing this, we reduce the size of memory to be cleared by memset. Then mast_fill_bnode() clears part of the structure twice, since slot and gap share some space. By clearing the whole structure, we can avoid this. This patch (of 2): The member parent of maple_big_node is never used. Let's remove it which could reduce the number of space to be cleared on memset. Link: https://lkml.kernel.org/r/20240908140554.20378-1-richard.weiyang@gmail.com Link: https://lkml.kernel.org/r/20240908140554.20378-2-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Wei Yang
|
1c148069b2 |
maple_tree: goto complete directly on a pivot of 0
When we break the loop after assigning a pivot, the index i/j is not changed. Then the following code assign pivot, which means we do the assignment with same i/j by mas_safe_pivot. Since the loop condition is (i < piv_end), from which we can get i is less than mt_pivots[mt]. It implies mas_safe_pivot() return pivot[i] which is the same value we get in loop. Now we can conclude it does a redundant assignment on a pivot of 0. Let's just go to complete to avoid it. Link: https://lkml.kernel.org/r/20240911142759.20989-3-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Wei Yang
|
8c7904a8cd |
maple_tree: i is always less than or equal to mas_end
Patch series "refine mas_mab_cp()".
By analysis of the code, one condition check can be removed and one case
would hit a redundant assignment.
This patch (of 2):
mas_mab_cp() copy range [mas_start, mas_end] inclusively from a
maple_node to maple_big_node. This implies mas_start <= mas_end.
Based on the relationship of mas_start and mas_end, we can have the
following four cases:
| mas_start == mas_end | mas_start < mas_end
---------------+----------------------+----------------------
mas_start == 0 | 1 | 2
---------------+----------------------+----------------------
mas_start != 0 | 3 | 4
We can see in all these four cases, i is always less than or equal to
mas_end after finish the loop:
Case 1: After assign pivot 0, i is set to 1, which is bigger than
mas_end 0. So it jumps to complete and skip the check.
Case 2: After assign pivot 0, i is set to 1.
∵ (mas_start < mas_end) && (mas_start == 0)
==> (1 <= mas_end)
∵ (i == 1) && (1 <= mas_end)
==> (i <= mas_end)
∴ Before loop, we have (i <= mas_end). And we still hold this
if it skips the loop. For example, (i == mas_end).
Now let's see what happens in the loop:
∵ piv_end = min(mas_end, mt_pivots[mt])
==> (piv_end <= mas_end)
∵ loop condition is (i < piv_end)
==> (i <= piv_end) on finish the loop both normally or break
∵ (i <= piv_end) && (piv_end <= mas_end)
==> (i <= mas_end)
∴ After loop, we still get (i <= mas_end) in this case
Case 3: This case would skip both if clause and loop. So when it comes
to the check, i is still mas_start which equals to mas_end.
Case 4: This case would skip the if clause.
∵ (mas_start < mas_end) && (i == mas_start)
==> (i < mas_end)
∴ Before loop, we have (i < mas_end).
The loop process is similar with Case 2, so we get the same
result.
Now we can conclude in all cases, we get (i <= mas_end) when doing
check. Then it is not necessary to do the check.
Link: https://lkml.kernel.org/r/20240911142759.20989-1-richard.weiyang@gmail.com
Link: https://lkml.kernel.org/r/20240911142759.20989-2-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Lorenzo Stoakes
|
cd3f8467af |
mm: refactor mm_access() to not return NULL
mm_access() can return NULL if the mm is not found, but this is handled the same as an error in all callers, with some translating this into an -ESRCH error. Only proc_mem_open() returns NULL if no mm is found, however in this case it is clearer and makes more sense to explicitly handle the error. Additionally we take the opportunity to refactor the function to eliminate unnecessary nesting. Simplify things by simply returning -ESRCH if no mm is found - this both eliminates confusing use of the IS_ERR_OR_NULL() macro, and simplifies callers which would return -ESRCH by returning this error directly. [lorenzo.stoakes@oracle.com: prefer neater pointer error comparison] Link: https://lkml.kernel.org/r/2fae1834-749a-45e1-8594-5e5979cf7103@lucifer.local Link: https://lkml.kernel.org/r/20240924201023.193135-1-lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sergey Senozhatsky
|
5e99893444 |
zram: remove UNDER_WB and simplify writeback
We now have only one active post-processing at any time, so we don't have same race conditions that we had before. If slot selected for post-processing gets freed or freed and reallocated it loses its PP_SLOT flag and there is no way for such a slot to gain PP_SLOT flag again until current post-processing terminates. Link: https://lkml.kernel.org/r/20240917021020.883356-8-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sergey Senozhatsky
|
1a1d0f8992 |
zram: reshuffle zram_free_page() flags operations
Drop some redundant zram_test_flag() calls and re-order zram_clear_flag() calls. Plus two small trivial coding style fixes. No functional changes. Link: https://lkml.kernel.org/r/20240917021020.883356-7-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sergey Senozhatsky
|
b967fa1ba7 |
zram: do not mark idle slots that cannot be idle
ZRAM_SAME slots cannot be post-processed (writeback or recompress) so do not mark them ZRAM_IDLE. Same with ZRAM_WB slots, they cannot be ZRAM_IDLE because they are not in zsmalloc pool anymore. Link: https://lkml.kernel.org/r/20240917021020.883356-6-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sergey Senozhatsky
|
330edc2bc0 |
zram: rework writeback target selection strategy
Writeback suffers from the same problem as recompression did before - target slot selection for writeback is just a simple iteration over zram->table entries (stored pages) which selects suboptimal targets for writeback. This is especially problematic for writeback, because we uncompress objects before writeback so each of them takes 4K out of limited writeback storage. For example, when we take a 48 bytes slot and store it as a 4K object to writeback device we only save 48 bytes of memory (release from zsmalloc pool). We naturally want to pick the largest objects for writeback, because then each writeback will release the largest amount of memory. This patch applies the same solution and strategy as for recompression target selection: pp control (post-process) with 16 buckets of candidate pp slots. Slots are assigned to pp buckets based on sizes - the larger the slot the higher the group index. This gives us sorted by size lists of candidate slots (in linear time), so that among post-processing candidate slots we always select the largest ones first and maximize the memory saving. TEST ==== A very simple demonstration: zram is configured with a writeback device. A limited writeback (wb_limit 2500 pages) is performed then, with a log of sizes of slots that were written back. You can see that patched zram selects slots for recompression in significantly different manner, which leads to higher memory savings (see column #2 of mm_stat output). BASE ---- *** initial state of zram device /sys/block/zram0/mm_stat 1750327296 619765836 631902208 0 631902208 1 0 34278 34278 *** writeback idle wb_limit 2500 /sys/block/zram0/mm_stat 1750327296 617622333 631578624 0 631902208 1 0 34278 34278 Sizes of selected objects for writeback: ... 193 349 46 46 46 46 852 1002 543 162 107 49 34 34 34 ... PATCHED ------- *** initial state of zram device /sys/block/zram0/mm_stat 1750319104 619760957 631992320 0 631992320 1 0 34278 34278 *** writeback idle wb_limit 2500 /sys/block/zram0/mm_stat 1750319104 612672056 626135040 0 631992320 1 0 34278 34278 Sizes of selected objects for writeback: ... 3667 3580 3581 3580 3581 3581 3581 3231 3211 3203 3231 3246 ... Note, pp-slots are not strictly sorted, there is a PP_BUCKET_SIZE_RANGE variation of sizes within particular bucket. Link: https://lkml.kernel.org/r/20240917021020.883356-5-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sergey Senozhatsky
|
3f909a60ce |
zram: rework recompress target selection strategy
Target slot selection for recompression is just a simple iteration over zram->table entries (stored pages) from slot 0 to max slot. Given that zram->table slots are written in random order and are not sorted by size, a simple iteration over slots selects suboptimal targets for recompression. This is not a problem if we recompress every single zram->table slot, but we never do that in reality. In reality we limit the number of slots we can recompress (via max_pages parameter) and hence proper slot selection becomes very important. The strategy is quite simple, suppose we have two candidate slots for recompression, one of size 48 bytes and one of size 2800 bytes, and we can recompress only one, then it certainly makes more sense to pick 2800 entry for recompression. Because even if we manage to compress 48 bytes objects even further the savings are going to be very small. Potential savings after good re-compression of 2800 bytes objects are much higher. This patch reworks slot selection and introduces the strategy described above: among candidate slots always select the biggest ones first. For that the patch introduces zram_pp_ctl (post-processing) structure which holds NUM_PP_BUCKETS pp buckets of slots. Slots are assigned to a particular group based on their sizes - the larger the size of the slot the higher the group index. This, basically, sorts slots by size in liner time (we still perform just one iteration over zram->table slots). When we select slot for recompression we always first lookup in higher pp buckets (those that hold the largest slots). Which achieves the desired behavior. TEST ==== A very simple demonstration: zram is configured with zstd, and zstd with dict as a recompression stream. A limited (max 4096 pages) recompression is performed then, with a log of sizes of slots that were recompressed. You can see that patched zram selects slots for recompression in significantly different manner, which leads to higher memory savings (see column #2 of mm_stat output). BASE ---- *** initial state of zram device /sys/block/zram0/mm_stat 1750994944 504491413 514203648 0 514203648 1 0 34204 34204 *** recompress idle max_pages=4096 /sys/block/zram0/mm_stat 1750994944 504262229 514953216 0 514203648 1 0 34204 34204 Sizes of selected objects for recompression: ... 45 58 24 226 91 40 24 24 24 424 2104 93 2078 2078 2078 959 154 ... PATCHED ------- *** initial state of zram device /sys/block/zram0/mm_stat 1750982656 504492801 514170880 0 514170880 1 0 34204 34204 *** recompress idle max_pages=4096 /sys/block/zram0/mm_stat 1750982656 503716710 517586944 0 514170880 1 0 34204 34204 Sizes of selected objects for recompression: ... 3680 3694 3667 3590 3614 3553 3537 3548 3550 3542 3543 3537 ... Note, pp-slots are not strictly sorted, there is a PP_BUCKET_SIZE_RANGE variation of sizes within particular bucket. [senozhatsky@chromium.org: do not skip the first bucket] Link: https://lkml.kernel.org/r/20241001085634.1948384-1-senozhatsky@chromium.org Link: https://lkml.kernel.org/r/20240917021020.883356-4-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sergey Senozhatsky
|
58652f2b6d |
zram: permit only one post-processing operation at a time
Both recompress and writeback soon will unlock slots during processing, which makes things too complex wrt possible race-conditions. We still want to clear PP_SLOT in slot_free, because this is how we figure out that slot that was selected for post-processing has been released under us and when we start post-processing we check if slot still has PP_SLOT set. At the same time, theoretically, we can have something like this: CPU0 CPU1 recompress scan slots set PP_SLOT unlock slot slot_free clear PP_SLOT allocate PP_SLOT writeback scan slots set PP_SLOT unlock slot select PP-slot test PP_SLOT So recompress will not detect that slot has been re-used and re-selected for concurrent writeback post-processing. Make sure that we only permit on post-processing operation at a time. So now recompress and writeback post-processing don't race against each other, we only need to handle slot re-use (slot_free and write), which is handled individually by each pp operation. Having recompress and writeback competing for the same slots is not exactly good anyway (can't imagine anyone doing that). Link: https://lkml.kernel.org/r/20240917021020.883356-3-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Sergey Senozhatsky
|
bf779fb9af |
zram: introduce ZRAM_PP_SLOT flag
Patch series "zram: optimal post-processing target selection", v5. Problem: -------- Both recompression and writeback perform a very simple linear scan of all zram slots in search for post-processing (writeback or recompress) candidate slots. This often means that we pick the worst candidate for pp (post-processing), e.g. a 48 bytes object for writeback, which is nearly useless, because it only releases 48 bytes from zsmalloc pool, but consumes an entire 4K slot in the backing device. Similarly, recompression of an 48 bytes objects is unlikely to save more memory that recompression of a 3000 bytes object. Both recompression and writeback consume constrained resources (CPU time, batter, backing device storage space) and quite often have a (daily) limit on the number of items they post-process, so we should utilize those constrained resources in the most optimal way. Solution: --------- This patch reworks the way we select pp targets. We, quite clearly, want to sort all the candidates and always pick the largest, be it recompression or writeback. Especially for writeback, because the larger object we writeback the more memory we release. This series introduces concept of pp buckets and pp scan/selection. The scan step is a simple iteration over all zram->table entries, just like what we currently do, but we don't post-process a candidate slot immediately. Instead we assign it to a PP (post-processing) bucket. PP bucket is, basically, a list which holds pp candidate slots that belong to the same size class. PP buckets are 64 bytes apart, slots are not strictly sorted within a bucket there is a 64 bytes variance. The select step simply iterates over pp buckets from highest to lowest and picks all candidate slots a particular buckets contains. So this gives us sorted candidates (in linear time) and allows us to select most optimal (largest) candidates for post-processing first. This patch (of 7): This flag indicates that the slot was selected as a candidate slot for post-processing (pp) and was assigned to a pp bucket. It does not necessarily mean that the slot is currently under post-processing, but may mean so. The slot can loose its PP_SLOT flag, while still being in the pp-bucket, if it's accessed or slot_free-ed. Link: https://lkml.kernel.org/r/20240917021020.883356-1-senozhatsky@chromium.org Link: https://lkml.kernel.org/r/20240917021020.883356-2-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Adrian Huang
|
9e9e085eff |
mm/vmalloc: combine all TLB flush operations of KASAN shadow virtual address into one operation
When compiling kernel source 'make -j $(nproc)' with the up-and-running
KASAN-enabled kernel on a 256-core machine, the following soft lockup is
shown:
watchdog: BUG: soft lockup - CPU#28 stuck for 22s! [kworker/28:1:1760]
CPU: 28 PID: 1760 Comm: kworker/28:1 Kdump: loaded Not tainted 6.10.0-rc5 #95
Workqueue: events drain_vmap_area_work
RIP: 0010:smp_call_function_many_cond+0x1d8/0xbb0
Code: 38 c8 7c 08 84 c9 0f 85 49 08 00 00 8b 45 08 a8 01 74 2e 48 89 f1 49 89 f7 48 c1 e9 03 41 83 e7 07 4c 01 e9 41 83 c7 03 f3 90 <0f> b6 01 41 38 c7 7c 08 84 c0 0f 85 d4 06 00 00 8b 45 08 a8 01 75
RSP: 0018:ffffc9000cb3fb60 EFLAGS: 00000202
RAX: 0000000000000011 RBX: ffff8883bc4469c0 RCX: ffffed10776e9949
RDX: 0000000000000002 RSI: ffff8883bb74ca48 RDI: ffffffff8434dc50
RBP: ffff8883bb74ca40 R08: ffff888103585dc0 R09: ffff8884533a1800
R10: 0000000000000004 R11: ffffffffffffffff R12: ffffed1077888d39
R13: dffffc0000000000 R14: ffffed1077888d38 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff8883bc400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005577b5c8d158 CR3: 0000000004850000 CR4: 0000000000350ef0
Call Trace:
<IRQ>
? watchdog_timer_fn+0x2cd/0x390
? __pfx_watchdog_timer_fn+0x10/0x10
? __hrtimer_run_queues+0x300/0x6d0
? sched_clock_cpu+0x69/0x4e0
? __pfx___hrtimer_run_queues+0x10/0x10
? srso_return_thunk+0x5/0x5f
? ktime_get_update_offsets_now+0x7f/0x2a0
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? hrtimer_interrupt+0x2ca/0x760
? __sysvec_apic_timer_interrupt+0x8c/0x2b0
? sysvec_apic_timer_interrupt+0x6a/0x90
</IRQ>
<TASK>
? asm_sysvec_apic_timer_interrupt+0x16/0x20
? smp_call_function_many_cond+0x1d8/0xbb0
? __pfx_do_kernel_range_flush+0x10/0x10
on_each_cpu_cond_mask+0x20/0x40
flush_tlb_kernel_range+0x19b/0x250
? srso_return_thunk+0x5/0x5f
? kasan_release_vmalloc+0xa7/0xc0
purge_vmap_node+0x357/0x820
? __pfx_purge_vmap_node+0x10/0x10
__purge_vmap_area_lazy+0x5b8/0xa10
drain_vmap_area_work+0x21/0x30
process_one_work+0x661/0x10b0
worker_thread+0x844/0x10e0
? srso_return_thunk+0x5/0x5f
? __kthread_parkme+0x82/0x140
? __pfx_worker_thread+0x10/0x10
kthread+0x2a5/0x370
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Debugging Analysis:
1. The following ftrace log shows that the lockup CPU spends too much
time iterating vmap_nodes and flushing TLB when purging vm_area
structures. (Some info is trimmed).
kworker: funcgraph_entry: | drain_vmap_area_work() {
kworker: funcgraph_entry: | mutex_lock() {
kworker: funcgraph_entry: 1.092 us | __cond_resched();
kworker: funcgraph_exit: 3.306 us | }
... ...
kworker: funcgraph_entry: | flush_tlb_kernel_range() {
... ...
kworker: funcgraph_exit: # 7533.649 us | }
... ...
kworker: funcgraph_entry: 2.344 us | mutex_unlock();
kworker: funcgraph_exit: $ 23871554 us | }
The drain_vmap_area_work() spends over 23 seconds.
There are 2805 flush_tlb_kernel_range() calls in the ftrace log.
* One is called in __purge_vmap_area_lazy().
* Others are called by purge_vmap_node->kasan_release_vmalloc.
purge_vmap_node() iteratively releases kasan vmalloc
allocations and flushes TLB for each vmap_area.
- [Rough calculation] Each flush_tlb_kernel_range() runs
about 7.5ms.
-- 2804 * 7.5ms = 21.03 seconds.
-- That's why a soft lock is triggered.
2. Extending the soft lockup time can work around the issue (For example,
# echo 60 > /proc/sys/kernel/watchdog_thresh). This confirms the
above-mentioned speculation: drain_vmap_area_work() spends too much
time.
If we combine all TLB flush operations of the KASAN shadow virtual
address into one operation in the call path
'purge_vmap_node()->kasan_release_vmalloc()', the running time of
drain_vmap_area_work() can be saved greatly. The idea is from the
flush_tlb_kernel_range() call in __purge_vmap_area_lazy(). And, the
soft lockup won't be triggered.
Here is the test result based on 6.10:
[6.10 wo/ the patch]
1. ftrace latency profiling (record a trace if the latency > 20s).
echo 20000000 > /sys/kernel/debug/tracing/tracing_thresh
echo drain_vmap_area_work > /sys/kernel/debug/tracing/set_graph_function
echo function_graph > /sys/kernel/debug/tracing/current_tracer
echo 1 > /sys/kernel/debug/tracing/tracing_on
2. Run `make -j $(nproc)` to compile the kernel source
3. Once the soft lockup is reproduced, check the ftrace log:
cat /sys/kernel/debug/tracing/trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
76) $ 50412985 us | } /* __purge_vmap_area_lazy */
76) $ 50412997 us | } /* drain_vmap_area_work */
76) $ 29165911 us | } /* __purge_vmap_area_lazy */
76) $ 29165926 us | } /* drain_vmap_area_work */
91) $ 53629423 us | } /* __purge_vmap_area_lazy */
91) $ 53629434 us | } /* drain_vmap_area_work */
91) $ 28121014 us | } /* __purge_vmap_area_lazy */
91) $ 28121026 us | } /* drain_vmap_area_work */
[6.10 w/ the patch]
1. Repeat step 1-2 in "[6.10 wo/ the patch]"
2. The soft lockup is not triggered and ftrace log is empty.
cat /sys/kernel/debug/tracing/trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
3. Setting 'tracing_thresh' to 10/5 seconds does not get any ftrace
log.
4. Setting 'tracing_thresh' to 1 second gets ftrace log.
cat /sys/kernel/debug/tracing/trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
23) $ 1074942 us | } /* __purge_vmap_area_lazy */
23) $ 1074950 us | } /* drain_vmap_area_work */
The worst execution time of drain_vmap_area_work() is about 1 second.
Link: https://lore.kernel.org/lkml/ZqFlawuVnOMY2k3E@pc638.lan/
Link: https://lkml.kernel.org/r/20240726165246.31326-1-ahuang12@lenovo.com
Fixes:
|
||
|
Jingxiang Zeng
|
15ff4d409e |
mm/memcontrol: add per-memcg pgpgin/pswpin counter
In proactive memory reclamation scenarios, it is necessary to estimate the pswpin and pswpout metrics of the cgroup to determine whether to continue reclaiming anonymous pages in the current batch. This patch will collect these metrics and expose them. [linuszeng@tencent.com: v2] Link: https://lkml.kernel.org/r/20240830082244.156923-1-jingxiangzeng.cas@gmail.com Li nk: https://lkml.kernel.org/r/20240913084453.3605621-1-jingxiangzeng.cas@gmail.com Link: https://lkml.kernel.org/r/20240830082244.156923-1-jingxiangzeng.cas@gmail.com Signed-off-by: Jingxiang Zeng <linuszeng@tencent.com> Acked-by: Nhat Pham <nphamcs@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Leo Stone
|
ba7196e566 |
mm/damon: fix sparse warning for zero initializer
sparse warns about zero initializing an array with {0,}, change it to
the equivalent {0}.
Fixes the sparse warning:
mm/damon/tests/vaddr-kunit.h:69:47: warning: missing braces around initializer
Link: https://lkml.kernel.org/r/xriwklcwjpwcz7eiavo6f7envdar4jychhsk6sfkj5klaznb6b@j6vrvr2sxjht
Fixes:
|
||
|
Baolin Wang
|
d2d243df44 |
mm: shmem: fix khugepaged activation policy for shmem
Shmem has a separate interface (different from anonymous pages) to control huge page allocation, that means shmem THP can be enabled while anonymous THP is disabled. However, in this case, khugepaged will not start to collapse shmem THP, which is unreasonable. To fix this issue, we should call start_stop_khugepaged() to activate or deactivate the khugepaged thread when setting shmem mTHP interfaces. Moreover, add a new helper shmem_hpage_pmd_enabled() to help to check whether shmem THP is enabled, which will determine if khugepaged should be activated. Link: https://lkml.kernel.org/r/9b9c6cbc4499bf44c6455367fd9e0f6036525680.1726978977.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reported-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Lorenzo Stoakes
|
f8f55e9ec7 |
selftests/mm: add pkey_sighandler_xx, hugetlb_dio to .gitignore
Commit |
||
|
Andrew Morton
|
48901e9d62 |
Merge branch 'mm-hotfixes-stable' into mm-stable.
Pick these into mm-stable: |
||
|
Lorenzo Stoakes
|
5de195060b |
mm: resolve faulty mmap_region() error path behaviour
The mmap_region() function is somewhat terrifying, with spaghetti-like
control flow and numerous means by which issues can arise and incomplete
state, memory leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
Taking advantage of previous patches in this series we move a number of
checks earlier in the code, simplifying things by moving the core of the
logic into a static internal function __mmap_region().
Doing this allows us to perform a number of checks up front before we do
any real work, and allows us to unwind the writable unmap check
unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE
validation unconditionally also.
We move a number of things here:
1. We preallocate memory for the iterator before we call the file-backed
memory hook, allowing us to exit early and avoid having to perform
complicated and error-prone close/free logic. We carefully free
iterator state on both success and error paths.
2. The enclosing mmap_region() function handles the mapping_map_writable()
logic early. Previously the logic had the mapping_map_writable() at the
point of mapping a newly allocated file-backed VMA, and a matching
mapping_unmap_writable() on success and error paths.
We now do this unconditionally if this is a file-backed, shared writable
mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however
doing so does not invalidate the seal check we just performed, and we in
any case always decrement the counter in the wrapper.
We perform a debug assert to ensure a driver does not attempt to do the
opposite.
3. We also move arch_validate_flags() up into the mmap_region()
function. This is only relevant on arm64 and sparc64, and the check is
only meaningful for SPARC with ADI enabled. We explicitly add a warning
for this arch if a driver invalidates this check, though the code ought
eventually to be fixed to eliminate the need for this.
With all of these measures in place, we no longer need to explicitly close
the VMA on error paths, as we place all checks which might fail prior to a
call to any driver mmap hook.
This eliminates an entire class of errors, makes the code easier to reason
about and more robust.
Link: https://lkml.kernel.org/r/6e0becb36d2f5472053ac5d544c0edfe9b899e25.1730224667.git.lorenzo.stoakes@oracle.com
Fixes:
|
||
|
Lorenzo Stoakes
|
5baf8b037d |
mm: refactor arch_calc_vm_flag_bits() and arm64 MTE handling
Currently MTE is permitted in two circumstances (desiring to use MTE
having been specified by the VM_MTE flag) - where MAP_ANONYMOUS is
specified, as checked by arch_calc_vm_flag_bits() and actualised by
setting the VM_MTE_ALLOWED flag, or if the file backing the mapping is
shmem, in which case we set VM_MTE_ALLOWED in shmem_mmap() when the mmap
hook is activated in mmap_region().
The function that checks that, if VM_MTE is set, VM_MTE_ALLOWED is also
set is the arm64 implementation of arch_validate_flags().
Unfortunately, we intend to refactor mmap_region() to perform this check
earlier, meaning that in the case of a shmem backing we will not have
invoked shmem_mmap() yet, causing the mapping to fail spuriously.
It is inappropriate to set this architecture-specific flag in general mm
code anyway, so a sensible resolution of this issue is to instead move the
check somewhere else.
We resolve this by setting VM_MTE_ALLOWED much earlier in do_mmap(), via
the arch_calc_vm_flag_bits() call.
This is an appropriate place to do this as we already check for the
MAP_ANONYMOUS case here, and the shmem file case is simply a variant of
the same idea - we permit RAM-backed memory.
This requires a modification to the arch_calc_vm_flag_bits() signature to
pass in a pointer to the struct file associated with the mapping, however
this is not too egregious as this is only used by two architectures anyway
- arm64 and parisc.
So this patch performs this adjustment and removes the unnecessary
assignment of VM_MTE_ALLOWED in shmem_mmap().
[akpm@linux-foundation.org: fix whitespace, per Catalin]
Link: https://lkml.kernel.org/r/ec251b20ba1964fb64cf1607d2ad80c47f3873df.1730224667.git.lorenzo.stoakes@oracle.com
Fixes:
|
||
|
Lorenzo Stoakes
|
0fb4a7ad27 |
mm: refactor map_deny_write_exec()
Refactor the map_deny_write_exec() to not unnecessarily require a VMA
parameter but rather to accept VMA flags parameters, which allows us to
use this function early in mmap_region() in a subsequent commit.
While we're here, we refactor the function to be more readable and add
some additional documentation.
Link: https://lkml.kernel.org/r/6be8bb59cd7c68006ebb006eb9d8dc27104b1f70.1730224667.git.lorenzo.stoakes@oracle.com
Fixes:
|
||
|
Lorenzo Stoakes
|
4080ef1579 |
mm: unconditionally close VMAs on error
Incorrect invocation of VMA callbacks when the VMA is no longer in a
consistent state is bug prone and risky to perform.
With regards to the important vm_ops->close() callback We have gone to
great lengths to try to track whether or not we ought to close VMAs.
Rather than doing so and risking making a mistake somewhere, instead
unconditionally close and reset vma->vm_ops to an empty dummy operations
set with a NULL .close operator.
We introduce a new function to do so - vma_close() - and simplify existing
vms logic which tracked whether we needed to close or not.
This simplifies the logic, avoids incorrect double-calling of the .close()
callback and allows us to update error paths to simply call vma_close()
unconditionally - making VMA closure idempotent.
Link: https://lkml.kernel.org/r/28e89dda96f68c505cb6f8e9fc9b57c3e9f74b42.1730224667.git.lorenzo.stoakes@oracle.com
Fixes:
|
||
|
Lorenzo Stoakes
|
3dd6ed34ce |
mm: avoid unsafe VMA hook invocation when error arises on mmap hook
Patch series "fix error handling in mmap_region() and refactor
(hotfixes)", v4.
mmap_region() is somewhat terrifying, with spaghetti-like control flow and
numerous means by which issues can arise and incomplete state, memory
leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
This series goes to great lengths to simplify how mmap_region() works and
to avoid unwinding errors late on in the process of setting up the VMA for
the new mapping, and equally avoids such operations occurring while the
VMA is in an inconsistent state.
The patches in this series comprise the minimal changes required to
resolve existing issues in mmap_region() error handling, in order that
they can be hotfixed and backported. There is additionally a follow up
series which goes further, separated out from the v1 series and sent and
updated separately.
This patch (of 5):
After an attempted mmap() fails, we are no longer in a situation where we
can safely interact with VMA hooks. This is currently not enforced,
meaning that we need complicated handling to ensure we do not incorrectly
call these hooks.
We can avoid the whole issue by treating the VMA as suspect the moment
that the file->f_ops->mmap() function reports an error by replacing
whatever VMA operations were installed with a dummy empty set of VMA
operations.
We do so through a new helper function internal to mm - mmap_file() -
which is both more logically named than the existing call_mmap() function
and correctly isolates handling of the vm_op reassignment to mm.
All the existing invocations of call_mmap() outside of mm are ultimately
nested within the call_mmap() from mm, which we now replace.
It is therefore safe to leave call_mmap() in place as a convenience
function (and to avoid churn). The invokers are:
ovl_file_operations -> mmap -> ovl_mmap() -> backing_file_mmap()
coda_file_operations -> mmap -> coda_file_mmap()
shm_file_operations -> shm_mmap()
shm_file_operations_huge -> shm_mmap()
dma_buf_fops -> dma_buf_mmap_internal -> i915_dmabuf_ops
-> i915_gem_dmabuf_mmap()
None of these callers interact with vm_ops or mappings in a problematic
way on error, quickly exiting out.
Link: https://lkml.kernel.org/r/cover.1730224667.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/d41fd763496fd0048a962f3fd9407dc72dd4fd86.1730224667.git.lorenzo.stoakes@oracle.com
Fixes:
|
||
|
Hugh Dickins
|
f8f931bba0 |
mm/thp: fix deferred split unqueue naming and locking
Recent changes are putting more pressure on THP deferred split queues: under load revealing long-standing races, causing list_del corruptions, "Bad page state"s and worse (I keep BUGs in both of those, so usually don't get to see how badly they end up without). The relevant recent changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin, improved swap allocation, and underused THP splitting. Before fixing locking: rename misleading folio_undo_large_rmappable(), which does not undo large_rmappable, to folio_unqueue_deferred_split(), which is what it does. But that and its out-of-line __callee are mm internals of very limited usability: add comment and WARN_ON_ONCEs to check usage; and return a bool to say if a deferred split was unqueued, which can then be used in WARN_ON_ONCEs around safety checks (sparing callers the arcane conditionals in __folio_unqueue_deferred_split()). Just omit the folio_unqueue_deferred_split() from free_unref_folios(), all of whose callers now call it beforehand (and if any forget then bad_page() will tell) - except for its caller put_pages_list(), which itself no longer has any callers (and will be deleted separately). Swapout: mem_cgroup_swapout() has been resetting folio->memcg_data 0 without checking and unqueueing a THP folio from deferred split list; which is unfortunate, since the split_queue_lock depends on the memcg (when memcg is enabled); so swapout has been unqueueing such THPs later, when freeing the folio, using the pgdat's lock instead: potentially corrupting the memcg's list. __remove_mapping() has frozen refcount to 0 here, so no problem with calling folio_unqueue_deferred_split() before resetting memcg_data. That goes back to 5.4 commit |
||
|
Hugh Dickins
|
e66f3185fa |
mm/thp: fix deferred split queue not partially_mapped
Recent changes are putting more pressure on THP deferred split queues:
under load revealing long-standing races, causing list_del corruptions,
"Bad page state"s and worse (I keep BUGs in both of those, so usually
don't get to see how badly they end up without). The relevant recent
changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin,
improved swap allocation, and underused THP splitting.
The new unlocked list_del_init() in deferred_split_scan() is buggy. I
gave bad advice, it looks plausible since that's a local on-stack list,
but the fact is that it can race with a third party freeing or migrating
the preceding folio (properly unqueueing it with refcount 0 while holding
split_queue_lock), thereby corrupting the list linkage.
The obvious answer would be to take split_queue_lock there: but it has a
long history of contention, so I'm reluctant to add to that. Instead,
make sure that there is always one safe (raised refcount) folio before, by
delaying its folio_put(). (And of course I was wrong to suggest updating
split_queue_len without the lock: leave that until the splice.)
And remove two over-eager partially_mapped checks, restoring those tests
to how they were before: if uncharge_folio() or free_tail_page_prepare()
finds _deferred_list non-empty, it's in trouble whether or not that folio
is partially_mapped (and the flag was already cleared in the latter case).
Link: https://lkml.kernel.org/r/81e34a8b-113a-0701-740e-2135c97eb1d7@google.com
Fixes:
|
||
|
Linus Torvalds
|
59b723cd2a | Linux 6.12-rc6 | ||
|
Linus Torvalds
|
a8cc743272 |
17 hotfixes. 9 are cc:stable. 13 are MM and 4 are non-MM.
The usual collection of singletons - please see the changelogs.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZyfGDAAKCRDdBJ7gKXxA
jr19AQD6bfDF/6L2Alq1QG26pgrgccEbKzDSzR6pBajwCbdrNQD/XPhiv3zRJfGf
lgt0Qkqwe/ApBhVYUnL8y1CePv3EDgA=
=W5W0
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-11-03-10-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 9 are cc:stable. 13 are MM and 4 are non-MM.
The usual collection of singletons - please see the changelogs"
* tag 'mm-hotfixes-stable-2024-11-03-10-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: multi-gen LRU: use {ptep,pmdp}_clear_young_notify()
mm: multi-gen LRU: remove MM_LEAF_OLD and MM_NONLEAF_TOTAL stats
mm, mmap: limit THP alignment of anonymous mappings to PMD-aligned sizes
mm: shrinker: avoid memleak in alloc_shrinker_info
.mailmap: update e-mail address for Eugen Hristev
vmscan,migrate: fix page count imbalance on node stats when demoting pages
mailmap: update Jarkko's email addresses
mm: allow set/clear page_type again
nilfs2: fix potential deadlock with newly created symlinks
Squashfs: fix variable overflow in squashfs_readpage_block
kasan: remove vmalloc_percpu test
tools/mm: -Werror fixes in page-types/slabinfo
mm, swap: avoid over reclaim of full clusters
mm: fix PSWPIN counter for large folios swap-in
mm: avoid VM_BUG_ON when try to map an anon large folio to zero page.
mm/codetag: fix null pointer check logic for ref and tag
mm/gup: stop leaking pinned pages in low memory conditions
|
||
|
Linus Torvalds
|
d5aaa0bc6d |
phy fixes for 6.12
- Bunch of Qualcomm QMP driver fixes for null deref on suspend, bogus
supplies fix and reset entries fix
- BCM usb driver init array fix
- cadence array offset fix
- starfive link configuration fix
- config dependency fix for rockchip driver
- freescale reset signal fix before pll lock
- tegra driver fix for error pointer check
-----BEGIN PGP SIGNATURE-----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=jQHX
-----END PGP SIGNATURE-----
Merge tag 'phy-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Qualcomm QMP driver fixes for null deref on suspend, bogus supplies
fix and reset entries fix
- BCM usb driver init array fix
- cadence array offset fix
- starfive link configuration fix
- config dependency fix for rockchip driver
- freescale reset signal fix before pll lock
- tegra driver fix for error pointer check
* tag 'phy-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: tegra: xusb: Add error pointer check in xusb.c
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Fix X1E80100 resets entries
phy: freescale: imx8m-pcie: Do CMN_RST just before PHY PLL lock check
phy: phy-rockchip-samsung-hdptx: Depend on CONFIG_COMMON_CLK
phy: ti: phy-j721e-wiz: fix usxgmii configuration
phy: starfive: jh7110-usb: Fix link configuration to controller
phy: qcom: qmp-pcie: drop bogus x1e80100 qref supplies
phy: qcom: qmp-combo: move driver data initialisation earlier
phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend
phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend
phy: qcom: qmp-usb: fix NULL-deref on runtime suspend
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: add missing x1e80100 pipediv2 clocks
phy: usb: disable COMMONONN for dual mode
phy: cadence: Sierra: Fix offset of DEQ open eye algorithm control register
phy: usb: Fix missing elements in BCM4908 USB init array
|
||
|
Linus Torvalds
|
e8529dcb12 |
dmaengine fixes for v6.12
Driver fixes for: - TI driver fix to set EOP for cyclic BCDMA transfers - sh rz-dmac driver fix for handling config with zero address -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmcnoW0ACgkQfBQHDyUj g0c+Gw/+OE81N3SLjd5AhCvMNcXtI/z5fwmzajcwabEuySiBeYUluaTv+hm/Cn44 JJv5HieY5EbBPOx6MzR0MaiwwKnKqMIrgHH21T0+UR2hclmoyw0xOpvoDsMYMNE3 8nf451KRmG2KRHeHV7H8JqF6i7OBhkZaO4KUypTpmViB/3NX2e4LVT739Zn/+9gA ianWA3ldFUf9w2hqhEH/p8nx6v9AFNQFEuG91IzdkANMDy7GBqKo6C/PeJQrpZRX O3bhYlyATJVraQwzoWLOC2D5sSiFbcKmGl2WXd9gY6p74NCd3+oaCo4XLAhPRbGF LGUk5xwJ5mdz9vd0X3r0/iMjk/Yvkb6Wc3mjuxeAYMIC0p8Xa5BGvyPRmc5VnvaP Gpd5aWoEqlIiIM7c699OgHD0l7WnXLbS091JnBhAwiNwaX8IlhuIX18qwyJvcMHN U/DELpVRPa47kohoWxsD7egGBmx8K5nO2nPMnSPA1feit9RBR82W4NGZhk5aywBo v7IiVTTP5N07arKcYtUMNvrM3InnmH/mmJ0Xdrni2RpNPgNATB/z6qcCaRFLejel nsEwSCOusdkDAsIM7y5moZd4UecppwbrJZdOVvR6Co8ncyCE9eo3wUC9hp5coOD6 N7A/Znyy+STntOMj6sxJF6zpV2UNFzGwxIkH2sIuBUpbGcjMnck= =Ngtc -----END PGP SIGNATURE----- Merge tag 'dmaengine-fix-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: - TI driver fix to set EOP for cyclic BCDMA transfers - sh rz-dmac driver fix for handling config with zero address * tag 'dmaengine-fix-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: ti: k3-udma: Set EOP for all TRs in cyclic BCDMA transfer dmaengine: sh: rz-dmac: handle configs where one address is zero |
||
|
Linus Torvalds
|
886b7e80ab |
Driver core revert fix for 6.12-rc6
Here is a single driver core revert for 6.12-rc6. It reverts a change that came in -rc1 that was supposed to resolve a reported problem, but caused another one, so revert it for now so that we can get this all worked out properly in 6.13. The revert has been in linux-next all week with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZydlNw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymZQACdGsXkF7ULnB66l3v6+tRov2nNwV8AnAldVvEY 14YCtM4i/bYhoQElLsOB =TFSg -----END PGP SIGNATURE----- Merge tag 'driver-core-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core revert from Greg KH: "Here is a single driver core revert for 6.12-rc6. It reverts a change that came in -rc1 that was supposed to resolve a reported problem, but caused another one, so revert it for now so that we can get this all worked out properly in 6.13. The revert has been in linux-next all week with no reported issues" * tag 'driver-core-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "driver core: Fix uevent_show() vs driver detach race" |
||
|
Linus Torvalds
|
be5bfa1378 |
USB / Thunderbolt fixes for 6.12-rc6
Here are some small USB and Thunderbolt driver fixes for 6.12-rc6 that have been sitting in my tree this week. Included in here are the following: - thunderbolt driver fixes for reported issues - USB typec driver fixes - xhci driver fixes for reported problems - dwc2 driver revert for a broken change - usb phy driver fix - usbip tool fix All of these have been in linux-next this week with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZydklw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynrOQCgvUxfi1tUPR78CDuIR1fiaNxdsDsAoI+WwyFt 5U2D3ezAl3ovyRVWlN4y =DSxw -----END PGP SIGNATURE----- Merge tag 'usb-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt fixes from Greg KH: "Here are some small USB and Thunderbolt driver fixes for 6.12-rc6 that have been sitting in my tree this week. Included in here are the following: - thunderbolt driver fixes for reported issues - USB typec driver fixes - xhci driver fixes for reported problems - dwc2 driver revert for a broken change - usb phy driver fix - usbip tool fix All of these have been in linux-next this week with no reported issues" * tag 'usb-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: tcpm: restrict SNK_WAIT_CAPABILITIES_TIMEOUT transitions to non self-powered devices usb: phy: Fix API devm_usb_put_phy() can not release the phy usb: typec: use cleanup facility for 'altmodes_node' usb: typec: fix unreleased fwnode_handle in typec_port_register_altmodes() usb: typec: qcom-pmic-typec: fix missing fwnode removal in error path usb: typec: qcom-pmic-typec: use fwnode_handle_put() to release fwnodes usb: acpi: fix boot hang due to early incorrect 'tunneled' USB3 device links Revert "usb: dwc2: Skip clock gating on Broadcom SoCs" xhci: Fix Link TRB DMA in command ring stopped completion event xhci: Use pm_runtime_get to prevent RPM on unsupported systems usbip: tools: Fix detach_port() invalid port error path thunderbolt: Honor TMU requirements in the domain when setting TMU mode thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan() |
||
|
Yu Zhao
|
1d4832becd |
mm: multi-gen LRU: use {ptep,pmdp}_clear_young_notify()
When the MM_WALK capability is enabled, memory that is mostly accessed by
a VM appears younger than it really is, therefore this memory will be less
likely to be evicted. Therefore, the presence of a running VM can
significantly increase swap-outs for non-VM memory, regressing the
performance for the rest of the system.
Fix this regression by always calling {ptep,pmdp}_clear_young_notify()
whenever we clear the young bits on PMDs/PTEs.
[jthoughton@google.com: fix link-time error]
Link: https://lkml.kernel.org/r/20241019012940.3656292-3-jthoughton@google.com
Fixes:
|
||
|
Yu Zhao
|
ddd6d8e975 |
mm: multi-gen LRU: remove MM_LEAF_OLD and MM_NONLEAF_TOTAL stats
Patch series "mm: multi-gen LRU: Have secondary MMUs participate in
MM_WALK".
Today, the MM_WALK capability causes MGLRU to clear the young bit from
PMDs and PTEs during the page table walk before eviction, but MGLRU does
not call the clear_young() MMU notifier in this case. By not calling this
notifier, the MM walk takes less time/CPU, but it causes pages that are
accessed mostly through KVM / secondary MMUs to appear younger than they
should be.
We do call the clear_young() notifier today, but only when attempting to
evict the page, so we end up clearing young/accessed information less
frequently for secondary MMUs than for mm PTEs, and therefore they appear
younger and are less likely to be evicted. Therefore, memory that is
*not* being accessed mostly by KVM will be evicted *more* frequently,
worsening performance.
ChromeOS observed a tab-open latency regression when enabling MGLRU with a
setup that involved running a VM:
Tab-open latency histogram (ms)
Version p50 mean p95 p99 max
base 1315 1198 2347 3454 10319
mglru 2559 1311 7399 12060 43758
fix 1119 926 2470 4211 6947
This series replaces the final non-selftest patchs from this series[1],
which introduced a similar change (and a new MMU notifier) with KVM
optimizations. I'll send a separate series (to Sean and Paolo) for the
KVM optimizations.
This series also makes proactive reclaim with MGLRU possible for KVM
memory. I have verified that this functions correctly with the selftest
from [1], but given that that test is a KVM selftest, I'll send it with
the rest of the KVM optimizations later. Andrew, let me know if you'd
like to take the test now anyway.
[1]: https://lore.kernel.org/linux-mm/20240926013506.860253-18-jthoughton@google.com/
This patch (of 2):
The removed stats, MM_LEAF_OLD and MM_NONLEAF_TOTAL, are not very helpful
and become more complicated to properly compute when adding
test/clear_young() notifiers in MGLRU's mm walk.
Link: https://lkml.kernel.org/r/20241019012940.3656292-1-jthoughton@google.com
Link: https://lkml.kernel.org/r/20241019012940.3656292-2-jthoughton@google.com
Fixes:
|
||
|
Linus Torvalds
|
32cfb3c48e |
Char/Misc/IIO driver fixes for 6.12-rc6
Here are some small char/misc/iio fixes for 6.12-rc6 that resolves some
reported issues. Included in here are the following:
- small IIO driver fixes for many reported issues
- mei driver fix for a suddenly much reported issue for an "old"
issue.
- MAINTAINERS update for a developer who has moved companies and
forgot to update their old entry.
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZydl6A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl1jACfWZJs7WLkK8N36jPvdFtHD/mBmA0AnRJc1bw+
f8XQ6MJsU6nZi5PErB8s
=/D+f
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fixes from Greg KH:
"Here are some small char/misc/iio fixes for 6.12-rc6 that resolve
some reported issues. Included in here are the following:
- small IIO driver fixes for many reported issues
- mei driver fix for a suddenly much reported issue for an "old"
issue.
- MAINTAINERS update for a developer who has moved companies and
forgot to update their old entry.
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: use kvmalloc for read buffer
MAINTAINERS: add netup_unidvb maintainer
iio: dac: Kconfig: Fix build error for ltc2664
iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr()
staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()
docs: iio: ad7380: fix supply for ad7380-4
iio: adc: ad7380: fix supplies for ad7380-4
iio: adc: ad7380: add missing supplies
iio: adc: ad7380: use devm_regulator_get_enable_read_voltage()
dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
iio: light: veml6030: fix microlux value calculation
iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table()
iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table()
|
||
|
Linus Torvalds
|
295ba6501d |
Input updates for v6.12-rc5
- a fix for regression in input core introduced in 6.11 preventing re-registering input handlers - a fix for adp5588-keys driver tyring to disable interrupt 0 at suspend when devices is used without interrupt - a fix for edt-ft5x06 to stop leaking regmap structure when probing fails and to make sure it is not released too early on removal. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZycQwgAKCRBAj56VGEWX nFgtAQDxuWplL+cwA5f3g+/Rq38faHBY5ebmsC9G/QnBZs4hTQD/dL04tU9NwvNq GYw4MYRNaDIeY8vyq21Y+dQe0uL0rAM= =xAeU -----END PGP SIGNATURE----- Merge tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix for regression in input core introduced in 6.11 preventing re-registering input handlers - a fix for adp5588-keys driver tyring to disable interrupt 0 at suspend when devices is used without interrupt - a fix for edt-ft5x06 to stop leaking regmap structure when probing fails and to make sure it is not released too early on removal. * tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: fix regression when re-registering input handlers Input: adp5588-keys - do not try to disable interrupt 0 Input: edt-ft5x06 - fix regmap leak when probe fails |
||
|
Linus Torvalds
|
a33ab3f94f |
Kbuild fixes for v6.12 (2nd)
- Fix a memory leak in modpost - Resolve build issues when cross-compiling RPM and Debian packages - Fix another regression in Kconfig - Fix incorrect MODULE_ALIAS() output in modpost -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmcnmigVHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGClEP/1H6H3VPp3s5AYE1elWXXZH4c42Q PLJQhNOBFWIaEIbaK/eCMd24vUQl/pb3b80MkeE7XILuQxzeQYIHQ7X1+iYsgDFV 96wzNP2Z7GpI1JzldWndAKSVMtfIiQHkFhZIwErJRVwDvFyH9ro0Smso5HnwfVql ycsGZE4jfTMrMwgobj4WtgOgdBQb6c04w4MCcxgX3f4Zk4YyTlDzLWQMvSWklWVd k9mW3T1JSTl5zvHlDK7kuosdXYrUtONleNbiYyxDRFUfKhPeJkiSq5ia/F83VhLL Fh7xRNIF7Em9Mzs42if/uuOW2ouq6JuePHFhdf+0rQIyxDFcTIOHojozrYkBPQEb MjO/JDLrll2ydfz4Lvreu0JoV3kPW58pM9Re29fYUPTmrtYeZWKS6TS2VfzOEEUs Z4xMn1oQuRDR7tnEB2OdPTkaYzlALtMXMyl4/MK6pQ4EiToFth7Syb4W0ILnp1SA Dn27yEqIlrWP12B5OceJNzN4QmNySodnFu+K1acSRxCIKAJyfbcF2FTuZuZx5B8P 6fPHIdYBSOUWSJGDGEqLxLPgcp9zcXLA3MNIx9Lk97m0F5AxLXA+0HCwx7t4KZH9 fHjcaGJS6LR5Y5bVcu/a7W+MVB3o8+vy6tsnciiBI70MJn0ywqHhDns3Tu+pMP5C Rgx1M1GGTOvBWnI2 =QPqn -----END PGP SIGNATURE----- Merge tag 'kbuild-fixes-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix a memory leak in modpost - Resolve build issues when cross-compiling RPM and Debian packages - Fix another regression in Kconfig - Fix incorrect MODULE_ALIAS() output in modpost * tag 'kbuild-fixes-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: fix input MODULE_DEVICE_TABLE() built for 64-bit on 32-bit host modpost: fix acpi MODULE_DEVICE_TABLE built with mismatched endianness kconfig: show sub-menu entries even if the prompt is hidden kbuild: deb-pkg: add pkg.linux-upstream.nokerneldbg build profile kbuild: deb-pkg: add pkg.linux-upstream.nokernelheaders build profile kbuild: rpm-pkg: disable kernel-devel package when cross-compiling sumversion: Fix a memory leak in get_src_version() |
||
|
Linus Torvalds
|
b9021de3ec |
A trivial compile test fix for x86
When CONFIG_AMD_NB is not set a COMPILE_TEST of an AMD specific driver fails due to a missing inline stub. Add the stub to cure it. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmcnUG0THHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoZJIEAC2Sqi7PQs6gK7kR/vfgi5F0uq1nHgV XyPt11mc50sQ6j/IrDAMafD4PzS0v1gu/1mN4u9riiC3qYZDt9FizUuXVGMQzh7h QuwgSSKicBX3ZncUP8BiI7fveeC0XScE4dGe++bUKplkyKJgFTMzl77pkQduRDj9 sMtq9y0tyGAE1v40aHdvQPOhOS4UvMKeyHh7oty/SaXkfE9MsuJQYX83jSDcMekA AjqfLzUC/zPFwnPsBCclm1rgiCofGpeQStmRmoH+g5zGY0MeEqmYG1e6xAAJq0Kn KEvAesjY4a7DDYvoS67QIi/hdywSrZQbgulqC+9o1kOZUkgYXZaNF8XVyYdXB/wy 10FmHNHs82Z8XbNrw7x44jdk+R2WrjOxCUbt9dmGsEU9aetAMrLs0s7I0DTEZRSZ gbp6kVjvJa9SQGuSVnqWX81AjZ4gGiyEvnf2eZXU00JZiCIiH/fuYpxpkAJ784Ui BQL2CGU2cyy0ApOAzP7iRQXRmAp7ZVhdTyrGTkTnoeW2QvvTQdA+6E2oP9twy8YQ tfxKDub/wMWu4USGYoX90IQBRP7k09GfitYvfvxmq8AKD8bYPW7axfr7oqVQB3bf vEjQwx0hnbQ16y6KDNID4YAWebwYhws53ZKb6bF0pMKo+dZjiU/FeB+4R9ivNrDI 3UeuwFL+YSL7wA== =p6Lo -----END PGP SIGNATURE----- Merge tag 'x86-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A trivial compile test fix for x86: When CONFIG_AMD_NB is not set a COMPILE_TEST of an AMD specific driver fails due to a missing inline stub. Add the stub to cure it" * tag 'x86-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/amd_nb: Fix compile-testing without CONFIG_AMD_NB |