mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-01-11 15:49:56 +00:00
18818 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
fb896c9107 |
ARM: SoC DT fixes for v5.8
These are the latest device tree fixes for Arm SoCs:
- TI Keystone2 ethernet regressed after a driver change broke with
incorrect phy-mode in a board's DT source.
- A similar fix is needed for two i.MX boards that were missed in
an earlier bugfix.
- DT change for Armada 38x allowing to add the register needed to fix
NETA lockup when repeatedly switching speed.
- One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card
detect work correctly.
- Two fixes for the Allwinner SoCs, one to relax the CMA allocation
ranges that were failing on older SoCs and one to fix Cedrus on the H6.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=qXc9
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master
Pull ARM SoC DT fixes from Arnd Bergmann:
"These are the latest device tree fixes for Arm SoCs:
- TI Keystone2 ethernet regressed after a driver change broke with
incorrect phy-mode in a board's DT source.
- A similar fix is needed for two i.MX boards that were missed in an
earlier bugfix.
- DT change for Armada 38x allowing to add the register needed to fix
NETA lockup when repeatedly switching speed.
- One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card
detect work correctly.
- Two fixes for the Allwinner SoCs, one to relax the CMA allocation
ranges that were failing on older SoCs and one to fix Cedrus on the
H6"
* tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for ksz9031 phy
ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds
ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect
ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2
ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2
arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage
ARM: dts sunxi: Relax a bit the CMA pool allocation range
|
||
|
Arnd Bergmann
|
21a59e0bf5 |
Two fixes for the Allwinner SoCs, one to relax the CMA allocation ranges that
were failing on older SoCs and one to fix Cedrus on the H6. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXxWlyQAKCRDj7w1vZxhR xcNtAQDO2rSFHGpQsUE/MCRxMqd2c2OQ9zpovRnirnyJqLCPEwD/b8GAi9tfJksM lmghSQnByq6Sqm9UA/i6jjLfz//4iQg= =JoYD -----END PGP SIGNATURE----- Merge tag 'sunxi-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Two fixes for the Allwinner SoCs, one to relax the CMA allocation ranges that were failing on older SoCs and one to fix Cedrus on the H6. * tag 'sunxi-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage ARM: dts sunxi: Relax a bit the CMA pool allocation range Link: https://lore.kernel.org/r/e24f0608-6a4f-4163-b99e-a5f48e796184.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
8c26c87b05 |
sound fixes for 5.8-rc7
This PR became fairly large, containing mostly the collection of ASoC fixes that slipped from the previous request, so I sent now a bit earlier than usual. But all changes look small and mostly device-specific, hence nothing to worry too much. Majority of changes are for x86 based platforms and their CODEC drivers, in order to address some issues hit by their recent tests and fuzzing. The rest are other ASoC device-specific fixes (imx, qcom, wm8974, amd, rockchip) as well as a trivial fix for a kernel WARNING hit by syzkaller. -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl8WqvQOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE8KEA/+MZ+3jkFFinrq+mPPPZOJdMe10XxT1moZrjie H+cA6623iVhnKMB9JKMSncroSpgw7OaFlYP1tGfsQkD32rglubUhAqAs7Up3ve9O tzVLqyaxwNmy6I38n7g2TUlEIvJyRCiC2pR97XrtqiAmsRDheYBsn8lEN2Ie6eUF uAftr6DHJ5lHeYMWFBwN1fjbg4vMZGAFEtK4czme05b0n2gHo4AnXGfpnxYwYhfN 5WRQm12rtjDsWPC9Rk32auZBH9qnHeGALRCYWlRje4XfbaFnSgbID9/NWNodXjR7 m92Tw5bEV9SQx+0kNd3+ibGp0RLrgfMitp3hlv2as5GHTlQi2nfLWnWmWUzWFflR TKbcpwOANwncMx/KrfEkcqEt0cozMRL3MgkSaXvbarv8ZAyzJGYYIvNXLpA+AHLu ryj02Cc7wyTO5Axv7fqF9yNM53mfu6TEPkdtTGOjszTkkf2OknZYjiB4ci47elZm 3db303JZVmW09b3qNcrNJ273LWxIRaGbFOe1KExfHB1lsBnlufNSVY3+spDl35Cu u5w96oCF6KO/j2f3iKUdMT88XfRxsheN9GnU7g3iso8Ewdk7szzhfE8Ynlz+Zyca 74fyNbowjBrU/FZzY4VopvqQqfNG9mYazQEH+EIBSLUIoGXaKSz+Xnrfz7BgZvCu TEb1sB4= =iAZG -----END PGP SIGNATURE----- Merge tag 'sound-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into master Pull sound fixes from Takashi Iwai: "This became fairly large, containing mostly the collection of ASoC fixes that slipped from the previous request, so I sent now a bit earlier than usual. But all changes look small and mostly device-specific, hence nothing to worry too much. Majority of changes are for x86 based platforms and their CODEC drivers, in order to address some issues hit by their recent tests and fuzzing. The rest are other ASoC device-specific fixes (imx, qcom, wm8974, amd, rockchip) as well as a trivial fix for a kernel WARNING hit by syzkaller" * tag 'sound-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits) ALSA: hda/realtek: Fixed ALC298 sound bug by adding quirk for Samsung Notebook Pen S ALSA: info: Drop WARN_ON() from buffer NULL sanity check ASoC: rt5682: Report the button event in the headset type only ASoC: Intel: bytcht_es8316: Add missed put_device() ASoC: rt5682: Enable Vref2 under using PLL2 ASoC: rt286: fix unexpected interrupt happens ASoC: wm8974: remove unsupported clock mode ASoC: wm8974: fix Boost Mixer Aux Switch ASoC: SOF: core: fix null-ptr-deref bug during device removal ASoc: codecs: max98373: remove Idle_bias_on to let codec suspend ASoC: codecs: max98373: Removed superfluous volume control from chip default ASoC: topology: fix tlvs in error handling for widget_dmixer ASoC: topology: fix kernel oops on route addition error ASoC: SOF: imx: add min/max channels for SAI/ESAI on i.MX8/i.MX8M ASoC: Intel: bdw-rt5677: fix non BE conversion ASoC: soc-dai: set dai_link dpcm_ flags with a helper MAINTAINERS: Add Shengjiu to reviewer list of sound/soc/fsl ASoC: core: Remove only the registered component in devm functions MAINTAINERS: Change Maintainer for some at91 drivers ASoC: dt-bindings: simple-card: Fix 'make dt_binding_check' warnings ... |
||
|
Takashi Iwai
|
d3bbc28bd3 |
ASoC: Fixes for v5.8
An awful lot of mostly small fixes here, mainly for x86 based platforms and the CODEC drivers mainly used on them. For the most part this is either minor device specific stuff which seems to come from detailed testing or robustness against errors which comes from people having done some fuzzing runs aginst the topology code. -----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl8Rzk0THGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0GWlB/9Y6g9MQ4Ih4Evsv4q/ZeJRnTGaKZMT 7XjZRB64tTrFWbt38iGpRcjQLy5I5tVuGbdd7mPVKgZgSVxvoj4HQ4vf23rkNxon RuQIbFtI2rwvdWKDo9a0RkF+IwuWhmrupfN8DMZoJIyRyh99tDrLwGjmiUUXsVV2 NyfcGerQjbngraK+2lQtnzbfX9d2qGiZVKEdczQVjJcgyNAYI2N22+3O1hFHmo80 6f5BbRpaVPXpQmRBmFthTdgthrr6uZPDXDoEYw77V9okvCwthrjBIGDow4EkVTZk xRPKo7g2EFuLd18ro/J8nAJ1KDideKB4I5cFcz9QViVZbVftk2CrFrvg =V/55 -----END PGP SIGNATURE----- Merge tag 'asoc-fix-v5.8-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.8 An awful lot of mostly small fixes here, mainly for x86 based platforms and the CODEC drivers mainly used on them. For the most part this is either minor device specific stuff which seems to come from detailed testing or robustness against errors which comes from people having done some fuzzing runs aginst the topology code. |
||
|
Maxime Ripard
|
62a8ccf3a2
|
arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage
Now that the IOMMU driver has been introduced, it prevents any access from
a DMA master going through it that hasn't properly mapped the pages, and
that link is set up through the iommus property.
Unfortunately we forgot to add that property to the video engine node when
adding the IOMMU node, so now any DMA access is broken.
Fixes: b3a0a2f910c7 ("arm64: dts: allwinner: h6: Add IOMMU")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200628180804.79026-1-maxime@cerno.tech
|
||
|
Linus Torvalds
|
684c8ccc40 |
Devicetree fixes for v5.8, take 2:
- Sync dtc to upstream to pick up fixes for I2C bus checks and quiet warnings - Various fixes for DT binding check warnings - A couple of build fixes/improvements for binding checks - ReST formatting improvements for writing-schema.rst - Document reference fixes -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl7+UtkQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw78WEACCkLrvgqJ6fkAInzOGz8yXgrVEU2mWYlgD 4mt5K0M7mVeNonuQJDCbFAvmisKTS/Gxjw5234k68aJ/0C7oCRjMhB/wIKgU/gzm K3mBOI02CAxCZzKvQQloESZV62nUI9wOcRTF3K5BjMsxsGbNBzaZPxP3A9Uku34t VpY/H23ZXZ1FeWx0OjeMF6lKJP4cWX4l4Ay9Y9oE4m31LXq64Cb5VBBxo70yqJZB QiTCqBBS+WpTCvbukKn+rCazeRka5evCSC0vlXum4WkifZDMIclke7gS4QjfsJr/ DM6OmAfNRfOyYO6yGKZzU2eu98q/wFggGaqyJ2vn7Ht0CbzWqgrCaQzEN5ksxwak CKe9KHS/W2PK3nxRFa1GfznEoBsueckkzmv4hxuwafDuBPgt+UPDExbruHvV3qHC O4W2zdYWJaQE9ZeiBkZmAbDM+cdbzyd0qHFcuNuU7d53Ez+XDpVDhVE2WX3Hiegw vTLKyId9McvHrYlRZqNgUSbKgqCCPkjfdU5ANAQB7LSFuiolNZgqcDZZ2Jq9nHxS irX1dvPKgXxTVz4SAZ6vtrPp5ZueSxcgYGkdC6A+3sm7Xi4RdTgHeRrHFDP3QxrE FoGAb8ZBzGL6EVdiyIDMPSN2rnABKntheixVZ8bQ4yA8BAEKapuoMRAqCedNW9q+ ixQ/tlB83w== =/l5U -----END PGP SIGNATURE----- Merge tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Sync dtc to upstream to pick up fixes for I2C bus checks and quiet warnings - Various fixes for DT binding check warnings - A couple of build fixes/improvements for binding checks - ReST formatting improvements for writing-schema.rst - Document reference fixes * tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: clock: imx: Fix e-mail address dt-bindings: thermal: k3: Fix the reg property dt-bindings: thermal: Remove soc unit address dt-bindings: display: arm: versatile: Pass the sysreg unit name dt-bindings: usb: aspeed: Remove the leading zeroes dt-bindings: copy process-schema-examples.yaml to process-schema.yaml dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check' dt-bindings: fix error in 'make clean' after 'make dt_binding_check' dt-bindings: mailbox: zynqmp_ipi: fix unit address dt-bindings: bus: uniphier-system-bus: fix warning in example scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c doc: devicetree: bindings: fix spelling mistake docs: dt: minor adjustments at writing-schema.rst dt: fix reference to olpc,xo1.75-ec.txt dt: Fix broken references to renamed docs dt: fix broken links due to txt->yaml renames dt: update a reference for reneases pcar file renamed to yaml |
||
|
Fabio Estevam
|
5aaec71d60
|
ASoC: dt-bindings: simple-card: Fix 'make dt_binding_check' warnings
The following build warnings are seen with 'make dt_binding_check': Documentation/devicetree/bindings/sound/simple-card.example.dts:209.46-211.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:213.37-215.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:250.42-261.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:263.42-288.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:270.32-272.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:273.23-275.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:276.23-278.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@2: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:279.23-281.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@3: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:290.42-303.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@2: node has a unit name, but no reg or ranges property Fix them all. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20200630223020.25546-1-festevam@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Fabio Estevam
|
0115e6c98c |
dt-bindings: clock: imx: Fix e-mail address
The freescale.com domain is gone for quite some time. Use the nxp.com domain instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20200701005346.1008-1-festevam@gmail.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Fabio Estevam
|
341404415e |
dt-bindings: thermal: k3: Fix the reg property
Adjust the reg property to fix the following warning seen with 'make dt_binding_check': Documentation/devicetree/bindings/thermal/ti,am654-thermal.example.dt.yaml: example-0: thermal@42050000:reg:0: [0, 1107623936, 0, 604] is too long Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20200630122527.28640-1-festevam@gmail.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Fabio Estevam
|
34b9610609 |
dt-bindings: thermal: Remove soc unit address
Remove the soc unit address to fix the following warnings seen with 'make dt_binding_check': Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/thermal/thermal-zones.example.dts:23.20-50.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20200630121804.27887-1-festevam@gmail.com [robh: also fix thermal-zones.yaml example] Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Fabio Estevam
|
0b3f3ad3fe |
dt-bindings: display: arm: versatile: Pass the sysreg unit name
Pass the sysreg unit name to fix the following warning seen with 'make dt_binding_check': Warning (unit_address_vs_reg): /example-0/sysreg: node has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20200629215500.18037-1-festevam@gmail.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Fabio Estevam
|
dd075b664c |
dt-bindings: usb: aspeed: Remove the leading zeroes
Remove the leading zeroes to fix the following warning seen with 'make dt_binding_check': Documentation/devicetree/bindings/usb/aspeed,usb-vhub.example.dts:37.33-42.23: Warning (unit_address_format): /example-0/usb-vhub@1e6a0000/vhub-strings/string@0409: unit name should not have leading 0s Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20200629214027.16768-1-festevam@gmail.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Masahiro Yamada
|
dee9c0b575 |
dt-bindings: copy process-schema-examples.yaml to process-schema.yaml
There are two processed schema files:
- processed-schema-examples.yaml
Used for 'make dt_binding_check'. This is always a full schema.
- processed-schema.yaml
Used for 'make dtbs_check'. This may be a full schema, or a smaller
subset if DT_SCHEMA_FILES is given by a user.
If DT_SCHEMA_FILES is not specified, they are the same. You can copy
the former to the latter instead of running dt-mk-schema twice. This
saves the cpu time a lot when you do 'make dt_binding_check dtbs_check'
because building the full schema takes a couple of seconds.
If DT_SCHEMA_FILES is specified, processed-schema.yaml is generated
based on the specified yaml files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-4-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
||
|
Masahiro Yamada
|
ce810eeb65 |
dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check'
Currently, processed-schema.yaml is always built, but it is actually used only for 'make dtbs_check'. 'make dt_binding_check' uses processed-schema-example.yaml instead. Build processed-schema.yaml only for 'make dtbs_check'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20200625170434.635114-3-masahiroy@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Masahiro Yamada
|
fa714cf58c |
dt-bindings: fix error in 'make clean' after 'make dt_binding_check'
We are having more and more schema files.
Commit 8b6b80218b01 ("dt-bindings: Fix command line length limit
calling dt-mk-schema") fixed the 'Argument list too long' error of
the schema checks, but the same error happens while cleaning too.
'make clean' after 'make dt_binding_check' fails as follows:
$ make dt_binding_check
[ snip ]
$ make clean
make[2]: execvp: /bin/sh: Argument list too long
make[2]: *** [scripts/Makefile.clean:52: __clean] Error 127
make[1]: *** [scripts/Makefile.clean:66: Documentation/devicetree/bindings] Error 2
make: *** [Makefile:1763: _clean_Documentation] Error 2
'make dt_binding_check' generates so many .example.dts, .dt.yaml files,
which are passed to the 'rm' command when you run 'make clean'.
I added a small hack to use the 'find' command to clean up most of the
build artifacts before they are processed by scripts/Makefile.clean
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-2-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
||
|
Kangmin Park
|
35b9c0fdb9 |
dt-bindings: mailbox: zynqmp_ipi: fix unit address
Fix unit address to match the first address specified in the reg property of the node in example. Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com> Link: https://lore.kernel.org/r/20200625135158.5861-1-l4stpr0gr4m@gmail.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Masahiro Yamada
|
0fb24d1e5a |
dt-bindings: bus: uniphier-system-bus: fix warning in example
Since commit e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to
json-schema"), the schema for "ns16550a" is checked.
'make dt_binding_check' emits the following warning:
uart@5,00200000: $nodename:0: 'uart@5,00200000' does not match '^serial(@[0-9a-f,]+)*$'
Rename the node to follow the pattern defined in
Documentation/devicetree/bindings/serial/serial.yaml
While I was here, I removed leading zeros from unit names.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20200623113242.779241-1-yamada.masahiro@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
||
|
Rob Herring
|
3eb619b2f7 |
scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c
Sync with upstream dtc primarily to pickup the I2C bus check fixes. The interrupt_provider check is noisy, so turn it off for now. This adds the following commits from upstream: 9d7888cbf19c dtc: Consider one-character strings as strings 8259d59f59de checks: Improve i2c reg property checking fdabcf2980a4 checks: Remove warning for I2C_OWN_SLAVE_ADDRESS 2478b1652c8d libfdt: add extern "C" for C++ f68bfc2668b2 libfdt: trivial typo fix 7be250b4d059 libfdt: Correct condition for reordering blocks 81e0919a3e21 checks: Add interrupt provider test 85e5d839847a Makefile: when building libfdt only, do not add unneeded deps b28464a550c5 Fix some potential unaligned accesses in dtc Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Linus Torvalds
|
dd0d718152 |
spi: Fixes for v5.8
Quite a lot of fixes here for no single reason. There's a collection of the usual sort of device specific fixes and also a bunch of people have been working on spidev and the userspace test program spidev_test so they've got an unusually large collection of small fixes. -----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7wl/8THGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0NJBB/4oTOxPIfkKQyPcSTQB8FC6AHJ5Z8FT /4dtK4U32rn5Sms/CHNXMMFxomBgB46Ud19KJ/bEgqugJfI9Vl0bl9fZT+sDyVU3 rFPthVluIprFe1bITyfcgYmjRoznLRdzj9LMFsAWIe3Vmy584TdvXbl8n5COu5Wh 6sR6SuQnEn65x1HC4++3IsG70+ogz81sFRapk/7jXwS+YdwzWIqtN2s2IlUcTmcy ylijl04XUSyo6e/v/sjZaaRmIz72mW+HbMKW4iC0mGZ6yuACoy7zop9BuwAg6S7z dFDyqTZ5gq72ZeJc7fuco1y7jqQoKUC1oTRghPlbq2XG3Huta80l415l =32lr -----END PGP SIGNATURE----- Merge tag 'spi-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "Quite a lot of fixes here for no single reason. There's a collection of the usual sort of device specific fixes and also a bunch of people have been working on spidev and the userspace test program spidev_test so they've got an unusually large collection of small fixes" * tag 'spi-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spidev: fix a potential use-after-free in spidev_release() spi: spidev: fix a race between spidev_release and spidev_remove spi: stm32-qspi: Fix error path in case of -EPROBE_DEFER spi: uapi: spidev: Use TABs for alignment spi: spi-fsl-dspi: Free DMA memory with matching function spi: tools: Add macro definitions to fix build errors spi: tools: Make default_tx/rx and input_tx static spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a spi: rspi: Use requested instead of maximum bit rate spi: spidev_test: Use %u to format unsigned numbers spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH |
||
|
Flavio Suligoi
|
8c31055758 |
doc: devicetree: bindings: fix spelling mistake
Fix typo: "triger" --> "trigger" Acked-by: Guo Ren <guoren@kernel.org> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Link: https://lore.kernel.org/r/20200615075835.15202-1-f.suligoi@asem.it Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Mauro Carvalho Chehab
|
d0793c3c61 |
docs: dt: minor adjustments at writing-schema.rst
There are two literal blocks that aren't mark as such. Mark them, in order to make the document to produce a better html output. While here, also add a SPDX header to it. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/14fc680fd6596b277f94bb5a240cc9dfc41d59bf.1592203542.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Mauro Carvalho Chehab
|
6cb69ea534 |
dt: fix reference to olpc,xo1.75-ec.txt
This file was converted and renamed.
Fixes: 7882d822b3f9 ("dt-bindings: spi: Convert spi-pxa2xx to json-schema")
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/d0262854582ee754e4b8bd80677d96b3e098ea5c.1592203542.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
||
|
Mauro Carvalho Chehab
|
9ac2a66158 |
dt: Fix broken references to renamed docs
Some files got renamed. Those were all fixed automatically by ./scripts/documentation-file-ref-check --fix Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6866c0d6d10ce36bb151c2d3752a20eb5122c532.1592203542.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Mauro Carvalho Chehab
|
d985becff2 |
dt: fix broken links due to txt->yaml renames
There are some new broken doc links due to yaml renames at DT. Developers should really run: ./scripts/documentation-file-ref-check in order to solve those issues while submitting patches. This tool can even fix most of the issues with: ./scripts/documentation-file-ref-check --fix Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/0e4a7f0b7efcc8109c8a41a2e13c8adde4d9c6b9.1592203542.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Mauro Carvalho Chehab
|
f2d94b86cd |
dt: update a reference for reneases pcar file renamed to yaml
This file was renamed, but its reference at pfc-pinctl.txt is
still pointing to the old file.
Fixes: 7f7d408e5a00 ("dt-bindings: gpio: rcar: Convert to json-schema")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/72d7ec91a60e852d34f3e15bc5faef1f62a8260e.1592203542.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
||
|
Linus Torvalds
|
91fa58840a |
Merge branch 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "I2C has quite some patches for you this time. I hope it is the move to per-driver-maintainers which is now showing results. We will see. The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI), larger refactoring of the Designware, Tegra, and PXA drivers, the Cadence driver supports being a slave now, and there is support to instanciate SPD eeproms for well-known cases (which will be user-visible because the i801 driver supports it), and some devm_platform_ioremap_resource() conversions which blow up the diffstat. Note that I applied the Nuvoton driver quite late, so some minor fixup patches arrived during the merge window. I chose to apply them right away because they were trivial" * 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits) i2c: Drop stray comma in MODULE_AUTHOR statements i2c: npcm7xx: npcm_i2caddr[] can be static MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC i2c: npcm7xx: Fix a couple of error codes in probe i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n i2c: npcm7xx: Remove unnecessary parentheses i2c: npcm7xx: Add support for slave mode for Nuvoton i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver dt-bindings: i2c: npcm7xx: add NPCM I2C controller i2c: pxa: don't error out if there's no pinctrl i2c: add 'single-master' property to generic bindings i2c: designware: Add Baikal-T1 System I2C support i2c: designware: Move reg-space remapping into a dedicated function i2c: designware: Retrieve quirk flags as early as possible i2c: designware: Convert driver to using regmap API i2c: designware: Discard Cherry Trail model flag i2c: designware: Add Baytrail sem config DW I2C platform dependency i2c: designware: slave: Set DW I2C core module dependency i2c: designware: Use `-y` to build multi-object modules dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller ... |
||
|
Linus Torvalds
|
df2fbf5bfa |
- Add the hwmon support on the i.MX SC (Anson Huang)
- Thermal framework cleanups (self-encapsulation, pointless stubs, private structures) (Daniel Lezcano) - Use the PM QoS frequency changes for the devfreq cooling device (Matthias Kaehlcke) - Remove duplicate error messages from platform_get_irq() error handling (Markus Elfring) - Add support for the bandgap sensors (Keerthy) - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz) - Add Renesas R-Car maintainer entry (Niklas Söderlund) - Fix error checking after calling ti_bandgap_get_sensor_data() for the TI SoC thermal (Sudip Mukherjee) - Add latency constraint for the idle injection, the DT binding and the change the registering function (Daniel Lezcano) - Convert the thermal framework binding to the Yaml schema (Amit Kucheria) - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A. R. Silva) - Thermal framework cleanups (alphabetic order for heads, replace module.h by export.h, make file naming consistent) (Amit Kucheria) - Merge tsens-common into the tsens driver (Amit Kucheria) - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven) - Clean up the rcar_thermal_update_temp() function in the rcar thermal driver (Niklas Söderlund) - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian Tang) - Export GDDV, OEM vendor variables, and don't require IDSP for the int340x thermal driver - trivial conflicts fixed (Matthew Garrett) -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl7jra8ACgkQqDIjiipP 6E+ugAgApBF6FsHoonWIvoSrzBrrbU2oqhEJA42Mx+iY/UnXi01I79vZ/8WpZt7M D1J01Kf0PUhRbywoKaoCX3Oh9ZO9PKq4N9ZC8yqdoD6GLl+rC9Wmr7Ui+c80klcv M9rYhpPYfNXTFj0saSbbFWNNhP4TvhzGsNj8foYVQDKyhjbSmNE5ipZlbmP23jlr O53SmJAwS5zxLOd8QA5nfSWP9FYYMuCR2AHj8BUCmxiAjXZLPNB/Hz2RRBr7q0MF zRo/4HJ04mSQYp0kluP/EBhz9g2wM/htIPyWRveB/ByKEYt3UNKjB++PJmPbu5UG dS3aXZhRfaPqpdsWrMB9fY7ll+oyfw== =T+RI -----END PGP SIGNATURE----- Merge tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add the hwmon support on the i.MX SC (Anson Huang) - Thermal framework cleanups (self-encapsulation, pointless stubs, private structures) (Daniel Lezcano) - Use the PM QoS frequency changes for the devfreq cooling device (Matthias Kaehlcke) - Remove duplicate error messages from platform_get_irq() error handling (Markus Elfring) - Add support for the bandgap sensors (Keerthy) - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz) - Add Renesas R-Car maintainer entry (Niklas Söderlund) - Fix error checking after calling ti_bandgap_get_sensor_data() for the TI SoC thermal (Sudip Mukherjee) - Add latency constraint for the idle injection, the DT binding and the change the registering function (Daniel Lezcano) - Convert the thermal framework binding to the Yaml schema (Amit Kucheria) - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A. R. Silva) - Thermal framework cleanups (alphabetic order for heads, replace module.h by export.h, make file naming consistent) (Amit Kucheria) - Merge tsens-common into the tsens driver (Amit Kucheria) - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven) - Clean up the rcar_thermal_update_temp() function in the rcar thermal driver (Niklas Söderlund) - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian Tang) - Export GDDV, OEM vendor variables, and don't require IDSP for the int340x thermal driver - trivial conflicts fixed (Matthew Garrett) * tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits) thermal/int340x_thermal: Don't require IDSP to exist thermal/int340x_thermal: Export OEM vendor variables thermal/int340x_thermal: Export GDDV thermal: qoriq: Update the settings for TMUv2 thermal: rcar_thermal: Clean up rcar_thermal_update_temp() thermal: qoriq: Add platform dependencies drivers: thermal: tsens: Merge tsens-common.c into tsens.c thermal/of: Rename of-thermal.c thermal/governors: Prefix all source files with gov_ thermal/drivers/user_space: Sort headers alphabetically thermal/drivers/of-thermal: Sort headers alphabetically thermal/drivers/cpufreq_cooling: Replace module.h with export.h thermal/drivers/cpufreq_cooling: Sort headers alphabetically thermal/drivers/clock_cooling: Include export.h thermal/drivers/clock_cooling: Sort headers alphabetically thermal/drivers/thermal_hwmon: Include export.h thermal/drivers/thermal_hwmon: Sort headers alphabetically thermal/drivers/thermal_helpers: Include export.h thermal/drivers/thermal_helpers: Sort headers alphabetically thermal/core: Replace module.h with export.h ... |
||
|
Linus Torvalds
|
9433a51ec1 |
pwm: Changes for v5.8-rc1
Nothing too exciting for this cycle. A couple of fixes across the board, and Lee volunteered to help with patch review. -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl7jhQUZHHRoaWVycnku cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoZeGD/4r/owv45JI0iQU05zl9JQi hl4nQQcQqJYIZ2VraEKkpaZ509NYMr1y4wypxRIoezjsVPCbMpBr96Mb+J6IYU1h JV+qIqQgLw7qThjCPs7CltjZUEPjRiU5kyWD3nut5YRUo3V55WzbolYnZrV9UDcu gQ/PTehQ4ujdqENnwjhUlvbtjvCXnMreAHPPiBHzHJ+YesKAvIWLG645EdFpCEIZ hS4/PndU2WwMVcsyYzmVlKfB1bUjGwxGpqD1kSobf+CDxXLv8b9/L+L2eAU/O1om VnzHiGjsu+cnEWQmBV/A9Zwb10QfMiP7sEseFiy7mywqOZCX8GHxcUOhg9eJmXZb 1A4PXAHHhgQayuAnR7u9w5XuC8hMypltPPaCfTdWkc5awBeZ3bgJYGYCR1OAs/7q aoHxtrwpvBlUCGSkBC5WSZdsf1XGBmy3Q0fZr232xKiUxBPeAnkVQS6bjYS7tOUh 1xJrCFKR/BkFs0E4P8zyqRuRieh9GfwnKTw4dHO4QCFYEugXq/VYB/pUaofKoUdz gdFv5Pw73f2RjRK1Kdtc8lBnUa7lulsfP3ewjKdgO+Ob/w0w4o1VN6aJkC6SkHNk aWhhZipFZ4POUWFJVQkRHiTi88UIbMNVPabNlVWZvW6T9+uUKL7bdELbJXxrzzaK sLuKDgpNtSGfn8wu2un0sg== =QI2J -----END PGP SIGNATURE----- Merge tag 'pwm/for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Nothing too exciting for this cycle. A couple of fixes across the board, and Lee volunteered to help with patch review" * tag 'pwm/for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Add missing "CONFIG_" prefix MAINTAINERS: Add Lee Jones as reviewer for the PWM subsystem pwm: imx27: Fix rounding behavior pwm: rockchip: Simplify rockchip_pwm_get_state() pwm: img: Call pm_runtime_put() in pm_runtime_get_sync() failed case pwm: tegra: Support dynamic clock frequency configuration pwm: jz4740: Add support for the JZ4725B pwm: jz4740: Make PWM start with the active part pwm: jz4740: Enhance precision in calculation of duty cycle pwm: jz4740: Drop dependency on MACH_INGENIC pwm: lpss: Fix get_state runtime-pm reference handling pwm: sun4i: Support direct clock output on Allwinner A64 pwm: Add support for Azoteq IQS620A PWM generator dt-bindings: pwm: rcar: add r8a77961 support pwm: Add missing '\n' in log messages |
||
|
Rob Herring
|
4476157015 |
dt-bindings: Remove redundant 'maxItems'
There's no need to specify 'maxItems' with the same value as the number of entries in 'items'. A meta-schema update will catch future cases. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: linux-clk@vger.kernel.org Cc: linux-pwm@vger.kernel.org Cc: linux-usb@vger.kernel.org Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Rob Herring
|
0db958b689 |
dt-bindings: Fix more incorrect 'reg' property sizes in examples
The examples template is a 'simple-bus' with a size of 1 cell for had between 2 and 4 cells which really only errors on I2C or SPI type devices with a single cell. The easiest fix in most cases is to change the 'reg' property to 1 cell for address and size. Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: "David S. Miller" <davem@davemloft.net> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: linux-rockchip@lists.infradead.org Cc: linux-media@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: netdev@vger.kernel.org Cc: alsa-devel@alsa-project.org Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Rob Herring
|
c0eca14c57 |
dt-bindings: phy: qcom: Fix missing 'ranges' and example addresses
The QCom QMP PHY bindings have child nodes with translatable (MMIO)
addresses, so a 'ranges' property is required in the parent node.
Additionally, the examples default to 1 address and size cell, so let's
fix that, too.
Fixes: ccf51c1cedfd ("dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml")
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
||
|
Rob Herring
|
086e9074f5 |
dt-bindings: Remove more cases of 'allOf' containing a '$ref'
Another round of 'allOf' removals that came in this cycle. json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Linus Torvalds
|
2dca74a40e |
- qcom :
new controller driver for IPCC
reorg the of_device data
add support for ipq6018 platform
- spreadtrum:
new sprd controller driver
- imx:
implement suspend/resume PM support
- Misc :
make pcc driver struct as static
fix return value in imx_mu_scu
disable clock before bailout in imx probe
remove duplicate error mssg in zynqmp probe
fix header size in imx.scu
check for null instead of is-err in zynqmp
-----BEGIN PGP SIGNATURE-----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=FpYp
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v5.8' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"qcom:
- new controller driver for IPCC
- reorg the of_device data
- add support for ipq6018 platform
spreadtrum:
- new sprd controller driver
imx:
- implement suspend/resume PM support
misc:
- make pcc driver struct static
- fix return value in imx_mu_scu
- disable clock before bailout in imx probe
- remove duplicate error mssg in zynqmp probe
- fix header size in imx.scu
- check for null instead of is-err in zynqmp"
* tag 'mailbox-v5.8' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: qcom: Add ipq6018 apcs compatible
mailbox: qcom: Add clock driver name in apcs mailbox driver data
dt-bindings: mailbox: Add YAML schemas for QCOM APCS global block
mailbox: imx: ONLY IPC MU needs IRQF_NO_SUSPEND flag
mailbox: imx: Add runtime PM callback to handle MU clocks
mailbox: imx: Add context save/restore for suspend/resume
MAINTAINERS: Add entry for Qualcomm IPCC driver
mailbox: Add support for Qualcomm IPCC
dt-bindings: mailbox: Add devicetree binding for Qcom IPCC
mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe()
mailbox: imx-mailbox: fix scu msg header size check
mailbox: sprd: Add Spreadtrum mailbox driver
dt-bindings: mailbox: Add the Spreadtrum mailbox documentation
mailbox: ZynqMP IPI: Delete an error message in zynqmp_ipi_probe()
mailbox: imx: Disable the clock on devm_mbox_controller_register() failure
mailbox: imx: Fix return in imx_mu_scu_xlate()
mailbox: imx: Support runtime PM
mailbox: pcc: make pcc_mbox_driver static
|
||
|
Linus Torvalds
|
e0154bd478 |
sound fixes for 5.8-rc1
Here are last-minute fixes gathered before merge window close; a few fixes are for the core while the rest majority are driver fixes. * PCM locking annotation fixes and the possible self-lock fix * ASoC DPCM regression fixes with multi-CPU DAI * A fix for inconsistent resume from system-PM on USB-audio * Improved runtime-PM handling with multiple USB interfaces * Quirks for HD-audio and USB-audio * Hardened firmware handling in max98390 codec * A couple of fixes for meson -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl7g7X4OHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE82zBAApvUtJMBFyyEv2tih9cf8Ov2VZ4JRW03uBwla Nyq2KVZl/fxB8unM/fw/RoV+EgCkE/y5wlhdP8bfjDxFom31IZGCLkmqh6Ky2fB4 HJTIKvWE18RZ1aIOf94mCEa+2B2o0/BdSziLWy6WVRQ5+ufKh+/YG73Mavnbkahp ArB3+bqZRqomFsdZPbjAJEhrQgx4kzkAKDnAhZ4xg4bgONPF5nL/b2MmrPifaeXN f2D/j77vntfRAGiVcOK8cavIkwoR228r3fRBXqLAvCy9f/oFyl79a3CxpQyfn0ra hbGxSH8JyWGxFCFK3uYlQV9AbL1Bpwyds9IH9Ddvn9RSBLWXVO7zyHceSiPiH1FZ UDSEnYS2tVzjl4SGn+XPgEUgSoJd2q8x4hBi8Mq1qshEwSeCTAYQHakM9Ccs1JXm LSAcW/NjfIIFsLdew89oNeElGrM+fNQ14w6ZBv0mIFyeLVblHJh3UCLC0DLWuTvr vVcAzv1hCEp/KDfZ5u3er7L6omCPgiKZpBv4LYoeuhlma4UuE1jCZRP8cQ/lw/3I ct9ehpaB1nrJDy5DPex+CIOwD2QoGJwEvtHtnQZTYeAbwMopSbvNINb7ninp0yPB WchFmy5LZhz2lN6ZcPIhLUSvusWcdG3l0fSb65Df79sR1GXQl+h/KajM0M3cL8Fp xUKLnrM= =mTm4 -----END PGP SIGNATURE----- Merge tag 'sound-fix-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are last-minute fixes gathered before merge window close; a few fixes are for the core while the rest majority are driver fixes. - PCM locking annotation fixes and the possible self-lock fix - ASoC DPCM regression fixes with multi-CPU DAI - A fix for inconsistent resume from system-PM on USB-audio - Improved runtime-PM handling with multiple USB interfaces - Quirks for HD-audio and USB-audio - Hardened firmware handling in max98390 codec - A couple of fixes for meson" * tag 'sound-fix-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ASoC: rt5645: Add platform-data for Asus T101HA ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT10-A tablet ASoC: SOF: nocodec: conditionally set dpcm_capture/dpcm_playback flags ASoC: Intel: boards: replace capture_only by dpcm_capture ASoC: core: only convert non DPCM link to DPCM link ASoC: soc-pcm: dpcm: fix playback/capture checks ASoC: meson: add missing free_irq() in error path ALSA: pcm: disallow linking stream to itself ALSA: usb-audio: Manage auto-pm of all bundled interfaces ALSA: hda/realtek - add a pintbl quirk for several Lenovo machines ALSA: pcm: fix snd_pcm_link() lockdep splat ALSA: usb-audio: Use the new macro for HP Dock rename quirks ALSA: usb-audio: Add vendor, product and profile name for HP Thunderbolt Dock ALSA: emu10k1: delete an unnecessary condition dt-bindings: ASoc: Fix tdm-slot documentation spelling error ASoC: meson: fix memory leak of links if allocation of ldata fails ALSA: usb-audio: Fix inconsistent card PM state after resume ASoC: max98390: Fix potential crash during param fw loading ASoC: max98390: Fix incorrect printf qualifier ASoC: fsl-asoc-card: Defer probe when fail to find codec device ... |
||
|
Linus Torvalds
|
0c67f6b297 |
More power management updates for 5.8-rc1
- Add support for interconnect bandwidth to the OPP core (Georgi
Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).
- Add support for regulator enable/disable to the OPP core (Kamil
Konieczny).
- Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).
- Make the tegra186 cpufreq driver set the
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).
- Prevent the ACPI power management from using power resources
with devices where the list of power resources for power state
D0 (full power) is missing (Rafael Wysocki).
- Annotate a hibernation-related function with __init (Christophe
JAILLET).
-----BEGIN PGP SIGNATURE-----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=p5eu
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are operating performance points (OPP) framework updates mostly,
including support for interconnect bandwidth in the OPP core, plus a
few cpufreq changes, including boost support in the CPPC cpufreq
driver, an ACPI device power management fix and a hibernation code
cleanup.
Specifics:
- Add support for interconnect bandwidth to the OPP core (Georgi
Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).
- Add support for regulator enable/disable to the OPP core (Kamil
Konieczny).
- Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).
- Make the tegra186 cpufreq driver set the
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).
- Prevent the ACPI power management from using power resources with
devices where the list of power resources for power state D0 (full
power) is missing (Rafael Wysocki).
- Annotate a hibernation-related function with __init (Christophe
JAILLET)"
* tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Avoid using power resources if there are none for D0
cpufreq: CPPC: add SW BOOST support
cpufreq: change '.set_boost' to act on one policy
PM: hibernate: Add __init annotation to swsusp_header_init()
opp: Don't parse icc paths unnecessarily
opp: Remove bandwidth votes when target_freq is zero
opp: core: add regulators enable and disable
opp: Reorder the code for !target_freq case
opp: Expose bandwidth information via debugfs
cpufreq: dt: Add support for interconnect bandwidth scaling
opp: Update the bandwidth on OPP frequency changes
opp: Add sanity checks in _read_opp_key()
opp: Add support for parsing interconnect bandwidth
cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
OPP: Add helpers for reading the binding properties
dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
|
||
|
Linus Torvalds
|
49f13b0921 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - a new driver for the Azoteq IQS269A capacitive touch controller - a new driver for the Cypress CY8CTMA140 touchscreen - updates to Elan and ft5x06 touchscreen drivers - assorted driver fixes - msm-vibrator has been removed as we have a more generic solution * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits) Input: adi - work around module name confict Input: iqs269a - add missing I2C dependency Input: elants - refactor elants_i2c_execute_command() Input: elants - override touchscreen info with DT properties Input: elants - remove unused axes Input: add support for Azoteq IQS269A dt-bindings: input: Add bindings for Azoteq IQS269A Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups Input: remove msm-vibrator driver dt-bindings: Input: remove msm-vibrator Input: elants_i2c - provide an attribute to show calibration count Input: introduce input_mt_report_slot_inactive() dt-bindings: input: touchscreen: elants_i2c: convert to YAML Input: add driver for the Cypress CY8CTMA140 touchscreen dt-bindings: touchscreen: Add CY8CTMA140 bindings Input: edt-ft5x06 - prefer asynchronous probe Input: edt-ft5x06 - improve power management operations Input: edt-ft5x06 - move parameter restore into helper Input: edt-ft5x06 - fix get_default register write access Input: atkbd - receive and use physcode->keycode mapping from FW ... |
||
|
Linus Torvalds
|
6f51ab9440 |
MTD core changes:
* partition parser: Support MTD names containing one or more colons.
* mtdblock: clear cache_state to avoid writing to bad blocks repeatedly.
Raw NAND core changes:
* Stop using nand_release(), patched all drivers.
* Give more information about the ECC weakness when not matching the
chip's requirement.
* MAINTAINERS updates.
* Support emulated SLC mode on MLC NANDs.
* Support "constrained" controllers, adapt the core and ONFI/JEDEC
table parsing and Micron's code.
* Take check_only into account.
* Add an invalid ECC mode to discriminate with valid ones.
* Return an enum from of_get_nand_ecc_algo().
* Drop OOB_FIRST placement scheme.
* Introduce nand_extract_bits().
* Ensure a consistent bitflips numbering.
* BCH lib:
- Allow easy bit swapping.
- Rework a little bit the exported function names.
* Fix nand_gpio_waitrdy().
* Propage CS selection to sub operations.
* Add a NAND_NO_BBM_QUIRK flag.
* Give the possibility to verify a read operation is supported.
* Add a helper to check supported operations.
* Avoid indirect access to ->data_buf().
* Rename the use_bufpoi variables.
* Fix comments about the use of bufpoi.
* Rename a NAND chip option.
* Reorder the nand_chip->options flags.
* Translate obscure bitfields into readable macros.
* Timings:
- Fix default values.
- Add mode information to the timings structure.
Raw NAND controller driver changes:
* Fixed many error paths.
* Arasan
- New driver
* Au1550nd:
- Various cleanups
- Migration to ->exec_op()
* brcmnand:
- Misc cleanup.
- Support v2.1-v2.2 controllers.
- Remove unused including <linux/version.h>.
- Correctly verify erased pages.
- Fix Hamming OOB layout.
* Cadence
- Make cadence_nand_attach_chip static.
* Cafe:
- Set the NAND_NO_BBM_QUIRK flag
* cmx270:
- Remove this controller driver.
* cs553x:
- Misc cleanup
- Migration to ->exec_op()
* Davinci:
- Misc cleanup.
- Migration to ->exec_op()
* Denali:
- Add more delays before latching incoming data
* Diskonchip:
- Misc cleanup
- Migration to ->exec_op()
* Fsmc:
- Change to non-atomic bit operations.
* GPMI:
- Use nand_extract_bits()
- Fix runtime PM imbalance.
* Ingenic:
- Migration to exec_op()
- Fix the RB gpio active-high property on qi, lb60
- Make qi_lb60_ooblayout_ops static.
* Marvell:
- Misc cleanup and small fixes
* Nandsim:
- Fix the error paths, driver wide.
* Omap_elm:
- Fix runtime PM imbalance.
* STM32_FMC2:
- Misc cleanups (error cases, comments, timeout valus, cosmetic
changes).
SPI NOR core changes:
* Add, update support and fix few flashes.
* Prepare BFPT parsing for JESD216 rev D.
* Kernel doc fixes.
CFI changes:
* Support the absence of protection registers for Intel CFI flashes.
* Replace zero-length array with flexible-arrays.
-----BEGIN PGP SIGNATURE-----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=2M9Y
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Richard Weinberger:
"MTD core changes:
- partition parser: Support MTD names containing one or more colons.
- mtdblock: clear cache_state to avoid writing to bad blocks
repeatedly.
Raw NAND core changes:
- Stop using nand_release(), patched all drivers.
- Give more information about the ECC weakness when not matching the
chip's requirement.
- MAINTAINERS updates.
- Support emulated SLC mode on MLC NANDs.
- Support "constrained" controllers, adapt the core and ONFI/JEDEC
table parsing and Micron's code.
- Take check_only into account.
- Add an invalid ECC mode to discriminate with valid ones.
- Return an enum from of_get_nand_ecc_algo().
- Drop OOB_FIRST placement scheme.
- Introduce nand_extract_bits().
- Ensure a consistent bitflips numbering.
- BCH lib:
- Allow easy bit swapping.
- Rework a little bit the exported function names.
- Fix nand_gpio_waitrdy().
- Propage CS selection to sub operations.
- Add a NAND_NO_BBM_QUIRK flag.
- Give the possibility to verify a read operation is supported.
- Add a helper to check supported operations.
- Avoid indirect access to ->data_buf().
- Rename the use_bufpoi variables.
- Fix comments about the use of bufpoi.
- Rename a NAND chip option.
- Reorder the nand_chip->options flags.
- Translate obscure bitfields into readable macros.
- Timings:
- Fix default values.
- Add mode information to the timings structure.
Raw NAND controller driver changes:
- Fixed many error paths.
- Arasan
- New driver
- Au1550nd:
- Various cleanups
- Migration to ->exec_op()
- brcmnand:
- Misc cleanup.
- Support v2.1-v2.2 controllers.
- Remove unused including <linux/version.h>.
- Correctly verify erased pages.
- Fix Hamming OOB layout.
- Cadence
- Make cadence_nand_attach_chip static.
- Cafe:
- Set the NAND_NO_BBM_QUIRK flag
- cmx270:
- Remove this controller driver.
- cs553x:
- Misc cleanup
- Migration to ->exec_op()
- Davinci:
- Misc cleanup.
- Migration to ->exec_op()
- Denali:
- Add more delays before latching incoming data
- Diskonchip:
- Misc cleanup
- Migration to ->exec_op()
- Fsmc:
- Change to non-atomic bit operations.
- GPMI:
- Use nand_extract_bits()
- Fix runtime PM imbalance.
- Ingenic:
- Migration to exec_op()
- Fix the RB gpio active-high property on qi, lb60
- Make qi_lb60_ooblayout_ops static.
- Marvell:
- Misc cleanup and small fixes
- Nandsim:
- Fix the error paths, driver wide.
- Omap_elm:
- Fix runtime PM imbalance.
- STM32_FMC2:
- Misc cleanups (error cases, comments, timeout valus, cosmetic
changes).
SPI NOR core changes:
- Add, update support and fix few flashes.
- Prepare BFPT parsing for JESD216 rev D.
- Kernel doc fixes.
CFI changes:
- Support the absence of protection registers for Intel CFI flashes.
- Replace zero-length array with flexible-arrays"
* tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (208 commits)
mtd: clear cache_state to avoid writing to bad blocks repeatedly
mtd: parser: cmdline: Support MTD names containing one or more colons
mtd: physmap_of_gemini: remove defined but not used symbol 'syscon_match'
mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones
mtd: rawnand: Return an enum from of_get_nand_ecc_algo()
mtd: rawnand: Drop OOB_FIRST placement scheme
mtd: rawnand: Avoid a typedef
mtd: Fix typo in mtd_ooblayout_set_databytes() description
mtd: rawnand: Stop using nand_release()
mtd: rawnand: nandsim: Reorganize ns_cleanup_module()
mtd: rawnand: nandsim: Rename a label in ns_init_module()
mtd: rawnand: nandsim: Manage lists on error in ns_init_module()
mtd: rawnand: nandsim: Fix the label pointing on nand_cleanup()
mtd: rawnand: nandsim: Free erase_block_wear on error
mtd: rawnand: nandsim: Use an additional label when freeing the nandsim object
mtd: rawnand: nandsim: Stop using nand_release()
mtd: rawnand: nandsim: Free the partition names in ns_free()
mtd: rawnand: nandsim: Free the allocated device on error in ns_init()
mtd: rawnand: nandsim: Free partition names on error in ns_init()
mtd: rawnand: nandsim: Fix the two ns_alloc_device() error paths
...
|
||
|
Linus Torvalds
|
6f630784cc |
This time around we have 4 lines of diff in the core framework, removing a
function that isn't used anymore. Otherwise the main new thing for the common
clk framework is that it is selectable in the Kconfig language now. Hopefully
this will let clk drivers and clk consumers be testable on more than the
architectures that support the clk framework. The goal is to introduce some
Kunit tests for the framework.
Outside of the core framework we have the usual set of various driver updates
and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the
largest addition this time around in terms of lines of code. After that the x86
(Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or
upcoming SoCs. After that the dirstat shows the usual suspects working on their
SoC support by fixing minor bugs, correcting data and converting some of their
DT bindings to YAML.
Core:
- Allow the COMMON_CLK config to be selectable
New Drivers:
- Clk driver for Baikal-T1 SoCs
- Mediatek MT6765 clock support
- Support for Intel Agilex clks
- Add support for X1830 and X1000 Ingenic SoC clk controllers
- Add support for the new Renesas RZ/G1H (R8A7742) SoC
- Add support for Qualcomm's MSM8939 Generic Clock Controller
Updates:
- Support IDT VersaClock 5P49V5925
- Bunch of updates for HSDK clock generation unit (CGU) driver
- Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
- Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
- Enable supply regulators for GPU gdscs on Qualcomm SoCs
- Add support for Si5342, Si5344 and Si5345 chips
- Support custom flags in Xilinx zynq firmware
- Various small fixes to the Xilinx clk driver
- A single minor rounding fix for the legacy Allwinner clock support
- A few patches from Abel Vesa as preparation of adding audiomix clock support
on i.MX
- A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3
drivers
- Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on
aarch64 hardware
- A series from Peng Fan to improve i.MX8M clock drivers, using composite
clock for core and bus clk slice
- Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined
bit rates
- A couple changes for EMC frequency scaling on Tegra210
- Support for CPU frequency scaling on Tegra20/Tegra30
- New clk gate for CSI test pattern generator on Tegra210
- Regression fixes for Samsung exynos542x and exynos5433 SoCs
- Use of fallthrough; attribute for Samsung s3c24xx
- Updates and fixup HDMI and video clocks on Meson8b
- Fixup reset polarity on Meson8b
- Fix GPU glitch free mux switch on Meson gx and g12
- A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2
- Two more conversions of Renesas DT bindings to json-schema
- Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+
-----BEGIN PGP SIGNATURE-----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=nuG5
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This time around we have four lines of diff in the core framework,
removing a function that isn't used anymore. Otherwise the main new
thing for the common clk framework is that it is selectable in the
Kconfig language now. Hopefully this will let clk drivers and clk
consumers be testable on more than the architectures that support the
clk framework. The goal is to introduce some Kunit tests for the
framework.
Outside of the core framework we have the usual set of various driver
updates and non-critical fixes. The dirstat shows that the new
Baikal-T1 driver is the largest addition this time around in terms of
lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
drivers introduce many lines to support new or upcoming SoCs. After
that the dirstat shows the usual suspects working on their SoC support
by fixing minor bugs, correcting data and converting some of their DT
bindings to YAML.
Core:
- Allow the COMMON_CLK config to be selectable
New Drivers:
- Clk driver for Baikal-T1 SoCs
- Mediatek MT6765 clock support
- Support for Intel Agilex clks
- Add support for X1830 and X1000 Ingenic SoC clk controllers
- Add support for the new Renesas RZ/G1H (R8A7742) SoC
- Add support for Qualcomm's MSM8939 Generic Clock Controller
Updates:
- Support IDT VersaClock 5P49V5925
- Bunch of updates for HSDK clock generation unit (CGU) driver
- Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
- Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
- Enable supply regulators for GPU gdscs on Qualcomm SoCs
- Add support for Si5342, Si5344 and Si5345 chips
- Support custom flags in Xilinx zynq firmware
- Various small fixes to the Xilinx clk driver
- A single minor rounding fix for the legacy Allwinner clock support
- A few patches from Abel Vesa as preparation of adding audiomix
clock support on i.MX
- A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
clk-pllv3 drivers
- Drop dependency on ARM64 for i.MX8M clock driver, to support
aarch32 mode on aarch64 hardware
- A series from Peng Fan to improve i.MX8M clock drivers, using
composite clock for core and bus clk slice
- Set a better parent clock for flexcan on i.MX6UL to support CiA102
defined bit rates
- A couple changes for EMC frequency scaling on Tegra210
- Support for CPU frequency scaling on Tegra20/Tegra30
- New clk gate for CSI test pattern generator on Tegra210
- Regression fixes for Samsung exynos542x and exynos5433 SoCs
- Use of fallthrough; attribute for Samsung s3c24xx
- Updates and fixup HDMI and video clocks on Meson8b
- Fixup reset polarity on Meson8b
- Fix GPU glitch free mux switch on Meson gx and g12
- A minor fix for the currently unused suspend/resume handling on
Renesas RZ/A1 and RZ/A2
- Two more conversions of Renesas DT bindings to json-schema
- Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
clk: mediatek: Remove ifr{0,1}_cfg_regs structures
clk: baikal-t1: remove redundant assignment to variable 'divider'
clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
dt-bindings: clock: Add a missing include to MMP Audio Clock binding
dt: Add bindings for IDT VersaClock 5P49V5925
clk: vc5: Add support for IDT VersaClock 5P49V6965
clk: Add Baikal-T1 CCU Dividers driver
clk: Add Baikal-T1 CCU PLLs driver
dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
clk: mediatek: assign the initial value to clk_init_data of mtk_mux
clk: mediatek: Add MT6765 clock support
clk: mediatek: add mt6765 clock IDs
dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
CLK: HSDK: CGU: add support for 148.5MHz clock
CLK: HSDK: CGU: support PLL bypassing
CLK: HSDK: CGU: check if PLL is bypassed first
clk: clk-si5341: Add support for the Si5345 series
...
|
||
|
Linus Torvalds
|
3a2a875174 |
power supply and reset changes for the v5.8 series
kobject:
* Increase number of allowed uevent variables
power-supply core:
* Add power-supply type in uevent
* Cleanup property handling in core
* Make property and usb_type pointers const
* Convert core power-supply DT binding to YAML
* Cleanup HWMON code
* Add new health status "calibration required"
* Add new properties for manufacture date and
capacity error margin
battery drivers:
* new cw2015 battery driver used by pine64 Pinebook Pro laptop
* axp22: blacklist on Meegopad T02
* sc27xx: support current/voltage reading
* max17042: support time-to-empty reading
* simple-battery: add more battery parameters
* bq27xxx: convert DT binding document to YAML
* sbs-battery: add TI BQ20Z65 support, fix technology property, convert
DT binding to YAML, add option to disable charger
broadcasts, add new properties: manufacture date,
capacity error margin, average current, charge current
and voltage and support calibration required health
status
* misc. fixes
charger drivers:
* bq25890: cleanup, implement charge type, precharge current and input
current limiting properties
* bd70528: use new linear range helper library
* bd99954: new charger driver
* mp2629: new charger driver
* misc. fixes
reboot drivers:
* oxnas-restart: introduce new driver
* syscon-reboot: convert DT binding to YAML, add parent syscon device support
* misc. fixes
-----BEGIN PGP SIGNATURE-----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=He9L
-----END PGP SIGNATURE-----
Merge tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"This time there are lots of changes. Quite a few changes to the core,
lots of driver changes and one change to kobject core (with Ack from
Greg).
Summary:
kobject:
- Increase number of allowed uevent variables
power-supply core:
- Add power-supply type in uevent
- Cleanup property handling in core
- Make property and usb_type pointers const
- Convert core power-supply DT binding to YAML
- Cleanup HWMON code
- Add new health status "calibration required"
- Add new properties for manufacture date and capacity error margin
battery drivers:
- new cw2015 battery driver used by pine64 Pinebook Pro laptop
- axp22: blacklist on Meegopad T02
- sc27xx: support current/voltage reading
- max17042: support time-to-empty reading
- simple-battery: add more battery parameters
- bq27xxx: convert DT binding document to YAML
- sbs-battery: add TI BQ20Z65 support, fix technology property,
convert DT binding to YAML, add option to disable charger
broadcasts, add new properties: manufacture date, capacity
error margin, average current, charge current and voltage and
support calibration required health status
- misc fixes
charger drivers:
- bq25890: cleanup, implement charge type, precharge current and
input current limiting properties
- bd70528: use new linear range helper library
- bd99954: new charger driver
- mp2629: new charger driver
- misc fixes
reboot drivers:
- oxnas-restart: introduce new driver
- syscon-reboot: convert DT binding to YAML, add parent syscon device
support
- misc fixes"
* tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits)
power: supply: cw2015: Attach OF ID table to the driver
power: reset: gpio-poweroff: add missing '\n' in dev_err()
Revert "power: supply: sbs-battery: simplify read_read_string_data"
Revert "power: supply: sbs-battery: add PEC support"
dt-bindings: power: sbs-battery: Convert to yaml
power: supply: sbs-battery: constify power-supply property array
power: supply: sbs-battery: switch to i2c's probe_new
power: supply: sbs-battery: switch from of_property_* to device_property_*
power: supply: sbs-battery: add ability to disable charger broadcasts
power: supply: sbs-battery: fix idle battery status
power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support
power: supply: sbs-battery: add MANUFACTURE_DATE support
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support
power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support
power: supply: sbs-battery: add PEC support
power: supply: sbs-battery: simplify read_read_string_data
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support
power: supply: sbs-battery: Add TI BQ20Z65 support
power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED
...
|
||
|
Linus Torvalds
|
c90e7945e3 |
dmaengine updates for v5.8-rc1
Bunch of updates to drivers like dmatest, dw-edma, ioat, mmp-tdma and k3-udma along with Renesas binding update to json-schema -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl7fdVEACgkQfBQHDyUj g0e7PBAAhtKUb1hbx9OR9Wm4l0ZPgheip0Ai8zWjAXaM0au/OhGbYrss7ilRySYL ORUZqCp0/972w7oyHeHeNu2gxvbg8ouYCSTEftF4v78UPToYmoVYjUHVgxyLEeQ4 i+B/K2sa96WYa0D64T3cDi7Vmf61ouB86Do7iIU8LZJuiS18Smyz5dfAUNCWZ7br rREDnJ6QPjoWMpdz/toYkYxChBWN7td8Zve1u0LUEFXt/OG6jpfv4Dg2jJ+j5E4V TGmV5p+7YVpuxmi1ab/MEOTWdG1rckhr85/+Fxy55V+BH8GaU5GEzeFg/5gIwypp it4dbPRq/fUPmuuWA+o2BYDC3ytJuFP/UQkCvxazT1OQS5xSHFHZXQYKOkRGZWln jNGML2CTTRe4JvRDU1rlLtQjSjlyF9Gt/5fRYkJQsJYByJhpvgp1+Fsuv8e2TFGX hhPH/RJJ04nhyHMjH6WBea+3BiUDHk9nxTPxeefu3tpF779vYmBXgO70thYt+J7d oJwegyfwJmgv7ZyItgQC+oo9AOVyByXrELuPgbFxHCnxNXjE8Xzu7lxjI3SX1zn2 1tFX7yqJamR0s7EFwMDVBsG2SqUr/XKmruEUxt+VWIM/UjDrVvDPnqQ0koziRNV6 dWClV/+QuOXKo349bDQUMjUp7gBub6lHCIJ2U428Y/pckgsOWac= =Jun4 -----END PGP SIGNATURE----- Merge tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine updates from Vinod Koul: "A fairly small dmaengine update which includes mostly driver updates (dmatest, dw-edma, ioat, mmp-tdma and k3-udma) along with Renesas binding update to json-schema" * tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (39 commits) dmaengine: imx-sdma: initialize all script addresses dmaengine: ti: k3-udma: Use proper return code in alloc_chan_resources dmaengine: ti: k3-udma: Remove udma_chan.in_ring_cnt dmaengine: ti: k3-udma: Add missing dma_sync call for rx flush descriptor dmaengine: at_xdmac: Replace zero-length array with flexible-array dmaengine: at_hdmac: Replace zero-length array with flexible-array dmaengine: qcom: bam_dma: Replace zero-length array with flexible-array dmaengine: ti: k3-udma: Use PTR_ERR_OR_ZERO() to simplify code dmaengine: moxart-dma: Drop pointless static qualifier in moxart_probe() dmaengine: sf-pdma: Simplify the error handling path in 'sf_pdma_probe()' dmaengine: qcom_hidma: use true,false for bool variable dmaengine: dw-edma: support local dma device transfer semantics dmaengine: Fix doc strings to satisfy validation script dmaengine: Include dmaengine.h into dmaengine.c dmaengine: dmatest: Describe members of struct dmatest_info dmaengine: dmatest: Describe members of struct dmatest_params dmaengine: dmatest: Allow negative timeout value to specify infinite wait Revert "dmaengine: dmatest: timeout value of -1 should specify infinite wait" dmaengine: stm32-dma: direct mode support through device tree dt-bindings: dma: add direct mode support through device tree in stm32-dma ... |
||
|
Rafael J. Wysocki
|
4c277e2f85 |
Merge branch 'pm-opp'
* pm-opp: opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth interconnect: Remove unused module exit code from core interconnect: Disallow interconnect core to be built as a module interconnect: Add of_icc_get_by_index() helper function OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings |
||
|
Takashi Iwai
|
a4f55d927d |
ASoC: Fixes for v5.8
A small pile of fixes that came in during the merge window, the DPCM fixes from Pierre are the most notable thing here. -----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7g12QTHGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0I9pB/42+qaKeg76La/Hj4CEKcAUzQC6//7c /smuurPeSic0h/dFTAxkDu1uh9Nn1LqN29rj6Toqr0ahaSXOcpbaJAzNd/dB5rJS Ugsz2vMPbD5o4hH632tlgu92qSlcyYzSz57opMdhoM4tkb7vB2euKc4QLZXoKBFi 7W5r5DesKtQmDFdm32SiXtK6dOuZlU6g7r5x3VflJ5Z1FMmlK3Oodppk3K+//GK7 ubfF32yy+Eh/90eGpwn8qTkqIDOdWBqWtNQ8HB/oeXqXBuZ5bKc0Jmdrz/sH1rW0 M90LuwwxKwFC+MhWzCPtqh4N1FZVUh3Zk/hFpZgdAs3IFc+QKvRd/C8w =C1Dw -----END PGP SIGNATURE----- Merge tag 'asoc-fix-v5.8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.8 A small pile of fixes that came in during the merge window, the DPCM fixes from Pierre are the most notable thing here. |
||
|
Alexander Stein
|
a575357b64
|
spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a
spi@13000: clock-names: Additional items are not allowed ('pclk' was unexpected)
spi@13000: clock-names: ['core', 'pclk'] is too long
spi@13000: clocks: [[2, 23], [2, 258]] is too long
spi@15000: clock-names: Additional items are not allowed ('pclk' was unexpected)
spi@15000: clock-names: ['core', 'pclk'] is too long
spi@15000: clocks: [[2, 29], [2, 261]] is too long
Conditional schema properties don't overwrite others. Instead of
restrictions have to be validated. So general clock amount is 1-2 and
depending on the actual device type limit the mount to 1 or 2.
Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Link: https://lore.kernel.org/r/20200609165527.55183-1-alexander.stein@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
||
|
Lubomir Rintel
|
30b239686b |
dt-bindings: clock: Add a missing include to MMP Audio Clock binding
The include file for input clock in the example was missing, breaking the validation. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reported-by: Rob Herring <robh+dt@kernel.org> Link: https://lore.kernel.org/r/20200605065258.567858-1-lkundrak@v3.sk Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Linus Torvalds
|
abfbb29297 |
remoteproc updates for v5.8
This introduces device managed versions of functions used to register remoteproc devices, add support for remoteproc driver specific resource control, enables remoteproc drivers to specify ELF class and machine for coredumps. It integrates pm_runtime in the core for keeping resources active while the remote is booted and holds a wake source while recoverying a remote processor after a firmware crash. It refactors the remoteproc device's allocation path to simplify the logic, fix a few cleanup bugs and to not clone const strings onto the heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a zero-length array is replaced with flexible-array. A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm SM8250 gains support for audio, compute and sensor remoteprocs and the Qualcomm SC7180 modem support is cleaned up and improved. The Qualcomm glink subsystem-restart driver is merged into the main glink driver, the Qualcomm sysmon driver is extended to properly notify remote processors about all other remote processors' state transitions. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl7egk0bHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FQnwQAM781m7BqSKdtbH0OzGB K4jGX/IkWCEluXx/RuDbPFV0mx/yLOfsrSzBBYnnTl+CXTgSLFtImRvwx5BFbnAl bRNbSlw1GLiV/w+HceIx1iKTELnkHKp4TT3zUmR+dZ+7pT1dhWXzHIjyjJPC1c7R L8qg3qlOrM620y3OJNUo57/20Tg9WN6kBKdaeyJKjmBsENrw6wggY30ijqhMgCYr 9LgStPjtuSGgf4j55+BeTskVSnOvuun5NlVpRUVTo+ZDKTZAyO/8TKM+yWffAHc5 7WkK0z9E3lhwdNPLif+dSIvhLjiyKR2yJf5KP7n9mFhA1tRVqNXnJqMCnAnwVvzT IpL1INYbirRwPfayhCsUSwKDTKkckKP9I/vZ7WKWJD9SWcc4eGWIifNDNGkMQ6qV 7S0+6AyCANBltRPKTl6zwXSrrHuBUNkH3r9gddT5tPJu7Klh+fjKEywpsXkUd+IY Xo1nuT+mYrUgif0KTh656EK6YM5dFuVnZqOszzgiVUrdKeHKYBsUjWD7vS7DBeLe pLiDfo0qMb/J0sPptMt+0Rg/b/Nt1YiddW3ZlnVmWRCRjIQRJt9LQZcQoVhVv1Sa OQkhlvFTqIEFJfLtvp83zvL5WngxVM5Dq6mDiesAjZUhyode9ZtOGxr9zyhA4ApU njqp4n16OxcXaqjwp+k6eK8L =4k54 -----END PGP SIGNATURE----- Merge tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This introduces device managed versions of functions used to register remoteproc devices, add support for remoteproc driver specific resource control, enables remoteproc drivers to specify ELF class and machine for coredumps. It integrates pm_runtime in the core for keeping resources active while the remote is booted and holds a wake source while recoverying a remote processor after a firmware crash. It refactors the remoteproc device's allocation path to simplify the logic, fix a few cleanup bugs and to not clone const strings onto the heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a zero-length array is replaced with flexible-array. A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm SM8250 gains support for audio, compute and sensor remoteprocs and the Qualcomm SC7180 modem support is cleaned up and improved. The Qualcomm glink subsystem-restart driver is merged into the main glink driver, the Qualcomm sysmon driver is extended to properly notify remote processors about all other remote processors' state transitions" * tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits) remoteproc: Fix an error code in devm_rproc_alloc() MAINTAINERS: Add myself as reviewer for Ingenic rproc driver remoteproc: ingenic: Added remoteproc driver remoteproc: Add support for runtime PM dt-bindings: Document JZ47xx VPU auxiliary processor remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev() remoteproc: Fix and restore the parenting hierarchy for vdev remoteproc: Fall back to using parent memory pool if no dedicated available remoteproc: Replace zero-length array with flexible-array remoteproc: wcss: add support for rpmsg communication remoteproc: core: Prevent system suspend during remoteproc recovery remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs remoteproc: qcom: pas: Add SM8250 PAS remoteprocs dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region dt-bindings: remoteproc: qcom: Use memory-region to reference memory remoteproc: qcom: pas: Add SC7180 Modem support ... |
||
|
Linus Torvalds
|
4e3a16ee91 |
IOMMU Updates for Linux v5.8
Including:
- A big part of this is a change in how devices get connected to
IOMMUs in the core code. It contains the change from the old
add_device()/remove_device() to the new
probe_device()/release_device() call-backs. As a result
functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group
allocation for each device.
The reason for this change was to get more robust allocation
of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into
the IOMMU tree, but there are no known bugs left. The last fix
is applied on-top of the merge commit for the topic branches.
- Removal of the driver private domain handling in the Intel
VT-d driver. This was fragile code and I am glad it is gone
now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the
Intel VT-d driver
- Replacement of the Intel SVM interfaces to the common
IOMMU SVA API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that
it can be claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain
type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by
Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of
IOMMU core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=a4z4
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"A big part of this is a change in how devices get connected to IOMMUs
in the core code. It contains the change from the old add_device() /
remove_device() to the new probe_device() / release_device()
call-backs.
As a result functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group allocation
for each device. The reason for this change was to get more robust
allocation of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into the IOMMU
tree, but there are no known bugs left. The last fix is applied on-top
of the merge commit for the topic branches.
Other than that change, we have:
- Removal of the driver private domain handling in the Intel VT-d
driver. This was fragile code and I am glad it is gone now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the Intel VT-d
driver
- Replacement of the Intel SVM interfaces to the common IOMMU SVA
API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that it can be
claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of IOMMU
core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
* tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (109 commits)
iommu: Check for deferred attach in iommu_group_do_dma_attach()
iommu/amd: Remove redundant devid checks
iommu/amd: Store dev_data as device iommu private data
iommu/amd: Merge private header files
iommu/amd: Remove PD_DMA_OPS_MASK
iommu/amd: Consolidate domain allocation/freeing
iommu/amd: Free page-table in protection_domain_free()
iommu/amd: Allocate page-table in protection_domain_init()
iommu/amd: Let free_pagetable() not rely on domain->pt_root
iommu/amd: Unexport get_dev_data()
iommu/vt-d: Fix compile warning
iommu/vt-d: Remove real DMA lookup in find_domain
iommu/vt-d: Allocate domain info for real DMA sub-devices
iommu/vt-d: Only clear real DMA device's context entries
iommu: Remove iommu_sva_ops::mm_exit()
uacce: Remove mm_exit() op
iommu/sun50i: Constify sun50i_iommu_ops
iommu/hyper-v: Constify hyperv_ir_domain_ops
iommu/vt-d: Use pci_ats_supported()
iommu/arm-smmu-v3: Use pci_ats_supported()
...
|
||
|
Sivaprakash Murugesan
|
f3a1381ec8 |
dt-bindings: mailbox: Add YAML schemas for QCOM APCS global block
Qualcomm APCS global block provides a bunch of generic properties which are required in a device tree. Add YAML schema for these properties. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
||
|
Linus Torvalds
|
cf0c97f148 |
This is the bulk of pin control changes for the v5.8
kernel cycle. New drivers: - Intel Jasper Lake support. - NXP Freescale i.MX8DXL support. - Qualcomm SM8250 support. - Renesas R8A7742 SH-PFC support. Driver improvements: - Severe cleanup and modernization of the MCP23s08 driver. - Mediatek driver modularized. - Setting config supported in the Meson driver. - Wakeup support for the Broadcom BCM7211. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl7dZC4ACgkQQRCzN7AZ XXOEZg/9F4dCwXmMxMxbS1c7DSHxsJTEHYKDDgAZ0L36N2DHihpMGbVQFzEe9khK xeSS8M4ecACYzw3FJGESaEC+fmTZ7zxr60SR++iyJJptooKAmcA00d2M/4VQ4ggN P/nXFEsGJvQ7nNJSO95wXr5K8aVkQW7rjo1cnblXH0c9dYOp+ItyodIytKcdWeZ9 QfWSovYd+Oqra0braxx+pM/iTFVf6eOoCFZ8gkXB35pORsZ4Vl/e8pXMHXc3wUUm S1b6e3fifLiEGANvCEXz47/f3lUmUY26FsCSCAt92tHChq/p6coIKKvKyP4723PF R2L03iO8jMfsX+HwL2ivblSZ/lFExEgalWET56aogZClRQVynC0NMOnDEdluYGaT XJZPib9sRqQOF36+G9Bcy4zlqjj1LoHwqpiCdAhtj3AACTKdoLjDK0sJ3Wn5E8lJ QfIb+oqOmOGNHN/fdSsxsNM1ptOqNb/sW2Gk4O+X9tYzG17m16oZEVkrv4FNhmeC mePl/7aX+aMoHkEYxvt9tF3kRDFbndcuHdNFtRxq0Tx9jELiR91ySjjs9bUr2Vnl kkihtfIMZngQjBgHe2PNlcF2t7gSIgSBVEvwxslcUlx3XvVEDP16RKJV52aL80uu ev4k0h72CTxI1lZuNuW4cJYDKF/wJPqPtQ8+GQfOZxG7yuM8tOc= =3UGk -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.8 kernel cycle. It's just really boring this time. Zero core changes. Just linear development, cleanups and misc noncritical fixes. Some new drivers for very new Qualcomm and Intel chips. New drivers: - Intel Jasper Lake support. - NXP Freescale i.MX8DXL support. - Qualcomm SM8250 support. - Renesas R8A7742 SH-PFC support. Driver improvements: - Severe cleanup and modernization of the MCP23s08 driver. - Mediatek driver modularized. - Setting config supported in the Meson driver. - Wakeup support for the Broadcom BCM7211" * tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: sprd: Fix the incorrect pull-up definition pinctrl: pxa: pxa2xx: Remove 'pxa2xx_pinctrl_exit()' which is unused and broken pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()' pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()' pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe() pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()' pinctrl: bcm2835: Add support for wake-up interrupts pinctrl: bcm2835: Match BCM7211 compatible string dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts dt-bindings: pinctrl: Document 7211 compatible for brcm, bcm2835-gpio.txt dt-bindings: pinctrl: stm32: Add missing interrupts property pinctrl: at91-pio4: Add COMPILE_TEST support pinctrl: Fix return value about devm_platform_ioremap_resource() MAINTAINERS: Renesas Pin Controllers are supported dt-bindings: pinctrl: ocelot: Add Sparx5 SoC support pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2 pinctrl: ocelot: Remove instance number from pin functions pinctrl: ocelot: Always register GPIO driver dt-bindings: pinctrl: rockchip: update example pinctrl: amd: Add ACPI dependency ... |
||
|
Linus Torvalds
|
9aa900c809 |
Char/Misc driver patches for 5.8-rc1
Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea i5RblCmcVMqvHaGtYkY+ =tScN -----END PGP SIGNATURE----- Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ... |
||
|
Linus Torvalds
|
80ef846e99 |
Staging/IIO driver patches for 5.8-rc1
Here is the large set of staging and IIO driver changes for 5.8-rc1 Nothing major, but a lot of new IIO drivers are included in here, along with other core iio cleanups and changes. On the staging driver front, again, nothing noticable. No new deletions or additions, just a ton of tiny cleanups all over the tree done by a lot of different people. Most coding style, but many actual real fixes and cleanups that are nice to see. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzoAQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ym9FwCgkW8WZJGnvHLjuuG8C01azCEh/KUAoJRji8jK 4zCG8NxAPFsQ1QP2SZPq =jEyw -----END PGP SIGNATURE----- Merge tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver updates from Greg KH: "Here is the large set of staging and IIO driver changes for 5.8-rc1 Nothing major, but a lot of new IIO drivers are included in here, along with other core iio cleanups and changes. On the staging driver front, again, nothing noticable. No new deletions or additions, just a ton of tiny cleanups all over the tree done by a lot of different people. Most coding style, but many actual real fixes and cleanups that are nice to see. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits) staging: rtl8723bs: Use common packet header constants staging: sm750fb: Add names to proc_setBLANK args staging: most: usb: init return value in default path of switch/case expression staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason staging: vchiq: move vchiq_release_message() into vchiq staging: vchi: Get rid of C++ guards staging: vchi: Get rid of not implemented function declarations staging: vchi: Get rid of vchiq_status_to_vchi() staging: vchi: Get rid of vchi_service_set_option() staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message() staging: vchiq: Move copy callback handling into vchiq staging: vchi: Get rid of vchi_queue_user_message() staging: vchi: Get rid of vchi_service_destroy() staging: most: usb: use function sysfs_streq staging: most: usb: add missing put_device calls staging: most: usb: use correct error codes staging: most: usb: replace code to calculate array index staging: most: usb: don't use error path to exit function on success staging: most: usb: move allocation of URB out of critical section staging: most: usb: return 0 instead of variable ... |