To avoid leakage for QPs assocoated with SRQ, according to IB spec
(section 10.3.1):
"Note, for QPs that are associated with an SRQ, the Consumer should take
the QP through the Error State before invoking a Destroy QP or a Modify
QP to the Reset State. The Consumer may invoke the Destroy QP without
first performing a Modify QP to the Error State and waiting for the Affiliated
Asynchronous Last WQE Reached Event. However, if the Consumer
does not wait for the Affiliated Asynchronous Last WQE Reached Event,
then WQE and Data Segment leakage may occur. Therefore, it is good
programming practice to teardown a QP that is associated with an SRQ
by using the following process:
- Put the QP in the Error State;
- wait for the Affiliated Asynchronous Last WQE Reached Event;
- either:
- drain the CQ by invoking the Poll CQ verb and either wait for CQ
to be empty or the number of Poll CQ operations has exceeded
CQ capacity size; or
- post another WR that completes on the same CQ and wait for this
WR to return as a WC;
- and then invoke a Destroy QP or Reset QP."
Catch the Last WQE Reached Event in the core layer during drain QP flow.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20240619171153.34631-2-mgurtovoy@nvidia.com
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
drivers/infiniband/hw/mlx4/alias_GUID.c: In function ‘mlx4_ib_init_alias_guid_service’:
drivers/infiniband/hw/mlx4/alias_GUID.c:878:74: error: ‘%d’ directive
output may be truncated writing between 1 and 11 bytes into a region of
size 5 [-Werror=format-truncation=]
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~
drivers/infiniband/hw/mlx4/alias_GUID.c:878:63: note: directive argument in the range [-2147483641, 2147483646]
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/alias_GUID.c:878:17: note: ‘snprintf’ output
between 12 and 22 bytes into a destination of size 15
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: a0c64a17aba8 ("mlx4: Add alias_guid mechanism")
Link: https://lore.kernel.org/r/1951c9500109ca7e36dcd523f8a5f2d0d2a608d1.1718554641.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Increase size of the name array to avoid truncated output warning.
drivers/infiniband/hw/mlx4/mad.c: In function ‘mlx4_ib_alloc_demux_ctx’:
drivers/infiniband/hw/mlx4/mad.c:2197:47: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 4
[-Werror=format-truncation=]
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2197:38: note: directive argument in
the range [-2147483645, 2147483647]
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2197:9: note: ‘snprintf’ output between
10 and 20 bytes into a destination of size 12
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2205:48: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2205:38: note: directive argument in
the range [-2147483645, 2147483647]
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2205:9: note: ‘snprintf’ output between
11 and 21 bytes into a destination of size 12
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2213:48: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2213:38: note: directive argument in
the range [-2147483645, 2147483647]
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2213:9: note: ‘snprintf’ output between
11 and 21 bytes into a destination of size 12
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:244: drivers/infiniband/hw/mlx4/mad.o] Error 1
Fixes: fc06573dfaf8 ("IB/mlx4: Initialize SR-IOV IB support for slaves in master context")
Link: https://lore.kernel.org/r/f3798b3ce9a410257d7e1ec7c9e285f1352e256a.1718554569.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the table is released, we nullify pointer to GID table, it means
that in case GID entry leak is detected, we will leak table too.
Delete code that prevents table destruction.
Fixes: b150c3862d21 ("IB/core: Introduce GID entry reference counts")
Link: https://lore.kernel.org/r/a62560af06ba82c88ef9194982bfa63d14768ff9.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The req_transport_retries_exceeded counter shows the number of times
requester detected transport retries exceed error.
The req_rnr_retries_exceeded counter show the number of times the
requester detected RNR NAKs retries exceed error.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The req_transport_retries_exceeded counter shows the number of times
requester detected transport retries exceed error.
The req_rnr_retries_exceeded counter show the number of times the
requester detected RNR NAKs retries exceed error.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/250466af94f4989d638fab168e246035530e912f.1718301543.git.leon@kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Set the mkey for dmabuf at PAGE_SIZE to support any SGL
after a move operation.
ib_umem_find_best_pgsz returns 0 on error, so it is
incorrect to check the returned page_size against PAGE_SIZE
Fixes: 90da7dc8206a ("RDMA/mlx5: Support dma-buf based userspace memory region")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/1e2289b9133e89f273a4e68d459057d032cbc2ce.1718301631.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Previously, all IB dev resources are initialized on driver load. As
they are not always used, move the initialization to the time when
they are needed.
To be more specific, move PD (p0) and CQ (c0) initialization to the
time when the first SRQ is created. and move SRQs（s0 and s1)
initialization to the time first QP is created. To avoid concurrent
creations, two new mutexes are also added.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Link: https://lore.kernel.org/r/98c3e53a8cc0bdfeb6dec6e5bb8b037d78ab00d8.1717409369.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
UMR QP is not used in some cases, so move QP and its CQ creations from
driver load flow to the time first reg_mr occurs, that is when MR
interfaces are first called.
The initialization of dev->umrc.pd and dev->umrc.lock is still done in
driver load because pd is needed for mlx5_mkey_cache_init and the lock
is reused to protect against the concurrent creation.
When testing 4G bytes memory registration latency with rtool [1] and 8
threads in parallel, there is minor performance degradation (<5% for
the max latency) is seen for the first reg_mr with this change.
Link: https://github.com/paravmellanox/rtool [1]
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Link: https://lore.kernel.org/r/55d3c4f8a542fd974d8a4c5816eccfb318a59b38.1717409369.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
From: Leon Romanovsky <leonro@nvidia.com>
Internal mlx5_ib resources are created during mlx5_ib module load. This
behavior is not optimal because it consumes resources that are not
needed when SFs are created. This patch series delays the creation of
mlx5_ib internal resources to the stage when they actually used.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The test of write combining was added before in mlx5_ib driver. It
opens UD QP and posts NOP WQEs, and uses BlueFlame doorbell. When
BlueFlame is used, WQEs get written directly to a PCI BAR of the
device (in addition to memory) so that the device handles them without
having to access memory.
In this test, the WQEs written in memory are different from the ones
written to the BlueFlame which request CQE update. By checking the
completion reports posted on CQ, we can know if BlueFlame succeeds or
not. The write combining must be supported if BlueFlame succeeds as
its register is written using write combining.
This patch reimplements the test in the same way, but using a pair of
SQ and CQ only. It is moved to mlx5_core as a general feature used by
both mlx5_core and mlx5_ib.
Besides, save write combine test result of the PCI function, so that
its thousands of child functions such as SF can query without paying
the time and resource penalty by itself. The test function is called
only after failing to get the cached result. With this enhancement,
all thousands of SFs of the PF attached to same driver no longer need
to perform WC check explicitly, which is already done in the system.
This saves several commands per SF, thereby speeds up SF creation and
also saves completion EQ creation.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/4ff5a8cc4c5b5b0d98397baa45a5019bcdbf096e.1717409369.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Allow variable size indirection table allocation in MANA instead
of using a constant value MANA_INDIRECT_TABLE_SIZE.
The size is now derived from the MANA_QUERY_VPORT_CONFIG and the
indirection table is allocated dynamically.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/1718015319-9609-1-git-send-email-shradhagupta@linux.microsoft.com
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Process QP fatal events from the error event queue.
For that, find the QP, using QPN from the event, and then call its
event_handler. To find the QPs, store created RC QPs in an xarray.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1717754897-19858-1-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Wei Hu <weh@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
iw_conn_req_handler() associates a new struct rdma_id_private (conn_id) with
an existing struct iw_cm_id (cm_id) as follows:
conn_id->cm_id.iw = cm_id;
cm_id->context = conn_id;
cm_id->cm_handler = cma_iw_handler;
rdma_destroy_id() frees both the cm_id and the struct rdma_id_private. Make
sure that cm_work_handler() does not trigger a use-after-free by only
freeing of the struct rdma_id_private after all pending work has finished.
Cc: stable@vger.kernel.org
Fixes: 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref")
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240605145117.397751-6-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Instead of complicating the code to avoid a spin_lock_irqsave() /
spin_lock_irqrestore() pair before returning, simplify the code by removing
the local variable 'empty'.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240605145117.397751-5-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
queue_work() can test efficiently whether or not work is pending. Hence,
simplify cm_event_handler() by always calling queue_work() instead of only
if the list with pending work is empty.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240605145117.397751-4-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Since iwcm_deref_id() returns either 0 or 1, change its return type from
'int' into 'bool'.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240605145117.397751-3-bvanassche@acm.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Improve source code readability by using list_first_entry() where appropriate.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240605145117.397751-2-bvanassche@acm.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Fill in properties of the ib device.
Order the assignment in the order of fields in the struct ib_device_attr.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1717070117-1234-3-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Do not try to handle admin command completion if it has an unexpected
command id and print a relevant error message.
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Yehuda Yitschak <yehuday@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://lore.kernel.org/r/20240513064630.6247-1-mrgolin@amazon.com
Reviewed-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement user requests to create and destroy an RC QP.
As the user does not have an FMR queue, it is skipped and NO_FMR flag
is used.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1716366242-558-3-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement HW requests to create and destroy an RC QP.
An RC QP may have 5 queues.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1716366242-558-2-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
'num_vectors' is used to count the number of elements in the 'qv_info'
flexible array in "struct irdma_qvlist_info".
So annotate it with __counted_by() to make it explicit and enable some
additional checks.
This allocation is done in irdma_save_msix_info().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/2ca8b14adf79c4795d7aa95bbfc79253a6bfed82.1716102112.git.christophe.jaillet@wanadoo.fr
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In case any of PCI BARs is missing during device probe we would like to
fail as early as possible. Fail if any of the required BARs isn't listed
as a memory BAR.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://lore.kernel.org/r/20240513081019.26998-1-mrgolin@amazon.com
Reviewed-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
BNXT_RE_COMP_MASK_UCNTX_HW_RETX_ENABLED was introduced to share the HW
retransmit capability between driver and lib. The main difference in
implementation for HW Retransmit support is the usage of MSN table or
PSN table . When HW retrans is enabled, HW expects MSN table to be
allocated by driver/lib, else PSN table (for older adapters).
FW expose a new field which gives MSN capability. Drivers and libs can
depend on the new field instead of HW Retrasns capability. For
adapters which support HW_RETX feature, MSN table capability will be
set. For older adapters, this value will be 0(to maintain backward
compatibility with older FW).
Rename UAPI just to capture the correct name of the HW capability
that driver/library is interested in. No functional impact even if
older rdma-core is used.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1716876697-25970-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
FW reports the HW capability to use PSN table or MSN table and
driver/library need to select it based on this capability.
Use the new capability instead of the older capability check for HW
retransmission while handling the MSN/PSN table. FW report
zero (PSN table) for older adapters to maintain backward compatibility.
Also, Updated the FW interface structures to handle the new fields.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1716876697-25970-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in here
are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally.
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3+hQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylfTwCfUyHWkDZuZ7ehdtjzfmcd4EKZBK8An3AAV99G
ox8PXMxuFTaUEdT/69FQ
=2sEo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
-----BEGIN PGP SIGNATURE-----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=xjoS
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
Normal set of driver updates and small fixes:
- Small improvements and fixes for erdma, efa, hfi1, bnxt_re
- Fix a UAF crash after module unload on leaking restrack entry
- Continue adding full RDMA support in mana with support for EQs, GID's
and CQs
- Improvements to the mkey cache in mlx5
- DSCP traffic class support in hns and several bug fixes
- Cap the maximum number of MADs in the receive queue to avoid OOM
- Another batch of rxe bug fixes from large scale testing
- __iowrite64_copy() optimizations for write combining MMIO memory
- Remove NULL checks before dev_put/hold()
- EFA support for receive with immediate
- Fix a recent memleaking regression in a cma error path
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZkeo2gAKCRCFwuHvBreF
YbuNAQChzGmS4F0JAn5Wj0CDvkZghELqtvzEb92SzqcgdyQafAD/fC7f23LJ4OsO
1ZIaQEZu7j9DVg5PKFZ7WfdXjGTKqwA=
=QRXg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Aside from the usual things this has an arch update for
__iowrite64_copy() used by the RDMA drivers.
This API was intended to generate large 64 byte MemWr TLPs on PCI.
These days most processors had done this by just repeating writel() in
a loop. S390 and some new ARM64 designs require a special helper to
get this to generate.
- Small improvements and fixes for erdma, efa, hfi1, bnxt_re
- Fix a UAF crash after module unload on leaking restrack entry
- Continue adding full RDMA support in mana with support for EQs,
GID's and CQs
- Improvements to the mkey cache in mlx5
- DSCP traffic class support in hns and several bug fixes
- Cap the maximum number of MADs in the receive queue to avoid OOM
- Another batch of rxe bug fixes from large scale testing
- __iowrite64_copy() optimizations for write combining MMIO memory
- Remove NULL checks before dev_put/hold()
- EFA support for receive with immediate
- Fix a recent memleaking regression in a cma error path"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (70 commits)
RDMA/cma: Fix kmemleak in rdma_core observed during blktests nvme/rdma use siw
RDMA/IPoIB: Fix format truncation compilation errors
bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq
RDMA/efa: Support QP with unsolicited write w/ imm. receive
IB/hfi1: Remove generic .ndo_get_stats64
IB/hfi1: Do not use custom stat allocator
RDMA/hfi1: Use RMW accessors for changing LNKCTL2
RDMA/mana_ib: implement uapi for creation of rnic cq
RDMA/mana_ib: boundary check before installing cq callbacks
RDMA/mana_ib: introduce a helper to remove cq callbacks
RDMA/mana_ib: create and destroy RNIC cqs
RDMA/mana_ib: create EQs for RNIC CQs
RDMA/core: Remove NULL check before dev_{put, hold}
RDMA/ipoib: Remove NULL check before dev_{put, hold}
RDMA/mlx5: Remove NULL check before dev_{put, hold}
RDMA/mlx5: Track DCT, DCI and REG_UMR QPs as diver_detail resources.
RDMA/core: Add an option to display driver-specific QPs in the rdmatool
RDMA/efa: Add shutdown notifier
RDMA/mana_ib: Fix missing ret value
IB/mlx5: Use __iowrite64_copy() for write combining stores
...
Truncate the device name to store IPoIB VLAN name.
[leonro@5b4e8fba4ddd kernel]$ make -s -j 20 allmodconfig
[leonro@5b4e8fba4ddd kernel]$ make -s -j 20 W=1 drivers/infiniband/ulp/ipoib/
drivers/infiniband/ulp/ipoib/ipoib_vlan.c: In function ‘ipoib_vlan_add’:
drivers/infiniband/ulp/ipoib/ipoib_vlan.c:187:52: error: ‘%04x’
directive output may be truncated writing 4 bytes into a region of size
between 0 and 15 [-Werror=format-truncation=]
187 | snprintf(intf_name, sizeof(intf_name), "%s.%04x",
| ^~~~
drivers/infiniband/ulp/ipoib/ipoib_vlan.c:187:48: note: directive
argument in the range [0, 65535]
187 | snprintf(intf_name, sizeof(intf_name), "%s.%04x",
| ^~~~~~~~~
drivers/infiniband/ulp/ipoib/ipoib_vlan.c:187:9: note: ‘snprintf’ output
between 6 and 21 bytes into a destination of size 16
187 | snprintf(intf_name, sizeof(intf_name), "%s.%04x",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
188 | ppriv->dev->name, pkey);
| ~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:244: drivers/infiniband/ulp/ipoib/ipoib_vlan.o] Error 1
make[6]: *** Waiting for unfinished jobs....
Fixes: 9baa0b036410 ("IB/ipoib: Add rtnl_link_ops support")
Link: https://lore.kernel.org/r/e9d3e1fef69df4c9beaf402cc3ac342bad680791.1715240029.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfbad8 ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5fd7 ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZjwicQAKCRBZ7Krx/gZQ
67WgAP4iDssAVApazVvOUecQBtOd6xBvQUf1k3acMKa03hcdwAEAmM8qN0MpYUkz
MyVA6oRvC8selaWh62eXamWBgjc1Rwo=
=jLRy
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dentry leak fix from Al Viro:
"Dentry leak fix in the qibfs driver that I forgot to send a pull
request for ;-/
My apologies - it actually sat in vfs.git#fixes for more than two
months..."
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qibfs: fix dentry leak
Add a new EFA flags attribute for QP creation, and support unsolicited
write with immediate flag. QPs created with this flag set will not
consume receive work requests for incoming RDMA write with immediate.
Expose device capability bit for this feature support.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://lore.kernel.org/r/20240506151829.6475-1-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240503111333.552360-2-leitao@debian.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the hfi1 driver and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240503111333.552360-1-leitao@debian.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Convert open coded RMW accesses for LNKCTL2 to use
pcie_capability_clear_and_set_word() which makes its easier to
understand what the code tries to do.
In addition, this futureproofs the code. LNKCTL2 is not really owned by
any driver because it is a collection of control bits that PCI core
might need to touch. RMW accessors already have support for proper
locking for a selected set of registers to avoid losing concurrent
updates (LNKCTL2 is not yet among the registers that need protection
but likely will be in the future).
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240503133640.15899-1-ilpo.jarvinen@linux.intel.com
Reviewed-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Enable users to create RNIC CQs using a corresponding flag.
With the previous request size, an ethernet CQ is created.
As a response, return ID of the created CQ.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1714137160-5222-6-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add a boundary check inside mana_ib_install_cq_cb to prevent index overflow.
Fixes: 2a31c5a7e0d8 ("RDMA/mana_ib: Introduce mana_ib_install_cq_cb helper function")
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1714137160-5222-5-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Coccinelle reports a warning
WARNING: NULL check before dev_{put, hold} functions is not needed
The reason is the call netdev_{put, hold} of dev_{put,hold} will check NULL
There is no need to check before using dev_{put, hold}
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/ZjF1Eedxwhn4JSkz@octinomon.home
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Deduplicate sysfs ->show() callbacks which expose a string at a static
memory location. Use the newly introduced device_show_string() helper
in the driver core instead by declaring those sysfs attributes with
DEVICE_STRING_ATTR_RO().
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/185a88dd3e6e18bf508a875d87c95ea2a5c3fa13.1713608122.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
