Add a small amount of emulation to vfio_compat to accept the SET_IOMMU to
VFIO_NOIOMMU_IOMMU and have vfio just ignore iommufd if it is working on a
no-iommu enabled device.
Move the enable_unsafe_noiommu_mode module out of container.c into
vfio_main.c so that it is always available even if VFIO_CONTAINER=n.
This passes Alex's mini-test:
https://github.com/awilliam/tests/blob/master/vfio-noiommu-pci-device-open.c
Link: https://lore.kernel.org/r/0-v3-480cd64a16f7+1ad0-iommufd_noiommu_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This was detected by smatch as one "else if" statement could never be
reached. Confirmed bit order by comparing with python implementation [1].
drivers/iommu/apple-dart.c:991 apple_dart_t8110_irq()
warn: duplicate check 'error_code == ((((1))) << (3))'
(previous on line 989)
Link: https://github.com/AsahiLinux/m1n1/commit/96b2d584feec1e3f7bfa [1]
Fixes: d8bcc870d9 ("iommu: dart: Add t8110 DART support")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20230201124257.7801-1-ecurtin@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Register and enable an IOMMU perfmon for each active IOMMU device.
The failure of IOMMU perfmon registration doesn't impact other
functionalities of an IOMMU device.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-8-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
While enabled to count events and an event occurrence causes the counter
value to increment and roll over to or past zero, this is termed a
counter overflow. The overflow can trigger an interrupt. The IOMMU
perfmon needs to handle the case properly.
New HW IRQs are allocated for each IOMMU device for perfmon. The IRQ IDs
are after the SVM range.
In the overflow handler, the counter is not frozen. It's very unlikely
that the same counter overflows again during the period. But it's
possible that other counters overflow at the same time. Read the
overflow register at the end of the handler and check whether there are
more.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-7-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The perf subsystem assumes that all counters are by default per-CPU. So
the user space tool reads a counter from each CPU. However, the IOMMU
counters are system-wide and can be read from any CPU. Here we use a CPU
mask to restrict counting to one CPU to handle the issue. (with CPU
hotplug notifier to choose a different CPU if the chosen one is taken
off-line).
The CPU is exposed to /sys/bus/event_source/devices/dmar*/cpumask for
the user space perf tool.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-6-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the IOMMU performance monitor capability, which supports the
collection of information about key events occurring during operation of
the remapping hardware, to aid performance tuning and debug.
The IOMMU perfmon support is implemented as part of the IOMMU driver and
interfaces with the Linux perf subsystem.
The IOMMU PMU has the following unique features compared with the other
PMUs.
- Support counting. Not support sampling.
- Does not support per-thread counting. The scope is system-wide.
- Support per-counter capability register. The event constraints can be
enumerated.
- The available event and event group can also be enumerated.
- Extra Enhanced Commands are introduced to control the counters.
Add a new variable, struct iommu_pmu *pmu, to in the struct intel_iommu
to track the PMU related information.
Add iommu_pmu_register() and iommu_pmu_unregister() to register and
unregister a IOMMU PMU. The register function setup the IOMMU PMU ops
and invoke the standard perf_pmu_register() interface to register a PMU
in the perf subsystem. This patch only exposes the functions. The
following patch will enable them in the IOMMU driver.
The IOMMU PMUs can be found under /sys/bus/event_source/devices/dmar*
The available filters and event format can be found at the format folder
$ ls /sys/bus/event_source/devices/dmar1/format/
event event_group filter_ats filter_ats_en filter_page_table
filter_page_table_en
The supported events can be found at the events folder
$ ls /sys/bus/event_source/devices/dmar1/events/
ats_blocked fs_nonleaf_hit int_cache_hit_posted
iommu_mem_blocked iotlb_hit pasid_cache_lookup ss_nonleaf_hit
ctxt_cache_hit fs_nonleaf_lookup int_cache_lookup
iommu_mrds iotlb_lookup pg_req_posted ss_nonleaf_lookup
ctxt_cache_lookup int_cache_hit_nonposted iommu_clocks
iommu_requests pasid_cache_hit pw_occupancy
The command below illustrates filter usage with a simple example.
$ perf stat -e dmar1/iommu_requests,filter_ats_en=0x1,filter_ats=0x1/
-a sleep 1
Performance counter stats for 'system wide':
368,947 dmar1/iommu_requests,filter_ats_en=0x1,filter_ats=0x1/
1.002592074 seconds time elapsed
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-5-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Enhanced Command Register is to submit command and operand of
enhanced commands to DMA Remapping hardware. It can supports up to 256
enhanced commands.
There is a HW register to indicate the availability of all 256 enhanced
commands. Each bit stands for each command. But there isn't an existing
interface to read/write all 256 bits. Introduce the u64 ecmdcap[4] to
store the existence of each enhanced command. Read 4 times to get all of
them in map_iommu().
Add a helper to facilitate an enhanced command launch. Make sure hardware
complete the command. Also add a helper to facilitate the check of PMU
essentials. These helpers will be used later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-4-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The performance monitoring infrastructure, perfmon, is to support
collection of information about key events occurring during operation of
the remapping hardware, to aid performance tuning and debug. Each
remapping hardware unit has capability registers that indicate support
for performance monitoring features and enumerate the capabilities.
Add alloc_iommu_pmu() to retrieve IOMMU perfmon capability information
for each iommu unit. The information is stored in the iommu->pmu data
structure. Capability registers are read-only, so it's safe to prefetch
and store them in the pmu structure. This could avoid unnecessary VMEXIT
when this code is running in the virtualization environment.
Add free_iommu_pmu() to free the saved capability information when
freeing the iommu unit.
Add a kernel config option for the IOMMU perfmon feature. Unless a user
explicitly uses the perf tool to monitor the IOMMU perfmon event, there
isn't any impact for the existing IOMMU. Enable it by default.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-3-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A new field, which indicates the size of the remapping hardware register
set for this remapping unit, is introduced in the DMA-remapping hardware
unit definition (DRHD) structure with the VT-d Spec 4.0. With this
information, SW doesn't need to 'guess' the size of the register set
anymore.
Update the struct acpi_dmar_hardware_unit to reflect the field. Store the
size of the register set in struct dmar_drhd_unit for each dmar device.
The 'size' information is ResvZ for the old BIOS and platforms. Fall back
to the old guessing method. There is nothing changed.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-2-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Setup No Execute Enable bit (Bit 133) of a scalable mode PASID entry.
This is to allow the use of XD bit of the first level page table.
Fixes: ddf09b6d43 ("iommu/vt-d: Setup pasid entries for iova over first level")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230126095438.354205-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After commit be51b1d6bb ("iommu/sva: Refactoring
iommu_sva_bind/unbind_device()"), the iommu driver doesn't need to
return an iommu_sva pointer anymore. This removes the sva field
from intel_svm_dev and cleanups the code accordingly.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230109014955.147068-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It was used as a reference counter of an existing bond between device
and user application memory address. Commit be51b1d6bb ("iommu/sva:
Refactoring iommu_sva_bind/unbind_device()") has added this in iommu
core. Remove it to avoid duplicate code.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230109014955.147068-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There's no need to have a public header for Intel SVA implementation.
The device driver should interact with Intel SVA implementation via
the IOMMU generic APIs.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230109014955.147068-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The 'acpiid' buffer in the parse_ivrs_acpihid function may overflow,
because the string specifier in the format string sscanf()
has no width limitation.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: ca3bf5d47c ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/20230202082719.1513849-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
pci_device_group() can return an already existing IOMMU group if the PCI
device's pagetables have to be shared with another one due to bus
toplogy, isolation features and/or DMA alias quirks.
apple_dart_device_group() however assumes that the group has just been
created and overwrites its iommudata which will eventually lead to
apple_dart_release_group leaving stale entries in sid2group.
Fix that by merging the iommudata if the returned group already exists.
Fixes: f0b636804c ("iommu/dart: Clear sid2group entry when a group is freed")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Link: https://lore.kernel.org/r/20230128113532.94651-1-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
__GFP_ATOMIC serves little purpose. Its main effect is to set
ALLOC_HARDER which adds a few little boosts to increase the chance of an
allocation succeeding, one of which is to lower the water-mark at which it
will succeed.
It is *always* paired with __GFP_HIGH which sets ALLOC_HIGH which also
adjusts this watermark. It is probable that other users of __GFP_HIGH
should benefit from the other little bonuses that __GFP_ATOMIC gets.
__GFP_ATOMIC also gives a warning if used with __GFP_DIRECT_RECLAIM.
There is little point to this. We already get a might_sleep() warning if
__GFP_DIRECT_RECLAIM is set.
__GFP_ATOMIC allows the "watermark_boost" to be side-stepped. It is
probable that testing ALLOC_HARDER is a better fit here.
__GFP_ATOMIC is used by tegra-smmu.c to check if the allocation might
sleep. This should test __GFP_DIRECT_RECLAIM instead.
This patch:
- removes __GFP_ATOMIC
- allows __GFP_HIGH allocations to ignore watermark boosting as well
as GFP_ATOMIC requests.
- makes other adjustments as suggested by the above.
The net result is not change to GFP_ATOMIC allocations. Other
allocations that use __GFP_HIGH will benefit from a few different extra
privileges. This affects:
xen, dm, md, ntfs3
the vermillion frame buffer
hibernation
ksm
swap
all of which likely produce more benefit than cost if these selected
allocation are more likely to succeed quickly.
[mgorman: Minor adjustments to rework on top of a series]
Link: https://lkml.kernel.org/r/163712397076.13692.4727608274002939094@noble.neil.brown.name
Link: https://lkml.kernel.org/r/20230113111217.14134-7-mgorman@techsingularity.net
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jason Gunthorpe says:
====================
iommufd follows the same design as KVM and uses memory cgroups to limit
the amount of kernel memory a iommufd file descriptor can pin down. The
various internal data structures already use GFP_KERNEL_ACCOUNT to charge
its own memory.
However, one of the biggest consumers of kernel memory is the IOPTEs
stored under the iommu_domain and these allocations are not tracked.
This series is the first step in fixing it.
The iommu driver contract already includes a 'gfp' argument to the
map_pages op, allowing iommufd to specify GFP_KERNEL_ACCOUNT and then
having the driver allocate the IOPTE tables with that flag will capture a
significant amount of the allocations.
Update the iommu_map() API to pass in the GFP argument, and fix all call
sites. Replace iommu_map_atomic().
Audit the "enterprise" iommu drivers to make sure they do the right thing.
Intel and S390 ignore the GFP argument and always use GFP_ATOMIC. This is
problematic for iommufd anyhow, so fix it. AMD and ARM SMMUv2/3 are
already correct.
A follow up series will be needed to capture the allocations made when the
iommu_domain itself is allocated, which will complete the job.
====================
* 'iommu-memory-accounting' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/s390: Use GFP_KERNEL in sleepable contexts
iommu/s390: Push the gfp parameter to the kmem_cache_alloc()'s
iommu/intel: Use GFP_KERNEL in sleepable contexts
iommu/intel: Support the gfp argument to the map_pages op
iommu/intel: Add a gfp parameter to alloc_pgtable_page()
iommufd: Use GFP_KERNEL_ACCOUNT for iommu_map()
iommu/dma: Use the gfp parameter in __iommu_dma_alloc_noncontiguous()
iommu: Add a gfp parameter to iommu_map_sg()
iommu: Remove iommu_map_atomic()
iommu: Add a gfp parameter to iommu_map()
Link: https://lore.kernel.org/linux-iommu/0-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
SysMMU v7 has a bit different registers for getting the fault info:
- there is one single register (MMU_FAULT_VA) to get the fault address
- fault access type (R/W) can be read from MMU_FAULT_TRANS_INFO
register now
- interrupt status register has different bits w.r.t. previous SysMMU
versions
- VM and non-VM layouts have different register addresses
Add correct fault handling implementation for SysMMU v7, according to
all mentioned differences. Only VID #0 (default) is handled, as VM
domains support is not implemented yet.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20220726200739.30017-3-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fault info obtaining is implemented for SysMMU v1..v5 in a very hardware
specific way, as it relies on:
- interrupt bits being tied to read or write access
- having separate registers for the fault address w.r.t. AR/AW ops
Newer SysMMU versions (like SysMMU v7) have different way of providing
the fault info via registers:
- the transaction type (read or write) should be read from the
register (instead of hard-coding it w.r.t. corresponding interrupt
status bit)
- there is only one single register for storing the fault address
Because of that, it is not possible to add newer SysMMU support into
existing paradigm. Also it's not very effective performance-wise:
- checking SysMMU version in ISR each time is not necessary
- performing linear search to find the fault info by interrupt bit can
be replaced with a single lookup operation
Pave the way for adding support for new SysMMU versions by abstracting
the getting of fault info in ISR. While at it, do some related style
cleanups as well.
This is mostly a refactoring patch, but there are some minor functional
changes:
- fault message format is a bit different; now instead of AR/AW
prefixes for the fault's name, the request direction is printed as
[READ]/[WRITE]. It has to be done to prepare an abstraction for
SysMMU v7 support
- don't panic on unknown interrupts; print corresponding message and
continue
- if fault wasn't recovered, panic with some sane message instead of
just doing BUG_ON()
The whole fault message looks like this now:
[READ] PAGE FAULT occurred at 0x12341000
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220726200739.30017-2-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Merge patch-set from Jason:
"Let iommufd charge IOPTE allocations to the memory cgroup"
Description:
IOMMUFD follows the same design as KVM and uses memory cgroups to limit
the amount of kernel memory a iommufd file descriptor can pin down. The
various internal data structures already use GFP_KERNEL_ACCOUNT to charge
its own memory.
However, one of the biggest consumers of kernel memory is the IOPTEs
stored under the iommu_domain and these allocations are not tracked.
This series is the first step in fixing it.
The iommu driver contract already includes a 'gfp' argument to the
map_pages op, allowing iommufd to specify GFP_KERNEL_ACCOUNT and then
having the driver allocate the IOPTE tables with that flag will capture a
significant amount of the allocations.
Update the iommu_map() API to pass in the GFP argument, and fix all call
sites. Replace iommu_map_atomic().
Audit the "enterprise" iommu drivers to make sure they do the right thing.
Intel and S390 ignore the GFP argument and always use GFP_ATOMIC. This is
problematic for iommufd anyhow, so fix it. AMD and ARM SMMUv2/3 are
already correct.
A follow up series will be needed to capture the allocations made when the
iommu_domain itself is allocated, which will complete the job.
Link: https://lore.kernel.org/linux-iommu/0-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com/
These contexts are sleepable, so use the proper annotation. The GFP_ATOMIC
was added mechanically in the prior patches.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
dma_alloc_cpu_table() and dma_alloc_page_table() are eventually called by
iommufd through s390_iommu_map_pages() and it should not be forced to
atomic. Thread the gfp parameter through the call chain starting from
s390_iommu_map_pages().
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These contexts are sleepable, so use the proper annotation. The GFP_ATOMIC
was added mechanically in the prior patches.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Flow it down to alloc_pgtable_page() via pfn_to_dma_pte() and
__domain_mapping().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is eventually called by iommufd through intel_iommu_map_pages() and
it should not be forced to atomic. Push the GFP_ATOMIC to all callers.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommufd follows the same design as KVM and uses memory cgroups to limit
the amount of kernel memory a iommufd file descriptor can pin down. The
various internal data structures already use GFP_KERNEL_ACCOUNT.
However, one of the biggest consumers of kernel memory is the IOPTEs
stored under the iommu_domain. Many drivers will allocate these at
iommu_map() time and will trivially do the right thing if we pass in
GFP_KERNEL_ACCOUNT.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This function does an allocation of a buffer to return to the caller and
then goes on to allocate some internal memory, eg the scatterlist and
IOPTEs.
Instead of hard wiring GFP_KERNEL and a wrong GFP_ATOMIC, continue to use
the passed in gfp flags for all of the allocations. Clear the zone and
policy bits that are only relevant for the buffer allocation before
re-using them for internal allocations.
Auditing says this is never called from an atomic context, so the
GFP_ATOMIC is the incorrect flag.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Follow the pattern for iommu_map() and remove iommu_map_sg_atomic().
This allows __iommu_dma_alloc_noncontiguous() to use a GFP_KERNEL
allocation here, based on the provided gfp flags.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There is only one call site and it can now just pass the GFP_ATOMIC to the
normal iommu_map().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The internal mechanisms support this, but instead of exposting the gfp to
the caller it wrappers it into iommu_map() and iommu_map_atomic()
Fix this instead of adding more variants for GFP_KERNEL_ACCOUNT.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/1-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For device tree nodes, use the standard of_iommu_get_resv_regions()
implementation to obtain the reserved memory regions associated with a
device.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230120174251.4004100-5-thierry.reding@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is an implementation that IOMMU drivers can use to obtain reserved
memory regions from a device tree node. It uses the reserved-memory DT
bindings to find the regions associated with a given device. If these
regions are marked accordingly, identity mappings will be created for
them in the IOMMU domain that the devices will be attached to.
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230120174251.4004100-4-thierry.reding@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Qualcomm display driver installs a translation domain once it has
mapped a framebuffer. Use the identity domain for this device on
SC8280XP as well, to avoid faults from EFI FB accessing the framebuffer
while this is being set up.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230113041104.4189152-1-quic_bjorande@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Add the SM8150 DPU compatible to clients compatible list, as it also
needs the workarounds.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov<dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221212121054.193059-1-konrad.dybcio@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
struct iommu_ioas_copy, struct iommu_option and struct iommu_vfio_ioas are
missed in ucmd_buffer. Although they are smaller than the size of
ucmd_buffer, it is safer to list them in ucmd_buffer explicitly.
Fixes: aad37e71d5 ("iommufd: IOCTLs for the io_pagetable")
Fixes: d624d6652a ("iommufd: vfio container FD ioctl compatibility")
Link: https://lore.kernel.org/r/20230120122040.280219-1-yi.l.liu@intel.com
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If platform_driver_register() fails, it don't need unregister and call
kmem_cache_free() to free the memory allocated before calling register.
Fixes: bbc4d205d9 ("iommu/exynos: Fix driver initialization sequence")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230104095702.2591122-1-yangyingliang@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current code clears event log and ppr log entry after processing it due
to hardware errata ([1] erratum #732, #733). We do not have hardware
issue on SNP enabled system.
When SNP is enabled, the event logs, PPR log and completion wait buffer
are read-only to the host (see SNP FW ABI spec [2]). Clearing those entry
will result in a kernel #PF for an RMP violation. Hence do not clear
event and ppr log entry after processing it.
[1] http://developer.amd.com/wordpress/media/2012/10/48931_15h_Mod_10h-1Fh_Rev_Guide.pdf
[2] https://www.amd.com/system/files/TechDocs/56860.pdf
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230117044038.5728-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that we have the driver properly parameterized, we can add support
for T8110 DARTs. These DARTs drop the multiple TTBRs (which only make
sense with legacy 4K page platforms) and instead add support for new
features and more stream IDs. The register layout is different, but the
pagetable format is the same as T6000.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20230113105029.26654-8-marcan@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
T8110 has a new register layout. To accommodate this, first move all the
register offsets to the hw structure, and rename all the existing
registers to DART_T8020_*.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20230113105029.26654-7-marcan@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
They didn't have the PARAMS reg index in them, but they should.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20230113105029.26654-6-marcan@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
T8110 only has one TTBR per stream, so un-hardcode that.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20230113105029.26654-5-marcan@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
T8110 DARTs have up to 256 SIDs, so we need to switch to a bitmap to
handle them properly.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20230113105029.26654-4-marcan@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We need to save/restore the TCR/TTBR registers, since they are lost
on power gate.
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20230113105029.26654-3-marcan@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The struct initializer for set_platform_dma_ops uses a semicolon as
separator where a comma is required. Fix the compile error by using the
correct separator.
Fixes: c1fe9119ee ("iommu: Add set_platform_dma_ops callbacks")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230113191528.23638-1-joro@8bytes.org
The function is unused after commit 1b932ceddd ("iommu:
Remove detach_dev callbacks") and so compilation fails with
drivers/iommu/ipmmu-vmsa.c:305:13: error: ‘ipmmu_utlb_disable’ defined but not used [-Werror=unused-function]
305 | static void ipmmu_utlb_disable(struct ipmmu_vmsa_domain *domain,
| ^~~~~~~~~~~~~~~~~~
Remove the function to fix the compile error.
Fixes: 1b932ceddd ("iommu: Remove detach_dev callbacks")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230113185640.8050-1-joro@8bytes.org
In passthrough mode we do not use IOMMU page table. Hence we don't need
to allocate io_pgtable_ops.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230105091728.42469-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some io-pgtable implementations, and thus their users too, carry a
slightly odd dependency to get around the GENERIC_ATOMIC64 version of
cmpxchg64() often failing to compile. Since this is a functional
dependency, it's a bit misleading and untidy to tie it explicitly to
COMPILE_TEST while assuming that it's also implied by the other
platform/architecture options. Make things clearer by separating these
functional dependencies into distinct statements from those controlling
visibility, and since they do look a bit non-obvious to the uninitiated,
also commenting them for good measure.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/51d8c78e2ecc6696ac5907526580209ea6da167f.1673553587.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The detach_dev callback of domain ops is not called in the IOMMU core.
Remove this callback to avoid dead code. The trace event for detaching
domain from device is removed accordingly.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230110025408.667767-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
At the current moment, __iommu_detach_device() is only called via call
chains that are after the device driver is attached - eg via explicit
attach APIs called by the device driver.
Commit bd421264ed ("iommu: Fix deferred domain attachment") has removed
deferred domain attachment check from __iommu_attach_device() path, so it
should just unconditionally work in the __iommu_detach_device() path.
It actually looks like a bug that we were blocking detach on these paths
since the attach was unconditional and the caller is going to free the
(probably) UNAMANGED domain once this returns.
The only place we should be testing for deferred attach is during the
initial point the dma device is linked to the group, and then again
during the dma api calls.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230110025408.667767-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For those IOMMU drivers that don't provide default domain support, add an
implementation of set_platform_dma_ops callback so that the IOMMU core
could return the DMA control to platform DMA ops. At the same time, with
the set_platform_dma_ops implemented, there is no need for detach_dev.
Remove it to avoid dead code.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230110025408.667767-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When VFIO finishes assigning a device to user space and calls
iommu_group_release_dma_owner() to return the device to kernel, the IOMMU
core will attach the default domain to the device. Unfortunately, some
IOMMU drivers don't support default domain, hence in the end, the core
calls .detach_dev instead.
This adds set_platform_dma_ops iommu ops to make it clear that what it
does is returning control back to the platform DMA ops.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230110025408.667767-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu core calls the driver's detach_dev domain op callback only when
a device is finished assigning to user space and
iommu_group_release_dma_owner() is called to return the device to the
kernel, where iommu core wants to set the default domain to the device but
the driver didn't provide one.
In other words, if any iommu driver provides default domain support, the
.detach_dev callback will never be called. This removes the detach_dev
callbacks in those IOMMU drivers that support default domain.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev> # apple-dart
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> # sprd
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> # amd
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230110025408.667767-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A clk, prepared and enabled in mtk_iommu_v1_hw_init(), is not released in
the error handling path of mtk_iommu_v1_probe().
Add the corresponding clk_disable_unprepare(), as already done in the
remove function.
Fixes: b17336c55d ("iommu/mediatek: add support for mtk iommu generation one HW")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/593e7b7d97c6e064b29716b091a9d4fd122241fb.1671473163.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In __alloc_and_insert_iova_range, there is an issue that retry_pfn
overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when
iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will
overflow. As a result, if the retry logic is executed, low_pfn is
updated to 0, and then new_pfn < low_pfn returns false to make the
allocation successful.
This issue occurs in the following two situations:
1. The first iova size exceeds the domain size. When initializing
iova domain, iovad->cached_node is assigned as iovad->anchor. For
example, the iova domain size is 10M, start_pfn is 0x1_F000_0000,
and the iova size allocated for the first time is 11M. The
following is the log information, new->pfn_lo is smaller than
iovad->cached_node.
Example log as follows:
[ 223.798112][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
start_pfn:0x1f0000,retry_pfn:0x0,size:0xb00,limit_pfn:0x1f0a00
[ 223.799590][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
success start_pfn:0x1f0000,new->pfn_lo:0x1efe00,new->pfn_hi:0x1f08ff
2. The node with the largest iova->pfn_lo value in the iova domain
is deleted, iovad->cached_node will be updated to iovad->anchor,
and then the alloc iova size exceeds the maximum iova size that can
be allocated in the domain.
After judging that retry_pfn is less than limit_pfn, call retry_pfn+1
to fix the overflow issue.
Signed-off-by: jianjiao zeng <jianjiao.zeng@mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.15.*
Fixes: 4e89dce725 ("iommu/iova: Retry from last rb tree node if iova search fails")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230111063801.25107-1-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Similar to SMMUv2, this driver calls iommu_device_unregister() from the
shutdown path, which removes the IOMMU groups with no coordination
whatsoever with their users - shutdown methods are optional in device
drivers. This can lead to NULL pointer dereferences in those drivers'
DMA API calls, or worse.
Instead of calling the full arm_smmu_device_remove() from
arm_smmu_device_shutdown(), let's pick only the relevant function call -
arm_smmu_device_disable() - more or less the reverse of
arm_smmu_device_reset() - and call just that from the shutdown path.
Fixes: 57365a04c9 ("iommu: Move bus setup to IOMMU device registration")
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221215141251.3688780-2-vladimir.oltean@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
Michael Walle says he noticed the following stack trace while performing
a shutdown with "reboot -f". He suggests he got "lucky" and just hit the
correct spot for the reboot while there was a packet transmission in
flight.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 6.1.0-rc5-00088-gf3600ff8e322 #1930
Hardware name: Kontron KBox A-230-LS (DT)
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_map_page+0x9c/0x254
Call trace:
iommu_get_dma_domain+0x14/0x20
dma_map_page_attrs+0x1ec/0x250
enetc_start_xmit+0x14c/0x10b0
enetc_xmit+0x60/0xdc
dev_hard_start_xmit+0xb8/0x210
sch_direct_xmit+0x11c/0x420
__dev_queue_xmit+0x354/0xb20
ip6_finish_output2+0x280/0x5b0
__ip6_finish_output+0x15c/0x270
ip6_output+0x78/0x15c
NF_HOOK.constprop.0+0x50/0xd0
mld_sendpack+0x1bc/0x320
mld_ifc_work+0x1d8/0x4dc
process_one_work+0x1e8/0x460
worker_thread+0x178/0x534
kthread+0xe0/0xe4
ret_from_fork+0x10/0x20
Code: d503201f f9416800 d503233f d50323bf (f9404c00)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
This appears to be reproducible when the board has a fixed IP address,
is ping flooded from another host, and "reboot -f" is used.
The following is one more manifestation of the issue:
$ reboot -f
kvm: exiting hardware virtualization
cfg80211: failed to load regulatory.db
arm-smmu 5000000.iommu: disabling translation
sdhci-esdhc 2140000.mmc: Removing from iommu group 11
sdhci-esdhc 2150000.mmc: Removing from iommu group 12
fsl-edma 22c0000.dma-controller: Removing from iommu group 17
dwc3 3100000.usb: Removing from iommu group 9
dwc3 3110000.usb: Removing from iommu group 10
ahci-qoriq 3200000.sata: Removing from iommu group 2
fsl-qdma 8380000.dma-controller: Removing from iommu group 20
platform f080000.display: Removing from iommu group 0
etnaviv-gpu f0c0000.gpu: Removing from iommu group 1
etnaviv etnaviv: Removing from iommu group 1
caam_jr 8010000.jr: Removing from iommu group 13
caam_jr 8020000.jr: Removing from iommu group 14
caam_jr 8030000.jr: Removing from iommu group 15
caam_jr 8040000.jr: Removing from iommu group 16
fsl_enetc 0000:00:00.0: Removing from iommu group 4
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.1: Removing from iommu group 5
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.2: Removing from iommu group 6
fsl_enetc_mdio 0000:00:00.3: Removing from iommu group 8
mscc_felix 0000:00:00.5: Removing from iommu group 3
fsl_enetc 0000:00:00.6: Removing from iommu group 7
pcieport 0001:00:00.0: Removing from iommu group 18
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
pcieport 0002:00:00.0: Removing from iommu group 19
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_unmap_page+0x38/0xe0
Call trace:
iommu_get_dma_domain+0x14/0x20
dma_unmap_page_attrs+0x38/0x1d0
enetc_unmap_tx_buff.isra.0+0x6c/0x80
enetc_poll+0x170/0x910
__napi_poll+0x40/0x1e0
net_rx_action+0x164/0x37c
__do_softirq+0x128/0x368
run_ksoftirqd+0x68/0x90
smpboot_thread_fn+0x14c/0x190
Code: d503201f f9416800 d503233f d50323bf (f9405400)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
The problem seems to be that iommu_group_remove_device() is allowed to
run with no coordination whatsoever with the shutdown procedure of the
enetc PCI device. In fact, it almost seems as if it implies that the
pci_driver :: shutdown() method is mandatory if DMA is used with an
IOMMU, otherwise this is inevitable. That was never the case; shutdown
methods are optional in device drivers.
This is the call stack that leads to iommu_group_remove_device() during
reboot:
kernel_restart
-> device_shutdown
-> platform_shutdown
-> arm_smmu_device_shutdown
-> arm_smmu_device_remove
-> iommu_device_unregister
-> bus_for_each_dev
-> remove_iommu_group
-> iommu_release_device
-> iommu_group_remove_device
I don't know much about the arm_smmu driver, but
arm_smmu_device_shutdown() invoking arm_smmu_device_remove() looks
suspicious, since it causes the IOMMU device to unregister and that's
where everything starts to unravel. It forces all other devices which
depend on IOMMU groups to also point their ->shutdown() to ->remove(),
which will make reboot slower overall.
There are 2 moments relevant to this behavior. First was commit
b06c076ea9 ("Revert "iommu/arm-smmu: Make arm-smmu explicitly
non-modular"") when arm_smmu_device_shutdown() was made to run the exact
same thing as arm_smmu_device_remove(). Prior to that, there was no
iommu_device_unregister() call in arm_smmu_device_shutdown(). However,
that was benign until commit 57365a04c9 ("iommu: Move bus setup to
IOMMU device registration"), which made iommu_device_unregister() call
remove_iommu_group().
Restore the old shutdown behavior by making remove() call shutdown(),
but shutdown() does not call the remove() specific bits.
Fixes: 57365a04c9 ("iommu: Move bus setup to IOMMU device registration")
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221215141251.3688780-1-vladimir.oltean@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
Although it's vanishingly unlikely that anyone would integrate an SMMU
within a coherent interconnect without also making the pagetable walk
interface coherent, the same effect happens if a coherent SMMU fails to
advertise CTTW correctly. This turns out to be the case on some popular
NXP SoCs, where VFIO started failing the IOMMU_CAP_CACHE_COHERENCY test,
even though IOMMU_CACHE *was* previously achieving the desired effect
anyway thanks to the underlying integration.
While those SoCs stand to gain some more general benefits from a
firmware update to override CTTW correctly in DT/ACPI, it's also easy
to work around this in Linux as well, to avoid imposing too much on
affected users - since the upstream client devices *are* correctly
marked as coherent, we can trivially infer their coherent paths through
the SMMU as well.
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: df198b37e7 ("iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY better")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/d6dc41952961e5c7b21acac08a8bf1eb0f69e124.1671123115.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
No iommu driver implements this any more, get rid of it.
Link: https://lore.kernel.org/r/9-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
s390 doesn't use irq_domains, so it has no place to set
IRQ_DOMAIN_FLAG_ISOLATED_MSI. Instead of continuing to abuse the iommu
subsystem to convey this information add a simple define which s390 can
make statically true. The define will cause msi_device_has_isolated() to
return true.
Remove IOMMU_CAP_INTR_REMAP from the s390 iommu driver.
Link: https://lore.kernel.org/r/8-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
On x86 platforms when the HW can support interrupt remapping the iommu
driver creates an irq_domain for the IR hardware and creates a child MSI
irq_domain.
When the global irq_remapping_enabled is set, the IR MSI domain is
assigned to the PCI devices (by intel_irq_remap_add_device(), or
amd_iommu_set_pci_msi_domain()) making those devices have the isolated MSI
property.
Due to how interrupt domains work, setting IRQ_DOMAIN_FLAG_ISOLATED_MSI on
the parent IR domain will cause all struct devices attached to it to
return true from msi_device_has_isolated_msi(). This replaces the
IOMMU_CAP_INTR_REMAP flag as all places using IOMMU_CAP_INTR_REMAP also
call msi_device_has_isolated_msi()
Set the flag and delete the cap.
Link: https://lore.kernel.org/r/7-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Trivially use the new API.
Link: https://lore.kernel.org/r/4-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Compute the isolated_msi over all the devices in the IOMMU group because
iommufd and vfio both need to know that the entire group is isolated
before granting access to it.
Link: https://lore.kernel.org/r/2-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Including:
- Core code:
- map/unmap_pages() cleanup
- SVA and IOPF refactoring
- Clean up and document return codes from device/domain
attachment code
- AMD driver:
- Rework and extend parsing code for ivrs_ioapic, ivrs_hpet
and ivrs_acpihid command line options
- Some smaller cleanups
- Intel driver:
- Blocking domain support
- Cleanups
- S390 driver:
- Fixes and improvements for attach and aperture handling
- PAMU driver:
- Resource leak fix and cleanup
- Rockchip driver:
- Page table permission bit fix
- Mediatek driver:
- Improve safety from invalid dts input
- Smaller fixes and improvements
- Exynos driver:
- Fix driver initialization sequence
- Sun50i driver:
- Remove IOMMU_DOMAIN_IDENTITY as it has not been working
forever
- Various other fixes
-----BEGIN PGP SIGNATURE-----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=ZM/m
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core code:
- map/unmap_pages() cleanup
- SVA and IOPF refactoring
- Clean up and document return codes from device/domain attachment
AMD driver:
- Rework and extend parsing code for ivrs_ioapic, ivrs_hpet and
ivrs_acpihid command line options
- Some smaller cleanups
Intel driver:
- Blocking domain support
- Cleanups
S390 driver:
- Fixes and improvements for attach and aperture handling
PAMU driver:
- Resource leak fix and cleanup
Rockchip driver:
- Page table permission bit fix
Mediatek driver:
- Improve safety from invalid dts input
- Smaller fixes and improvements
Exynos driver:
- Fix driver initialization sequence
Sun50i driver:
- Remove IOMMU_DOMAIN_IDENTITY as it has not been working forever
- Various other fixes"
* tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (74 commits)
iommu/mediatek: Fix forever loop in error handling
iommu/mediatek: Fix crash on isr after kexec()
iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
iommu/amd: Fix typo in macro parameter name
iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data
iommu/mediatek: Improve safety for mediatek,smi property in larb nodes
iommu/mediatek: Validate number of phandles associated with "mediatek,larbs"
iommu/mediatek: Add error path for loop of mm_dts_parse
iommu/mediatek: Use component_match_add
iommu/mediatek: Add platform_device_put for recovering the device refcnt
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
iommu/vt-d: Use real field for indication of first level
iommu/vt-d: Remove unnecessary domain_context_mapped()
iommu/vt-d: Rename domain_add_dev_info()
iommu/vt-d: Rename iommu_disable_dev_iotlb()
iommu/vt-d: Add blocking domain support
iommu/vt-d: Add device_block_translation() helper
iommu/vt-d: Allocate pasid table in device probe path
iommu/amd: Check return value of mmu_notifier_register()
iommu/amd: Fix pci device refcount leak in ppr_notifier()
...
* Randomize the per-cpu entry areas
Cleanups:
* Have CR3_ADDR_MASK use PHYSICAL_PAGE_MASK instead of open
coding it
* Move to "native" set_memory_rox() helper
* Clean up pmd_get_atomic() and i386-PAE
* Remove some unused page table size macros
-----BEGIN PGP SIGNATURE-----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=wwVF
-----END PGP SIGNATURE-----
Merge tag 'x86_mm_for_6.2_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
"New Feature:
- Randomize the per-cpu entry areas
Cleanups:
- Have CR3_ADDR_MASK use PHYSICAL_PAGE_MASK instead of open coding it
- Move to "native" set_memory_rox() helper
- Clean up pmd_get_atomic() and i386-PAE
- Remove some unused page table size macros"
* tag 'x86_mm_for_6.2_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
x86/mm: Ensure forced page table splitting
x86/kasan: Populate shadow for shared chunk of the CPU entry area
x86/kasan: Add helpers to align shadow addresses up and down
x86/kasan: Rename local CPU_ENTRY_AREA variables to shorten names
x86/mm: Populate KASAN shadow for entire per-CPU range of CPU entry area
x86/mm: Recompute physical address for every page of per-CPU CEA mapping
x86/mm: Rename __change_page_attr_set_clr(.checkalias)
x86/mm: Inhibit _PAGE_NX changes from cpa_process_alias()
x86/mm: Untangle __change_page_attr_set_clr(.checkalias)
x86/mm: Add a few comments
x86/mm: Fix CR3_ADDR_MASK
x86/mm: Remove P*D_PAGE_MASK and P*D_PAGE_SIZE macros
mm: Convert __HAVE_ARCH_P..P_GET to the new style
mm: Remove pointless barrier() after pmdp_get_lockless()
x86/mm/pae: Get rid of set_64bit()
x86_64: Remove pointless set_64bit() usage
x86/mm/pae: Be consistent with pXXp_get_and_clear()
x86/mm/pae: Use WRITE_ONCE()
x86/mm/pae: Don't (ab)use atomic64
mm/gup: Fix the lockless PMD access
...
The use of set_64bit() in X86_64 only code is pretty pointless, seeing
how it's a direct assignment. Remove all this nonsense.
[nathanchance: unbreak irte]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221022114425.168036718%40infradead.org
iommufd is the user API to control the IOMMU subsystem as it relates to
managing IO page tables that point at user space memory.
It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
container) which is the VFIO specific interface for a similar idea.
We see a broad need for extended features, some being highly IOMMU device
specific:
- Binding iommu_domain's to PASID/SSID
- Userspace IO page tables, for ARM, x86 and S390
- Kernel bypassed invalidation of user page tables
- Re-use of the KVM page table in the IOMMU
- Dirty page tracking in the IOMMU
- Runtime Increase/Decrease of IOPTE size
- PRI support with faults resolved in userspace
Many of these HW features exist to support VM use cases - for instance the
combination of PASID, PRI and Userspace IO Page Tables allows an
implementation of DMA Shared Virtual Addressing (vSVA) within a
guest. Dirty tracking enables VM live migration with SRIOV devices and
PASID support allow creating "scalable IOV" devices, among other things.
As these features are fundamental to a VM platform they need to be
uniformly exposed to all the driver families that do DMA into VMs, which
is currently VFIO and VDPA.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY5ct7wAKCRCFwuHvBreF
YZZ5AQDciXfcgXLt0UBEmWupNb0f/asT6tk717pdsKm8kAZMNAEAsIyLiKT5HqGl
s7fAu+CQ1pr9+9NKGevD+frw8Solsw4=
=jJkd
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd implementation from Jason Gunthorpe:
"iommufd is the user API to control the IOMMU subsystem as it relates
to managing IO page tables that point at user space memory.
It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
container) which is the VFIO specific interface for a similar idea.
We see a broad need for extended features, some being highly IOMMU
device specific:
- Binding iommu_domain's to PASID/SSID
- Userspace IO page tables, for ARM, x86 and S390
- Kernel bypassed invalidation of user page tables
- Re-use of the KVM page table in the IOMMU
- Dirty page tracking in the IOMMU
- Runtime Increase/Decrease of IOPTE size
- PRI support with faults resolved in userspace
Many of these HW features exist to support VM use cases - for instance
the combination of PASID, PRI and Userspace IO Page Tables allows an
implementation of DMA Shared Virtual Addressing (vSVA) within a guest.
Dirty tracking enables VM live migration with SRIOV devices and PASID
support allow creating "scalable IOV" devices, among other things.
As these features are fundamental to a VM platform they need to be
uniformly exposed to all the driver families that do DMA into VMs,
which is currently VFIO and VDPA"
For more background, see the extended explanations in Jason's pull request:
https://lore.kernel.org/lkml/Y5dzTU8dlmXTbzoJ@nvidia.com/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (62 commits)
iommufd: Change the order of MSI setup
iommufd: Improve a few unclear bits of code
iommufd: Fix comment typos
vfio: Move vfio group specific code into group.c
vfio: Refactor dma APIs for emulated devices
vfio: Wrap vfio group module init/clean code into helpers
vfio: Refactor vfio_device open and close
vfio: Make vfio_device_open() truly device specific
vfio: Swap order of vfio_device_container_register() and open_device()
vfio: Set device->group in helper function
vfio: Create wrappers for group register/unregister
vfio: Move the sanity check of the group to vfio_create_group()
vfio: Simplify vfio_create_group()
iommufd: Allow iommufd to supply /dev/vfio/vfio
vfio: Make vfio_container optionally compiled
vfio: Move container related MODULE_ALIAS statements into container.c
vfio-iommufd: Support iommufd for emulated VFIO devices
vfio-iommufd: Support iommufd for physical VFIO devices
vfio-iommufd: Allow iommufd to be used in place of a container fd
vfio: Use IOMMU_CAP_ENFORCE_CACHE_COHERENCY for vfio_file_enforced_coherent()
...
- Core:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for PCI/MSI[-X]
and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows device
manufactures to provide implementation defined storage for MSI messages
contrary to the uniform and specification defined storage mechanisms for
PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations
of the MSI-X table, but also gives the device manufacturer the freedom to
store the message in arbitrary places, even in host memory which is shared
with the device.
There have been several attempts to glue this into the current MSI code,
but after lengthy discussions it turned out that there is a fundamental
design problem in the current PCI/MSI-X implementation. This needs some
historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management was
completely different from what we have today in the actively developed
architectures. Interrupt management was completely architecture specific
and while there were attempts to create common infrastructure the
commonalities were rudimentary and just providing shared data structures and
interfaces so that drivers could be written in an architecture agnostic
way.
The initial PCI/MSI[-X] support obviously plugged into this model which
resulted in some basic shared infrastructure in the PCI core code for
setting up MSI descriptors, which are a pure software construct for holding
data relevant for a particular MSI interrupt, but the actual association to
Linux interrupts was completely architecture specific. This model is still
supported today to keep museum architectures and notorious stranglers
alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel,
which was creating yet another architecture specific mechanism and resulted
in an unholy mess on top of the existing horrors of x86 interrupt handling.
The x86 interrupt management code was already an incomprehensible maze of
indirections between the CPU vector management, interrupt remapping and the
actual IO/APIC and PCI/MSI[-X] implementation.
At roughly the same time ARM struggled with the ever growing SoC specific
extensions which were glued on top of the architected GIC interrupt
controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86 vector
domain and interrupt remapping and also allowed ARM to handle the zoo of
SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that it is
not available the PCI/MSI[-X] domains have the vector domain as their
parent. This reduced the required interaction between the domains pretty
much to the initialization phase where it is obviously required to
establish the proper parent relation ship in the components of the
hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware
it's clear that the actual PCI/MSI[-X] interrupt controller is not a global
entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the easy
solution of providing "global" PCI/MSI domains which was possible because
the PCI/MSI[-X] handling is uniform across the devices. This also allowed
to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in
turn made it simple to keep the existing architecture specific management
alive.
A similar problem was created in the ARM world with support for IP block
specific message storage. Instead of going all the way to stack a IP block
specific domain on top of the generic MSI domain this ended in a construct
which provides a "global" platform MSI domain which allows overriding the
irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the MSI
infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into the
existing infrastructure. Some of this just works by chance on particular
platforms but will fail in hard to diagnose ways when the driver is used
on platforms where the underlying MSI interrupt management code does not
expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront to
avoid resource exhaustion. They are expanded at run-time when the guest
actually tries to use them. The way how this is implemented is that the
host disables MSI-X and then re-enables it with a larger number of
vectors again. That works by chance because most device drivers set up
all interrupts before the device actually will utilize them. But that's
not universally true because some drivers allocate a large enough number
of vectors but do not utilize them until it's actually required,
e.g. for acceleration support. But at that point other interrupts of the
device might be in active use and the MSI-X disable/enable dance can
just result in losing interrupts and therefore hard to diagnose subtle
problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS
is not longer providing a uniform storage and configuration model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for PCI/IMS.
PCI/IMS has been verified with the work in progress IDXD driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
- Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place
-----BEGIN PGP SIGNATURE-----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=9erA
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt core and driver subsystem:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for
PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows
device manufactures to provide implementation defined storage for MSI
messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
message store which is uniform accross all devices). The PCI/MSI[-X]
uniformity allowed us to get away with "global" PCI/MSI domains.
IMS not only allows to overcome the size limitations of the MSI-X
table, but also gives the device manufacturer the freedom to store the
message in arbitrary places, even in host memory which is shared with
the device.
There have been several attempts to glue this into the current MSI
code, but after lengthy discussions it turned out that there is a
fundamental design problem in the current PCI/MSI-X implementation.
This needs some historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management
was completely different from what we have today in the actively
developed architectures. Interrupt management was completely
architecture specific and while there were attempts to create common
infrastructure the commonalities were rudimentary and just providing
shared data structures and interfaces so that drivers could be written
in an architecture agnostic way.
The initial PCI/MSI[-X] support obviously plugged into this model
which resulted in some basic shared infrastructure in the PCI core
code for setting up MSI descriptors, which are a pure software
construct for holding data relevant for a particular MSI interrupt,
but the actual association to Linux interrupts was completely
architecture specific. This model is still supported today to keep
museum architectures and notorious stragglers alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
kernel, which was creating yet another architecture specific mechanism
and resulted in an unholy mess on top of the existing horrors of x86
interrupt handling. The x86 interrupt management code was already an
incomprehensible maze of indirections between the CPU vector
management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
implementation.
At roughly the same time ARM struggled with the ever growing SoC
specific extensions which were glued on top of the architected GIC
interrupt controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86
vector domain and interrupt remapping and also allowed ARM to handle
the zoo of SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that
it is not available the PCI/MSI[-X] domains have the vector domain as
their parent. This reduced the required interaction between the
domains pretty much to the initialization phase where it is obviously
required to establish the proper parent relation ship in the
components of the hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
hardware it's clear that the actual PCI/MSI[-X] interrupt controller
is not a global entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the
easy solution of providing "global" PCI/MSI domains which was possible
because the PCI/MSI[-X] handling is uniform across the devices. This
also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
unchanged which in turn made it simple to keep the existing
architecture specific management alive.
A similar problem was created in the ARM world with support for IP
block specific message storage. Instead of going all the way to stack
a IP block specific domain on top of the generic MSI domain this ended
in a construct which provides a "global" platform MSI domain which
allows overriding the irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the
MSI infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into
the existing infrastructure. Some of this just works by chance on
particular platforms but will fail in hard to diagnose ways when the
driver is used on platforms where the underlying MSI interrupt
management code does not expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront
to avoid resource exhaustion. They are expanded at run-time when the
guest actually tries to use them. The way how this is implemented is
that the host disables MSI-X and then re-enables it with a larger
number of vectors again. That works by chance because most device
drivers set up all interrupts before the device actually will utilize
them. But that's not universally true because some drivers allocate a
large enough number of vectors but do not utilize them until it's
actually required, e.g. for acceleration support. But at that point
other interrupts of the device might be in active use and the MSI-X
disable/enable dance can just result in losing interrupts and
therefore hard to diagnose subtle problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
that IMS is not longer providing a uniform storage and configuration
model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per
device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for
PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place"
* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
irqchip/ti-sci-inta: Fix kernel doc
irqchip/gic-v2m: Mark a few functions __init
irqchip/gic-v2m: Include arm-gic-common.h
irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
iommu/amd: Enable PCI/IMS
iommu/vt-d: Enable PCI/IMS
x86/apic/msi: Enable PCI/IMS
PCI/MSI: Provide pci_ims_alloc/free_irq()
PCI/MSI: Provide IMS (Interrupt Message Store) support
genirq/msi: Provide constants for PCI/IMS support
x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
PCI/MSI: Provide prepare_desc() MSI domain op
PCI/MSI: Split MSI-X descriptor setup
genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
genirq/msi: Provide msi_domain_alloc_irq_at()
genirq/msi: Provide msi_domain_ops:: Prepare_desc()
genirq/msi: Provide msi_desc:: Msi_data
genirq/msi: Provide struct msi_map
x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmORzR4THHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXkqCCACFwHz04iepLE7R8ZZ6BVUhD6uzfzDo
s1j7ozOUGUe3vI6q0DElHWVQZgzIzLypVsfWkZToe6jeOU6R48b0tZSFyJCUNwGM
ogmS7N8fBdHfY9SBFoUPoziBifXpf3kq4hhX/w+1Lge9CN5Ywc4KjuJb91EAInbs
lm47O4KQY8w8A7BbPBHYBueUVWLvgwPRPOS032zqxN1787m2tCxpqkfnImK39kh6
IsBBIZfYsok0H5wldhZXnsARpEOeFF6BoFBXpFPlmnbv2VcK2AfZgTYdA3ESyEgd
NyOFDfh6BO07gTR1xCH6gvOpkHwx6xKAkjE36RymdhXS6fhRCRsfahVB
=m78g
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Drop unregister syscore from hyperv_cleanup to avoid hang (Gaurav
Kohli)
- Clean up panic path for Hyper-V framebuffer (Guilherme G. Piccoli)
- Allow IRQ remapping to work without x2apic (Nuno Das Neves)
- Fix comments (Olaf Hering)
- Expand hv_vp_assist_page definition (Saurabh Sengar)
- Improvement to page reporting (Shradha Gupta)
- Make sure TSC clocksource works when Linux runs as the root partition
(Stanislav Kinsburskiy)
* tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
iommu/hyper-v: Allow hyperv irq remapping without x2apic
clocksource: hyper-v: Add TSC page support for root partition
clocksource: hyper-v: Use TSC PFN getter to map vvar page
clocksource: hyper-v: Introduce TSC PFN getter
clocksource: hyper-v: Introduce a pointer to TSC page
x86/hyperv: Expand definition of struct hv_vp_assist_page
PCI: hv: update comment in x86 specific hv_arch_irq_unmask
hv: fix comment typo in vmbus_channel/low_latency
drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers
video: hyperv_fb: Avoid taking busy spinlock on panic path
hv_balloon: Add support for configurable order free page reporting
mm/page_reporting: Add checks for page_reporting_order param
There is a typo so this loop does i++ where i-- was intended. It will
result in looping until the kernel crashes.
Fixes: 2659392856 ("iommu/mediatek: Add error path for loop of mm_dts_parse")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/Y5C3mTam2nkbaz6o@kili
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Eric points out this is wrong for the rare case of someone using
allow_unsafe_interrupts on ARM. We always have to setup the MSI window in
the domain if the iommu driver asks for it.
Move the iommu_get_msi_cookie() setup to the top of the function and
always do it, regardless of the security mode. Add checks to
iommufd_device_setup_msi() to ensure the driver is not doing something
incomprehensible. No current driver will set both a HW and SW MSI window,
or have more than one SW MSI window.
Fixes: e8d5721003 ("iommufd: Add kAPI toward external drivers for physical devices")
Link: https://lore.kernel.org/r/3-v1-0362a1a1c034+98-iommufd_fixes1_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Correct a few items noticed late in review:
- We should assert that the math in batch_clear_carry() doesn't underflow
- user->locked should be -1 not 0 sicne we just did mmput
- npages should not have been recalculated, it already has that value
No functional change.
Fixes: 8d160cd4d5 ("iommufd: Algorithms for PFN storage")
Link: https://lore.kernel.org/r/2-v1-0362a1a1c034+98-iommufd_fixes1_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Repair some typos in comments that were noticed late in the review
cycle.
Fixes: f394576eb1 ("iommufd: PFN handling for iopt_pages")
Link: https://lore.kernel.org/r/1-v1-0362a1a1c034+98-iommufd_fixes1_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
PCI/IMS works like PCI/MSI-X in the remapping. Just add the feature flag,
but only when on real hardware.
Virtualized IOMMUs need additional support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232327.140571546@linutronix.de
PCI/IMS works like PCI/MSI-X in the remapping. Just add the feature flag,
but only when on real hardware.
Virtualized IOMMUs need additional support, e.g. for PASID.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232327.081482253@linutronix.de
Remove the global PCI/MSI irqdomain implementation and provide the required
MSI parent ops so the PCI/MSI code can detect the new parent and setup per
device domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.209212272@linutronix.de
Remove the global PCI/MSI irqdomain implementation and provide the required
MSI parent ops so the PCI/MSI code can detect the new parent and setup per
device domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.151226317@linutronix.de
Enable MSI parent domain support in the x86 vector domain and fixup the
checks in the iommu implementations to check whether device::msi::domain is
the default MSI parent domain. That keeps the existing logic to protect
e.g. devices behind VMD working.
The interrupt remap PCI/MSI code still works because the underlying vector
domain still provides the same functionality.
None of the other x86 PCI/MSI, e.g. XEN and HyperV, implementations are
affected either. They still work the same way both at the low level and the
PCI/MSI implementations they provide.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.034672592@linutronix.de
Impacted QAT device IDs that need extra dtlb flush quirk is ranging
from 0x4940 to 0x4943. After bitwise AND device ID with 0xfffc the
result should be 0x4940 instead of 0x494c to identify these devices.
Fixes: e65a6897be ("iommu/vt-d: Add a fix for devices need extra dtlb flush")
Reported-by: Raghunathan Srinivasan <raghunathan.srinivasan@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20221203005610.2927487-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If the system is rebooted via isr(), the IRQ handler might
be triggered before the domain is initialized. Resulting on
an invalid memory access error.
Fix:
[ 0.500930] Unable to handle kernel read from unreadable memory at virtual address 0000000000000070
[ 0.501166] Call trace:
[ 0.501174] report_iommu_fault+0x28/0xfc
[ 0.501180] mtk_iommu_isr+0x10c/0x1c0
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20221125-mtk-iommu-v2-0-e168dff7d43e@chromium.org
[ joro: Fixed spelling in commit message ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This driver treats IOMMU_DOMAIN_IDENTITY the same as UNMANAGED, which
cannot possibly be correct.
UNMANAGED domains are required to start out blocking all DMAs. This seems
to be what this driver does as it allocates a first level 'dt' for the IO
page table that is 0 filled.
Thus UNMANAGED looks like a working IO page table, and so IDENTITY must be
a mistake. Remove it.
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0-v1-97f0adf27b5e+1f0-s50_identity_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Just remove a unused variable that only is for mtk_iommu_v1.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-7-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No functional change. Just improve safety from dts.
All the larbs that connect to one IOMMU must connect with the same
smi-common. This patch checks all the mediatek,smi property for each
larb, If their mediatek,smi are different, it will return fails.
Also avoid there is no available smi-larb nodes.
Suggested-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-6-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix the smatch warnings:
drivers/iommu/mtk_iommu.c:878 mtk_iommu_mm_dts_parse() error: uninitialized
symbol 'larbnode'.
If someone abuse the dtsi node(Don't follow the definition of dt-binding),
for example "mediatek,larbs" is provided as boolean property, "larb_nr"
will be zero and cause abnormal.
To fix this problem and improve the code safety, add some checking
for the invalid input from dtsi, e.g. checking the larb_nr/larbid valid
range, and avoid "mediatek,larb-id" property conflicts in the smi-larb
nodes.
Fixes: d2e9a1102c ("iommu/mediatek: Contain MM IOMMU flow with the MM TYPE")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-5-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The mtk_iommu_mm_dts_parse will parse the smi larbs nodes. if the i+1
larb is parsed fail, we should put_device for the i..0 larbs.
There are two places need to comment:
1) The larbid may be not linear mapping, we should loop whole
the array in the error path.
2) I move this line position: "data->larb_imu[id].dev = &plarbdev->dev;"
before "if (!plarbdev->dev.driver)", That means set
data->larb_imu[id].dev before the error path. then we don't need
"platform_device_put(plarbdev)" again in probe_defer case. All depend
on "put_device" of the error path in error cases.
Fixes: d2e9a1102c ("iommu/mediatek: Contain MM IOMMU flow with the MM TYPE")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-4-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In order to simplify the error patch(avoid call of_node_put), Use
component_match_add instead component_match_add_release since we are only
interested in the "device" here. Then we could always call of_node_put in
normal path.
Strictly this is not a fixes patch, but it is a prepare for adding the
error path, thus I add a Fixes tag too.
Fixes: d2e9a1102c ("iommu/mediatek: Contain MM IOMMU flow with the MM TYPE")
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-3-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add platform_device_put to match with of_find_device_by_node.
Meanwhile, I add a new variable "pcommdev" which is for smi common device.
Otherwise, "platform_device_put(plarbdev)" for smi-common dev may be not
readable. And add a checking for whether pcommdev is NULL.
Fixes: d2e9a1102c ("iommu/mediatek: Contain MM IOMMU flow with the MM TYPE")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-2-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Resolve conflicts in drivers/vfio/vfio_main.c by using the iommfd version.
The rc fix was done a different way when iommufd patches reworked this
code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If the VFIO container is compiled out, give a kconfig option for iommufd
to provide the miscdev node with the same name and permissions as vfio
uses.
The compatibility node supports the same ioctls as VFIO and automatically
enables the VFIO compatible pinned page accounting mode.
Link: https://lore.kernel.org/r/10-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() for the error path to avoid reference count leak.
Fixes: 2e45528930 ("iommu/vt-d: Unify the way to process DMAR device scope array")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221121113649.190393-3-wangxiongfeng2@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() before 'return true' to avoid reference count leak.
Fixes: 89a6079df7 ("iommu/vt-d: Force IOMMU on for platform opt in hint")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221121113649.190393-2-wangxiongfeng2@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device
with refcount increment, when finish using it, the caller must decrease
the reference count by calling pci_dev_put(). So call pci_dev_put() after
using the 'pdev' to avoid refcount leak.
Besides, if the 'pdev' is null or intel_svm_prq_report() returns error,
there is no need to trace this fault.
Fixes: 06f4b8d09d ("iommu/vt-d: Remove unnecessary SVA data accesses in page fault path")
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221119144028.2452731-1-yangyingliang@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
QAT devices on Intel Sapphire Rapids and Emerald Rapids have a defect in
address translation service (ATS). These devices may inadvertently issue
ATS invalidation completion before posted writes initiated with
translated address that utilized translations matching the invalidation
address range, violating the invalidation completion ordering.
This patch adds an extra device TLB invalidation for the affected devices,
it is needed to ensure no more posted writes with translated address
following the invalidation completion. Therefore, the ordering is
preserved and data-corruption is prevented.
Device TLBs are invalidated under the following six conditions:
1. Device driver does DMA API unmap IOVA
2. Device driver unbind a PASID from a process, sva_unbind_device()
3. PASID is torn down, after PASID cache is flushed. e.g. process
exit_mmap() due to crash
4. Under SVA usage, called by mmu_notifier.invalidate_range() where
VM has to free pages that were unmapped
5. userspace driver unmaps a DMA buffer
6. Cache invalidation in vSVA usage (upcoming)
For #1 and #2, device drivers are responsible for stopping DMA traffic
before unmap/unbind. For #3, iommu driver gets mmu_notifier to
invalidate TLB the same way as normal user unmap which will do an extra
invalidation. The dTLB invalidation after PASID cache flush does not
need an extra invalidation.
Therefore, we only need to deal with #4 and #5 in this patch. #1 is also
covered by this patch due to common code path with #5.
Tested-by: Yuzhang Luo <yuzhang.luo@intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20221130062449.1360063-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These are on performance paths so we protect them using the
CONFIG_IOMMUFD_TEST to not take a hit during normal operation.
These are useful when running the test suite and syzkaller to find data
structure inconsistencies early.
Link: https://lore.kernel.org/r/18-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> # s390
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Provide a mock kernel module for the iommu_domain that allows it to run
without any HW and the mocking provides a way to directly validate that
the PFNs loaded into the iommu_domain are correct. This exposes the access
kAPI toward userspace to allow userspace to explore the functionality of
pages.c and io_pagetable.c
The mock also simulates the rare case of PAGE_SIZE > iommu page size as
the mock will operate at a 2K iommu page size. This allows exercising all
of the calculations to support this mismatch.
This is also intended to support syzkaller exploring the same space.
However, it is an unusually invasive config option to enable all of
this. The config option should not be enabled in a production kernel.
Link: https://lore.kernel.org/r/16-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> # s390
Tested-by: Eric Auger <eric.auger@redhat.com> # aarch64
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommufd can directly implement the /dev/vfio/vfio container IOCTLs by
mapping them into io_pagetable operations.
A userspace application can test against iommufd and confirm compatibility
then simply make a small change to open /dev/iommu instead of
/dev/vfio/vfio.
For testing purposes /dev/vfio/vfio can be symlinked to /dev/iommu and
then all applications will use the compatibility path with no code
changes. A later series allows /dev/vfio/vfio to be directly provided by
iommufd, which allows the rlimit mode to work the same as well.
This series just provides the iommufd side of compatibility. Actually
linking this to VFIO_SET_CONTAINER is a followup series, with a link in
the cover letter.
Internally the compatibility API uses a normal IOAS object that, like
vfio, is automatically allocated when the first device is
attached.
Userspace can also query or set this IOAS object directly using the
IOMMU_VFIO_IOAS ioctl. This allows mixing and matching new iommufd only
features while still using the VFIO style map/unmap ioctls.
While this is enough to operate qemu, it has a few differences:
- Resource limits rely on memory cgroups to bound what userspace can do
instead of the module parameter dma_entry_limit.
- VFIO P2P is not implemented. The DMABUF patches for vfio are a start at
a solution where iommufd would import a special DMABUF. This is to avoid
further propogating the follow_pfn() security problem.
- A full audit for pedantic compatibility details (eg errnos, etc) has
not yet been done
- powerpc SPAPR is left out, as it is not connected to the iommu_domain
framework. It seems interest in SPAPR is minimal as it is currently
non-working in v6.1-rc1. They will have to convert to the iommu
subsystem framework to enjoy iommfd.
The following are not going to be implemented and we expect to remove them
from VFIO type1:
- SW access 'dirty tracking'. As discussed in the cover letter this will
be done in VFIO.
- VFIO_TYPE1_NESTING_IOMMU
https://lore.kernel.org/all/0-v1-0093c9b0e345+19-vfio_no_nesting_jgg@nvidia.com/
- VFIO_DMA_MAP_FLAG_VADDR
https://lore.kernel.org/all/Yz777bJZjTyLrHEQ@nvidia.com/
Link: https://lore.kernel.org/r/15-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Kernel access is the mode that VFIO "mdevs" use. In this case there is no
struct device and no IOMMU connection. iommufd acts as a record keeper for
accesses and returns the actual struct pages back to the caller to use
however they need. eg with kmap or the DMA API.
Each caller must create a struct iommufd_access with
iommufd_access_create(), similar to how iommufd_device_bind() works. Using
this struct the caller can access blocks of IOVA using
iommufd_access_pin_pages() or iommufd_access_rw().
Callers must provide a callback that immediately unpins any IOVA being
used within a range. This happens if userspace unmaps the IOVA under the
pin.
The implementation forwards the access requests directly to the iopt
infrastructure that manages the iopt_pages_access.
Link: https://lore.kernel.org/r/14-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add the four functions external drivers need to connect physical DMA to
the IOMMUFD:
iommufd_device_bind() / iommufd_device_unbind()
Register the device with iommufd and establish security isolation.
iommufd_device_attach() / iommufd_device_detach()
Connect a bound device to a page table
Binding a device creates a device object ID in the uAPI, however the
generic API does not yet provide any IOCTLs to manipulate them.
Link: https://lore.kernel.org/r/13-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hw_pagetable object exposes the internal struct iommu_domain's to
userspace. An iommu_domain is required when any DMA device attaches to an
IOAS to control the io page table through the iommu driver.
For compatibility with VFIO the hw_pagetable is automatically created when
a DMA device is attached to the IOAS. If a compatible iommu_domain already
exists then the hw_pagetable associated with it is used for the
attachment.
In the initial series there is no iommufd uAPI for the hw_pagetable
object. The next patch provides driver facing APIs for IO page table
attachment that allows drivers to accept either an IOAS or a hw_pagetable
ID and for the driver to return the hw_pagetable ID that was auto-selected
from an IOAS. The expectation is the driver will provide uAPI through its
own FD for attaching its device to iommufd. This allows userspace to learn
the mapping of devices to iommu_domains and to override the automatic
attachment.
The future HW specific interface will allow userspace to create
hw_pagetable objects using iommu_domains with IOMMU driver specific
parameters. This infrastructure will allow linking those domains to IOAS's
and devices.
Link: https://lore.kernel.org/r/12-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Connect the IOAS to its IOCTL interface. This exposes most of the
functionality in the io_pagetable to userspace.
This is intended to be the core of the generic interface that IOMMUFD will
provide. Every IOMMU driver should be able to implement an iommu_domain
that is compatible with this generic mechanism.
It is also designed to be easy to use for simple non virtual machine
monitor users, like DPDK:
- Universal simple support for all IOMMUs (no PPC special path)
- An IOVA allocator that considers the aperture and the allowed/reserved
ranges
- io_pagetable allows any number of iommu_domains to be connected to the
IOAS
- Automatic allocation and re-use of iommu_domains
Along with room in the design to add non-generic features to cater to
specific HW functionality.
Link: https://lore.kernel.org/r/11-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is the remainder of the IOAS data structure. Provide an object called
an io_pagetable that is composed of iopt_areas pointing at iopt_pages,
along with a list of iommu_domains that mirror the IOVA to PFN map.
At the top this is a simple interval tree of iopt_areas indicating the map
of IOVA to iopt_pages. An xarray keeps track of a list of domains. Based
on the attached domains there is a minimum alignment for areas (which may
be smaller than PAGE_SIZE), an interval tree of reserved IOVA that can't
be mapped and an IOVA of allowed IOVA that can always be mappable.
The concept of an 'access' refers to something like a VFIO mdev that is
accessing the IOVA and using a 'struct page *' for CPU based access.
Externally an API is provided that matches the requirements of the IOCTL
interface for map/unmap and domain attachment.
The API provides a 'copy' primitive to establish a new IOVA map in a
different IOAS from an existing mapping by re-using the iopt_pages. This
is the basic mechanism to provide single pinning.
This is designed to support a pre-registration flow where userspace would
setup an dummy IOAS with no domains, map in memory and then establish an
access to pin all PFNs into the xarray.
Copy can then be used to create new IOVA mappings in a different IOAS,
with iommu_domains attached. Upon copy the PFNs will be read out of the
xarray and mapped into the iommu_domains, avoiding any pin_user_pages()
overheads.
Link: https://lore.kernel.org/r/10-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The iopt_pages which represents a logical linear list of full PFNs held in
different storage tiers. Each area points to a slice of exactly one
iopt_pages, and each iopt_pages can have multiple areas and accesses.
The three storage tiers are managed to meet these objectives:
- If no iommu_domain or in-kerenel access exists then minimal memory
should be consumed by iomufd
- If a page has been pinned then an iopt_pages will not pin it again
- If an in-kernel access exists then the xarray must provide the backing
storage to avoid allocations on domain removals
- Otherwise any iommu_domain will be used for storage
In a common configuration with only an iommu_domain the iopt_pages does
not allocate significant memory itself.
The external interface for pages has several logical operations:
iopt_area_fill_domain() will load the PFNs from storage into a single
domain. This is used when attaching a new domain to an existing IOAS.
iopt_area_fill_domains() will load the PFNs from storage into multiple
domains. This is used when creating a new IOVA map in an existing IOAS
iopt_pages_add_access() creates an iopt_pages_access that tracks an
in-kernel access of PFNs. This is some external driver that might be
accessing the IOVA using the CPU, or programming PFNs with the DMA
API. ie a VFIO mdev.
iopt_pages_rw_access() directly perform a memcpy on the PFNs, without
the overhead of iopt_pages_add_access()
iopt_pages_fill_xarray() will load PFNs into the xarray and return a
'struct page *' array. It is used by iopt_pages_access's to extract PFNs
for in-kernel use. iopt_pages_fill_from_xarray() is a fast path when it
is known the xarray is already filled.
As an iopt_pages can be referred to in slices by many areas and accesses
it uses interval trees to keep track of which storage tiers currently hold
the PFNs. On a page-by-page basis any request for a PFN will be satisfied
from one of the storage tiers and the PFN copied to target domain/array.
Unfill actions are similar, on a page by page basis domains are unmapped,
xarray entries freed or struct pages fully put back.
Significant complexity is required to fully optimize all of these data
motions. The implementation calculates the largest consecutive range of
same-storage indexes and operates in blocks. The accumulation of PFNs
always generates the largest contiguous PFN range possible to optimize and
this gathering can cross storage tier boundaries. For cases like 'fill
domains' care is taken to avoid duplicated work and PFNs are read once and
pushed into all domains.
The map/unmap interaction with the iommu_domain always works in contiguous
PFN blocks. The implementation does not require or benefit from any
split/merge optimization in the iommu_domain driver.
This design suggests several possible improvements in the IOMMU API that
would greatly help performance, particularly a way for the driver to map
and read the pfns lists instead of working with one driver call per page
to read, and one driver call per contiguous range to store.
Link: https://lore.kernel.org/r/9-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The top of the data structure provides an IO Address Space (IOAS) that is
similar to a VFIO container. The IOAS allows map/unmap of memory into
ranges of IOVA called iopt_areas. Multiple IOMMU domains (IO page tables)
and in-kernel accesses (like VFIO mdevs) can be attached to the IOAS to
access the PFNs that those IOVA areas cover.
The IO Address Space (IOAS) datastructure is composed of:
- struct io_pagetable holding the IOVA map
- struct iopt_areas representing populated portions of IOVA
- struct iopt_pages representing the storage of PFNs
- struct iommu_domain representing each IO page table in the system IOMMU
- struct iopt_pages_access representing in-kernel accesses of PFNs (ie
VFIO mdevs)
- struct xarray pinned_pfns holding a list of pages pinned by in-kernel
accesses
This patch introduces the lowest part of the datastructure - the movement
of PFNs in a tiered storage scheme:
1) iopt_pages::pinned_pfns xarray
2) Multiple iommu_domains
3) The origin of the PFNs, i.e. the userspace pointer
PFN have to be copied between all combinations of tiers, depending on the
configuration.
The interface is an iterator called a 'pfn_reader' which determines which
tier each PFN is stored and loads it into a list of PFNs held in a struct
pfn_batch.
Each step of the iterator will fill up the pfn_batch, then the caller can
use the pfn_batch to send the PFNs to the required destination. Repeating
this loop will read all the PFNs in an IOVA range.
The pfn_reader and pfn_batch also keep track of the pinned page accounting.
While PFNs are always stored and accessed as full PAGE_SIZE units the
iommu_domain tier can store with a sub-page offset/length to support
IOMMUs with a smaller IOPTE size than PAGE_SIZE.
Link: https://lore.kernel.org/r/8-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is the basic infrastructure of a new miscdevice to hold the iommufd
IOCTL API.
It provides:
- A miscdevice to create file descriptors to run the IOCTL interface over
- A table based ioctl dispatch and centralized extendable pre-validation
step
- An xarray mapping userspace ID's to kernel objects. The design has
multiple inter-related objects held within in a single IOMMUFD fd
- A simple usage count to build a graph of object relations and protect
against hostile userspace racing ioctls
The only IOCTL provided in this patch is the generic 'destroy any object
by handle' operation.
Link: https://lore.kernel.org/r/6-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These complement the group interfaces used by VFIO and are for use by
iommufd. The main difference is that multiple devices in the same group
can all share the ownership by passing the same ownership pointer.
Move the common code into shared functions.
Link: https://lore.kernel.org/r/2-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This queries if a domain linked to a device should expect to support
enforce_cache_coherency() so iommufd can negotiate the rules for when a
domain should be shared or not.
For iommufd a device that declares IOMMU_CAP_ENFORCE_CACHE_COHERENCY will
not be attached to a domain that does not support it.
Link: https://lore.kernel.org/r/1-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If x2apic is not available, hyperv-iommu skips remapping
irqs. This breaks root partition which always needs irqs
remapped.
Fix this by allowing irq remapping regardless of x2apic,
and change hyperv_enable_irq_remapping() to return
IRQ_REMAP_XAPIC_MODE in case x2apic is missing.
Tested with root and non-root hyperv partitions.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1668715899-8971-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The fsl_pamu_probe() returns directly when create_csd() failed, leaving
irq and memories unreleased.
Fix by jumping to error if create_csd() returns error.
Fixes: 695093e38c ("iommu/fsl: Freescale PAMU driver and iommu implementation.")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221121082022.19091-1-yuancan@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The dmar_domain uses bit field members to indicate the behaviors. Add
a bit field for using first level and remove the flags member to avoid
duplication.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20221118132451.114406-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The device_domain_info::domain accurately records the domain attached to
the device. It is unnecessary to check whether the context is present in
the attach_dev path. Remove it to make the code neat.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20221118132451.114406-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
dmar_domain_attach_device() is more meaningful according to what this
helper does.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20221118132451.114406-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Rename iommu_disable_dev_iotlb() to iommu_disable_pci_caps() to pair with
iommu_enable_pci_caps().
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20221118132451.114406-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel IOMMU hardwares support blocking DMA transactions by clearing
the translation table entries. This implements a real blocking domain to
avoid using an empty UNMANAGED domain. The detach_dev callback of the
domain ops is not used in any path. Remove it to avoid dead code as well.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20221118132451.114406-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If domain attaching to device fails, the IOMMU driver should bring the
device to blocking DMA state. The upper layer is expected to recover it
by attaching a new domain. Use device_block_translation() in the error
path of dev_attach to make the behavior specific.
The difference between device_block_translation() and the previous
dmar_remove_one_dev_info() is that, in the scalable mode, it is the
RID2PASID entry instead of context entry being cleared. As a result,
enabling PCI capabilities is moved up.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20221118132451.114406-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Whether or not a domain is attached to the device, the pasid table should
always be valid as long as it has been probed. This moves the pasid table
allocation from the domain attaching device path to device probe path and
frees it in the device release path.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20221118132451.114406-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Report a warning if we fail to disable the MMU-500 prefetcher
- Usual mass of devicetree binding additions
- Qualcomm SMMU refactoring and generic "qcom,smmu-500" addition
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmN70ScQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNGwLB/9X44O2PAhfE3nyZjGLZmtXKORhb/QWeTgj
u05S1a486MdVaqhcZtv7pirZzAc2JoIYfwSRKqXtFIgbS0Rk03J5ktNAIZ6KSxjF
RIzUMzIKo4ph0mcL1PZpDSO67Vc1WC2N5Vw6tZqO2XkesQGjudaGyRBZjUtKWGlQ
11xW9NnrGuw7G7dC4SYbv6O/kkg1FJoplmx9Nd+8indYomHp1NAk3aRUhKULws3K
dgYitABUyZ+37MDFK+8fJaIaWxiTxiYRLqEPsF2wlbczQYk9EcfzgkKrNf8Xw5hJ
1E6vypG5ZqxjIhSEyv/8vf6xTakG1EsC85fkQZw32AJjFG0WVGuU
=gKok
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Arm SMMU updates for 6.2
- Report a warning if we fail to disable the MMU-500 prefetcher
- Usual mass of devicetree binding additions
- Qualcomm SMMU refactoring and generic "qcom,smmu-500" addition
SMMUv2 DT binding additions, including a generic Qualcomm compatible
string ("qcom,smmu-500") which will hopefully spell the end for
pointless SoC-specific additions in future.
* for-joerg/arm-smmu/bindings:
iommu/arm-smmu-qcom: Add SM6350 SMMUv2
dt-bindings: arm-smmu: Add SM6350 GPU SMMUv2
iommu/arm-smmu-qcom: Add generic qcom,smmu-500 match entry
iommu/arm-smmu-qcom: Stop using mmu500 reset for v2 MMUs
iommu/arm-smmu-qcom: Merge table from arm-smmu-qcom-debug into match data
iommu/arm-smmu-qcom: provide separate implementation for SDM845-smmu-500
iommu/arm-smmu-qcom: Move the qcom,adreno-smmu check into qcom_smmu_create
iommu/arm-smmu-qcom: Move implementation data into match data
dt-bindings: arm-smmu: Add generic qcom,smmu-500 bindings
dt-bindings: arm-smmu: add special case for Google Cheza platform
dt-bindings: arm-smmu: fix clocks/clock-names schema
dt-bindings: arm-smmu: Add missing Qualcomm SMMU compatibles
dt-bindings: iommu: arm-smmu: add sdm670 compatible
iommu/arm-smmu-qcom: Add SM6115 support
dt-bindings: arm-smmu: Add compatible for Qualcomm SM6115
drivers: arm-smmu-impl: Add QDU1000 and QRU1000 iommu implementation
dt-bindings: arm-smmu: Add 'compatible' for QDU1000 and QRU1000
DMA allocations can never be turned back into a page pointer, so
requesting compound pages doesn't make sense and it can't even be
supported at all by various backends.
Reject __GFP_COMP with a warning in dma_alloc_attrs, and stop clearing
the flag in the arm dma ops and dma-iommu.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Аdded a return value check for the function
mmu_notifier_register().
Return value of a function 'mmu_notifier_register'
called at iommu_v2.c:642 is not checked,
but it is usually checked for this function
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Link: https://lore.kernel.org/r/20221118104252.122809-1-arefev@swemel.ru
[joro: Fix commit message ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it before returning from ppr_notifier()
to avoid refcount leak.
Fixes: daae2d25a4 ("iommu/amd: Don't copy GCR3 table root pointer")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221118093604.216371-1-yangyingliang@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
SRS cap is the hardware cap telling if the hardware IOMMU can support
requests seeking supervisor privilege or not. SRE bit in scalable-mode
PASID table entry is treated as Reserved(0) for implementation not
supporting SRS cap.
Checking SRS cap before setting SRE bit can avoid the non-recoverable
fault of "Non-zero reserved field set in PASID Table Entry" caused by
setting SRE bit while there is no SRS cap support. The fault messages
look like below:
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [00:0d.0] fault addr 0x1154e1000
[fault reason 0x5a]
SM: Non-zero reserved field set in PASID Table Entry
Fixes: 6f7db75e1c ("iommu/vt-d: Add second level page table interface")
Cc: stable@vger.kernel.org
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20221115070346.1112273-1-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20221116051544.26540-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The A/D bits are preseted for IOVA over first level(FL) usage for both
kernel DMA (i.e, domain typs is IOMMU_DOMAIN_DMA) and user space DMA
usage (i.e., domain type is IOMMU_DOMAIN_UNMANAGED).
Presetting A bit in FL requires to preset the bit in every related paging
entries, including the non-leaf ones. Otherwise, hardware may treat this
as an error. For example, in a case of ECAP_REG.SMPWC==0, DMA faults might
occur with below DMAR fault messages (wrapped for line length) dumped.
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [aa:00.0] fault addr 0x10c3a6000
[fault reason 0x90]
SM: A/D bit update needed in first-level entry when set up in no snoop
Fixes: 289b3b005c ("iommu/vt-d: Preset A/D bits for user space DMA usage")
Cc: stable@vger.kernel.org
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20221113010324.1094483-1-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20221116051544.26540-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Update map/unmap to the new multi-page interfaces, which is dead easy
since we just pass them through to io-pgtable anyway. Since these are
domain ops now, the domain is inherently valid (not to mention that
container_of() wouldn't return NULL anyway), so garbage-collect that
check in the process.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/ad859ccc24720d72f8eafd03817c1fc11255ddc1.1668100209.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the core API has a proper notion of multi-page mappings, clean
up the old pgsize_bitmap hack by implementing the new interfaces
instead. This time we'll get the return values for unmaps correct too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/9026464e8380b92d10d09103e215eb4306a5df7c.1668100209.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the core API has a proper notion of multi-page mappings, clean
up the old pgsize_bitmap hack by implementing the new interfaces
instead. This also brings a slight simplification since we no longer
need to worry about rolling back partial mappings on failure.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/768e90ff0c2d61e4723049c1349d8bac58daa437.1668100209.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Registering a SYSMMU platform driver might directly trigger initializing
IOMMU domains and performing the initial mappings. Also the IOMMU core
might use the IOMMU hardware once it has been registered with
iommu_device_register() function. Ensure that all driver resources are
allocated and initialized before the driver advertise its presence to the
platform bus and the IOMMU subsystem.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20221110154407.26531-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
I/O translation tables on s390 use 8 byte page table entries and tables
which are allocated lazily but only freed when the entire I/O
translation table is torn down. Also each IOVA can at any time only
translate to one physical address Furthermore I/O table accesses by the
IOMMU hardware are cache coherent. With a bit of care we can thus use
atomic updates to manipulate the translation table without having to use
a global lock at all. This is done analogous to the existing I/O
translation table handling code used on Intel and AMD x86 systems.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221109142903.4080275-6-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When invalidating existing table entries for unmap there is no need to
know the physical address beforehand so don't do an extra walk of the
IOMMU table to get it. Also when invalidating entries not finding an
entry indicates an invalid unmap and not a lack of memory we also don't
need to undo updates in this case. Implement this by splitting
s390_iommu_update_trans() in a variant for validating and one for
invalidating translations.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221109142903.4080275-5-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The s390_domain->devices list is only added to when new devices are
attached but is iterated through in read-only fashion for every mapping
operation as well as for I/O TLB flushes and thus in performance
critical code causing contention on the s390_domain->list_lock.
Fortunately such a read-mostly linked list is a standard use case for
RCU. This change closely follows the example fpr RCU protected list
given in Documentation/RCU/listRCU.rst.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221109142903.4080275-4-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently s390-iommu does an I/O TLB flush (RPCIT) for every update of
the I/O translation table explicitly. For one this is wasteful since
RPCIT can be skipped after a mapping operation if zdev->tlb_refresh is
unset. Moreover we can do a single RPCIT for a range of pages including
whne doing lazy unmapping.
Thankfully both of these optimizations can be achieved by implementing
the IOMMU operations common code provides for the different types of I/O
tlb flushes:
* flush_iotlb_all: Flushes the I/O TLB for the entire IOVA space
* iotlb_sync: Flushes the I/O TLB for a range of pages that can be
gathered up, for example to implement lazy unmapping.
* iotlb_sync_map: Flushes the I/O TLB after a mapping operation
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221109142903.4080275-3-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If a zPCI device is in the error state while switching IOMMU domains
zpci_register_ioat() will fail and we would end up with the device not
attached to any domain. In this state since zdev->dma_table == NULL
a reset via zpci_hot_reset_device() would wrongfully re-initialize the
device for DMA API usage using zpci_dma_init_device(). As automatic
recovery is currently disabled while attached to an IOMMU domain this
only affects slot resets triggered through other means but will affect
automatic recovery once we switch to using dma-iommu.
Additionally with that switch common code expects attaching to the
default domain to always work so zpci_register_ioat() should only fail
if there is no chance to recover anyway, e.g. if the device has been
unplugged.
Improve the robustness of attach by specifically looking at the status
returned by zpci_mod_fc() to determine if the device is unavailable and
in this case simply ignore the error. Once the device is reset
zpci_hot_reset_device() will then correctly set the domain's DMA
translation tables.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221109142903.4080275-2-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We currently have 3 different ways that __iommu_probe_device() may be
called, but no real guarantee that multiple callers can't tread on each
other, especially once asynchronous driver probe gets involved. It would
likely have taken a fair bit of luck to hit this previously, but commit
57365a04c9 ("iommu: Move bus setup to IOMMU device registration") ups
the odds since now it's not just omap-iommu that may trigger multiple
bus_iommu_probe() calls in parallel if probing asynchronously.
Add a lock to ensure we can't try to double-probe a device, and also
close some possible race windows to make sure we're truly robust against
trying to double-initialise a group via two different member devices.
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Fixes: 57365a04c9 ("iommu: Move bus setup to IOMMU device registration")
Link: https://lore.kernel.org/r/1946ef9f774851732eed78760a78ec40dbc6d178.1667591503.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Until now the port ID was always encoded as a 5-bit data. On MT8365,
the port ID is encoded as a 6-bit data. This requires to add extra
macro F_MMU_INT_ID_LARB_ID_EXT, and F_MMU_INT_ID_PORT_ID_EXT in order
to support 6-bit encoded port IDs.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221001-iommu-support-v6-2-be4fe8da254b@baylibre.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
platform_get_resource() may return NULL pointer, we need check its
return value to avoid null-ptr-deref in resource_size().
Fixes: 42d57fc58a ("iommu/mediatek: Initialise/Remove for multi bank dev")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221029103550.3774365-1-yangyingliang@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, these options cause the following libkmod error:
libkmod: ERROR ../libkmod/libkmod-config.c:489 kcmdline_parse_result: \
Ignoring bad option on kernel command line while parsing module \
name: 'ivrs_xxxx[XX:XX'
Fix by introducing a new parameter format for these options and
throw a warning for the deprecated format.
Users are still allowed to omit the PCI Segment if zero.
Adding a Link: to the reason why we're modding the syntax parsing
in the driver and not in libkmod.
Fixes: ca3bf5d47c ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-modules/20200310082308.14318-2-lucas.demarchi@intel.com/
Reported-by: Kim Phillips <kim.phillips@amd.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/20220919155638.391481-2-kim.phillips@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The second (UID) strcmp in acpi_dev_hid_uid_match considers
"0" and "00" different, which can prevent device registration.
Have the AMD IOMMU driver's ivrs_acpihid parsing code remove
any leading zeroes to make the UID strcmp succeed. Now users
can safely specify "AMDxxxxx:00" or "AMDxxxxx:0" and expect
the same behaviour.
Fixes: ca3bf5d47c ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: stable@vger.kernel.org
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220919155638.391481-1-kim.phillips@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the PCI/MSI core code does early checking for multi-MSI support
X86_IRQ_ALLOC_CONTIGUOUS_VECTORS is not required anymore.
Remove the flag and rely on MSI_FLAG_MULTI_PCI_MSI.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122015.865042356@linutronix.de
Adjust to reality and remove another layer of pointless Kconfig
indirection. CONFIG_GENERIC_MSI_IRQ is good enough to serve
all purposes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.524842979@linutronix.de
Default reset value of secure banked register SMMU_sACR.cache_lock is 1.
If it is not been set to 0 by secure software(eg: atf), the non-secure
linux cannot clear ARM_MMU500_ACTLR_CPRE bit. In this situation,
the prefetcher errata is not applied successfully, warn once.
Signed-off-by: Chen Lin <chen45464546@163.com>
Link: https://lore.kernel.org/r/20221103222121.3051-1-chen45464546@163.com
[will: Tweaked wording of diagnostic]
Signed-off-by: Will Deacon <will@kernel.org>
Add generic qcom,smmu-500 compatibility string. Newer platforms should
use this generic entry rather than declaring per-SoC entries.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-11-dmitry.baryshkov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The arm_mmu500_reset() writes into registers specific for MMU500. For
the generic ARM SMMU v2 these registers (sACR) are defined as
'implementation defined'. Downstream Qualcomm driver for SMMUv2 doesn't
touch them.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-10-dmitry.baryshkov@linaro.org
[will: Remove unused 'qcom_smmu_data' stucture]
Signed-off-by: Will Deacon <will@kernel.org>
There is little point in having a separate match table in
arm-smmu-qcom-debug.c. Merge it into the main match data table in
arm-smmu-qcom.c
Note, this also enables debug support for qdu1000, sm6115, sm6375 and
ACPI-based sc8180x systems, since these SoCs are expected to support
tlb_sync debug.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-9-dmitry.baryshkov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
There is only one platform, which needs special care in the reset
function, the SDM845. Add special handler for sdm845 and drop the
qcom_smmu500_reset() function.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-8-dmitry.baryshkov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Move special handling of qcom,adreno-smmu into qcom_smmu_create()
function. This allows us to further customize the Adreno SMMU
implementation.
Note, this also adds two entries to the qcom_smmu_impl_of_match table.
They were used with the qcom,adreno-smmu compat and were handled by the
removed clause.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-7-dmitry.baryshkov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
In preparation to rework of the implementation and configuration
details, make qcom_smmu_create() accept new qcom_smmu_match_data
structure pointer. Make implementation a field in this struct.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-6-dmitry.baryshkov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Add the Qualcomm SM6115 platform to the list of compatible,
this target uses MMU500 for both APSS and GPU.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20221030094258.486428-6-iskren.chernev@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
As pointed out in the corresponding downstream fix [0], the permission bits
of the page table entries are compatible between v1 and v2 of the IOMMU.
This is in contrast to the current mainline code that incorrectly assumes
that the read and write permission bits are switched. Fix the permission
bits by reusing the v1 bit defines.
[0] e3bc123a22
Fixes: c55356c534 ("iommu: rockchip: Add support for iommu v2")
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20221102063553.2464161-1-michael.riesch@wolfvision.net
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This series is to replace the previous EMEDIUMTYPE patch in a VFIO series:
https://lore.kernel.org/kvm/Yxnt9uQTmbqul5lf@8bytes.org/
The purpose is to regulate all existing ->attach_dev callback functions to
use EINVAL exclusively for an incompatibility error between a device and a
domain. This allows VFIO and IOMMUFD to detect such a soft error, and then
try a different domain with the same device.
Among all the patches, the first two are preparatory changes. And then one
patch to update kdocs and another three patches for the enforcement
effort.
Link: https://lore.kernel.org/r/cover.1666042872.git.nicolinc@nvidia.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY2JjUQAKCRCFwuHvBreF
YaFbAP492zvOEaZaRxiK4XcdsU1ZBCovB/2Keh/QIQdb7Ig6hgD/dW7TygTP1+4a
Oqpcu/6aLeHvhayfZt1142S3e0HuHwU=
=g5C+
-----END PGP SIGNATURE-----
Merge tag 'for-joerg' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd into core
iommu: Define EINVAL as device/domain incompatibility
This series is to replace the previous EMEDIUMTYPE patch in a VFIO series:
https://lore.kernel.org/kvm/Yxnt9uQTmbqul5lf@8bytes.org/
The purpose is to regulate all existing ->attach_dev callback functions to
use EINVAL exclusively for an incompatibility error between a device and a
domain. This allows VFIO and IOMMUFD to detect such a soft error, and then
try a different domain with the same device.
Among all the patches, the first two are preparatory changes. And then one
patch to update kdocs and another three patches for the enforcement
effort.
Link: https://lore.kernel.org/r/cover.1666042872.git.nicolinc@nvidia.com
Rename iommu-sva-lib.c[h] to iommu-sva.c[h] as it contains all code
for SVA implementation in iommu core.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-14-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tweak the I/O page fault handling framework to route the page faults to
the domain and call the page fault handler retrieved from the domain.
This makes the I/O page fault handling framework possible to serve more
usage scenarios as long as they have an IOMMU domain and install a page
fault handler in it. Some unused functions are also removed to avoid
dead code.
The iommu_get_domain_for_dev_pasid() which retrieves attached domain
for a {device, PASID} pair is used. It will be used by the page fault
handling framework which knows {device, PASID} reported from the iommu
driver. We have a guarantee that the SVA domain doesn't go away during
IOPF handling, because unbind() won't free the domain until all the
pending page requests have been flushed from the pipeline. The drivers
either call iopf_queue_flush_dev() explicitly, or in stall case, the
device driver is required to flush all DMAs including stalled
transactions before calling unbind().
This also renames iopf_handle_group() to iopf_handler() to avoid
confusing.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-13-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds some mechanisms around the iommu_domain so that the I/O page
fault handling framework could route a page fault to the domain and
call the fault handler from it.
Add pointers to the page fault handler and its private data in struct
iommu_domain. The fault handler will be called with the private data
as a parameter once a page fault is routed to the domain. Any kernel
component which owns an iommu domain could install handler and its
private parameter so that the page fault could be further routed and
handled.
This also prepares the SVA implementation to be the first consumer of
the per-domain page fault handling model. The I/O page fault handler
for SVA is copied to the SVA file with mmget_not_zero() added before
mmap_read_lock().
Suggested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-12-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These ops'es have been deprecated. There's no need for them anymore.
Remove them to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-11-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The existing iommu SVA interfaces are implemented by calling the SVA
specific iommu ops provided by the IOMMU drivers. There's no need for
any SVA specific ops in iommu_ops vector anymore as we can achieve
this through the generic attach/detach_dev_pasid domain ops.
This refactors the IOMMU SVA interfaces implementation by using the
iommu_attach/detach_device_pasid interfaces and align them with the
concept of the SVA iommu domain. Put the new SVA code in the SVA
related file in order to make it self-contained.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-10-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add support for SVA domain allocation and provide an SVA-specific
iommu_domain_ops. This implementation is based on the existing SVA
code. Possible cleanup and refactoring are left for incremental
changes later.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20221031005917.45690-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add support for SVA domain allocation and provide an SVA-specific
iommu_domain_ops. This implementation is based on the existing SVA
code. Possible cleanup and refactoring are left for incremental
changes later.
The VT-d driver will also need to support setting a DMA domain to a
PASID of device. Current SVA implementation uses different data
structures to track the domain and device PASID relationship. That's
the reason why we need to check the domain type in remove_dev_pasid
callback. Eventually we'll consolidate the data structures and remove
the need of domain type check.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The SVA iommu_domain represents a hardware pagetable that the IOMMU
hardware could use for SVA translation. This adds some infrastructures
to support SVA domain in the iommu core. It includes:
- Extend the iommu_domain to support a new IOMMU_DOMAIN_SVA domain
type. The IOMMU drivers that support allocation of the SVA domain
should provide its own SVA domain specific iommu_domain_ops.
- Add a helper to allocate an SVA domain. The iommu_domain_free()
is still used to free an SVA domain.
The report_iommu_fault() should be replaced by the new
iommu_report_device_fault(). Leave the existing fault handler with the
existing users and the newly added SVA members excludes it.
Suggested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Attaching an IOMMU domain to a PASID of a device is a generic operation
for modern IOMMU drivers which support PASID-granular DMA address
translation. Currently visible usage scenarios include (but not limited):
- SVA (Shared Virtual Address)
- kernel DMA with PASID
- hardware-assist mediated device
This adds the set_dev_pasid domain ops for setting the domain onto a
PASID of a device and remove_dev_pasid iommu ops for removing any setup
on a PASID of device. This also adds interfaces for device drivers to
attach/detach/retrieve a domain for a PASID of a device.
If multiple devices share a single group, it's fine as long the fabric
always routes every TLP marked with a PASID to the host bridge and only
the host bridge. For example, ACS achieves this universally and has been
checked when pci_enable_pasid() is called. As we can't reliably tell the
source apart in a group, all the devices in a group have to be considered
as the same source, and mapped to the same PASID table.
The DMA ownership is about the whole device (more precisely, iommu group),
including the RID and PASIDs. When the ownership is converted, the pasid
array must be empty. This also adds necessary checks in the DMA ownership
interfaces.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The current kernel DMA with PASID support is based on the SVA with a flag
SVM_FLAG_SUPERVISOR_MODE. The IOMMU driver binds the kernel memory address
space to a PASID of the device. The device driver programs the device with
kernel virtual address (KVA) for DMA access. There have been security and
functional issues with this approach:
- The lack of IOTLB synchronization upon kernel page table updates.
(vmalloc, module/BPF loading, CONFIG_DEBUG_PAGEALLOC etc.)
- Other than slight more protection, using kernel virtual address (KVA)
has little advantage over physical address. There are also no use
cases yet where DMA engines need kernel virtual addresses for in-kernel
DMA.
This removes SVM_FLAG_SUPERVISOR_MODE support from the IOMMU interface.
The device drivers are suggested to handle kernel DMA with PASID through
the kernel DMA APIs.
The drvdata parameter in iommu_sva_bind_device() and all callbacks is not
needed anymore. Cleanup them as well.
Link: https://lore.kernel.org/linux-iommu/20210511194726.GP1002214@nvidia.com/
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use this field to save the number of PASIDs that a device is able to
consume. It is a generic attribute of a device and lifting it into the
per-device dev_iommu struct could help to avoid the boilerplate code
in various IOMMU drivers.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use this field to keep the number of supported PASIDs that an IOMMU
hardware is able to support. This is a generic attribute of an IOMMU
and lifting it into the per-IOMMU device structure makes it possible
to allocate a PASID for device without calls into the IOMMU drivers.
Any iommu driver that supports PASID related features should set this
field before enabling them on the devices.
In the Intel IOMMU driver, intel_iommu_sm is moved to CONFIG_INTEL_IOMMU
enclave so that the pasid_supported() helper could be used in dmar.c
without compilation errors.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Allocated iova ranges need to be invalidated immediately or otherwise
they might or might not work when used by master or CPU. This was
discovered when running video decoder conformity test with Cedrus. Some
videos were now and then decoded incorrectly and generated page faults.
According to vendor driver, it's enough to invalidate just start and end
TLB and PTW cache lines. Documentation says that neighbouring lines must
be invalidated too. Finally, when page fault occurs, that iova must be
invalidated the same way, according to documentation.
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-6-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Function sun50i_table_flush() takes number of entries as an argument,
not number of bytes. Fix that mistake in sun50i_dte_get_page_table().
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-5-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Because driver has enum type permissions and iommu subsystem has bitmap
type, we have to be careful how check for combined read and write
permissions is done. In such case, we have to mask both permissions and
check that both are set at the same time.
Current code just masks both flags but doesn't check that both are set.
In short, it always sets R/W permission, regardles if requested
permissions were RO, WO or RW. Fix that.
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-4-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We have to reset masters for all faults - permissions, L1 fault or L2
fault. Currently it's done only for permissions. If other type of fault
happens, master is in locked up state. Fix that by really considering
all fault sources.
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-3-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reset signal is asserted by writing 0 to the corresponding locations of
masters we want to reset. So in order to deassert all reset signals, we
should write 1's to all locations.
Current code writes 1's to locations of masters which were just reset
which is good. However, at the same time it also writes 0's to other
locations and thus asserts reset signals of remaining masters. Fix code
by writing all 1's when we want to deassert all reset signals.
This bug was discovered when working with Cedrus (video decoder). When
it faulted, display went blank due to reset signal assertion.
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-2-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
While s390-iommu currently implements the map_page()/unmap_page()
operations which only map/unmap a single page at a time the internal
s390_iommu_update_trans() API already supports mapping/unmapping a range
of pages at once. Take advantage of this by implementing the
map_pages()/unmap_pages() operations instead thus allowing users of the
IOMMU drivers to map multiple pages in a single call followed by
a single I/O TLB flush if needed.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221025115657.1666860-7-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The .pgsize_bitmap property of struct iommu_ops is not a page mask but
rather has a bit set for each size of pages the IOMMU supports. As the
comment correctly pointed out at this moment the code only support 4K
pages so simply use SZ_4K here.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221025115657.1666860-6-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The domain->geometry.aperture_end specifies the last valid address treat
it as such when checking if a DMA address is valid.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221025115657.1666860-5-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The s390 IOMMU driver currently sets the IOMMU domain's aperture to
match the device specific DMA address range of the device that is first
attached. This is not ideal. For one if the domain has no device
attached in the meantime the aperture could be shrunk allowing
translations outside the aperture to exist in the translation tables.
Also this is a bit of a misuse of the aperture which really should
describe what addresses can be translated and not some device specific
limitations.
Instead of misusing the aperture like this we can instead create
reserved ranges for the ranges inaccessible to the attached devices
allowing devices with overlapping ranges to still share an IOMMU domain.
This also significantly simplifies s390_iommu_attach_device() allowing
us to move the aperture check to the beginning of the function and
removing the need to hold the device list's lock to check the aperture.
As we then use the same aperture for all domains and it only depends on
the table properties we can already check zdev->start_dma/end_dma at
probe time and turn the check on attach into a WARN_ON().
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221025115657.1666860-4-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The struct s390_domain_device serves the sole purpose as list entry for
the devices list of a struct s390_domain. As it contains no additional
information besides a list_head and a pointer to the struct zpci_dev we
can simplify things and just thread the device list through struct
zpci_dev directly. This removes the need to allocate during domain
attach and gets rid of one level of indirection during mapping
operations.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221025115657.1666860-3-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit fa7e9ecc5e ("iommu/s390: Tolerate repeat attach_dev
calls") we can end up with duplicates in the list of devices attached to
a domain. This is inefficient and confusing since only one domain can
actually be in control of the IOMMU translations for a device. Fix this
by detaching the device from the previous domain, if any, on attach.
Add a WARN_ON() in case we still have attached devices on freeing the
domain. While here remove the re-attach on failure dance as it was
determined to be unlikely to help and may confuse debug and recovery.
Fixes: fa7e9ecc5e ("iommu/s390: Tolerate repeat attach_dev calls")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221025115657.1666860-2-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Variable cnt is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20221024134301.2158939-1-colin.i.king@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
NO_IRQ is used to check the return of irq_of_parse_and_map().
On some architecture NO_IRQ is 0, on other architectures it is -1.
irq_of_parse_and_map() returns 0 on error, independent of NO_IRQ.
So use 0 instead of using NO_IRQ.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/2a2570a8d12c80a7d36837b6c586daa708ca09d7.1665033732.git.christophe.leroy@csgroup.eu
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The mtk_iommu and virtio drivers have places in the ->attach_dev callback
functions that return hardcode errnos instead of the returned values, but
callers of these ->attach_dv callback functions may care. Propagate them
directly without the extra conversions.
Link: https://lore.kernel.org/r/ca8c5a447b87002334f83325f28823008b4ce420.1666042873.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Following the new rules in include/linux/iommu.h kdocs, update all drivers
->attach_dev callback functions to return EINVAL in the failure paths that
are related to domain incompatibility.
Also, drop adjacent error prints to prevent a kernel log spam.
Link: https://lore.kernel.org/r/f52a07f7320da94afe575c9631340d0019a203a7.1666042873.git.nicolinc@nvidia.com
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Following the new rules in include/linux/iommu.h kdocs, EINVAL now can be
used to indicate that domain and device are incompatible by a caller that
treats it as a soft failure and tries attaching to another domain.
On the other hand, there are ->attach_dev callback functions returning it
for obvious device-specific errors. They will result in some inefficiency
in the caller handling routine.
Update these places to corresponding errnos following the new rules.
Link: https://lore.kernel.org/r/5924c03bea637f05feb2a20d624bae086b555ec5.1666042872.git.nicolinc@nvidia.com
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cases like VFIO wish to attach a device to an existing domain that was
not allocated specifically from the device. This raises a condition
where the IOMMU driver can fail the domain attach because the domain and
device are incompatible with each other.
This is a soft failure that can be resolved by using a different domain.
Provide a dedicated errno EINVAL from the IOMMU driver during attach that
the reason why the attach failed is because of domain incompatibility.
VFIO can use this to know that the attach is a soft failure and it should
continue searching. Otherwise, the attach will be a hard failure and VFIO
will return the code to userspace.
Update kdocs to add rules of return value to the attach_dev op and APIs.
Link: https://lore.kernel.org/r/bd56d93c18621104a0fa1b0de31e9b760b81b769.1666042872.git.nicolinc@nvidia.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The same checks are done in amd_iommu_probe_device(). If any of them fails
there, then the device won't get a group, so there's no way for it to even
reach amd_iommu_attach_device anymore.
Link: https://lore.kernel.org/r/c054654a81f2b675c73108fe4bf10e45335a721a.1666042872.git.nicolinc@nvidia.com
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A splat from kmem_cache_destroy() was seen with a kernel prior to
commit ee2653bbe8 ("iommu/vt-d: Remove domain and devinfo mempool")
when there was a failure in init_dmars(), because the iommu_domain
cache still had objects. While the mempool code is now gone, there
still is a leak of the si_domain memory if init_dmars() fails. So
clean up si_domain in the init_dmars() error path.
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: 86080ccc22 ("iommu/vt-d: Allocate si_domain in init_dmars()")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20221010144842.308890-1-jsnitsel@redhat.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 5f64ce5411 ("iommu/vt-d: Duplicate iommu_resv_region objects
per device list") converted rcu_lock in get_resv_regions to
dmar_global_lock to allow sleeping in iommu_alloc_resv_region(). This
introduced possible recursive locking if get_resv_regions is called from
within a section where intel_iommu_init() already holds dmar_global_lock.
Especially, after commit 57365a04c9 ("iommu: Move bus setup to IOMMU
device registration"), below lockdep splats could always be seen.
============================================
WARNING: possible recursive locking detected
6.0.0-rc4+ #325 Tainted: G I
--------------------------------------------
swapper/0/1 is trying to acquire lock:
ffffffffa8a18c90 (dmar_global_lock){++++}-{3:3}, at:
intel_iommu_get_resv_regions+0x25/0x270
but task is already holding lock:
ffffffffa8a18c90 (dmar_global_lock){++++}-{3:3}, at:
intel_iommu_init+0x36d/0x6ea
...
Call Trace:
<TASK>
dump_stack_lvl+0x48/0x5f
__lock_acquire.cold.73+0xad/0x2bb
lock_acquire+0xc2/0x2e0
? intel_iommu_get_resv_regions+0x25/0x270
? lock_is_held_type+0x9d/0x110
down_read+0x42/0x150
? intel_iommu_get_resv_regions+0x25/0x270
intel_iommu_get_resv_regions+0x25/0x270
iommu_create_device_direct_mappings.isra.28+0x8d/0x1c0
? iommu_get_dma_cookie+0x6d/0x90
bus_iommu_probe+0x19f/0x2e0
iommu_device_register+0xd4/0x130
intel_iommu_init+0x3e1/0x6ea
? iommu_setup+0x289/0x289
? rdinit_setup+0x34/0x34
pci_iommu_init+0x12/0x3a
do_one_initcall+0x65/0x320
? rdinit_setup+0x34/0x34
? rcu_read_lock_sched_held+0x5a/0x80
kernel_init_freeable+0x28a/0x2f3
? rest_init+0x1b0/0x1b0
kernel_init+0x1a/0x130
ret_from_fork+0x1f/0x30
</TASK>
This rolls back dmar_global_lock to rcu_lock in get_resv_regions to avoid
the lockdep splat.
Fixes: 57365a04c9 ("iommu: Move bus setup to IOMMU device registration")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220927053109.4053662-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add gfp parameter to iommu_alloc_resv_region() for the callers to specify
the memory allocation behavior. Thus iommu_alloc_resv_region() could also
be available in critical contexts.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220927053109.4053662-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- Removal of the bus_set_iommu() interface which became
unnecesary because of IOMMU per-device probing
- Make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- Support for AMD IOMMUv2 page-tables for the DMA-API layer. The
v2 page-tables are compatible with the x86 CPU page-tables.
Using them for DMA-API prepares support for hardware-assisted
IOMMU virtualization
- Support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- Some smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=h0sT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- remove the bus_set_iommu() interface which became unnecesary because
of IOMMU per-device probing
- make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- support for AMD IOMMUv2 page-tables for the DMA-API layer.
The v2 page-tables are compatible with the x86 CPU page-tables. Using
them for DMA-API prepares support for hardware-assisted IOMMU
virtualization
- support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- some smaller fixes and cleanups
* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
iommu/vt-d: Avoid unnecessary global DMA cache invalidation
iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
iommu/vt-d: Remove pasid_set_eafe()
iommu/vt-d: Decouple PASID & PRI enabling from SVA
iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
iommu: dart: Support t6000 variant
iommu/io-pgtable-dart: Add DART PTE support for t6000
iommu/io-pgtable: Add DART subpage protection support
iommu/io-pgtable: Move Apple DART support to its own file
iommu/mediatek: Add support for MT6795 Helio X10 M4Us
iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
dt-bindings: mediatek: Add bindings for MT6795 M4U
iommu/iova: Fix module config properly
iommu/amd: Fix sparse warning
iommu/amd: Remove outdated comment
iommu/amd: Free domain ID after domain_flush_pages
iommu/amd: Free domain id in error path
iommu/virtio: Fix compile error with viommu_capable()
...
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
- arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE
vector granule register added to the user regs together with SVE perf
extensions documentation.
- SVE updates: add HWCAP for SVE EBF16, update the SVE ABI documentation
to match the actual kernel behaviour (zeroing the registers on syscall
rather than "zeroed or preserved" previously).
- More conversions to automatic system registers generation.
- vDSO: use self-synchronising virtual counter access in gettimeofday()
if the architecture supports it.
- arm64 stacktrace cleanups and improvements.
- arm64 atomics improvements: always inline assembly, remove LL/SC
trampolines.
- Improve the reporting of EL1 exceptions: rework BTI and FPAC exception
handling, better EL1 undefs reporting.
- Cortex-A510 erratum 2658417: remove BF16 support due to incorrect
result.
- arm64 defconfig updates: build CoreSight as a module, enable options
necessary for docker, memory hotplug/hotremove, enable all PMUs
provided by Arm.
- arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME
extensions).
- arm64 ftraces updates/fixes: fix module PLTs with mcount, remove
unused function.
- kselftest updates for arm64: simple HWCAP validation, FP stress test
improvements, validation of ZA regs in signal handlers, include larger
SVE and SME vector lengths in signal tests, various cleanups.
- arm64 alternatives (code patching) improvements to robustness and
consistency: replace cpucap static branches with equivalent
alternatives, associate callback alternatives with a cpucap.
- Miscellaneous updates: optimise kprobe performance of patching
single-step slots, simplify uaccess_mask_ptr(), move MTE registers
initialisation to C, support huge vmalloc() mappings, run softirqs on
the per-CPU IRQ stack, compat (arm32) misalignment fixups for
multiword accesses.
-----BEGIN PGP SIGNATURE-----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=jl3Z
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 perf: DDR PMU driver for Alibaba's T-Head Yitian 710 SoC, SVE
vector granule register added to the user regs together with SVE perf
extensions documentation.
- SVE updates: add HWCAP for SVE EBF16, update the SVE ABI
documentation to match the actual kernel behaviour (zeroing the
registers on syscall rather than "zeroed or preserved" previously).
- More conversions to automatic system registers generation.
- vDSO: use self-synchronising virtual counter access in gettimeofday()
if the architecture supports it.
- arm64 stacktrace cleanups and improvements.
- arm64 atomics improvements: always inline assembly, remove LL/SC
trampolines.
- Improve the reporting of EL1 exceptions: rework BTI and FPAC
exception handling, better EL1 undefs reporting.
- Cortex-A510 erratum 2658417: remove BF16 support due to incorrect
result.
- arm64 defconfig updates: build CoreSight as a module, enable options
necessary for docker, memory hotplug/hotremove, enable all PMUs
provided by Arm.
- arm64 ptrace() support for TPIDR2_EL0 (register provided with the SME
extensions).
- arm64 ftraces updates/fixes: fix module PLTs with mcount, remove
unused function.
- kselftest updates for arm64: simple HWCAP validation, FP stress test
improvements, validation of ZA regs in signal handlers, include
larger SVE and SME vector lengths in signal tests, various cleanups.
- arm64 alternatives (code patching) improvements to robustness and
consistency: replace cpucap static branches with equivalent
alternatives, associate callback alternatives with a cpucap.
- Miscellaneous updates: optimise kprobe performance of patching
single-step slots, simplify uaccess_mask_ptr(), move MTE registers
initialisation to C, support huge vmalloc() mappings, run softirqs on
the per-CPU IRQ stack, compat (arm32) misalignment fixups for
multiword accesses.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (126 commits)
arm64: alternatives: Use vdso/bits.h instead of linux/bits.h
arm64/kprobe: Optimize the performance of patching single-step slot
arm64: defconfig: Add Coresight as module
kselftest/arm64: Handle EINTR while reading data from children
kselftest/arm64: Flag fp-stress as exiting when we begin finishing up
kselftest/arm64: Don't repeat termination handler for fp-stress
ARM64: reloc_test: add __init/__exit annotations to module init/exit funcs
arm64/mm: fold check for KFENCE into can_set_direct_map()
arm64: ftrace: fix module PLTs with mcount
arm64: module: Remove unused plt_entry_is_initialized()
arm64: module: Make plt_equals_entry() static
arm64: fix the build with binutils 2.27
kselftest/arm64: Don't enable v8.5 for MTE selftest builds
arm64: uaccess: simplify uaccess_mask_ptr()
arm64: asm/perf_regs.h: Avoid C++-style comment in UAPI header
kselftest/arm64: Fix typo in hwcap check
arm64: mte: move register initialization to C
arm64: mm: handle ARM64_KERNEL_USES_PMD_MAPS in vmemmap_populate()
arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()
arm64/sve: Add Perf extensions documentation
...
Some VT-d hardware implementations invalidate all DMA remapping hardware
translation caches as part of SRTP flow. The VT-d spec adds a ESRTPS
(Enhanced Set Root Table Pointer Support, section 11.4.2 in VT-d spec)
capability bit to indicate this. With this bit set, software has no need
to issue the global invalidation request.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220919062523.3438951-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some VT-d hardware implementations invalidate all interrupt remapping
hardware translation caches as part of SIRTP flow. The VT-d spec adds
a ESIRTPS (Enhanced Set Interrupt Remap Table Pointer Support, section
11.4.2 in VT-d spec) capability bit to indicate this.
The spec also states in 11.4.4 that hardware also performs global
invalidation on all interrupt remapping caches as part of Interrupt
Remapping Disable operation if ESIRTPS capability bit is set.
This checks the ESIRTPS capability bit and skip software global cache
invalidation if it's set.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220921065741.3572495-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This renaming better describes it is for first level page table (a.k.a
first stage page table since VT-d spec 3.4).
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220916071326.2223901-1-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is not used anywhere in the tree. Remove it to avoid dead code.
No functional change intended.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220915081645.1834555-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Previously the PCI PASID and PRI capabilities are enabled in the path of
iommu device probe only if INTEL_IOMMU_SVM is configured and the device
supports ATS. As we've already decoupled the I/O page fault handler from
SVA, we could also decouple PASID and PRI enabling from it to make room
for growth of new features like kernel DMA with PASID, SIOV and nested
translation.
At the same time, the iommu_enable_dev_iotlb() helper is also called in
iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA) path. It's unnecessary
and duplicate. This cleanups this helper to make the code neat.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220915085814.2261409-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The existing I/O page fault handling code accesses the per-PASID SVA data
structures. This is unnecessary and makes the fault handling code only
suitable for SVA scenarios. This removes the SVA data accesses from the
I/O page fault reporting and responding code, so that the fault handling
code could be generic.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220914011821.400986-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The M1 Pro/Max/Ultra SoCs come with a new variant of DART which
supports a larger physical address space with a different PTE format.
Pass through the correct paddr address space size and the PTE format
to the io-pgtable code which will take care of the rest.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20220916094152.87137-6-j@jannau.net
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The DARTs present in the M1 Pro/Max/Ultra SoC use a diffent PTE format.
They support a 42bit physical address space by shifting the paddr and
extending its mask inside the PTE.
They also come with mandatory sub-page protection now which we just
configure to always allow access to the entire page. This feature is
already present but optional on the previous DARTs which allows to
unconditionally configure it.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20220916094152.87137-5-j@jannau.net
Signed-off-by: Joerg Roedel <jroedel@suse.de>
DART allows to only expose a subpage to the device. While this is an
optional feature on the M1 DARTs the new ones present on the Pro/Max
models require this field in every PTE.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20220916094152.87137-4-j@jannau.net
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pte format used by the DARTs found in the Apple M1 (t8103) is not
fully compatible with io-pgtable-arm. The 24 MSB are used for subpage
protection (mapping only parts of page) and conflict with the address
mask. In addition bit 1 is not available for tagging entries but disables
subpage protection. Subpage protection could be useful to support a CPU
granule of 4k with the fixed IOMMU page size of 16k.
The DARTs found on Apple M1 Pro/Max/Ultra use another different pte
format which is even less compatible. To support an output address size
of 42 bit the address is shifted down by 4. Subpage protection is
mandatory and bit 1 signifies uncached mappings used by the display
controller.
It would be advantageous to share code for all known Apple DART
variants to support common features. The page table allocator for DARTs
is less complex since it uses a two levels of translation table without
support for huge pages.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20220916094152.87137-3-j@jannau.net
[ joro: Fix compile warning in __dart_alloc_pages()]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add support for the M4Us found in the MT6795 Helio X10 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220913151148.412312-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In preparation for adding support for MT6795, add a new flag named
TF_PORT_TO_ADDR_MT8173 and use that instead of checking for m4u_plat
type in mtk_iommu_hw_init() to avoid seeing a long list of m4u_plat
checks there in the future.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220913151148.412312-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
CHECK drivers/iommu/amd/iommu.c
drivers/iommu/amd/iommu.c:73:24: warning: symbol 'amd_iommu_ops' was not declared. Should it be static?
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220912063248.7909-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Coresight trace subsystem updates for v6.1 includes:
- Support for HiSilicon PTT trace
- Coresight cleanup of sysfs accessor functions, reduced
code size.
- Expose coresight timestamp source for ETMv4+
- DT binding updates to include missing properties
- Minor documentation, Kconfig text fixes.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=rg+8
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
"coresight: Changes for v6.1
Coresight trace subsystem updates for v6.1 includes:
- Support for HiSilicon PTT trace
- Coresight cleanup of sysfs accessor functions, reduced
code size.
- Expose coresight timestamp source for ETMv4+
- DT binding updates to include missing properties
- Minor documentation, Kconfig text fixes.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>"
* tag 'coresight-next-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
hwtracing: hisi_ptt: Fix up for "iommu/dma: Make header private"
MAINTAINERS: Add maintainer for HiSilicon PTT driver
docs: trace: Add HiSilicon PTT device driver documentation
hwtracing: hisi_ptt: Add tune function support for HiSilicon PCIe Tune and Trace device
hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device
iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity
coresight: cti-sysfs: Mark coresight_cti_reg_store() as __maybe_unused
coresight: Make new csdev_access offsets unsigned
coresight: cti-sysfs: Re-use same functions for similar sysfs register accessors
coresight: Re-use same function for similar sysfs register accessors
coresight: Simplify sysfs accessors by using csdev_access abstraction
coresight: Remove unused function parameter
coresight: etm4x: docs: Add documentation for 'ts_source' sysfs interface
coresight: etm4x: Expose default timestamp source in sysfs
dt-bindings: arm: coresight-tmc: Add 'iommu' property
dt-bindings: arm: coresight: Add 'power-domains' property
coresight: docs: Fix a broken reference
coresight: trbe: fix Kconfig "its" grammar
This reverts commit 9cd4f14344.
Some issues were reported on the original commit. Some thunderbolt devices
don't work anymore due to the following DMA fault.
DMAR: DRHD: handling fault status reg 2
DMAR: [INTR-REMAP] Request device [09:00.0] fault index 0x8080
[fault reason 0x25]
Blocked a compatibility format interrupt request
Bring it back for now to avoid functional regression.
Fixes: 9cd4f14344 ("iommu/vt-d: Fix possible recursive locking in intel_iommu_init()")
Link: https://lore.kernel.org/linux-iommu/485A6EA5-6D58-42EA-B298-8571E97422DE@getmailspring.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216497
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: <stable@vger.kernel.org> # 5.19.x
Reported-and-tested-by: George Hilliard <thirtythreeforty@gmail.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220920081701.3453504-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The AMD IOMMU driver cannot activate PASID mode on a RID without the RID's
translation being set to IDENTITY. Further it requires changing the RID's
page table layout from the normal v1 IOMMU_DOMAIN_IDENTITY layout to a
different v2 layout.
It does this by creating a new iommu_domain, configuring that domain for
v2 identity operation and then attaching it to the group, from within the
driver. This logic assumes the group is already set to the IDENTITY domain
and is being used by the DMA API.
However, since the ownership logic is based on the group's domain pointer
equaling the default domain to detect DMA API ownership, this causes it to
look like the group is not attached to the DMA API any more. This blocks
attaching drivers to any other devices in the group.
In a real system this manifests itself as the HD-audio devices on some AMD
platforms losing their device drivers.
Work around this unique behavior of the AMD driver by checking for
equality of IDENTITY domains based on their type, not their pointer
value. This allows the AMD driver to have two IDENTITY domains for
internal purposes without breaking the check.
Have the AMD driver properly declare that the special domain it created is
actually an IDENTITY domain.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Fixes: 512881eacf ("bus: platform,amba,fsl-mc,PCI: Add device DMA ownership management")
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0-v1-ea566e16b06b+811-amd_owner_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The global rwsem dmar_global_lock was introduced by commit 3a5670e8ac
("iommu/vt-d: Introduce a rwsem to protect global data structures"). It
is used to protect DMAR related global data from DMAR hotplug operations.
The dmar_global_lock used in the intel_iommu_init() might cause recursive
locking issue, for example, intel_iommu_get_resv_regions() is taking the
dmar_global_lock from within a section where intel_iommu_init() already
holds it via probe_acpi_namespace_devices().
Using dmar_global_lock in intel_iommu_init() could be relaxed since it is
unlikely that any IO board must be hot added before the IOMMU subsystem is
initialized. This eliminates the possible recursive locking issue by moving
down DMAR hotplug support after the IOMMU is initialized and removing the
uses of dmar_global_lock in intel_iommu_init().
Fixes: d5692d4af0 ("iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices()")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/894db0ccae854b35c73814485569b634237b5538.1657034828.git.robin.murphy@arm.com
Link: https://lore.kernel.org/r/20220718235325.3952426-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For some reason we refer to ID_AA64MMFR0_EL1.ASIDBits as ASID. Add BITS
into the name, bringing the naming into sync with DDI0487H.a. Due to the
large amount of MixedCase in this register which isn't really consistent
with either the kernel style or the majority of the architecture the use of
upper case is preserved. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-10-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64MMFR0_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A recent fix introduced viommu_capable() but other changes
from Robin change the function signature of the call-back it
is used for.
When both changes are merged a compile error will happen
because the function pointer types mismatch. Fix that by
updating the viommu_capable() signature after the merge.
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20220907151154.21911-1-joro@8bytes.org
The iovad->rcaches check in iova_rcache_get() is pretty much useless
without the same check in iova_rcache_insert().
Instead of adding this symmetric check to fastpath iova_rcache_insert(),
drop the check in iova_rcache_get() in favour of making the IOVA domain
rcache init more robust to failure in future.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1662557681-145906-4-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Two of the magazine helpers have BUG_ON() checks, as follows:
- iova_magazine_pop() - here we ensure that the mag is not empty. However
we already ensure that in the only caller, __iova_rcache_get().
- iova_magazine_push() - here we ensure that the mag is not full. However
we already ensure that in the only caller, __iova_rcache_insert().
As described, the two bug checks are pointless so drop them.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/1662557681-145906-3-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit 32e92d9f6f ("iommu/iova: Separate out rcache init") it
has not been possible to have NULL CPU rcache "loaded" or "prev" magazine
pointers once the IOVA domain has been properly initialized. Previously it
was only possible to have NULL pointers from failure to allocate the
magazines in the IOVA domain initialization. The only other two functions
to modify these pointers - __iova_rcache_{get, insert}() - would already
ensure that these pointers were non-NULL if initially non-NULL.
As such, the mag NULL pointer checks in iova_magazine_full(),
iova_magazine_empty(), and iova_magazine_free_pfns() may be dropped.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/1662557681-145906-2-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The DMA operations of HiSilicon PTT device can only work properly with
identical mappings. So add a quirk for the device to force the domain
as passthrough.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20220816114414.4092-2-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
AMD IOMMU introduces support for Guest I/O protection where the request
from the I/O device without a PASID are treated as if they have PASID 0.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-8-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, PPR/ATS can be enabled only if the domain is type
identity mapping. However, when allowing the IOMMU v2 page table
to be used for DMA-API, the check is no longer valid.
Update the sanity check to only apply for when using AMD_IOMMU_V1
page table mode.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The current function to enable IOMMU v2 also lock the domain.
In order to reuse the same code in different code path, in which
the domain has already been locked, refactor the function to separate
the locking from the enabling logic.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the map_pages() and unmap_pages() callback for the AMD IOMMU
driver to allow calls from iommu core to map and unmap multiple pages.
Also deprecate map/unmap callbacks.
Finally gatherer is not updated by iommu_v1_unmap_pages(). Hence pass
NULL instead of gather to iommu_v1_unmap_pages.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the io_pgtable_ops->unmap_pages() callback for AMD driver
and deprecate io_pgtable_ops->unmap callback.
Also if fetch_pte() returns NULL then return from unmap_mapages()
instead of trying to continue to unmap remaining pages.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit e8ae0e140c ("vfio: Require that devices support DMA cache
coherence") requires IOMMU drivers to advertise
IOMMU_CAP_CACHE_COHERENCY, in order to be used by VFIO. Since VFIO does
not provide to userspace the ability to maintain coherency through cache
invalidations, it requires hardware coherency. Advertise the capability
in order to restore VFIO support.
The meaning of IOMMU_CAP_CACHE_COHERENCY also changed from "IOMMU can
enforce cache coherent DMA transactions" to "IOMMU_CACHE is supported".
While virtio-iommu cannot enforce coherency (of PCIe no-snoop
transactions), it does support IOMMU_CACHE.
We can distinguish different cases of non-coherent DMA:
(1) When accesses from a hardware endpoint are not coherent. The host
would describe such a device using firmware methods ('dma-coherent'
in device-tree, '_CCA' in ACPI), since they are also needed without
a vIOMMU. In this case mappings are created without IOMMU_CACHE.
virtio-iommu doesn't need any additional support. It sends the same
requests as for coherent devices.
(2) When the physical IOMMU supports non-cacheable mappings. Supporting
those would require a new feature in virtio-iommu, new PROBE request
property and MAP flags. Device drivers would use a new API to
discover this since it depends on the architecture and the physical
IOMMU.
(3) When the hardware supports PCIe no-snoop. It is possible for
assigned PCIe devices to issue no-snoop transactions, and the
virtio-iommu specification is lacking any mention of this.
Arm platforms don't necessarily support no-snoop, and those that do
cannot enforce coherency of no-snoop transactions. Device drivers
must be careful about assuming that no-snoop transactions won't end
up cached; see commit e02f5c1bb2 ("drm: disable uncached DMA
optimization for ARM and arm64"). On x86 platforms, the host may or
may not enforce coherency of no-snoop transactions with the physical
IOMMU. But according to the above commit, on x86 a driver which
assumes that no-snoop DMA is compatible with uncached CPU mappings
will also work if the host enforces coherency.
Although these issues are not specific to virtio-iommu, it could be
used to facilitate discovery and configuration of no-snoop. This
would require a new feature bit, PROBE property and ATTACH/MAP
flags.
Cc: stable@vger.kernel.org
Fixes: e8ae0e140c ("vfio: Require that devices support DMA cache coherence")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220825154622.86759-1-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With CONFIG_INTEL_IOMMU_DEBUGFS enabled, below lockdep splat are seen
when an I/O fault occurs on a machine with an Intel IOMMU in it.
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write NO_PASID] Request device [00:1a.0] fault addr 0x0
[fault reason 0x05] PTE Write access is not set
DMAR: Dump dmar0 table entries for IOVA 0x0
DMAR: root entry: 0x0000000127f42001
DMAR: context entry: hi 0x0000000000001502, low 0x000000012d8ab001
================================
WARNING: inconsistent lock state
5.20.0-0.rc0.20220812git7ebfc85e2cd7.10.fc38.x86_64 #1 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
rngd/1006 [HC1[1]:SC0[0]:HE0:SE1] takes:
ff177021416f2d78 (&k->k_lock){?.+.}-{2:2}, at: klist_next+0x1b/0x160
{HARDIRQ-ON-W} state was registered at:
lock_acquire+0xce/0x2d0
_raw_spin_lock+0x33/0x80
klist_add_tail+0x46/0x80
bus_add_device+0xee/0x150
device_add+0x39d/0x9a0
add_memory_block+0x108/0x1d0
memory_dev_init+0xe1/0x117
driver_init+0x43/0x4d
kernel_init_freeable+0x1c2/0x2cc
kernel_init+0x16/0x140
ret_from_fork+0x1f/0x30
irq event stamp: 7812
hardirqs last enabled at (7811): [<ffffffff85000e86>] asm_sysvec_apic_timer_interrupt+0x16/0x20
hardirqs last disabled at (7812): [<ffffffff84f16894>] irqentry_enter+0x54/0x60
softirqs last enabled at (7794): [<ffffffff840ff669>] __irq_exit_rcu+0xf9/0x170
softirqs last disabled at (7787): [<ffffffff840ff669>] __irq_exit_rcu+0xf9/0x170
The klist iterator functions using spin_*lock_irq*() but the klist
insertion functions using spin_*lock(), combined with the Intel DMAR
IOMMU driver iterating over klists from atomic (hardirq) context, where
pci_get_domain_bus_and_slot() calls into bus_find_device() which iterates
over klists.
As currently there's no plan to fix the klist to make it safe to use in
atomic context, this fixes the lockdep splat by avoid calling
pci_get_domain_bus_and_slot() in the hardirq context.
Fixes: 8ac0b64b97 ("iommu/vt-d: Use pci_get_domain_bus_and_slot() in pgtable_walk()")
Reported-by: Lennert Buytenhek <buytenh@wantstofly.org>
Link: https://lore.kernel.org/linux-iommu/Yvo2dfpEh%2FWC+Wrr@wantstofly.org/
Link: https://lore.kernel.org/linux-iommu/YvyBdPwrTuHHbn5X@wantstofly.org/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220819015949.4795-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The per domain spinlock is acquired in iommu_flush_dev_iotlb(), which
is possbile to be called in the interrupt context. For example, the
drm-intel's CI system got completely blocked with below error:
WARNING: inconsistent lock state
6.0.0-rc1-CI_DRM_11990-g6590d43d39b9+ #1 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffff88810440d678 (&domain->lock){+.?.}-{2:2}, at: iommu_flush_dev_iotlb.part.61+0x23/0x80
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0xd3/0x310
_raw_spin_lock+0x2a/0x40
domain_update_iommu_cap+0x20b/0x2c0
intel_iommu_attach_device+0x5bd/0x860
__iommu_attach_device+0x18/0xe0
bus_iommu_probe+0x1f3/0x2d0
bus_set_iommu+0x82/0xd0
intel_iommu_init+0xe45/0x102a
pci_iommu_init+0x9/0x31
do_one_initcall+0x53/0x2f0
kernel_init_freeable+0x18f/0x1e1
kernel_init+0x11/0x120
ret_from_fork+0x1f/0x30
irq event stamp: 162354
hardirqs last enabled at (162354): [<ffffffff81b59274>] _raw_spin_unlock_irqrestore+0x54/0x70
hardirqs last disabled at (162353): [<ffffffff81b5901b>] _raw_spin_lock_irqsave+0x4b/0x50
softirqs last enabled at (162338): [<ffffffff81e00323>] __do_softirq+0x323/0x48e
softirqs last disabled at (162349): [<ffffffff810c1588>] irq_exit_rcu+0xb8/0xe0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&domain->lock);
<Interrupt>
lock(&domain->lock);
*** DEADLOCK ***
1 lock held by swapper/6/0:
This coverts the spin_lock/unlock() into the irq save/restore varieties
to fix the recursive locking issues.
Fixes: ffd5869d93 ("iommu/vt-d: Replace spin_lock_irqsave() with spin_lock()")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20220817025650.3253959-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel IOMMU driver possibly selects between the first-level and the
second-level translation tables for DMA address translation. However,
the levels of page-table walks for the 4KB base page size are calculated
from the SAGAW field of the capability register, which is only valid for
the second-level page table. This causes the IOMMU driver to stop working
if the hardware (or the emulated IOMMU) advertises only first-level
translation capability and reports the SAGAW field as 0.
This solves the above problem by considering both the first level and the
second level when calculating the supported page table levels.
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220817023558.3253263-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The translation table copying code for kdump kernels is currently based
on the extended root/context entry formats of ECS mode defined in older
VT-d v2.5, and doesn't handle the scalable mode formats. This causes
the kexec capture kernel boot failure with DMAR faults if the IOMMU was
enabled in scalable mode by the previous kernel.
The ECS mode has already been deprecated by the VT-d spec since v3.0 and
Intel IOMMU driver doesn't support this mode as there's no real hardware
implementation. Hence this converts ECS checking in copying table code
into scalable mode.
The existing copying code consumes a bit in the context entry as a mark
of copied entry. It needs to work for the old format as well as for the
extended context entries. As it's hard to find such a common bit for both
legacy and scalable mode context entries. This replaces it with a per-
IOMMU bitmap.
Fixes: 7373a8cc38 ("iommu/vt-d: Setup context and enable RID2PASID support")
Cc: stable@vger.kernel.org
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Wen Jin <wen.jin@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220817011035.3250131-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu-dma layer is now mostly encapsulated by iommu_dma_ops, with
only a couple more public interfaces left pertaining to MSI integration.
Since these depend on the main IOMMU API header anyway, move their
declarations there, taking the opportunity to update the half-baked
comments to proper kerneldoc along the way.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/9cd99738f52094e6bed44bfee03fa4f288d20695.1660668998.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Although iommu-dma is a per-architecture chonce, that is currently
implemented in a rather haphazard way. Selecting from the arch Kconfig
was the original logical approach, but is complicated by having to
manage dependencies; conversely, selecting from drivers ends up hiding
the architecture dependency *too* well. Instead, let's just have it
enable itself automatically when IOMMU API support is enabled for the
relevant architectures. It can't get much clearer than that.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/2e33c8bc2b1bb478157b7964bfed976cb7466139.1660668998.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Clean up the remaining trivial bus_set_iommu() callsites along
with the implementation. Now drivers only have to know and care
about iommu_device instances, phew!
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> # s390
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> # s390
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ea383d5f4d74ffe200ab61248e5de6e95846180a.1660572783.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
