Introduce helper function to allow MHI core driver to poll for
a value in a register field. This helps reach a common path to
read and poll register values along with a retry time interval.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617215665-19593-2-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
As of now abbreviations are being used for many state and
execution environment strings. Improve and expand those such that
debug messages are clear.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1617067704-28850-8-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
When moving from SYS_ERROR transition to a different execution
environment, MHI host relies on the BHI register read to spawn
the next image download or wait for READY -> M0 states. The
device can at times move the execution environment to mission
mode when a pass through is expected, which can result in a
stall. Initiate a wait for MHI READY and write M0 such that the
device can proceed with state change event updates for any new
execution environment being entered. This allows us to remove
conditionals in handling firmware load for PBL modes and keeps
the execution environment out of the picture as it can change at
any time.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617067704-28850-7-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
MHI power up can go through an EDL to Flash Programmer path when
the device has a blank NAND. In those cases, mhi_sync_power_up()
can timeout waiting for a mission mode execution environment.
Allow a successful power up instead by identifying Flash
Programmer as a valid mission mode execution environment with a
purpose to flash the device image contents.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1617067704-28850-6-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
MHI WWAN modems support downloading firmware to NAND or eMMC
using Firehose protocol with process as follows:
1. Modem boots up, enters AMSS execution environment and the
device later enters EDL (Emergency Download) mode through any
mechanism host can use such as a diag command.
2. Modem enters SYS_ERROR, MHI host handles SYS_ERROR transition.
3. EDL image for device to enter 'Flash Programmer' execution
environment is then flashed via BHI interface from host.
4. Modem enters MHI READY -> M0 and sends the Flash Programmer
execution environment change to host.
5. Following that, EDL/FIREHOSE channels (34, 35) are made
available from the host.
6. User space tool for downloading firmware image to modem over
the EDL channels using Firehose protocol. Link to USB flashing
tool: https://git.linaro.org/landing-teams/working/qualcomm/qdl.git/
Make the necessary changes to allow for this sequence to occur and
allow using the Flash Programmer execution environment.
Signed-off-by: Carl Yin <carl.yin@quectel.com>
Co-developed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617067704-28850-5-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Device entering EDL or Emergency Download Mode will be in a
SYS_ERROR MHI state. This requires MHI host to proceed with the
EDL image download over BHI before device can enter an MHI READY
state and proceed with further bootup. Allow this to be handled
by relying on the execution environment check after SYS_ERROR
processing to determine whether to wait for an MHI READY or
download the EDL image over BHI after moving MHI PM state to
Power on Reset internally. This way handling is contained well
within the MHI core driver and helps pave the way for Flash
Programmer execution environment functionality.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1617067704-28850-4-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Currently, the firmware load handler returns after the EDL image
is downloaded. Wait for an MHI READY transition instead as the
specification expects so as to proceed with further bootup such
as device entering Flash Programmer execution environment.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1617067704-28850-3-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Relying on the current execution environment to determine if EDL
image was downloaded should not be done as the execution
environment can change at this point in error cases and we may
misread it. Instead, MHI can rely on the local 'fw_name' variable
as a safer alternative.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1617067704-28850-2-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Put child node before return to fix potential reference count leak.
Generally, the reference count of child is incremented and decremented
automatically in the macro for_each_available_child_of_node() and should
be decremented manually if the loop is broken in loop body.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 335a12754808 ("bus: qcom: add EBI2 driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121114907.109267-1-bianpan2016@163.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Use kzalloc rather than kcalloc(1,...)
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
@@
- kcalloc(1,
+ kzalloc(
...)
// </smpl>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Eliminate the following coccicheck warning:
./drivers/bus/ti-sysc.c:1595:2-3: Unneeded semicolon
./drivers/bus/ti-sysc.c:2833:3-4: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Regression fixes for multiple issues found mostly caused by recent changes
to drop legacy platform data and and starting to use the new prm driver
reset controller:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
-----BEGIN PGP SIGNATURE-----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=sZVC
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.12/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.12-rc cycle
Regression fixes for multiple issues found mostly caused by recent changes
to drop legacy platform data and and starting to use the new prm driver
reset controller:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
* tag 'omap-for-v5.12/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva
bus: ti-sysc: Fix warning on unbind if reset is not deasserted
ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data
soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7
ARM: dts: am33xx: add aliases for mmc interfaces
bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
Link: https://lore.kernel.org/r/pull-1614868603-800959@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We cannot process a power_down if the power state is DISABLED. There is
no valid mhi_ctxt in that case, so attepting to process the power_down
will likely result in a null pointer dereference. If the power state is
DISABLED, there is nothing to do anyways, so just bail early.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1615409365-8165-1-git-send-email-jhugo@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Currently ENOMEM is returned when MHI ring is full. This error code is
very misleading. Change to EAGAIN instead.
Signed-off-by: Fan Wu <wufan@codeaurora.org>
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1615408803-7016-1-git-send-email-jhugo@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The variables state and ee are being initialized with values that
are never read and are being updated later with a new values. The
initializations are redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/20210311111727.8433-1-colin.king@canonical.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Let's warn if an old incomplete dtb is detected. We now assume the dtb
is complete and does not depend on the legacy platform data.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The check to see if we have reset the device after detecting syserr at
power_up is inverted. wait_for_event_timeout() returns 0 on failure,
and a positive value on success. The check is looking for non-zero
as a failure, which is likely to incorrectly cause a device init failure
if syserr was detected at power_up. Fix this.
Fixes: e18d4e9fa79b ("bus: mhi: core: Handle syserr during power_up")
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1613165243-23359-1-git-send-email-jhugo@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Update debug prints to include local device in the BHI interrupt
handler. This helps show transitions better between MHI states.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1614208985-20851-5-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In current design, whenever the BHI interrupt is fired, the
execution environment is updated. This can cause race conditions
and impede ongoing power up/down processing. For example, if a
power down is in progress, MHI host updates to a local "disabled"
execution environment. If a BHI interrupt fires later, that value
gets replaced with one from the BHI EE register. This impacts the
controller as it does not expect multiple RDDM execution
environment change status callbacks as an example. Another issue
would be that the device can enter mission mode and the execution
environment is updated, while device creation for SBL channels is
still going on due to slower PM state worker thread run, leading
to multiple attempts at opening the same channel.
Ensure that EE changes are handled only from appropriate places
and occur one after another and handle only PBL modes or RDDM EE
changes as critical events directly from the interrupt handler.
Simplify handling by waiting for SYS ERROR before handling RDDM.
This also makes sure that we use the correct execution environment
to notify the controller driver when the device resets to one of
the PBL execution environments.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1614208985-20851-4-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
During full boot chain firmware download, the PM state worker
downloads the AMSS image after a blocking wait for the SBL
execution environment change when running in PBL transition
itself. Improve this design by having the host download the AMSS
image from the SBL transition of PM state worker thread when a
DEV_ST_TRANSITION_SBL is queued instead of the blocking wait.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1614208985-20851-3-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Currently, client devices are created in SBL or AMSS (mission
mode) and only destroyed after power down or SYS ERROR. When
moving between certain execution environments, such as from SBL
to AMSS, no clean-up is required. This presents an issue where
SBL-specific channels are left open and client drivers now run in
an execution environment where they cannot operate. Fix this by
expanding the mhi_destroy_device() to do an execution environment
specific clean-up if one is requested. Close the gap and destroy
devices in such scenarios that allow SBL client drivers to clean
up once device enters mission mode.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1614208985-20851-2-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
MHI suspend/resume are symmetric and balanced procedures. If device is
not in M3 state on a resume, that means something happened behind our
back. In this case resume is aborted and error reported, to let the
controller handle the situation.
This is mainly requested for system wide suspend-resume operation in
PCI context which may lead to power-down/reset of the controller which
will then lose its MHI context. In such cases, PCI driver is supposed
to recover and reinitialize the device.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1614960841-20233-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
As per documentation, fields marked as (required) in an MHI
controller structure need to be populated by the controller driver
before calling mhi_register_controller(). Ensure all required
pointers and non-zero fields are present in the controller before
proceeding with the registration.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1615315490-36017-1-git-send-email-bbhatt@codeaurora.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Use MHI controller device name instead of the 'bus' device name as
debugfs dir name (e.g. /sys/kernel/debug/mhi0). That aligns with
sysfs device name.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Link: https://lore.kernel.org/r/1613403753-1457-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
mhi_queue returns an error when the doorbell is not accessible in
the current state. This can happen when the device is in non M0
state, like M3, and needs to be waken-up prior ringing the DB. This
case is managed earlier by triggering an asynchronous M3 exit via
controller resume/suspend callbacks, that in turn will cause M0
transition and DB update.
So, since it's not an error but just delaying of doorbell update, there
is no reason to return an error.
This also fixes a use after free error for skb case, indeed a caller
queuing skb will try to free the skb if the queueing fails, but in
that case queueing has been done.
Fixes: a8f75cb348fd ("mhi: core: Factorize mhi queuing")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1614336782-5809-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
A recent change created a dedicated workqueue for the state-change work
with WQ_HIGHPRI (no strong reason for that) and WQ_MEM_RECLAIM flags,
but the state-change work (mhi_pm_st_worker) does not guarantee forward
progress under memory pressure, and will even wait on various memory
allocations when e.g. creating devices, loading firmware, etc... The
work is then not part of a memory reclaim path...
Moreover, this causes a warning in check_flush_dependency() since we end
up in code that flushes a non-reclaim workqueue:
[ 40.969601] workqueue: WQ_MEM_RECLAIM mhi_hiprio_wq:mhi_pm_st_worker [mhi] is flushing !WQ_MEM_RECLAIM events_highpri:flush_backlog
[ 40.969612] WARNING: CPU: 4 PID: 158 at kernel/workqueue.c:2607 check_flush_dependency+0x11c/0x140
[ 40.969733] Call Trace:
[ 40.969740] __flush_work+0x97/0x1d0
[ 40.969745] ? wake_up_process+0x15/0x20
[ 40.969749] ? insert_work+0x70/0x80
[ 40.969750] ? __queue_work+0x14a/0x3e0
[ 40.969753] flush_work+0x10/0x20
[ 40.969756] rollback_registered_many+0x1c9/0x510
[ 40.969759] unregister_netdevice_queue+0x94/0x120
[ 40.969761] unregister_netdev+0x1d/0x30
[ 40.969765] mhi_net_remove+0x1a/0x40 [mhi_net]
[ 40.969770] mhi_driver_remove+0x124/0x250 [mhi]
[ 40.969776] device_release_driver_internal+0xf0/0x1d0
[ 40.969778] device_release_driver+0x12/0x20
[ 40.969782] bus_remove_device+0xe1/0x150
[ 40.969786] device_del+0x17b/0x3e0
[ 40.969791] mhi_destroy_device+0x9a/0x100 [mhi]
[ 40.969796] ? mhi_unmap_single_use_bb+0x50/0x50 [mhi]
[ 40.969799] device_for_each_child+0x5e/0xa0
[ 40.969804] mhi_pm_st_worker+0x921/0xf50 [mhi]
Fixes: 8f7039787687 ("bus: mhi: core: Move to using high priority workqueue")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1614161930-8513-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
When the device is idle it is possible to move it into the lowest MHI
PM state (M3). In that mode, all MHI operations are suspended and the
PCI device can be safely put into PCI D3 state.
The device is then resumed from D3/M3 either because of host initiated
MHI operation (e.g. buffer TX) or because the device (modem) has
triggered wake-up via PME feature (e.g. on incoming data).
Same procedures can be used for system wide or runtime suspend/resume.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1614971808-22156-6-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The PCI core can take care of proper PCI suspend/resume operations, but
this is discarded when the driver saves PCI state by its own. This
currently prevents the PCI core to enable PME (for modem initiated
D3 exit) which is requested for proper runtime pm support.
This change deletes explicit PCI state-saving and state-set from
suspend callback, letting the PCI doing the appropriate work.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1614971808-22156-5-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The wake_db register presence is highly speculative and can fuze MHI
devices. Indeed, currently the wake_db register address is defined at
entry 127 of the 'Channel doorbell array', thus writing to this address
is equivalent to ringing the doorbell for channel 127, causing trouble
with some devics (e.g. SDX24 based modems) that get an unexpected
channel 127 doorbell interrupt.
This change fixes that issue by setting wake get/put as no-op for
pci_generic devices. The wake device sideband mechanism seems really
specific to each device, and is AFAIK not defined by the MHI spec.
It also removes zeroing initialization of wake_db register during MMIO
initialization, the register being set via wake_get/put accessors few
cycles later during M0 transition.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1614971808-22156-4-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add generic info for SDX24 based modems. Also add the FIREHOSE channels
used by the flash-programmer firmware loaded in EDL mode.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1614971808-22156-3-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for EM1XXGR-L modems, this modem series is based on SDX24
qcom chip. The modem is mainly based on MBIM protocol for both the
data and control path. The drivers for these channels (mhi-net-mbim and
mhi_uci) are not yet part of the kernel but will be integrated by
different series.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1614971808-22156-2-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Not all hardwares need to use the same number of event ring elements.
This change makes this parametrable.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1614971808-22156-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Let's be nice and show an error on the SoCs about old imcomplete devicetree
if the dtb is still using "simple-bus" instead of "simple-pm-bus" for the
root OCP node.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We want to probe l4_wkup and l4_cfg interconnect devices first to avoid
issues with missing resources. Otherwise we attempt to probe l4_per
devices first causing pointless deferred probe and also annoyingh
renumbering of the MMC devices for example.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We have interconnect target modules with no known registers using only
clocks and resets, but we still want to detect them based on the module
IO range. So let's call sysc_parse_and_check_child_range() earlier so we
have module_pa properly initialized.
Fixes: 2928135c93f8 ("bus: ti-sysc: Support modules without control registers")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Here is the large set of char/misc/whatever driver subsystem updates for
5.12-rc1. Over time it seems like this tree is collecting more and more
tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86
maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only reported
issue being a merge conflict in include/linux/mod_devicetable.h that you
will hit in your tree due to the dfl_device_id addition from the fpga
subsystem in here. The resolution should be simple.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYDZf9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3xgCcCEN+pCJTum+uAzSNH3YKs/onaDgAnRSVwOUw
tNW6n1JhXLYl9f5JdhvS
=MOHs
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
SCMI firmware:
- add support for a completion interrupt
Reset controllers:
- new driver for BCM4908
- new devm_reset_control_get_optional_exclusive_released()
function
Memory controllers:
- Renesas RZ/G2 support
- Tegra124 interconnect support
- Allow more drivers to be loadable modules
TEE/optee firmware:
- minor code cleanup
The other half of this is SoC specific drivers that do not
belong into any other subsystem, most of them living in
drivers/soc:
- Allwinner/sunxi power management work
- Allwinner H616 support
- ASpeed AST2600 system identification support
- AT91 SAMA7G5 SoC ID driver
- AT91 SoC driver cleanups
- Broadcom BCM4908 power management bus support
- Marvell mbus cleanups
- Mediatek MT8167 power domain support
- Qualcomm socinfo driver support for PMIC
- Qualcomm SoC identification for many more products
- TI Keystone driver cleanups for PRUSS and elsewhere
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=I2Zn
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
SCMI firmware:
- add support for a completion interrupt
Reset controllers:
- new driver for BCM4908
- new devm_reset_control_get_optional_exclusive_released() function
Memory controllers:
- Renesas RZ/G2 support
- Tegra124 interconnect support
- Allow more drivers to be loadable modules
TEE/optee firmware:
- minor code cleanup
The other half of this is SoC specific drivers that do not belong into
any other subsystem, most of them living in drivers/soc:
- Allwinner/sunxi power management work
- Allwinner H616 support
- ASpeed AST2600 system identification support
- AT91 SAMA7G5 SoC ID driver
- AT91 SoC driver cleanups
- Broadcom BCM4908 power management bus support
- Marvell mbus cleanups
- Mediatek MT8167 power domain support
- Qualcomm socinfo driver support for PMIC
- Qualcomm SoC identification for many more products
- TI Keystone driver cleanups for PRUSS and elsewhere"
* tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits)
soc: aspeed: socinfo: Add new systems
soc: aspeed: snoop: Add clock control logic
memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
memory: samsung: exynos5422-dmc: Correct function names in kerneldoc
memory: ti-emif-pm: Drop of_match_ptr from of_device_id table
optee: simplify i2c access
drivers: soc: atmel: fix type for same7
tee: optee: remove need_resched() before cond_resched()
soc: qcom: ocmem: don't return NULL in of_get_ocmem
optee: sync OP-TEE headers
tee: optee: fix 'physical' typos
drivers: optee: use flexible-array member instead of zero-length array
tee: fix some comment typos in header files
soc: ti: k3-ringacc: Use of_device_get_match_data()
soc: ti: pruss: Refactor the CFG sub-module init
soc: mediatek: pm-domains: Don't print an error if child domain is deferred
soc: mediatek: pm-domains: Add domain regulator supply
dt-bindings: power: Add domain regulator supply
soc: mediatek: cmdq: Remove cmdq_pkt_flush()
soc: mediatek: pm-domains: Add support for mt8167
...
There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use [1], and
received confirmation about six ARM platforms and the TI C6x architecture
that have all reached the end of their life upstream, with no known
users remaining:
- efm32 -- added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell -- added in 2011, abandoned after 2012 acquisition
- prima2 -- added in 20111, no notable changes since 2015
- tango -- added in 2015, sporadic changes until 2017, but abandoned
- u300 -- added in 2009, no notable changes since 2013
- zx --added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x -- added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users
that plan to contribute them in the future, in other cases the code
is complete and works reliably.
[1] https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=pf3b
-----END PGP SIGNATURE-----
Merge tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform removals from Arnd Bergmann:
"There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use, and
received confirmation about six ARM platforms and the TI C6x
architecture that have all reached the end of their life upstream,
with no known users remaining:
- efm32 - added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell - added in 2011, abandoned after 2012 acquisition
- prima2 - added in 20111, no notable changes since 2015
- tango - added in 2015, sporadic changes until 2017, but abandoned
- u300 - added in 2009, no notable changes since 2013
- zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x - added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users that
plan to contribute them in the future, in other cases the code is
complete and works reliably"
Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: remove u300 platform
ARM: remove tango platform
ARM: remove zte zx platform
ARM: remove sirf prima2/atlas platforms
c6x: remove architecture
MAINTAINERS: Remove deleted platform efm32
ARM: drop efm32 platform
ARM: Remove PicoXcell platform support
ARM: dts: Remove PicoXcell platforms
We currently get thefollowing on driver unbind if a reset is configured
and asserted:
WARNING: CPU: 0 PID: 993 at drivers/reset/core.c:432 reset_control_assert
...
(reset_control_assert) from [<c0fecda8>] (sysc_remove+0x190/0x1e4)
(sysc_remove) from [<c0a2bb58>] (platform_remove+0x24/0x3c)
(platform_remove) from [<c0a292fc>] (__device_release_driver+0x154/0x214)
(__device_release_driver) from [<c0a2a210>] (device_driver_detach+0x3c/0x8c)
(device_driver_detach) from [<c0a27d64>] (unbind_store+0x60/0xd4)
(unbind_store) from [<c0546bec>] (kernfs_fop_write_iter+0x10c/0x1cc)
Let's fix it by checking the reset status.
Signed-off-by: Tony Lindgren <tony@atomide.com>
mhi_deinit_chan_ctxt functionthat takes care of unitializing channel
resources, including unmapping coherent MHI areas, can be called
from different path in case of controller unregistering/removal:
- From a client driver remove callback, via mhi_unprepare_channel
- From mhi_driver_remove that unitialize all channels
mhi_driver_remove()
|-> driver->remove()
| |-> mhi_unprepare_channel()
| |-> mhi_deinit_chan_ctxt()
|...
|-> mhi_deinit_chan_ctxt()
This leads to double dma freeing...
Fix that by preventing deinit for already uninitialized channel.
Link: https://lore.kernel.org/r/1612894264-15956-1-git-send-email-loic.poulain@linaro.org
Fixes: a7f422f2f89e ("bus: mhi: Fix channel close issue on driver remove")
Reported-by: Kalle Valo <kvalo@codeaurora.org>
Tested-by: Kalle Valo <kvalo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210210082538.2494-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add some new MC firmware commands that can be received through the
userspace ioctl interface - *get_max_frame_length and *_get_counter.
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210208170949.3070898-4-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new object type was recently added in MC. This has to be added in the
fsl-mc bus device type list so that it can be properly listed.
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210208170949.3070898-3-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "desc" pointer can't possibly be NULL here. If we can't find the
correct "desc" then tt points to the last element of the
fsl_mc_accepted_cmds[] array. Fix this by testing if
"i == FSL_MC_NUM_ACCEPTED_CMDS" instead.
Fixes: 2cf1e703f066 ("bus: fsl-mc: add fsl-mc userspace support")
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210208170949.3070898-2-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loic improved the MHI PCI generic controller by adding support for DIAG channel,
PCI error handling, suspend/recovery/resume, and health check. Loic also added
support for resetting the MHI device as per the MHI specification. This includes
writing to a specific register for default cases and looking for controller
specific callback when provided.
Along with this Loic, also added a new API which gets the number for free TREs
(Transfer Ring Elements) from the MHI core. The client drivers can make use of
this API and the current consumer is the "mhi-net" driver. For taking both the
"mhi-net" driver change and the API change, we created "mhi-net-immutable"
branch for this patch and merged the same into net-next and mhi-next.
Carl added a patch which lets the controller driver to pass the custom IRQ
flags for BHI and MHI event interrupts to the MHI core. The current consumer of
this feature is the ath11k MHI controller driver. For taking both the changes,
we created "mhi-ath11k-immutable" branch for this patch and merged into
ath11k-next and mhi-next.
Finally, Loic cleaned up the MHI queue APIs and fixed the shared MSI vector
support.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmAdQIMACgkQVZ8R5v6R
zvWtsQgApNckrY1W+CAOi/CkYrwvO7ADNw+nZIEu1FkhnDo5qCTwDYfNogf3K9lq
LbtuQLaBBE4ilvrB+o4ubLYBaRN0Bt4B+ImShvPmJw6/HDuuzW2AmdDn66bMMRHz
wZ0cXgisnrJn8tSIZUfx05wyxT6AV+A4f0cZv/FzU0rzIgrHsJVdDtrGcxOnoK2w
tbUoGuIwCIN8uJp+XXpBufujKz6S+2GSHKP6ELdNhoNhgag7u+fau5IUZVewTkSM
ayAYwlzHOR5TCnI+/clOEh7RHodORZ0xvsj5IqEuaFz0PwF/fT/37LMWfNP3Cc11
FjM/ZU++gKh6aa/PEJlGTxSlqVK+NQ==
=tdTN
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI changes for v5.12
Loic improved the MHI PCI generic controller by adding support for DIAG channel,
PCI error handling, suspend/recovery/resume, and health check. Loic also added
support for resetting the MHI device as per the MHI specification. This includes
writing to a specific register for default cases and looking for controller
specific callback when provided.
Along with this Loic, also added a new API which gets the number for free TREs
(Transfer Ring Elements) from the MHI core. The client drivers can make use of
this API and the current consumer is the "mhi-net" driver. For taking both the
"mhi-net" driver change and the API change, we created "mhi-net-immutable"
branch for this patch and merged the same into net-next and mhi-next.
Carl added a patch which lets the controller driver to pass the custom IRQ
flags for BHI and MHI event interrupts to the MHI core. The current consumer of
this feature is the ath11k MHI controller driver. For taking both the changes,
we created "mhi-ath11k-immutable" branch for this patch and merged into
ath11k-next and mhi-next.
Finally, Loic cleaned up the MHI queue APIs and fixed the shared MSI vector
support.
* tag 'mhi-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: pci_generic: Increase num of elements in hw event ring
mhi: pci_generic: Print warning in case of firmware crash
bus: mhi: core: Add helper API to return number of free TREs
mhi: core: Factorize mhi queuing
mhi: use irq_flags if controller driver configures it
mhi: pci_generic: Fix shared MSI vector support
mhi: unconstify mhi_event_config
bus: mhi: Ensure correct ring update ordering with memory barrier
mhi: pci_generic: Set irq moderation value to 1ms for hw channels
mhi: pci_generic: Add diag channels
mhi: pci_generic: Increase controller timeout value
mhi: pci_generic: Add health-check
mhi: pci_generic: Add PCI error handlers
mhi: pci_generic: Add suspend/resume/recovery procedure
mhi: pci_generic: Add support for reset
mhi: pci_generic: Enable burst mode for hardware channels
mhi: pci-generic: Increase number of hardware events
bus: mhi: core: Add device hardware reset support
We met some sporadic modem crashes during high throughput testing, this
has been root caused to a lack of elements in the event ring. Indeed,
the modem is simply crashing when event ring becomes empty.
It appears that the total number event ring elements is too low given
the performances of the modem (IPA hardware accelerator). This change
increases the number of elements in the hardware event ring to 2048,
which is aligned with what is defined in downstream version:
https://source.codeaurora.org/quic/la/kernel/msm-4.14/tree/arch/arm64/boot/dts/qcom/sm8150-mhi.dtsi?h=msm-4.14#n482
With this change, modem coes not crash anymore.
Note: An event ring element is 16-Byte, so the total memory usage of
a hardware event ring is now 32KB.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1612514195-8257-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
