- A series from Fabio Estevam to fix dt-schema warnings on i.MX23,
i.MX28 and i.MX27 device trees
- A bunch of changes from Krzysztof Kozlowski that corrects TQ Systems
DTS patterns in MAINTAINERS file and fix various dt-schema warnings
- A couple changes from Liu Ying to improve HDMI support on i.MX53 QSB
board
- A series from Lukasz Majewski to update imx28-lwe device tree, fixing
partition definitions, reducing SPI frequency and cleaning up SAIF
- A series from Markus Niebel to improve TQ-Systems device trees, adding
iio-hwmon device, using better compatible for LM75 temp sensor, moving
I2C3 pinmux to a better place
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmbYVjoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7oPgf9FKYcNHDzVh4X2NFyPvqYJiJrq6tT
8Po/UvgymzF6DkYMw7vDWthYCiH9PUpjk3nP7kv+xSDq4YOfkHshVYbOwqBACeSb
XtP5vS9RIVGU6G2ZhQ+lYM3d9Uc3hCRBCRBuCzUg8p7msp0a0gIYQbEOL3bBfBcr
KwhOM8nF+LJ4/4L3MUjQPEJRmoHsFMSZXGvVEpFiHNKwh8qByW9j/cPNey1aIMpe
GY+/J71qyvEy/lXS081gdec+VM8Y3GpoDPq8EIOri2xqms1fwihIiAcpUNngR8PN
REXzRbk0uT9MUwPE794qZxqCb+W1etVUHVhdfxN29CjWW7CYf3yhB6ePrg==
=fPHr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QOO+
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.12:
- A series from Fabio Estevam to fix dt-schema warnings on i.MX23,
i.MX28 and i.MX27 device trees
- A bunch of changes from Krzysztof Kozlowski that corrects TQ Systems
DTS patterns in MAINTAINERS file and fix various dt-schema warnings
- A couple changes from Liu Ying to improve HDMI support on i.MX53 QSB
board
- A series from Lukasz Majewski to update imx28-lwe device tree, fixing
partition definitions, reducing SPI frequency and cleaning up SAIF
- A series from Markus Niebel to improve TQ-Systems device trees, adding
iio-hwmon device, using better compatible for LM75 temp sensor, moving
I2C3 pinmux to a better place
* tag 'imx-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (27 commits)
ARM: dts: imx28-lwe: Remove saif[01] definitions
ARM: dts: imx28-lwe: Reduce maximal SPI frequency
ARM: dts: imx28-lwe: Fix partitions definitions
ARM: dts: imx6qdl: align pin config nodes with bindings
ARM: dts: imx6sl: align pin config nodes with bindings
ARM: dts: imx6ul: align pin config nodes with bindings
ARM: dts: imx6ul-tx6ul: drop empty pinctrl placeholder
ARM: dts: imx28-tx28: Fix the fsl,saif-master usage
ARM: dts: imx6ull-seeed-npi: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx6ul-geam: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx23/8: Rename apbh and apbx nodes
ARM: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmux
ARM: dts: imx6qdl-mba6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6b
ARM: dts: imx7d-sdb: align pin config nodes with bindings
ARM: dts: imx7: align pin config nodes with bindings
ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl property
MAINTAINERS: correct TQ Systems DTS patterns
ARM: dts: imx6: update spdif sound card node properties
...
Link: https://lore.kernel.org/r/20240904143439.211552-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- One cleanup from Fabio Estevam to remove Ethernet refclock setting
from i.MX6SX machine code
- One change from Nathan Chancellor that annotates imx7d_enet_init() as
__init to clears up a section mismatch seen with the recent LLVM
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmbYRz0UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4JzQgAt5DItWMG+lOgAdxkuVpydzgJ4i3i
x1cxOWxzV+8//JVZoFVNFYtZJlaJ4lnA0zjI/in+rz5r/vz6GOVlsSIUzVn+ayxg
MBjqvMuPcggZR+dC7ckUHdEXUB1DIbcBTtP/8IqkjXFXz6euej6gDcheU+QX/4PY
yTGiCj6dXC2AzSYo0SUwVGbkgKOqqyFP2dkgAQ+SgmhbXX3FyMOc1OgoQjVXj+Y0
FSRe6xjj6Xn7BmUPLbebws0jG8jy7tVKaVcquPnvF1NUZLFT1UzdwDENu9raKobQ
LbkM0XxuU66pNYPDvH3HhOESzt5l6Yt+t8v1oNRJQ6H6EQkVA3cui9uRbw==
=8UNt
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=09E6
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/arm
i.MX SoC changes for 6.12:
- One cleanup from Fabio Estevam to remove Ethernet refclock setting
from i.MX6SX machine code
- One change from Nathan Chancellor that annotates imx7d_enet_init() as
__init to clears up a section mismatch seen with the recent LLVM
* tag 'imx-soc-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Annotate imx7d_enet_init() as __init
ARM: mach-imx: imx6sx: Remove Ethernet refclock setting
Link: https://lore.kernel.org/r/20240904143439.211552-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
By default the SGTL5000 derives bit and frame clock from MCLK, which
does not produce particularly accurate results. The SGTL5000 PLL does
improve the accuracy, but also increases power consumption. Using the
SoC SAI interface as bit and frame clock source results in the best
accuracy without the power consumption increase downside. Switch the
bit and frame clock direction from SAI to SGTL5000, reduce mclk-fs to
match.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Switch the bitclock-master and frame-master properties from phandle to
flag on STM32MP15xx DHCOM PDK2. There is no real reason to use phandle
in this system DT, since the phandle points to the endpoint node which
contains the property itself. Simplify the DT. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Introduce device tree support for the MECIO1 and MECT1S board variants.
MECIO1 is an I/O and motor control board used in blood sample analysis
machines. MECT1S is a 1000Base-T1 switch for internal machine networks
of blood sample analysis machines.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the
subnode name. The incorrect name caused the configuration to be
applied to the wrong subnode, resulting in QSPI not working properly.
Some additional changes was made:
- To avoid this kind of regression, all references to pin configuration
nodes are now referenced directly using the format &{label/subnode}.
- /delete-property/ bias-disable; was added everywhere where bias-pull-up
is used
- redundant properties like driver-push-pull are removed
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The RTL8211 PHY on DH STM32MP13xx DHCOR DHSBC carrier board supports HW
LED offload, the LEDs can be configured on link at 10/100/1000 line rate
and on RXTX activity. There are two PHYs on this board, each only has two
out of three LEDs connected to the PHY LED outputs. Describe this hardware
configuration in DT.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This enables DDR50 mode for the eMMC on Octavo OSD32MP1-RED board.
Fixes: be78ab4f63 ("ARM: dts: stm32: add initial support for stm32mp157-odyssey board")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Describe ethernet MAC address nvmem cells in DH STM32MP13xx DHCOR DHSBC
board DT. The MAC address can be fused in BSEC OTP fuses and used to set
up MAC address for both ethernet MACs on this board.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The RTL8211F PHY clock output is not used on DH STM32MP13xx DHCOR DHSBC
board, disable it to improve EMI characteristics.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The RTL8211F PHY gets confused when the MDIO bus lines get switched
to ANALOG during suspend/resume cycle. Keep the MDIO and MDC lines
in AF during suspend/resume to avoid confusing the PHY. The PHY can
be brought out of the confused state by restarting auto-negotiation
too, but that seems like an odd workaround and shouldn't be in the
PHY driver.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
- Fix a build issue with older binutils with LD dead code elimination
disabled
-----BEGIN PGP SIGNATURE-----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=fJoT
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM fix from Russell King:
- Fix a build issue with older binutils with LD dead code elimination
disabled
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9414/1: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION
Since arm_iommu_create_mapping() now accepts the device, let's replace
iommu_domain_alloc() with iommu_paging_domain_alloc() to retire the former.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
All users of ARM IOMMU mappings create them for a particular device, so
change the interface to accept the device rather than forcing a vague
indirection through a bus type. This prepares for making a similar
change to iommu_domain_alloc() itself.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
There is a build issue with LD segmentation fault, while
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled, as bellow.
scripts/link-vmlinux.sh: line 49: 3796 Segmentation fault
(core dumped) ${ld} ${ldflags} -o ${output} ${wl}--whole-archive
${objs} ${wl}--no-whole-archive ${wl}--start-group
${libs} ${wl}--end-group ${kallsymso} ${btf_vmlinux_bin_o} ${ldlibs}
The error occurs in older versions of the GNU ld with version earlier
than 2.36. It makes most sense to have a minimum LD version as
a dependency for HAVE_LD_DEAD_CODE_DATA_ELIMINATION and eliminate
the impact of ".reloc .text, R_ARM_NONE, ." when
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled.
Fixes: ed0f941022 ("ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION")
Reported-by: Harith George <mail2hgg@gmail.com>
Tested-by: Harith George <mail2hgg@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://lore.kernel.org/all/14e9aefb-88d1-4eee-8288-ef15d4a9b059@gmail.com/
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
DMA ops are a helper for architectures and not for drivers to override
the DMA implementation.
Unfortunately driver authors keep ignoring this. Make the fact more
clear by renaming the symbol to ARCH_HAS_DMA_OPS and having the two drivers
overriding their dma_ops depend on that. These drivers should probably be
marked broken, but we can give them a bit of a grace period for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # for IPU6
Acked-by: Robin Murphy <robin.murphy@arm.com>
VPU for video decoding and the rk3128 sfc node can use the clock constant
now after the merge-window.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmbU3yIQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcuBB/kBeNnJ266UlyAR4WHeG1Nx+vnf9iiMU8oi
x/effnB/zuO042YCGOCer5uOp2Z9/ZFkyOi/mQi5OnuotU/XHhVGCBCtt5ZBaczN
+e/Yhnq/b+mu9KgaKjZo3JNTtUcZ7xqhJPk7Tu8RiR7WucxtpAJ8IU7n64oxuxep
CjsULPLaU3DSRb8V1e0T0+CKLrfrM/ElNZjHPc2UDZUCd+nUp6dsilup65qQZAcQ
ADPbOsL5UcxJyDubIP67wLMS6V6UcnKDdZpR0z2+wxIBPZZ6VVHyGMj2MhnEZhKD
CxZb6Mg6pW1Ki/scZoAnWcK1ABsdPmUUwZ0csvfPD21Cbt7Ytw7b
=3S7y
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=d6TH
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rockchip-dts32-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
spidev on the elgin-r1 got a real compatible, the rk3128 could enable its
VPU for video decoding and the rk3128 sfc node can use the clock constant
now after the merge-window.
* tag 'v6.12-rockchip-dts32-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Do not describe unexisting DAC device on rv1108-elgin-r1
ARM: dts: rockchip: Add vpu nodes for RK3128
ARM: dts: rockchip: use constant for HCLK_SFC on rk3128
Link: https://lore.kernel.org/r/3405397.RL5eaSpR8r@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It contains:
- SAMA7G5-EK DTS was updated with EEPROM nodes containing Ethernet
addresses (needed, at least, when U-Boot is removed from the booting
chain)
- 5V supplies were added to to MCP16502 PMIC nodes for better hardware
description
- cleanups around pinctrl nodes which removed many dtbs_check warnings;
along with it the pinctrl documentation was converted to json schema
- fixes for the RTC and RTT supply clocks on SAMA7G5 and SAM9X60
- other cleanups to fix dtbs_check warnings
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZtMgmgAKCRCejrg/N2X7
/YHUAP9q4iY9zv4V2bY8jsxzQCNZpAs1E+vRBJWRhzlh6YpTFgD+NVM7eYP2qAe9
lNjE76KaXzuKWUA11mVfCrjhzi7ocgs=
=RQ5+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=IOnx
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.12
It contains:
- SAMA7G5-EK DTS was updated with EEPROM nodes containing Ethernet
addresses (needed, at least, when U-Boot is removed from the booting
chain)
- 5V supplies were added to to MCP16502 PMIC nodes for better hardware
description
- cleanups around pinctrl nodes which removed many dtbs_check warnings;
along with it the pinctrl documentation was converted to json schema
- fixes for the RTC and RTT supply clocks on SAMA7G5 and SAM9X60
- other cleanups to fix dtbs_check warnings
* tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: Fix RTT clock
ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks
dt-bindings: pinctrl: Convert Atmel PIO3 pinctrl to json-schema
ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node
ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes
ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux controller
ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91: align LED node name with bindings
ARM: dts: microchip: sam9x60: Move i2c address/size to dtsi
ARM: dts: microchip: at91-sama7g5ek: add EEPROMs
Link: https://lore.kernel.org/r/20240901133110.2038675-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These patches add a bunch more features for the TF701T board and wire up
the front panel LEDs on TrimSlice.
-----BEGIN PGP SIGNATURE-----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=jQ+r
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=scyt
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.12-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.12-rc1
These patches add a bunch more features for the TF701T board and wire up
the front panel LEDs on TrimSlice.
* tag 'tegra-for-6.12-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Wire up two front panel LEDs on TrimSlice
ARM: tegra: tf701t: Configure USB
ARM: tegra: tf701t: Use dedicated backlight regulator
ARM: tegra: tf701t: Re-group GPIO keys
ARM: tegra: tf701t: Bind WIFI SDIO and EMMC
ARM: tegra: tf701t: Complete sound bindings
ARM: tegra: tf701t: Adjust sensors nodes
ARM: tegra: tf701t: Add Bluetooth node
ARM: tegra: tf701t: Add HDMI bindings
ARM: tegra: tf701t: Correct and complete PMIC and PMC bindings
ARM: tegra: tf701t: Bind VDE device
ARM: tegra: tf701t: Use unimomentary pinmux setup
Link: https://lore.kernel.org/r/20240830141004.3195210-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable support for AK4619 codecs and Renesas R-Car Ethernet-TSN
controllers in the ARM64 defconfig,
- Enable slab hardening and kmalloc buckets in the Renesas ARM
defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZsbubAAKCRCKwlD9ZEnx
cOaHAQCizOEU5damvBCBzcAaKbSGKc+psBUJogJ/ic19I5B4NAD/aOihRr4iCJZe
MckRf7P2BebH75TbwTstZMscRkkGAAU=
=Wr7F
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VxDt
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v6.12-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.12
- Enable support for AK4619 codecs and Renesas R-Car Ethernet-TSN
controllers in the ARM64 defconfig,
- Enable slab hardening and kmalloc buckets in the Renesas ARM
defconfig.
* tag 'renesas-arm-defconfig-for-v6.12-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R-Car Ethernet-TSN support
ARM: shmobile: defconfig: Enable slab hardening and kmalloc buckets
arm64: defconfig: Enable AK4619 codec support
Link: https://lore.kernel.org/r/cover.1724316480.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The saif[01] nodes are specific to other group of the imx287
based devices, so need to be moved to different devices description file.
Leaving them here causes issues with next revision of XEA device.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Due to some operational problems (HW) the maximal speed of the SPI
frequency for flash memory has been reduced by half.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SPI-NOR memory layout has evolved during time lifetime of the
device - for example special partitions to keep track of booted devices
for A/B booting scheme were added.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings for other NXP pin controllers expect pin configuration nodes in
pinctrl to match certain naming, so adjust these as well, even though
their bindings are not yet in dtschema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings for other NXP pin controllers expect pin configuration nodes in
pinctrl to match certain naming, so adjust these as well, even though
their bindings are not yet in dtschema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming:
imx6ul-kontron-bl.dtb: pinctrl@20e0000: 'usbotg1' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Drop an empty pin configuration node placeholder, because bindings
require 'fsl,pins' property:
imx6ul-tx6ul-0010.dtb: pinctrl@20e0000: hoggrp: 'fsl,pins' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to fsl,saif.yaml, fsl,saif-master is a phandle to the master
SAIF.
Change it accordingly, to fix the following dt-schema warnings:
saif@80042000: fsl,saif-master: True is not of type 'array'
saif@80042000: Unevaluated properties are not allowed ('fsl,saif-master' was unexpected)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pins' is a required property
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org
Fixes: e3b5697195 ("ARM: dts: imx6ull: add seeed studio NPi dev board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Parthiban Nallathambi <parthiban@linumiz.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pins' is a required property
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org
Fixes: a58e4e608b ("ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to simple-bus.yaml, apbh and apbx are not valid bus names.
Rename them to apbh-bus and apbx-bus to fix the following dt-schema
warnings:
'apbh@80000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
'apbx@80040000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Kernel now supports chained power-off handlers. Use
register_platform_power_off() that registers a platform level power-off
handler. Legacy pm_power_off() will be removed once all drivers and archs
are converted to the new sys-off API.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
For each memory region the first 10K are reserved for DDR training. Emit
a warning if the area happens to be smaller than these 10K. This should
not happen, but if it does this message simplifies diagnosing the
problem.
This fixes a W=1 compiler error:
arch/arm/mach-mvebu/board-v7.c: In function ‘mvebu_scan_mem’:
arch/arm/mach-mvebu/board-v7.c:84:27: error: variable ‘size’ set but not used [-Werror=unused-but-set-variable]
84 | u64 base, size;
| ^~~~
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Besides the fact that (old) drivers use wrong definitions, e.g.,
GPIOF_DIR_IN instead of GPIOF_IN, shrink the legacy definitions
by killing those GPIOF_DIR_* completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20240828142554.2424189-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Besides the fact that (old) drivers use wrong definitions, e.g.,
GPIOF_INIT_HIGH instead of GPIOF_OUT_INIT_HIGH, shrink the legacy
definitions by killing those GPIOF_INIT_* completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20240828142554.2424189-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Patch series "treewide: add missing MODULE_DESCRIPTION() macros".
Since commit 1fffe7a34c ("script: modpost: emit a warning when the
description is missing"), a module without a MODULE_DESCRIPTION() will
result in a warning when built with make W=1.
Recently, multiple developers have been eradicating these warnings
treewide, and I personally submitted almost 300 patches over the past few
months. Almost all of my patches landed by 6.11-rc1, either by being
merged in a 6.10-rc or by being merged in the 6.11 merge window. However,
a few of my patches did not land.
This patch (of 5):
With ARCH=arm and CONFIG_KERNEL_MODE_NEON=y, make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/arm/lib/xor-neon.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Link: https://lkml.kernel.org/r/20240730-module_description_orphans-v1-0-7094088076c8@quicinc.com
Link: https://lkml.kernel.org/r/20240730-module_description_orphans-v1-1-7094088076c8@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Alistar Popple <alistair@popple.id.au>
Cc: Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eddie James <eajames@linux.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nouveau <nouveau@lists.freedesktop.org>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: split PTE/PMD PT table Kconfig cleanups+clarifications".
This series is a follow up to the fixes:
"[PATCH v1 0/2] mm/hugetlb: fix hugetlb vs. core-mm PT locking"
When working on the fixes, I wondered why 8xx is fine (-> never uses split
PT locks) and how PT locking even works properly with PMD page table
sharing (-> always requires split PMD PT locks).
Let's improve the split PT lock detection, make hugetlb properly depend on
it and make 8xx bail out if it would ever get enabled by accident.
As an alternative to patch #3 we could extend the Kconfig
SPLIT_PTE_PTLOCKS option from patch #2 -- but enforcing it closer to the
code that actually implements it feels a bit nicer for documentation
purposes, and there is no need to actually disable it because it should
always be disabled (!SMP).
Did a bunch of cross-compilations to make sure that split PTE/PMD PT locks
are still getting used where we would expect them.
[1] https://lkml.kernel.org/r/20240725183955.2268884-1-david@redhat.com
This patch (of 3):
Let's clean that up a bit and prepare for depending on
CONFIG_SPLIT_PMD_PTLOCKS in other Kconfig options.
More cleanups would be reasonable (like the arch-specific "depends on" for
CONFIG_SPLIT_PTE_PTLOCKS), but we'll leave that for another day.
Link: https://lkml.kernel.org/r/20240726150728.3159964-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240726150728.3159964-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since the muxing is described already in imx6qdl-tqma6 can be reused
by this variant. No functional change.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use national,lm75a to specify exact variant used. This should cause
no functional changes.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use national,lm75a to specify exact variant used. This should cause
no functional changes.
While at it change node name to 'temperature-sensor@48' to
describe the function of the IC.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move the pinmux entries to the variant where they are actual
used. No functional changes.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
imx7d-sdb-sht11.dtb: pinctrl@30330000: 'imx7d-sdb' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the "imx7d-sdb" wrapping node and adjust the names to have "grp"
prefix. Diff looks big but this should have no functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming:
imx7s-colibri-eval-v3.dtb: pinctrl@30330000: 'lvdstx' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
imx7s-warp.dtb: pinctrl@30330000: 'usdhc3grp_100mhz', 'usdhc3grp_200mhz' do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is no "fsl,phy" property in pin controller pincfg nodes:
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,pins' is a required property
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,phy' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: f496e67500 ("ARM: dts: Add ZII support for ZII i.MX7 RMU2 board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
After a recent LLVM change [1] that deduces __cold on functions that
only call cold code (such as __init functions), there is a section
mismatch warning from imx7d_enet_init(), which got moved to
.text.unlikely. as a result of that optimization:
WARNING: modpost: vmlinux: section mismatch in reference: imx7d_enet_init+0x20 (section: .text.unlikely.) -> imx7d_enet_clk_sel (section: .init.text)
Drop the inline keyword (which does not guarantee inlining) and replace
it with __init, as imx7d_enet_init() is only called from __init code,
which clears up the warning.
Link: 6b11573b8c [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The merge of imx-spdif driver into fsl-asoc-card brought
new DT properties that can be used with the "fsl,imx-audio-spdif"
compatible:
* The "spdif-controller" property from imx-spdif is named "audio-cpu"
in fsl-asoc-card.
* fsl-asoc-card uses codecs explicitly declared in DT
with "audio-codec".
With an S/PDIF, codec drivers spdif_transmitter and
spdif_receiver should be used.
Driver imx-spdif used instead the dummy codec and a pair of
boolean properties, "spdif-in" and "spdif-out".
While backward compatibility is kept to support properties
"spdif-controller", "spdif-in" and "spdif-out", using new properties has
several benefits:
* "audio-cpu" and "audio-codec" are more generic names reflecting
that the fsl-asoc-card driver supports multiple hardware.
They are properties already used by devices using the
fsl-asoc-card driver.
They are also similar to properties of simple-card: "cpu" and "codec".
* "spdif-in" and "spdif-out" imply the use of the dummy codec in the
driver. However, there are already two codec drivers for the S/PDIF,
spdif_transmitter and spdif_receiver.
It is better to declare S/PDIF Tx and Rx devices in a DT, and then
reference them with "audio-codec" than using the dummy codec.
For those reasons, this commit updates in-tree DTs to use the new
properties:
* Rename "spdif-controller" property to "audio-cpu".
* Declare S/PDIF transmitter and/or receiver devices, and use them with
the "audio-codec" property instead of "spdif-out" and/or "spdif-in".
These modifications were tested only on an imx8mn-evk board.
Note that out-of-tree and old DTs are still supported.
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The regulator should not be placed under simple-bus.
Remove it from simple-bus to fix the following dt-schema warnings:
'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
regulators: #size-cells:0:0: 0 is not one of [1, 2]
regulators: regulator@0:reg:0: [0] is too short
regulators: 'ranges' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to datasheet, Chapter 34. Clock Generator, section 34.2,
Embedded characteristics, source clock for RTT is the TD_SLCK, registered
with ID 1 by the slow clock controller driver. Fix RTT clock.
Fixes: 7540629e2f ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Link: https://lore.kernel.org/r/20240826165320.3068359-1-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
arm64 will soon require its own callback to initialise services
that are only available on this architecture. Introduce a hook
that can be overloaded by the architecture.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-2-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
LPC32XX connects few of its peripherals to pl08x DMA thru a multiplexer,
this driver allows to route a signal request line thru the multiplexer for
given peripheral.
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Link: https://lore.kernel.org/r/20240628152022.274405-1-piotr.wojtaszczyk@timesys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pins responsible for controlling these LEDs need to have tristate
control removed if we want them as GPIOs. This change aligns with
pinmux configuration of "dte" pin group in downstream kernel[1].
These LEDs had no function assigned on vendor kernel and there is no
label on the case, the only markings are on PCB which are part of node
names (ds1 marking is on power LED controlled by PMIC), so generic term
is assigned as the function.
1. https://github.com/compulab/trimslice-android-kernel/blob/upstream/arch/arm/mach-tegra/board-trimslice-pinmux.c#L45
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fixes issue when resuming after suspend made USB in peripheral
mode inaccessible.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Downstream kernel states that backlight has no actual enable GPIO
and uses fixed regulator.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add MMC nodes configuration along with WIFI binding to ASUS TF701T
device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
With these changes sound works, only UCM configs are needed for
complete support.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Complete and adjust magnetometer, thermal sensor, motion tracker,
power and light sensors according to available sources.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add serial node along with bluetooth node to ASUS TF701T device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Mimic original downstream board behavior to set up all pinmux at once.
Per-device pinmux is good but we have no complete board schematics
to allow such luxury.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
- One imx8mp-beacon-kit change from Adam Ford to fix the broken WM8962
audio support
- One pinctrl property typo fix for imx8mm-phygate
- One layerscape fix from Krzysztof Kozlowski to get thermal nodes
correct name length
- A couple of imx93-tqma9352 fixes from Markus Niebel, one on CMA
alloc-ranges and the other on SD-Card cd-gpios typo
- One change from Michal Vokáč to fix imx6dl-yapp43 LED current to match
the HW design
- A couple of imx95 fixes from Peng Fan, one to correct a55 power
domains and the other to correct L3Cache cache-sets
- One tqma9352 watchdog reset fix from Sascha Hauer
- One imx93 change from Shenwei Wang to fix the default value for STMMAC
EQOS snps,clk-csr
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAma7a9EUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4FFAf/RVBrDLv5/Bj6IJl6gJSGw31l6mz/
gb3uCDbSF7JxNrGCbTz5IcDJmDJnDrg68m+UiNS3vwq0tXd3rN2MXy55bxE0XA7n
4drzyFuV0Cuqpr8snAgxzvX5F4w+vT1z9vk5fDxY5YAvxGbtYFMYnanE6w2Fs2g+
2nVxChCWlAqHEfO5E/hQKZzMtjU/ATKHZMqOG1ZFypoyBuO96GTDNMoYlZrfYiRh
7alnxUnvMNJ2UX0OC9SLb3CVAtt9lxGKT5KEps2LSeiRw1dQ8KdTpjreIkoh7mMh
MDHiHORgO5VAyOLPv/jUb23q9KzT3HSqpl/TMtG34pvHb7E9YODRZLwGCg==
=Tzc4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=gOQs
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.11:
- One imx8mp-beacon-kit change from Adam Ford to fix the broken WM8962
audio support
- One pinctrl property typo fix for imx8mm-phygate
- One layerscape fix from Krzysztof Kozlowski to get thermal nodes
correct name length
- A couple of imx93-tqma9352 fixes from Markus Niebel, one on CMA
alloc-ranges and the other on SD-Card cd-gpios typo
- One change from Michal Vokáč to fix imx6dl-yapp43 LED current to match
the HW design
- A couple of imx95 fixes from Peng Fan, one to correct a55 power
domains and the other to correct L3Cache cache-sets
- One tqma9352 watchdog reset fix from Sascha Hauer
- One imx93 change from Shenwei Wang to fix the default value for STMMAC
EQOS snps,clk-csr
* tag 'imx-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
arm64: dts: layerscape: fix thermal node names length
Link: https://lore.kernel.org/r/ZrtsTO1+jXhJ6GSM@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use national,lm75a to specify exact variant used. This should cause
no functional changes.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable IIO hwmon support for ADC1 and ADC2. All channels are
available on X23 (ADC2) and X24 (ADC1) of MBa7x.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The RTC and RTT peripherals use the timing domain slow clock (TD_SLCK),
sourced from the 32.768 kHz crystal oscillator or slow rc oscillator.
The previously used Monitoring domain slow clock (MD_SLCK) is sourced
from an internal RC oscillator which is most probably not precise enough
for real time clock purposes.
Fixes: 1e5f532c27 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 5f6b33f463 ("ARM: dts: sam9x60: add rtt")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20240821055136.6858-1-ada@thorsis.com
[claudiu.beznea: removed () around the last commit description paragraph,
removed " in front of "timing domain slow clock", described that
TD_SLCK can also be sourced from slow rc oscillator]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The driver data specific to each pinctrl GPIO bank compatible nodes are not
the same and declaring additional compatible string as fallback has no
specific purpose, hence, removing the "atmel,at91sam9x5-gpio" compatible from
sam9x60 SoC DT.
Note: The at91 pinctrl driver uses "atmel,at91rm9200-gpio" compatible string
to find the number of active GPIO banks and identify the pinmux nodes.It
should used as a constant across all DT for GPIO node banks that uses PIO3
based pinctrl driver
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240814061315.112564-4-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The driver data specific to each pinctrl GPIO bank compatible nodes are not
the same and declaring additional compatible string as fallback has no
specific purpose, hence, removing the additional compatible string from the
pinctrl nodes in DT to comply with atmel,at91-pinctrl.txt documentation.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240814061315.112564-3-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The pinctrl subnodes that define the pin configuration of other devices
under PIO3 pinmux controller are not simple memory mapped nodes.Ergo,
change simple-bus to simple-mfd.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240814061315.112564-2-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Algorithm registration is usually carried out during module init,
where as little work as possible should be carried out. The SIMD
code violated this rule by allocating a tfm, this then triggers a
full test of the algorithm which may dead-lock in certain cases.
SIMD is only allocating the tfm to get at the alg object, which is
in fact already available as it is what we are registering. Use
that directly and remove the crypto_alloc_tfm call.
Also remove some obsolete and unused SIMD API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add temperature device in i2c0 and i2c2.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-9-peteryin.openbmc@gmail.com
[andrew: Fixed 'deivce' typo in commit message]
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add power-chassis-control and power-chassis-power for phosphor-power.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-4-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
