There are some sparse warnings in the HNS drivers:
warning: incorrect type in assignment (different address spaces)
expected void [noderef] <asn:2> *io_base
got void *vaddr
warning: cast removes address space '<asn:2>' of expression
[...]
Add __iomem and change all the u8 __iomem to void __iomem to
fix these kind of warnings.
warning: incorrect type in argument 1 (different address spaces)
expected void [noderef] <asn:2> *base
got unsigned char [usertype] *base_addr
warning: cast to restricted __le16
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] tbl_tcam_data_high
got restricted __le32 [usertype]
warning: cast to restricted __le32
[...]
These variables used u32/u16 as their type, and finally as a
parameter of writel(), writel() will do the cpu_to_le32 coversion
so remove the little endian covert code to fix these kind of warnings.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ICMP6 neighbor solicitation messages will be discard by the Hip06
chips, because of not setting forwarding pool. Enable promisc mode
has the same problem.
This patch fix the wrong forwarding table configs for the multicast
vague matching when enable promisc mode, and add forwarding pool
for the forwarding table.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the HNS driver loaded, always have an error print:
"netif_napi_add() called with weight 256"
This is because the kernel checks the NAPI polling weights
requested by drivers and it prints an error message if a driver
requests a weight bigger than 64.
So use NAPI_POLL_WEIGHT to fix it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is trying to fix the issue due to:
[27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv]
After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be
interrupted by interruptions, and than call hns_nic_tx_poll_one()
to handle the new packets, and free the skb. So, when turn back to
hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free.
This patch update tx ring statistics in hns_nic_tx_poll_one() to
fix the bug.
Signed-off-by: Liubin Shu <shuliubin@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan says:
====================
code optimizations & bugfixes for HNS3 driver
This patchset includes bugfixes and code optimizations for
the HNS3 ethernet controller driver.
Change log:
V1->V2: fixes comments from Sergei Shtylyov
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The function hnae3_match_n_instantiate() was called both by
initializing or uninitializing client. For uninitializing, the
return value was never used.
To make it more clear, this patch splits it to two functions,
hnae3_init_client_instance() and hnae3_uninit_client_instance().
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the hns3_reset_notify_uninit_enet() HNS3_NIC_STATE_INITED flag
should be checked and cleared firstly.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When resetting, the changing of MTU is not allowed, so this patch
adds checking reset status in hns3_nic_change_mtu() to do that.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hns3_get_stats() should check the resetting status firstly,
since the device will be reinitialized when resetting. If the
reset has not completed, the hns3_get_stats() may access
invalid memory.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It used netdev->uc and netdev->mc list in function
hns3_recover_hw_addr() and hns3_remove_hw_addr().
We should add protect for them.
Fixes: f05e21097121 ("net: hns3: Clear mac vlan table entries when unload driver or function reset")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
csq is used as a ring buffer, the value of the desc will be replaced
in next use. This patch removes the unnecessary memset, and just
updates the next_to_clean.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a likely case for hns3_fill_desc and
limits the local variables' scope as much as possible,
also avoid div operation when the tqp_vector->num_tqps
is one.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch optimizes the ring_space by calculating the
ring space without calling ring_dist.
Also ring_dist is only used by ring_space, so this patch
removes it when it is no longer used.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When set 2 same MAC to different function of one port, IMP
will return error as the later one may modify the origin one.
This will cause bond fail for 2 VFs of one port.
Driver just print warning and return 0 with this patch, so
if set same MAC address, it will return 0 but do not really
configure HW.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Method for obtaining the media type of the VF network port periodically,
regular tasks will not run until the network port UP. When the network
port is DOWN, the network port cannot obtain the media type.
Modifies the media type obtained when initializing the VF network port.
Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the kdump kernel started, the HNS3 driver fail to register:
[14.753340] hns3 0000:7d:00.0: Alloc umv space failed, want 512, get 0
[14.795034] hns3 0000:7d:00.0: add uc mac address fail, ret =-22.
By default, the HNS3 driver will use about 512M memory, but
usually the reserved memory of kdump kernel is 576M, so the HNS3
driver fail to register. This patch reduces the memory use in
kdump kernel to about 16M.
And when the kdump kernel starts, we must clear ucast mac address
first to avoid add fail.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hip08 SOC does not support 1000M half, this patch adds 1000M half
check for hns3_ethtool_ops.set_link_ksettings, so the user can not
set 1000M half by ethtool.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename bpf_flow_dissector.txt to bpf_flow_dissector.rst and fix
formatting. Also, link it from the Documentation/networking/index.rst.
Tested with 'make htmldocs' to make sure it looks reasonable.
Fixes: ae82899bbe92 ("flow_dissector: document BPF flow dissector environment")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Mikhail Gavrilo reported the following bug being triggered in a Fedora
kernel based on 5.1-rc1 but it is relevant to a vanilla kernel.
kernel: page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
kernel: ------------[ cut here ]------------
kernel: kernel BUG at include/linux/mm.h:1021!
kernel: invalid opcode: 0000 [#1] SMP NOPTI
kernel: CPU: 6 PID: 116 Comm: kswapd0 Tainted: G C 5.1.0-0.rc1.git1.3.fc31.x86_64 #1
kernel: Hardware name: System manufacturer System Product Name/ROG STRIX X470-I GAMING, BIOS 1201 12/07/2018
kernel: RIP: 0010:__reset_isolation_pfn+0x244/0x2b0
kernel: Code: fe 06 e8 0f 8e fc ff 44 0f b6 4c 24 04 48 85 c0 0f 85 dc fe ff ff e9 68 fe ff ff 48 c7 c6 58 b7 2e 8c 4c 89 ff e8 0c 75 00 00 <0f> 0b 48 c7 c6 58 b7 2e 8c e8 fe 74 00 00 0f 0b 48 89 fa 41 b8 01
kernel: RSP: 0018:ffff9e2d03f0fde8 EFLAGS: 00010246
kernel: RAX: 0000000000000034 RBX: 000000000081f380 RCX: ffff8cffbddd6c20
kernel: RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffff8cffbddd6c20
kernel: RBP: 0000000000000001 R08: 0000009898b94613 R09: 0000000000000000
kernel: R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000100000
kernel: R13: 0000000000100000 R14: 0000000000000001 R15: ffffca7de07ce000
kernel: FS: 0000000000000000(0000) GS:ffff8cffbdc00000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00007fc1670e9000 CR3: 00000007f5276000 CR4: 00000000003406e0
kernel: Call Trace:
kernel: __reset_isolation_suitable+0x62/0x120
kernel: reset_isolation_suitable+0x3b/0x40
kernel: kswapd+0x147/0x540
kernel: ? finish_wait+0x90/0x90
kernel: kthread+0x108/0x140
kernel: ? balance_pgdat+0x560/0x560
kernel: ? kthread_park+0x90/0x90
kernel: ret_from_fork+0x27/0x50
He bisected it down to e332f741a8dd ("mm, compaction: be selective about
what pageblocks to clear skip hints"). The problem is that the patch in
question was sloppy with respect to the handling of zone boundaries. In
some instances, it was possible for PFNs outside of a zone to be examined
and if those were not properly initialised or poisoned then it would
trigger the VM_BUG_ON. This patch corrects the zone boundary issues when
resetting pageblock skip hints and Mikhail reported that the bug did not
trigger after 30 hours of testing.
Link: http://lkml.kernel.org/r/20190327085424.GL3189@techsingularity.net
Fixes: e332f741a8dd ("mm, compaction: be selective about what pageblocks to clear skip hints")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
-----BEGIN PGP SIGNATURE-----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=TvT3
-----END PGP SIGNATURE-----
Merge tag '5.1-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb3 fixes from Steve French:
"Four smb3 fixes for stable:
- fix an open path where we had an unitialized structure
- fix for snapshot (previous version) enumeration
- allow reconnect timeout on handles to be configurable to better
handle network or server crash
- correctly handle lack of file_all_info structure"
* tag '5.1-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: a smb2_validate_and_copy_iov failure does not mean the handle is invalid.
SMB3: Allow persistent handle timeout to be configurable on mount
smb3: Fix enumerating snapshots to Azure
cifs: fix kref underflow in close_shroot()
David Ahern says:
====================
net: More movement to fib_nh_common
Second set of three with the end goal of enabling IPv6 gateways with IPv4
routes.
This set moves:
- the ipv4 tracepoint to take a fib_nh_common and updates it to handle
a v6 gateway.
- consolidates route notifications to use the same fill functions
for both ipv4 and ipv6
v4
- enhanced the commit message for patches 1 and 2
v3
- comments from Martin:
+ renamed FIB_RES_NH to FIB_RES_NHC
+ removed family check from fib_result_prefsrc
+ in fib_nexthop_info, renamed nexthop arg to nhc and dropped for_ipv4 arg
v2
- dropped patches moving cached routes and exception buckets to
fib_nh_common. The goal is allowing a fib6_nh to be used with an
IPv4 route. The hold up is the need for separate exception buckets -
one for v6 routes and one for v4 routes. When all of the nexthop patches
are in, adding a secondi exception bucket pushes IPv6 fib6_info
allocations over 256 which means fib6_info allocations roll up to 512.
Hence, deferring the patches until some data mining can be done to keep
the allocations at 256.
====================
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Export fib_nexthop_info and fib_add_nexthop for use by IPv6 code.
Remove rt6_nexthop_info and rt6_add_nexthop in favor of the IPv4
versions. Update fib_nexthop_info for IPv6 linkdown check and
RTA_GATEWAY for AF_INET6.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the exception of the nexthop weight, the nexthop attributes used by
fib_nexthop_info and fib_add_nexthop come from the fib_nh_common struct.
Update both to use it and change fib_nexthop_info to check the family
as needed.
nexthop weight comes from the common struct for existing use cases, but
for nexthop groups the weight is outside of the fib_nh_common to allow
the same nexthop definition to be used in multiple groups with different
weights.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to ipv6, move addition of nexthop attributes to dump
message into helpers that are called for both single path and
multipath routes. Align the new helpers to the IPv6 variant
which most notably means computing the flags argument based on
settings in nh_flags.
The RTA_FLOW argument is unique to IPv4, so it is appended after
the new fib_nexthop_info helper. The intent of a later patch is to
make both fib_nexthop_info and fib_add_nexthop usable for both IPv4
and IPv6. This patch is stepping stone in that direction.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the ipv4 code only needs data from fib_nh_common. Add
fib_nh_common selection to fib_result and update users to use it.
Right now, fib_nh_common in fib_result will point to a fib_nh struct
that is embedded within a fib_info:
fib_info --> fib_nh
fib_nh
...
fib_nh
^
fib_result->nhc ----+
Later, nhc can point to a fib_nh within a nexthop struct:
fib_info --> nexthop --> fib_nh
^
fib_result->nhc ---------------+
or for a nexthop group:
fib_info --> nexthop --> nexthop --> fib_nh
nexthop --> fib_nh
...
nexthop --> fib_nh
^
fib_result->nhc ---------------------------+
In all cases nhsel within fib_result will point to which leg in the
multipath route is used.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update fib_table_lookup tracepoint to take a fib_nh_common struct and
dump the v6 gateway address if the nexthop uses it.
Over the years saddr has not proven useful and the output of the
tracepoint produces very long lines. Since saddr is not part of
fib_nh_common, drop it. If it needs to be added later, fib_nh which
contains saddr can be obtained from a fib_nh_common via container_of.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The original patch didn't consider the case that autoneg process
finishes successfully but both link partners have no mode in common.
In this case there's no link, nevertheless we may be interested in
what the link partner advertised.
Like phydev->link we set phydev->autoneg_complete in
genphy_update_link() and use the stored value in genphy_read_status().
This way we don't have to read register BMSR again.
Fixes: b6163f194c69 ("net: phy: improve genphy_read_status")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart says:
====================
net: phy: marvell10g: implement suspend/resume callbacks
This series implements the suspend/resume callbacks in the marvell10g
PHY driver.
Thanks,
Antoine
Since v3:
- Use the new phy_set/clear_bits_mmd() instead of phy_modify_mmd().
- Use VEND2.f001.11 to power down the port instead of the per-mode
LPOWER.
Since v2:
- Removed the third patch, setting the PHY in low power by default, as
the change was controversial.
- Rebased on the latest net-next.
Since v1:
- Fixed a mix up in the patches where two implementations of the
suspend/resume callbacks were kept in the driver.
- Rebased on the latest net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the 88x2110 PHY support was added, the suspend and resume callbacks
were forgotten. This patch adds them to the 88x2110 PHY callback
definition.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the suspend/resume callbacks for Marvell 10G PHYs. The
three PCS (base-t, base-r and 1000base-x) are set in low power (the PCS
are powered down) when the PHY isn't used.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At the beginning of ip6_fragment func, the prevhdr pointer is
obtained in the ip6_find_1stfragopt func.
However, all the pointers pointing into skb header may change
when calling skb_checksum_help func with
skb->ip_summed = CHECKSUM_PARTIAL condition.
The prevhdr pointe will be dangling if it is not reloaded after
calling __skb_linearize func in skb_checksum_help func.
Here, I add a variable, nexthdr_offset, to evaluate the offset,
which does not changes even after calling __skb_linearize func.
Fixes: 405c92f7a541 ("ipv6: add defensive check for CHECKSUM_PARTIAL skbs in ip_fragment")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Reported-by: Wenhao Zhang <zhangwenhao8@huawei.com>
Reported-by: syzbot+e8ce541d095e486074fc@syzkaller.appspotmail.com
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we may merge incorrectly a received GSO packet
or a packet with frag_list into a packet sitting in the
gro_hash list. skb_segment() may crash case because
the assumptions on the skb layout are not met.
The correct behaviour would be to flush the packet in the
gro_hash list and send the received GSO packet directly
afterwards. Commit d61d072e87c8e ("net-gro: avoid reorders")
sets NAPI_GRO_CB(skb)->flush in this case, but this is not
checked before merging. This patch makes sure to check this
flag and to not merge in that case.
Fixes: d61d072e87c8e ("net-gro: avoid reorders")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
drivers/net/dsa/microchip/ksz9477.c: In function ‘ksz9477_get_interface’:
drivers/net/dsa/microchip/ksz9477.c:1145:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (gbit)
^
drivers/net/dsa/microchip/ksz9477.c:1147:2: note: here
case 0:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
net/rxrpc/local_object.c: In function ‘rxrpc_open_socket’:
net/rxrpc/local_object.c:175:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (ret < 0) {
^
net/rxrpc/local_object.c:184:2: note: here
case AF_INET:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Currently, GCC is expecting to find the fall-through annotations
at the very bottom of the case and on its own line. That's why
I had to add the annotation, although the intentional fall-through
is already mentioned in a few lines above.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/gpu/drm/i915/gvt/display.c:457: warning: Function parameter or member 'connected' not described in 'intel_vgpu_emulate_hotplug'
drivers/gpu/drm/i915/gvt/display.c:457: warning: Excess function parameter 'conncted' description in 'intel_vgpu_emulate_hotplug'
Fixes: 1ca20f33df42 ("drm/i915/gvt: add hotplug emulation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
stride isn't in unit of pixel, it is bytes, so calculation of
plane size doesn't need to multiple bpp.
Fixes: e546e281d33d ("drm/i915/gvt: Dmabuf support for GVT-g")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Pull HID fixes from Jiri Kosina:
- build dependency fix for hid-asus from Arnd Bergmann
- addition of omitted mapping of _ASSISTANT key from Dmitry Torokhov
- race condition fix in hid-debug inftastructure from He, Bo
- fixed support for devices with big maximum report size from Kai-Heng
Feng
- deadlock fix in hid-steam from Rodrigo Rivas Costa
- quite a few device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: input: add mapping for Assistant key
HID: i2c-hid: Disable runtime PM on Synaptics touchpad
HID: quirks: Fix keyboard + touchpad on Lenovo Miix 630
HID: logitech: Handle 0 scroll events for the m560
HID: debug: fix race condition with between rdesc_show() and device removal
HID: logitech: check the return value of create_singlethread_workqueue
HID: Increase maximum report size allowed by hid_field_extract()
HID: steam: fix deadlock with input devices.
HID: uclogic: remove redudant duplicated null check on ver_ptr
HID: quirks: Drop misused kernel-doc annotation
HID: hid-asus: select CONFIG_POWER_SUPPLY
HID: quirks: use correct format chars in dbg_hid
Stanislav Fomichev says:
====================
This patch series fixes the existing BPF flow dissector API to
support calling BPF progs from the eth_get_headlen context (the
support itself will be added in bpf-next tree).
The summary of the changes:
* fix VLAN handling in bpf_flow.c, we don't need to peek back and look
at skb->vlan_present; add selftests
* pass and use flow_keys->n_proto instead of skb->protocol
* fix clamping of flow_keys->nhoff for packets with nhoff > 0
* prohibit access to most of the __sk_buff fields from BPF flow
dissector progs; only data/data_end/flow_keys are allowed (all input
is now passed via flow_keys)
* finally, document BPF flow dissector program environment
====================
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Petar Penkov <peterpenkov96@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Short doc on what BPF flow dissector should expect in the input
__sk_buff and flow_keys.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use whitelist instead of a blacklist and allow only a small set of
fields that might be relevant in the context of flow dissector:
* data
* data_end
* flow_keys
This is required for the eth_get_headlen case where we have only a
chunk of data to dissect (i.e. trying to read the other skb fields
doesn't make sense).
Note, that it is a breaking API change! However, we've provided
flow_keys->n_proto as a substitute for skb->protocol; and there is
no need to manually handle skb->vlan_present. So even if we
break somebody, the migration is trivial. Unfortunately, we can't
support eth_get_headlen use-case without those breaking changes.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Don't allow BPF program to set flow_keys->nhoff to less than initial
value. We currently don't read the value afterwards in anything but
the tests, but it's still a good practice to return consistent
values to the test programs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is a preparation for the next commit that would prohibit access to
the most fields of __sk_buff from the BPF programs.
Instead of requiring BPF flow dissector programs to look into skb,
pass all input data in the flow_keys.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When we tail call PROG(VLAN) from parse_eth_proto we don't need to peek
back to handle vlan proto because we didn't adjust nhoff/thoff yet. Use
flow_keys->n_proto, that we set in parse_eth_proto instead and
properly increment nhoff as well.
Also, always use skb->protocol and don't look at skb->vlan_present.
skb->vlan_present indicates that vlan information is stored out-of-band
in skb->vlan_{tci,proto} and vlan header is already pulled from skb.
That means, skb->vlan_present == true is not relevant for BPF flow
dissector.
Add simple test cases with VLAN tagged frames:
* single vlan for ipv4
* double vlan for ipv6
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
According to HUTRR89 usage 0x1cb from the consumer page was assigned to
allow launching desktop-aware assistant application, so let's add the
mapping.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since this driver only has a dependency on ARCH_SUNXI just because it
doesn't make any sense to run it on something else, we can definitely
enable it through COMPILE_TEST as well to get some build coverage.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
-----BEGIN PGP SIGNATURE-----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=N+5Y
-----END PGP SIGNATURE-----
Merge tag 'pidfd-fixes-v5.1-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull pidfd fix from Christian Brauner:
"This should be an uncontroversial fix for pidfd_send_signal() by Jann
to better align it's behavior with other signal sending functions:
In one of the early versions of the patchset it was suggested to not
unconditionally error out when a signal with SI_USER is sent to a
non-current task (cf. [1]).
Instead, pidfd_send_signal() currently silently changes this to a
regular kill signal. While this is technically fine, the semantics are
weird since the kernel just silently converts a user's request behind
their back and also no other signal sending function allows to do
this. It gets more hairy when we introduce sending signals to a
specific thread soon.
So let's align pidfd_send_signal() with all the other signal sending
functions and error out when SI_USER signals are sent to a non-current
task"
* tag 'pidfd-fixes-v5.1-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
signal: don't silently convert SI_USER signals to non-current pidfd
