This adds QC10C compressed pixel format in the Venus driver, and
make it possible to discover from v4l2 clients.
Note: The QC10C format will be enumerable via VIDIOC_ENUM_FMT when
the bitstream is 10-bits and the headers are parsed.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This adds QC08C compressed pixel format in the Venus driver, and
make it possible to discover from v4l2 clients.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a helper to check supported pixel format per codec and session
type.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Video decoder driver auto-suspends the hardware if there is no
exchange of command or response for certain amount of time.
In auto suspended state, it becomes mandatory to power on the
hardware before requesting it to process a command. The fix
ensures the hardware is powered on during stop streaming.
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
During reconfig (DRC) event from firmware, it is not guaranteed that
all the DPB(internal) buffers would be released by the firmware. Some
buffers might be released gradually while processing frames from the
new sequence. These buffers now stay idle in the dpblist.
In subsequent call to queue the DPBs to firmware, these idle buffers
should not be queued. The fix identifies those buffers and free them.
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If venus_probe fails at pm_runtime_put_sync the error handling first
calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets
core->ops to NULL, hfi_core_deinit cannot call the core_deinit function
anymore.
Avoid this null pointer derefence by skipping the call when necessary.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This error can appear with wrong configuration and is difficult to find
as it just returns -ETIMEDOUT with no further message.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Simplify the mux error path a bit by using dev_err_probe().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The V4L2 subdevs have managed without centralized locking for the state
(previously pad_config), as the try-state is supposedly safe (although I
believe two TRY ioctls for the same fd would race), and the
active-state, and its locking, is managed by the drivers internally.
We now have active-state in a centralized position, and need locking.
Strictly speaking the locking is only needed for new drivers that use
the new state, as the current drivers continue behaving as they used to.
However, active-state locking is complicated by the fact that currently
the real active-state of a subdev is split into multiple parts: the new
v4l2_subdev_state, subdev control state, and subdev's internal state.
In the future all these three states should be combined into one state
(the v4l2_subdev_state), and then a single lock for the state should be
sufficient.
But to solve the current split-state situation we need to share locks
between the three states. This is accomplished by using the same lock
management as the control handler does: we use a pointer to a mutex,
allowing the driver to override the default mutex. Thus the driver can
do e.g.:
sd->state_lock = sd->ctrl_handler->lock;
before calling v4l2_subdev_init_finalize(), resulting in sharing the
same lock between the states and the controls.
The locking model for active-state is such that any subdev op that gets
the state as a parameter expects the state to be already locked by the
caller, and expects the caller to release the lock.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
v4l2_subdev_alloc_state() and v4l2_subdev_free_state() are not supposed
to be used by the drivers. However, we do have a few drivers that use
those at the moment, so we need to expose these functions for the time
being.
Prefix the functions with __ to mark the functions as internal.
At the same time, rename them to v4l2_subdev_state_alloc and
v4l2_subdev_state_free to match the style used for other functions like
video_device_alloc() and media_request_alloc().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The bus_info field is set by most drivers based on the type of the device
bus as well as the name of the device. Do this in v4l_querycap() so
drivers don't need to. This keeps compatibility with non-default and silly
bus_info.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Set bus_info field based on struct device in media_device_init() and
remove corresponding code from drivers.
Also update media_device_init() documentation: the dev field must be now
initialised before calling it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add support for MEDIA_BUS_FMT_JPEG_1X8 media bus code to the
CSIS driver.
The MEDIA_BUS_FMT_JPEG_1X8 code is mapped to the RAW8 CSI-2 Data Type,
while the CSI-2 specification suggests to use User Defined Data Type 1.
As reported in the comment, the CSIS interface captures arbitrary Data
Types by using a pixel sampling mode not supported by the IP core
connected to it on i.MX SoCs.
As some sensors, such as OV5640, support sending JPEG data on the RAW8
Data Type and capture operations work correcty with such configuration,
map MEDIA_BUS_FMT_JPEG_1X8 to Data Type 0x2a.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The imx-mipi-csis driver (VIDEO_IMX_MIPI_CSIS) lost its dependency on
VIDEO_DEV in commit 63fe3d27b226 ("media: platform/*/Kconfig: make
manufacturer menus more uniform"). This causes build failures with
configurations that don't have VIDEO_DEV set. Fix it by restoring the
dependency.
Link: https://lore.kernel.org/linux-media/20220331123151.1953-1-laurent.pinchart@ideasonboard.com
Fixes: 63fe3d27b226 ("media: platform/*/Kconfig: make manufacturer menus more uniform")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The latest fix for probe error handling contained a typo that causes
probing to fail with the following message:
rockchip-rga: probe of ff680000.rga failed with error -12
This patch fixes the typo.
Fixes: e58430e1d4fd (media: rockchip/rga: fix error handling in probe)
Reviewed-by: Dragan Simic <dragan.simic@gmail.com>
Signed-off-by: Kyle Copperfield <kmcopper@danwin1210.me>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The imx-mipi-csis driver is specific to NXP platforms. Restrict it to
those by default, and enable compilation with COMPILE_TEST to keep a
wide test coverage.
Link: https://lore.kernel.org/linux-media/20220318203735.5923-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
there is issue that driver forget to
call media_device_cleanup if media_device_register fail,
it will led to memory leak.
Also driver should check the return value of vpu_add_func.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
fix some issues reported by Dan,
1. fix some signedness bug
2. don't use u32 as function return value
3. prevent a divide by zero bug
4. Just return zero on success, don't return a known parameter
5. check the validity of some variables
6. reset buffer state when return buffers
7. make sure the ALIGN won't wrap to zero
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
1. use ns_to_timespec64 instead of division method
2. use timespec64_to_ns instead of custom macro
3. remove unused custom macro
4. don't modify minus timestamp
5. remove some unused debug timestamp information
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
pm_runtime_get_sync() also returns 1 on success.
The documentation for pm_runtime_get_sync() suggests using
pm_runtime_resume_and_get() instead
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
Eliminate the follow coccicheck warnings:
./drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_drv.c:119:2-9:
line 119 is redundant because platform_get_irq() already prints an error
./drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_hw.c:103:2-9:
line 103 is redundant because platform_get_irq() already prints an error
Link: https://lore.kernel.org/linux-media/20220316001411.80167-1-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
of_find_compatible_node() will increment the refcount of the returned
device_node. Calling of_node_put() to avoid the refcount leak.
Link: https://lore.kernel.org/linux-media/20220316123452.186166-1-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
while COMPILE_TEST is y and MAILBOX is n, build fails:
ERROR: modpost: "mbox_request_channel_byname" [drivers/media/platform/amphion/amphion-vpu.ko] undefined!
ERROR: modpost: "mbox_free_channel" [drivers/media/platform/amphion/amphion-vpu.ko] undefined!
ERROR: modpost: "mbox_send_message" [drivers/media/platform/amphion/amphion-vpu.ko] undefined!
Adding a MAILBOX dependency in VIDEO_AMPHION_VPU to fix this.
Link: https://lore.kernel.org/linux-media/20220318030305.39120-1-yuehaibing@huawei.com
Fixes: 52b3a219dd4a ("media: platform: amphion: move config to its own file")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename mediatek/mtk-jpeg/ to mediatek/jpeg/.
Requested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
media Kconfig has two entries associated to V4L API:
VIDEO_DEV and VIDEO_V4L2.
On Kernel 2.6.x, there were two V4L APIs, each one with its own flag.
VIDEO_DEV were meant to:
1) enable Video4Linux and make its Kconfig options to appear;
2) it makes the Kernel build the V4L core.
while VIDEO_V4L2 where used to distinguish between drivers that
implement the newer API and drivers that implemented the former one.
With time, such meaning changed, specially after the removal of
all V4L version 1 drivers.
At the current implementation, VIDEO_DEV only does (1): it enables
the media options related to V4L, that now has:
menu "Video4Linux options"
visible if VIDEO_DEV
source "drivers/media/v4l2-core/Kconfig"
endmenu
but it doesn't affect anymore the V4L core drivers.
The rationale is that the V4L2 core has a "soft" dependency
at the I2C bus, and now requires to select a number of other
Kconfig options:
config VIDEO_V4L2
tristate
depends on (I2C || I2C=n) && VIDEO_DEV
select RATIONAL
select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
default (I2C || I2C=n) && VIDEO_DEV
In the past, merging them would be tricky, but it seems that it is now
possible to merge those symbols, in order to simplify V4L dependencies.
Let's keep VIDEO_DEV, as this one is used on some make *defconfig
configurations.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for meson-vdec & meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Do some adjustments at the per-vendor Kconfig, adding a comment at
the beginning in order to identify the manufacturer, and adjust
a few entries to make them look more uniform.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # For sunxi
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Instead of placing multiple per-vendor entries at the
platform/{Makefile,Kconfig}, create them at the per-vendor
directories.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to follow the changes made by the previous patch,
which moved platform/ti-vpe to platform/ti, move the Kconfig
entries to the same place.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The ti-vpe/ sub-directory does not only contain the VPE-specific things.
It also contains the CAL driver, which is a completely different
subsystem. This is also not a good place to add new drivers for other TI
platforms since they will all get mixed up.
Separate the VPE and CAL parts into different sub-directories and rename
the ti-vpe/ sub-directory to ti/. This is now the place where new TI
platform drivers can be added.
[mchehab: rebased to apple on the top of media/platform/Kconfig series]
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename omap/ to ti/omap/.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename omap3isp/ to ti/omap3isp/.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename davinci/ to ti/davinci/.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename am437x/ to ti/am437x/.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
move both stm32/ and sti/ for them to be inside st/ directory.
Acked-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename s5p-mfc/ to samsung/s5p-mfc/.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename s5p-jpeg/ to samsung/s5p-jpeg/.
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename s5p-g2d/ to samsung/s5p-g2d/.
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename s3c-camif/ to samsung/s3c-camif/.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename exynos-gsc/ to samsung/exynos-gsc/.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename exynos4-is/ to samsung/exynos4-is/.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename tegra/vde/ to nvidia/tegra-vde/.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename mtk-vpu/ to mediatek/mtk-vpu/.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename mtk-vcodec/ to mediatek/mtk-vcodec/.
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename mtk-mdp/ to mediatek/mtk-mdp/.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename mtk-jpeg/ to mediatek/mtk-jpeg/.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename meson/ge2d/ to amlogic/meson-ge2d/.
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As the end goal is to have platform drivers split by vendor,
rename marvell-ccic/ to marvell/.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
