For consistency across the driver, use the u32 type instead of unsigned
long for holding register values and return value of cpu_logical_map().
One exception is when the variable is referenced for passing into
for_each_set_bit(), in which case it has to be unsigned long.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240711160907.31012-9-kabel@kernel.org
Refactor the mpic_reenable_percpu() and mpic_resume() functions to make
them a little bit simpler.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240711160907.31012-5-kabel@kernel.org
When iterating, use either the irq_hw_number_t type or the unsigned int
type for the iterator variable, depending on whether the variable
represents HW IRQ number or whether it is added to a IRQ number.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240711160907.31012-3-kabel@kernel.org
Refactor the handling of IPI interrupts
- put into own function mpic_handle_ipi_irq(), similar to
mpic_handle_msi_irq()
- rename the variable holding the doorbell cause register to "cause"
- retype and rename the variable holding the IPI HW IRQ number to
"irq_hw_number_t i"
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-11-kabel@kernel.org
Refactor the mpic_handle_msi_irq() function to make it simpler:
- drop the function arguments, they are not needed
- rename the variable holding the doorbell cause register to "cause"
- rename the iterating variable to "i"
- use for_each_set_bit() (requires retyping "cause" to unsigned long)
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-10-kabel@kernel.org
Use FIELD_GET() and named register mask constant when reading the number
of supported interrupts / current interrupt.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-9-kabel@kernel.org
Use mpic_domain::hwirq_max at runtime instead of reading the same value
over and over from the MPIC_INT_CONTROL register.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-8-kabel@kernel.org
Change symbol prefixes from armada_370_xp_ or others to mpic_.
The rationale is that it is shorter and more generic (this controller
is called MPIC and is also used on Armada 38x and 39x).
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-7-kabel@kernel.org
Add some blank lines and other indentation improvements.
Checkpatch now stops complaining.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-6-kabel@kernel.org
Refactor the ipi_resume() function to drop one indentation level.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-5-kabel@kernel.org
Use !virq instead of virq == 0 when checking for availability of the
virq.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-4-kabel@kernel.org
The return type of irq_find_mapping() and irq_linear_revmap() is
unsigned int. Use the unsigned int type for the variables storing the
return value.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-3-kabel@kernel.org
Rename the irq variable to virq in the ipi_resume() function for
consistency with the rest of the code.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-2-kabel@kernel.org
Where possible, declare iterators in for cycle. This is possible since
kernel uses -std=gnu11.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/all/20240708151801.11592-11-kabel@kernel.org
Simplify the code in the is_percpu_irq() function. Instead of
if (condition)
return true;
return false;
simply return condition.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-9-kabel@kernel.org
Use unsigned int instead of int for variable storing the cpu number.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/all/20240708151801.11592-8-kabel@kernel.org
Change the long ARMADA_370_XP_ prefix in register constants (ARMADA_375_
in one case) to MPIC_. The rationale is that it is shorter and more
generic (this controller is called MPIC and is also used on Armada 38x
and 39x).
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/all/20240708151801.11592-7-kabel@kernel.org
Drop parentheses where not needed and add them where it makes sense in
register constant definitions.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-6-kabel@kernel.org
Change spaces to tabs in register constants definitions.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-4-kabel@kernel.org
There is one occurrence of suffix _MSK in register constants, others
have _MASK instead. Change the one to _MASK for consistency.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-3-kabel@kernel.org
Some register constants have the _OFFS suffix and some do not. Drop it
to be more consistent.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-2-kabel@kernel.org
We only had a couple of array[] declarations, and changing them to just
use 'MAX()' instead of 'max()' fixes the issue.
This will allow us to simplify our min/max macros enormously, since they
can now unconditionally use temporary variables to avoid using the
argument values multiple times.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lpic_gsi_to_irq() should return a valid Linux interrupt number if
acpi_register_gsi() succeeds, and return 0 otherwise. But lpic_gsi_to_irq()
converts a negative return value of acpi_register_gsi() to a positive value
silently.
Convert the return value explicitly.
Fixes: e8bba72b39 ("irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch")
Reported-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240723064508.35560-1-chenhuacai@loongson.cn
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This simplifies the handling of platform MSI and wire to MSI controllers
and removes about 500 lines of legacy code.
Aside of that it paves the way for ARM/ARM64 to utilize the dynamic
allocation of PCI/MSI interrupts and to support the upcoming non
standard IMS (Interrupt Message Store) mechanism on PCIe devices
-----BEGIN PGP SIGNATURE-----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=2adH
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI interrupt updates from Thomas Gleixner:
"Switch ARM/ARM64 over to the modern per device MSI domains.
This simplifies the handling of platform MSI and wire to MSI
controllers and removes about 500 lines of legacy code.
Aside of that it paves the way for ARM/ARM64 to utilize the dynamic
allocation of PCI/MSI interrupts and to support the upcoming non
standard IMS (Interrupt Message Store) mechanism on PCIe devices"
* tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/gic-v3-its: Correctly fish out the DID for platform MSI
irqchip/gic-v3-its: Correctly honor the RID remapping
genirq/msi: Move msi_device_data to core
genirq/msi: Remove platform MSI leftovers
irqchip/irq-mvebu-icu: Remove platform MSI leftovers
irqchip/irq-mvebu-sei: Switch to MSI parent
irqchip/mvebu-odmi: Switch to parent MSI
irqchip/mvebu-gicp: Switch to MSI parent
irqchip/irq-mvebu-icu: Prepare for real per device MSI
irqchip/imx-mu-msi: Switch to MSI parent
irqchip/gic-v2m: Switch to device MSI
irqchip/gic_v3_mbi: Switch over to parent domain
genirq/msi: Remove platform_msi_create_device_domain()
irqchip/mbigen: Remove platform_msi_create_device_domain() fallback
irqchip/gic-v3-its: Switch platform MSI to MSI parent
irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI
irqchip/mbigen: Prepare for real per device MSI
irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI
irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X]
irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX
...
- Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to expand
any of this for new required functionality.
The new function takes a pointer to a data structure as argument. The
data structure combines all existing parameters and allows for easy
extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization before
the new domain is published, so that concurrent usage sites won't see
a half initialized interrupt domain. Similar problems exist on
teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible workarounds
at the driver level.
- The usual small improvements all over the place
- Drivers
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version to
allow building the latter as a module for multi-platform kernels.
- Enable MSI support for Armada 370XP on platforms which do not support
IPIs.
- The usual small fixes and enhancements all over the place.
-----BEGIN PGP SIGNATURE-----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=QCRH
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
Similarly to PCI where msi-map/msi-mask are used to compute the full RID
(aka DID in ITS speak), use the msi-parent as the discovery mechanism,
since there is no way a device can generally express its ID.
However, since switching to a per-device MSI domain model, the domain
passed to its_pmsi_prepare() is the wrong one, and points to the device's
instead of the ITS'. Bad.
Use the parent domain instead, which is the ITS domain.
Fixes: 80b63cc1cc146 ("irqchip/gic-v3-its: Switch platform MSI to MSI parent")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240718075804.2245733-1-maz@kernel.org
Since 6adb35ff43a16 ("irqchip/gic-v3-its: Provide MSI parent for
PCI/MSI[-X]"), the primary domain a PCI device allocates its interrupts
from is the one that is directly attached to the device itself.
By virtue of being a PCI device, it has no OF node.
This domain is (through more layer than it is worth describing)
passed to its_pci_msi_prepare(), which tries to compute the
full RID that is presented to the ITS by the device. This is ultimately
done by calling pci_msi_domain_get_msi_rid(), passing both the
domain and the PCI device as arguments.
The baked-in assumption is that either the domain that is passed
to pci_msi_domain_get_msi_rid() describes an interrupt controller
with either an OF node or an entry in an ACPI IORT table.
In this case, it is *neither*. This domain is does not represent
anything firmware-based, but just an allocation unit for the device.
As a result, it fails to provide the full RID (which requires inspecting
the msi-map/msi-mask properties in the DT), and stick to the BDF, which
isn't very useful.
Tragedy follows with a litany of devices that randomly die as they fail to
see any MSI (because the RID is wrong) or fail to get an allocation
(because they try to steal LPIs from their neighbour's pool).
This will happen on any system where a single ITS is shared by multiple
root ports and end-points with overlapping BDF numbers, and has the
topology described in the device-tree. Simpler DT topologies will luckily
work, and so will ACPI-based systems.
Solve it by pointing pci_msi_domain_get_msi_rid() at the *parent* domain,
which is the ITS, resulting in a correct mapping and a restored happiness
in my personal zoo.
Fixes: 6adb35ff43a16 ("irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X]")
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240717195937.2240400-1-maz@kernel.org
All related domains provide MSI parent functionality, so the fallback code
to the original platform MSI implementation is not longer required.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.881677325@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" platform domain related code and provide the MSI parent
functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.820275215@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" platform domain related code and provide the MSI parent
functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.759892514@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" platform domain related code and provide the MSI parent
functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.699780279@linutronix.de
The core infrastructure has everything in place to switch ICU to per
device MSI domains and avoid the convoluted construct of the existing
platform-MSI layering violation.
The new infrastructure provides a wired interrupt specific interface in the
MSI core which converts the 'hardware interrupt number + trigger type'
allocation which is required for wired interrupts in the regular irqdomain
code to a normal MSI allocation.
The hardware interrupt number and the trigger type are stored in the MSI
descriptor device cookie by the core code so the ICU specific code can
retrieve them.
The new per device domain is only instantiated when the irqdomain which is
associated to the ICU device provides MSI parent functionality. Up to
that point it invokes the existing code. Once the parent is converted the
code for the current platform-MSI mechanism is removed.
The new domain shares the interrupt chip callbacks and the translation
function. The only new functionality aside of filling out the
msi_domain_templates is a domain specific set_desc() callback, which will go
away once all platform-MSI code has been converted.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.635015886@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" platform domain related code and provide the MSI parent
functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.574932935@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" PCI/MSI and platform domain related code and provide
the MSI parent functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.514419280@linutronix.de
The MBI chip creates two MSI domains:
- PCI/MSI
- Platform device domain
Both have the MBI domain as parent and differ slightly in the interrupt
chip callbacks and the platform device domain supports level type
signaling.
Convert it over to the MSI parent domain mechanism by:
- Providing the required templates
- Implementing a custom init_dev_msi_info() callback which sets the chip
callbacks and the level support flags depending on the domain bus token
type of the per device domain.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.455849114@linutronix.de
Now that ITS provides the MSI parent domain, remove the unused fallback
code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.333333826@linutronix.de
Similar to the previous conversion of the PCI/MSI support lift the
prepare() callback from the existing platform MSI code and enable
platform MSI and the related device domain bus tokens in select
and the child domain initialization code.
All platform MSI users are automatically using the new per device MSI model
now.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.271734124@linutronix.de
Add the new bus token to the accepted list of child domain tokens.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.207343466@linutronix.de
The core infrastructure has everything in place to switch MBIGEN to per
device MSI domains and avoid the convoluted construct of the existing
platform-MSI layering violation.
The new infrastructure provides a wired interrupt specific interface in the
MSI core which converts the 'hardware interrupt number + trigger type'
allocation which is required for wired interrupts in the regular irqdomain
code to a normal MSI allocation.
The hardware interrupt number and the trigger type are stored in the MSI
descriptor device cookie by the core code so the MBIGEN specific code can
retrieve them.
The new per device domain is only instantiated when the irqdomain which is
associated to the MBIGEN device provides MSI parent functionality. Up to
that point it invokes the existing code. Once the parent is converted the
code for the current platform-MSI mechanism is removed.
The new domain shares the interrupt chip callbacks and the translation
function. The only new functionality aside of filling out the
msi_domain_template is a domain specific set_desc() callback, which will go
away once all platform-MSI code has been converted.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.146579575@linutronix.de
Add the prerequisites for DEVICE MSI into the shared select() and child
domain init function. These domains are really trivial and just provide a
custom irq chip callback to write the MSI message.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.085171290@linutronix.de
The its_pci_msi_prepare() function from the ITS-PCI/MSI code provides the
'global' PCI/MSI domains. Move this function to the ITS-MSI parent code and
amend the function to use the domain hardware size, which is the MSI[X]
vector count, for allocating the ITS slots for the PCI device.
Enable PCI matching in msi_parent_ops and provide the necessary update to
the ITS specific child domain initialization function so that the prepare
callback gets invoked on allocations.
The latter might be optimized to do the allocation right at the point where
the child domain is initialized, but keep it simple for now.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.024567623@linutronix.de
Add the bus tokens for DOMAIN_BUS_PCI_DEVICE_MSI and
DOMAIN_BUS_PCI_DEVICE_MSIX to the common child init
function.
Provide the match mask which can be used by parent domain
implementation so the bitmask based child bus token match
works.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142234.964056815@linutronix.de
To support per device MSI domains the ITS must provide MSI parent domain
functionality.
Provide the basic skeleton for this:
- msi_parent_ops
- child domain init callback
- the MSI parent flag set in irqdomain::flags
This does not make ITS a functional parent domain as there is no bit set in
the bus_select_mask yet, but it provides the base to implement PCI and
platform MSI support gradually on top.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142234.903076277@linutronix.de
All irqdomains which provide MSI parent domain functionality for per device
MSI domains need to provide a select() callback for the irqdomain and a
function to initialize the child domain.
Most of these functions would just be copy&paste with minimal
modifications, so provide a library function which implements the required
functionality and is customizable via parent_domain::msi_parent_ops. The
check for the supported bus tokens in msi_lib_init_dev_msi_info() is
expanded step by step within the next patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142234.840975799@linutronix.de
* Virtual CPU hotplug support for arm64 ACPI systems
* cpufeature infrastructure cleanups and making the FEAT_ECBHB ID bits
visible to guests
* CPU errata: expand the speculative SSBS workaround to more CPUs
* arm64 ACPI:
- acpi=nospcr option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
* GICv3, use compile-time PMR values: optimise the way regular IRQs are
masked/unmasked when GICv3 pseudo-NMIs are used, removing the need for
a static key in fast paths by using a priority value chosen
dynamically at boot time
* arm64 perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
* arm64 kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
* arm64 Documentation update with a minor clarification on TBI
* Miscellaneous:
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos
-----BEGIN PGP SIGNATURE-----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=ob2k
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
The power domain is automatically activated from clk_prepare(). However, on
certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes
sleeping functions, which triggers the 'scheduling while atomic' bug in the
context switch path during device probing:
BUG: scheduling while atomic: kworker/u13:1/48/0x00000002
Call trace:
__schedule_bug+0x54/0x6c
__schedule+0x7f0/0xa94
schedule+0x5c/0xc4
schedule_preempt_disabled+0x24/0x40
__mutex_lock.constprop.0+0x2c0/0x540
__mutex_lock_slowpath+0x14/0x20
mutex_lock+0x48/0x54
clk_prepare_lock+0x44/0xa0
clk_prepare+0x20/0x44
imx_irqsteer_resume+0x28/0xe0
pm_generic_runtime_resume+0x2c/0x44
__genpd_runtime_resume+0x30/0x80
genpd_runtime_resume+0xc8/0x2c0
__rpm_callback+0x48/0x1d8
rpm_callback+0x6c/0x78
rpm_resume+0x490/0x6b4
__pm_runtime_resume+0x50/0x94
irq_chip_pm_get+0x2c/0xa0
__irq_do_set_handler+0x178/0x24c
irq_set_chained_handler_and_data+0x60/0xa4
mxc_gpio_probe+0x160/0x4b0
Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip
callbacks and handle power management in them as they are invoked from
non-atomic context.
[ tglx: Rewrote change log, added Fixes tag ]
Fixes: 0136afa089 ("irqchip: Add driver for imx-irqsteer controller")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240703163250.47887-1-shenwei.wang@nxp.com
The caller of gic_of_setup_kvm_info() already queried DT for the value
of the #redistributor-regions property. So just pass this value,
instead of doing the DT look-up again in the callee.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/808286a3ac08f60585ae7e2c848e0f9b3cb79cf8.1719912215.git.geert+renesas@glider.be
The BCM2835 ARMCTRL interrupt controller doesn't provide any facility to
configure the wakeup sources. That's the reason why the driver lacks the
irq_set_wake() callback for the interrupt chip.
But this prevent to properly enter power management states like "suspend to
idle".
Enable the flags IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND so the
interrupt suspend logic can handle the chip correctly.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
In order to make sure that vpe->col_idx is correctly sampled when a VMAPP
command is issued, the vpe_lock must be held for the VPE. This is now
possible since the introduction of the per-VM vmapp_lock, which can be
taken before vpe_lock in the correct locking order.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Link: https://lore.kernel.org/r/20240705093155.871070-4-maz@kernel.org
vmovp_lock is abused in a number of cases to serialise updates
to vlpi_count[] and deal with map/unmap of a VM to ITSs.
Instead, provide a per-VM lock and revisit the use of vlpi_count[]
so that it is always wrapped in this per-VM vmapp_lock.
This reduces the potential contention on a concurrent VMOVP command,
and paves the way for subsequent VPE locking that holding vmovp_lock
actively prevents due to the lock ordering.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Link: https://lore.kernel.org/r/20240705093155.871070-3-maz@kernel.org
There are currently two paths to set the initial affinity of a VPE:
- at activation time on GICv4 without the stupid VMOVP list, and
on GICv4.1
- at map time for GICv4 with VMOVP list
The latter location may end-up modifying the affinity of VPE that is
currently running, making the results unpredictible.
Instead, unify the two paths, making sure to set the initial affinity only
at activation time.
Reported-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Link: https://lore.kernel.org/r/20240705093155.871070-2-maz@kernel.org
* for-next/vcpu-hotplug: (21 commits)
: arm64 support for virtual CPU hotplug (ACPI)
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
cpumask: Add enabled cpumask for present CPUs that can be brought online
arm64: document virtual CPU hotplug's expectations
arm64: Kconfig: Enable hotplug CPU on arm64 if ACPI_PROCESSOR is enabled.
arm64: arch_register_cpu() variant to check if an ACPI handle is now available.
arm64: psci: Ignore DENIED CPUs
irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs
irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc()
arm64: acpi: Harden get_cpu_for_acpi_id() against missing CPU entry
arm64: acpi: Move get_cpu_for_acpi_id() to a header
ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug
ACPI: scan: switch to flags for acpi_scan_check_and_detach()
ACPI: processor: Register deferred CPUs from acpi_processor_get_info()
ACPI: processor: Add acpi_get_processor_handle() helper
ACPI: processor: Move checks and availability of acpi_processor earlier
ACPI: processor: Fix memory leaks in error paths of processor_add()
ACPI: processor: Return an error if acpi_processor_get_info() fails in processor_add()
ACPI: processor: Drop duplicated check on _STA (enabled + present)
cpu: Do not warn on arch_register_cpu() returning -EPROBE_DEFER
...
Compiling the GICv3 driver on arm32 with CONFIG_SMP disabled
(CONFIG_ACPI is not available) generates an unused variable warning for
'broken_rdists'. Add a __maybe_unused attribute to silence the compiler.
Fixes: d633da5d3a ("irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs")
Cc: <stable@vger.kernel.org> # .x
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To support virtual CPU hotplug, ACPI has added an 'online capable' bit
to the MADT GICC entries. This indicates a disabled CPU entry may not
be possible to online via PSCI until firmware has set enabled bit in
_STA.
This means that a "usable" GIC redistributor is one that is marked as
either enabled, or online capable. The meaning of the
acpi_gicc_is_usable() would become less clear than just checking the
pair of flags at call sites. As such, drop that helper function.
The test in gic_acpi_match_gicc() remains as testing just the
enabled bit so the count of enabled distributors is correct.
What about the redistributor in the GICC entry? ACPI doesn't want to say.
Assume the worst: When a redistributor is described in the GICC entry,
but the entry is marked as disabled at boot, assume the redistributor
is inaccessible.
The GICv3 driver doesn't support late online of redistributors, so this
means the corresponding CPU can't be brought online either.
Rather than modifying cpu masks that may already have been used,
register a new cpuhp callback to fail this case. This must run earlier
than the main gic_starting_cpu() so that this case can be rejected
before the section of cpuhp that runs on the CPU that is coming up as
that is not allowed to fail. This solution keeps the handling of this
broken firmware corner case local to the GIC driver. As precise ordering
of this callback doesn't need to be controlled as long as it is
in that initial prepare phase, use CPUHP_BP_PREPARE_DYN.
Systems that want CPU hotplug in a VM can ensure their redistributors
are always-on, and describe them that way with a GICR entry in the MADT.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240529133446.28446-15-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
gic_acpi_match_gicc() is only called via gic_acpi_count_gicr_regions().
It should only count the number of enabled redistributors, but it
also tries to sanity check the GICC entry, currently returning an
error if the Enabled bit is set, but the gicr_base_address is zero.
Adding support for the online-capable bit to the sanity check will
complicate it, for no benefit. The existing check implicitly depends on
gic_acpi_count_gicr_regions() previous failing to find any GICR regions
(as it is valid to have gicr_base_address of zero if the redistributors
are described via a GICR entry).
Instead of complicating the check, remove it. Failures that happen at
this point cause the irqchip not to register, meaning no irqs can be
requested. The kernel grinds to a panic() pretty quickly.
Without the check, MADT tables that exhibit this problem are still
caught by gic_populate_rdist(), which helpfully also prints what went
wrong:
| CPU4: mpidr 100 has no re-distributor!
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240529133446.28446-14-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The distributor and PMR/RPR can present different views of the interrupt
priority space dependent upon the values of GICD_CTLR.DS and
SCR_EL3.FIQ. Currently we treat the distributor's view of the priority
space as canonical, and when the two differ we change the way we handle
values in the PMR/RPR, using the `gic_nonsecure_priorities` static key
to decide what to do.
This approach works, but it's sub-optimal. When using pseudo-NMI we
manipulate the distributor rarely, and we manipulate the PMR/RPR
registers very frequently in code spread out throughout the kernel (e.g.
local_irq_{save,restore}()). It would be nicer if we could use fixed
values for the PMR/RPR, and dynamically choose the values programmed
into the distributor.
This patch changes the GICv3 driver and arm64 code accordingly. PMR
values are chosen at compile time, and the GICv3 driver determines the
appropriate values to program into the distributor at boot time. This
removes the need for the `gic_nonsecure_priorities` static key and
results in smaller and better generated code for saving/restoring the
irqflags.
Before this patch, local_irq_disable() compiles to:
| 0000000000000000 <outlined_local_irq_disable>:
| 0: d503201f nop
| 4: d50343df msr daifset, #0x3
| 8: d65f03c0 ret
| c: d503201f nop
| 10: d2800c00 mov x0, #0x60 // #96
| 14: d5184600 msr icc_pmr_el1, x0
| 18: d65f03c0 ret
| 1c: d2801400 mov x0, #0xa0 // #160
| 20: 17fffffd b 14 <outlined_local_irq_disable+0x14>
After this patch, local_irq_disable() compiles to:
| 0000000000000000 <outlined_local_irq_disable>:
| 0: d503201f nop
| 4: d50343df msr daifset, #0x3
| 8: d65f03c0 ret
| c: d2801800 mov x0, #0xc0 // #192
| 10: d5184600 msr icc_pmr_el1, x0
| 14: d65f03c0 ret
... with 3 fewer instructions per call.
For defconfig + CONFIG_PSEUDO_NMI=y, this results in a minor saving of
~4K of text, and will make it easier to make further improvements to the
way we manipulate irqflags and DAIF bits.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
In subsequent patches the GICv3 driver will choose the regular interrupt
priority at boot time, dependent on the configuration of GICD_CTRL.DS
and SCR_EL3.FIQ. This will need to be chosen before we configure the
distributor with default prioirities for all the interrupts, which
happens before we currently detect these in gic_cpu_sys_reg_init().
Add a new gic_prio_init() function to detect these earlier and log them
to the console so that any problems can be debugged more easily. This
also allows the uniformity checks in gic_cpu_sys_reg_init() to be
simplified, as we can compare directly with the boot CPU values which
were recorded earlier.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
In subsequent patches the GICv3 driver will choose the regular interrupt
priority at boot time.
In preparation for using dynamic priorities, place the priorities in
variables and update the code to pass these as parameters. Users of
GICD_INT_DEF_PRI_X4 are modified to replicate the priority byte using
REPEAT_BYTE_U32().
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
The gic_configure_irq(), gic_dist_config(), and gic_cpu_config()
functions each take an optional "sync_access" callback, but in almost
all cases this is not used. The only user is the GICv3 driver's
gic_cpu_init() function, which uses gic_redist_wait_for_rwp() as the
"sync_access" callback for gic_cpu_config().
It would be simpler and clearer to remove the callback and have the
GICv3 driver call gic_redist_wait_for_rwp() explicitly after
gic_cpu_config().
Remove the "sync_access" callback, and call gic_redist_wait_for_rwp()
explicitly in the GICv3 driver.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Allow to build the driver as a module by adding the necessarily hooks in
Kconfig and in the driver's code.
Since all the probe dependencies linked to this driver have already been
fixed, remove the not longer relevant 'arch_initcall'.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240620083115.204362-7-antonio.borneo@foss.st.com
Rename all the internal symbols accordingly to the new name of the
driver.
Renaming done automatically through sed rules:
s/stm32_exti_set_type/stm32mp_exti_convert_type/g
s/stm32_exti_h_/stm32mp_exti_/g
s/stm32_exti/stm32mp_exti/g
s/stm32_bank/bank/g
s/stm32_/stm32mp_/g
s/STM32_/STM32MP_/g
s/STM32MP1_/STM32MP_/g
s/stm32mp1_exti_/stm32mp_exti_/g
s/stm32-exti-h/stm32mp-exti/g
Manually fix some indentation after the rename.
[ tglx: Mop up more coding style issues while at it ]
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240620083115.204362-6-antonio.borneo@foss.st.com
Keep only the code for ARMv7m STM32 MCUs in in stm32-exti.c and split out
the code for ARMv7a & ARMv8a STM32MPxxx MPUs into stm32mp-exti.c
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240620083115.204362-5-antonio.borneo@foss.st.com
To guarantee bisect-ability during the split of stm32-exti in MCU and MPU
code, introduce CONFIG_STM32MP_EXTI.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240620083115.204362-2-antonio.borneo@foss.st.com
The driver is now always built in. In some synaptics ARM64 SoCs it is used
as a second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.
Enable it to be built as a module and handle built-in usage correctly, so
that it continues working on systems where it is the main interrupt
controller.
[ tglx: Massage changelog ]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614153449.2083-1-jszhang@kernel.org
The initialization code has an is_of_node() check and invokes to_of_node()
for every of_property_*() invocation.
to_of_node() has a is_of_node() check already, so simplify the code by
invoking to_of_node() and checking that for NULL. If not NULL hand in the
node pointer to of_property_*().
The same applies to of_property_*() which fails when invoked with a NULL
node pointer.
[ tglx: Massaged change log ]
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240603125652.791601-1-ruanjinjie@huawei.com
Introduce the advanced extended interrupt controllers. This feature will
allow each core to have 256 independent interrupt vectors and MSI
interrupts can be independently routed to any vector on any CPU.
[ tglx: Fixed up coding style. Made on/offline functions void ]
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Co-developed-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240604125026.18745-1-zhangtianyang@loongson.cn
The doorbell interrupts have the following layout on IPI vs no-IPI
platforms:
| 0...7 | 8...15 | 16...31 |
------------------+---------+----------+---------------------+
IPI platform | IPI | n/a | MSI |
------------------+---------+----------+---------------------+
non-IPI platform | MSI |
------------------+------------------------------------------+
Currently the driver only allows for the upper 16...31 interrupts for
MSI domain (i.e. the MSI domain has only 16 interrupts).
On platforms where IPI is not available, we can use whole 32 MSI
interrupts.
Implement support also for the lower 16 MSI interrupts on non-IPI
platforms.
[ Marek: refactored, changed commit message ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
On platforms where IPI is not available in the MPIC, the IPI registers
instead represent an additional set of MSI interrupt registers (currently
unused by the driver).
Do not touch these registers on platforms where IPI is not available in the
MPIC.
[ Marek: refactored, changed commit message ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
IPI is available only on systems where the mpic controller does not have a
parent interrupt defined (e.g. on Armada XP). If a parent interrupt is
defined, inter-processor interrupts are handled by an interrupt controller
higher in the hierarchy (most probably a parent GIC).
Only call ipi_resume() on systems where IPI is available in the mpic
controller.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
[ refactored a little and changed commit message ]
IRQs 0 (IPI) and 1 (MSI) are handled internally by this driver,
generic_handle_domain_irq() is never called for these IRQs.
Disallow mapping these IRQs.
[ Marek: changed commit message ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Use the dedicated atomic_io_modify() instead of a open coded spin_lock() +
readl() + writel() + spin_unlock() sequence.
This allows to drop the irq_controller_lock spinlock from the driver.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/irqchip/irq-ts4800.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/irqchip/irq-meson-gpio.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE(). This includes a 3rd file,
irq-mvebu-pic.c, which did not produce a warning with the x86
allmodconfig, but which may cause this warning with other kernel
configurations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240608-md-drivers-irqchip-v1-1-dd02c3229277@quicinc.com
The order of function calls in the disable operation should be the reverse
of that in the enable operation. Thus, reorder the function calls to first
disable the parent IRQ chip before disabling the TINT IRQ.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://lore.kernel.org/r/20240606194813.676823-1-prabhakar.mahadev-lad.rj@bp.renesas.com
The liointc hardware provides separate Interrupt Status Registers (ISR) for
each core. The current code uses always the ISR of core #0, which works
during boot because by default all interrupts are routed to core #0.
When the interrupt routing changes in the firmware configuration then this
causes interrupts to be lost because they are not configured in the
corresponding core.
Use the core index to access the correct ISR instead of a hardcoded 0.
[ tglx: Massaged changelog ]
Fixes: 0858ed035a ("irqchip/loongson-liointc: Add ACPI init support")
Co-developed-by: Tianli Xiong <xiongtianli@loongson.cn>
Signed-off-by: Tianli Xiong <xiongtianli@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240622043338.1566945-1-chenhuacai@loongson.cn
Multi-bridge machines required that all eiointc controllers in the system
are initialized, otherwise the system does not boot.
The initialization happens on the boot CPU during early boot and relies on
cpu_to_node() for identifying the individual nodes.
That works when the number of possible CPUs is large enough, but with a
command line limit, e.g. "nr_cpus=$N" for kdump, but fails when the CPUs
of the secondary nodes are not covered.
During early ACPI enumeration all CPU to node mappings are recorded up to
CONFIG_NR_CPUS. These are accessible via early_cpu_to_node() even in the
case that "nr_cpus=N" truncates the number of possible CPUs and only
provides the possible CPUs via cpu_to_node() translation.
Change the node lookup in the driver to use early_cpu_to_node() so that
even with a limitation on the number of possible CPUs all eointc instances
are initialized.
This can't obviously cure the case where CONFIG_NR_CPUS is too small.
[ tglx: Massaged changelog ]
Fixes: 64cc451e45 ("irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240623034113.1808727-1-chenhuacai@loongson.cn
The two functions riscv_intc_aia_irq() and riscv_intc_irq()
are only called by C functions.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240614151955.1949-1-jszhang@kernel.org
The Microchip LAN966x outband interrupt controller (OIC) maps the
internal interrupt sources of the LAN966x device to an external
interrupt.
When the LAN966x device is used as a PCI device, the external interrupt
is routed to the PCI interrupt.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-23-herve.codina@bootlin.com
The GIC architecture specification defines a set of registers for
redistributors and ITSes that control the sharebility and cacheability
attributes of redistributors/ITSes initiator ports on the interconnect
(GICR_[V]PROPBASER, GICR_[V]PENDBASER, GITS_BASER<n>).
Architecturally the GIC provides a means to drive shareability and
cacheability attributes signals but it is not mandatory for designs to
wire up the corresponding interconnect signals that control the
cacheability/shareability of transactions.
Redistributors and ITSes interconnect ports can be connected to
non-coherent interconnects that are not able to manage the
shareability/cacheability attributes; this implicitly makes the
redistributors and ITSes non-coherent observers.
To enable non-coherent GIC designs on ACPI based systems, parse the MADT
GICC/GICR/ITS subtables non-coherent flags to determine whether the
respective components are non-coherent observers and force the
shareability attributes to be programmed into the redistributors and
ITSes registers.
An ACPI global function (acpi_get_madt_revision()) is added to retrieve
the MADT revision, in that it is essential to check the MADT revision
before checking for flags that were added with MADT revision 7 so that
if the kernel is booted with an ACPI MADT table with revision < 7 it
skips parsing the newly added flags (that should be zeroed reserved
values for MADT versions < 7 but they could turn out to be buggy and
should be ignored).
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20240606094238.757649-2-lpieralisi@kernel.org
The IX45 block has additional mask registers (NMSK/IMSK/TMSK) compared
to the RZ/G2L (family) SoC.
A new rzfive_irqc_chip irq_chip is introduced for RZ/Five, where function
pointers for irq_[un]mask() and irq_[dis|en]able() handle the ([un]masking
of the interrupts. The irq_chip pointer is now passed as an init callback
and stored in the priv pointer to differentiate between RZ/G2L and RZ/Five.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240604173710.534132-3-prabhakar.mahadev-lad.rj@bp.renesas.com
its_vlpi_prop_update() calls lpi_write_config() which obtains the
mapping information for a VLPI without lock held. So it could race
with its_vlpi_unmap().
Since all calls from its_irq_set_vcpu_affinity() require the same
lock to be held, hoist the locking there instead of sprinkling the
locking all over the place.
This bug was discovered using Coverity Static Analysis Security Testing
(SAST) by Synopsys, Inc.
[ tglx: Use guard() instead of goto ]
Fixes: 015ec0386a ("irqchip/gic-v3-its: Add VLPI configuration handling")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240531162144.28650-1-hagarhem@amazon.com
Now that the PLIC uses a platform driver, the driver is probed later in the
boot process, where interrupts from peripherals might already be pending.
As a result, plic_handle_irq() may be called as early as the call to
irq_set_chained_handler() completes. But this call happens before the
per-context handler is completely set up, so there is a window where
plic_handle_irq() can see incomplete per-context state and crash.
Avoid this by delaying the call to irq_set_chained_handler() until all
handlers from all PLICs are initialized.
Fixes: 8ec99b0331 ("irqchip/sifive-plic: Convert PLIC driver into a platform driver")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240529215458.937817-1-samuel.holland@sifive.com
Closes: https://lore.kernel.org/r/CAMuHMdVYFFR7K5SbHBLY-JHhb7YpgGMS_hnRWm8H0KD-wBo+4A@mail.gmail.com/
- Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the lockup
detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to retrieve
the delta to the snapshot. Use this new mechanism in the watchdog code
to do a two stage lockup analysis by taking the snapshot and printing
the deltas for the topmost active interrupts on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the global
counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that they
are not delivered before the system resumes the device drivers when
coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU are
migrated to a different CPU in the affinity mask. This can fail when
the CPUs have no vectors left. Instead of giving up try to migrate it
to any online CPU and thereby breaking the affinity setting in order to
prevent a stale device interrupt which targets an offline CPU
- The usual small cleanups
- Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=jFLf
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the
lockup detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to
retrieve the delta to the snapshot. Use this new mechanism in the
watchdog code to do a two stage lockup analysis by taking the
snapshot and printing the deltas for the topmost active interrupts
on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the
global counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that
they are not delivered before the system resumes the device drivers
when coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU
are migrated to a different CPU in the affinity mask. This can fail
when the CPUs have no vectors left. Instead of giving up try to
migrate it to any online CPU and thereby breaking the affinity
setting in order to prevent a stale device interrupt which targets
an offline CPU
- The usual small cleanups
Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place"
* tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc
cpuidle: Avoid explicit cpumask allocation on stack
irqchip/sifive-plic: Avoid explicit cpumask allocation on stack
irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack
irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack
irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack
irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack
cpumask: Introduce cpumask_first_and_and()
irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown
genirq: Reuse irq_is_nmi()
genirq/cpuhotplug: Retry with cpu_online_mask when migration fails
genirq/cpuhotplug: Skip suspended interrupts when restoring affinity
arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251
arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251
ARM: dts: stm32: List exti parent interrupts on stm32mp131
ARM: dts: stm32: List exti parent interrupts on stm32mp151
arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32
irqchip/stm32-exti: Mark events reserved with RIF configuration check
irqchip/stm32-exti: Skip secure events
irqchip/stm32-exti: Convert driver to standard PM
...
This BUG_ON() is useless, because the same effect will be obtained
by letting the code run its course and vm being dereferenced,
triggering an exception.
So just remove this check.
Signed-off-by: Guanrui Huang <guanrui.huang@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240418061053.96803-3-guanrui.huang@linux.alibaba.com
The error handling path in its_vpe_irq_domain_alloc() causes a double free
when its_vpe_init() fails after successfully allocating at least one
interrupt. This happens because its_vpe_irq_domain_free() frees the
interrupts along with the area bitmap and the vprop_page and
its_vpe_irq_domain_alloc() subsequently frees the area bitmap and the
vprop_page again.
Fix this by unconditionally invoking its_vpe_irq_domain_free() which
handles all cases correctly and by removing the bitmap/vprop_page freeing
from its_vpe_irq_domain_alloc().
[ tglx: Massaged change log ]
Fixes: 7d75bbb4bc ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown")
Signed-off-by: Guanrui Huang <guanrui.huang@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240418061053.96803-2-guanrui.huang@linux.alibaba.com
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_first_and_and() to avoid the need for a temporary cpumask on
the stack.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240416085454.3547175-7-dawei.li@shingroup.cn
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_first_and_and() to avoid the need for a temporary cpumask on
the stack.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240416085454.3547175-6-dawei.li@shingroup.cn
