sdca_lookup_functions may be called by a Peripheral that is not listed
in the ACPI table. Testing adev is required to avoid kernel NULL pointer
dereference.
Fixes: 3a513da1ae33 ("ASoC: SDCA: add initial module")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241113064133.162501-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable ret is being assigned a zero value however the value is
never read because ret is being re-assigned later after the end of
the switch statement. The assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20241113130807.1386754-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simple Card Utils has simple_util_dai which is paired to snd_soc_dai,
and assmus that CPU/Codec DAI and its paired simple_util_dai are same
order for CPU/Codec
simple_util_dai[0] <--> snd_soc_dai[0]
simple_util_dai[1] <--> snd_soc_dai[1]
...
So, it is using same index in for_each loop.
(X) gets simple_util_dai
(Y) gets snd_soc_dai
(Y) for_each_rtd_cpu_dais(.., i, ..) {
(X)(A) udai = simple_props_to_dai_cpu(.., i);
}
(X) for_each_prop_dai_cpu(.., i, ...) {
(Y) dai = snd_soc_rtd_to_cpu(.., i);
...
}
But current Simple Card Utils didn't have simple_util_dai for
dummy DAI. So above (A) will get NULL pointer in such case.
This patch cares simple_util_dai for dummy DAI.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msi5maz3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no reason to limit the supported rates of the test component
to specific ones as if it's a real piece of hardware. Set the rates to
continuous to aid in testing different rates.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://patch.msgid.link/20241112-alsa_test_rates-v1-1-95cf529db871@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix an issue detected by the Smatch tool:
sound/soc/sof/ipc4-pcm.c: sof_ipc4_pcm_dai_link_fixup_rate()
error: uninitialized symbol 'be_rate'.
The warning highlights a case where `be_rate` could remain uninitialized
if `num_input_formats` is zero, which would cause undefined behavior
when setting `rate->min` and `rate->max` based on `be_rate`.
To address this issue, a `WARN_ON_ONCE(!num_input_formats)` check was
added to ensure `num_input_formats` is greater than zero. If this
condition fails, the function returns `-EINVAL`, preventing the use of
an uninitialized `be_rate`.
This change improves the robustness of the function by catching an
invalid state early and providing better feedback during development.
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://patch.msgid.link/20241107063609.11627-1-surajsonawane0215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai has rate/channels/sample_bits parameter, but it is only valid
if symmetry is being enforced by symmetric_xxx flag on driver.
It is very difficult to know about it from current naming, and easy to
misunderstand it. add symmetric_ prefix for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfmd8bnf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This codec only has one set of left and right DACs, remove the duplicate
DACs with duplicated bits controlling them as the userspace can set those
controls to mismatched value. This most likely does break userspace ABI,
but there seem to be no in-kernel users.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20241108235453.196289-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
A recent attempt to fix a missing symbol when
CONFIG_SND_SOC_SDCA=m and CONFIG_SND_SOC_ACPI_INTEL_SDCA_QUIRKS=y
caused unmet direct dependency warning with randconig.
The reason is that SND_SOC_ACPI_INTEL_MATCH is needed to be compilable
even if ACPI is not selected, modules have dependency on exported
symbols from it.
The only solution for these kconfig dependencies seams to be to
only select SND_SOC_SDCA if ACPI is enabled from
SND_SOC_ACPI_INTEL_SDCA_QUIRKS.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: Intel: Kconfig: Only select SND_SOC_SDCA if ACPI is enabled
ASoC: Intel: Kconfig: Revert make SND_SOC_ACPI_INTEL_MATCH depend on
ACPI
sound/soc/intel/Kconfig | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--
2.47.0
Add handling of clock related to secondary MI2S_RX in
sm8250_snd_startup().
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20241018025452.1362293-2-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The acpi-intel-match should be compiled even if ACPI is not selected.
The ACPI is not compile time requirement, but the exported symbols are
needed for other modules.
Fixes: b6bd3f3b6357 ("ASoC: Intel: Kconfig: make SND_SOC_ACPI_INTEL_MATCH depend on ACPI")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411070806.UhCRpZok-lkp@intel.com/
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241107100204.24952-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA module have hard dependency to compile on ACPI, it can only be
selected if ACPI is also enabled.
The SDCA header provides inline prototypes for other modules to compile in
case SND_SOC_SDCA is not enabled.
Fixes: 845cb1ddf1fc ("ASoC: Intel: Kconfig: select SND_SOC_SDCA by SND_SOC_ACPI_INTEL_SDCA_QUIRKS")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411070806.UhCRpZok-lkp@intel.com/
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241107100204.24952-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function sma1307_dai_hw_params_amp, the variable
'ret' has not been assigned a value, so the logical judgement
is invalid, thus fix it.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241108011617.2284-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add STM32MP25 support for STM32 I2S.
On STM32MP25 the I2S driver does not manage I2S kernel clock rate
by choosing its parent clock, depending on audio stream rate.
The driver requests a rate change on I2S kernel clock instead.
It tries to set the higher possible rate, which is a multiple of
the audio stream rate and which gives an accuracy of at least 1000 ppm.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20241107144712.1305638-3-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add STM32MP25 support for STM32 SAI.
On STM32MP25 the SAI driver does not manage SAI kernel clock rate
by chosing its parent clock, dependending on audio stream rate.
The driver requests a rate change on SAI kernel clock instead.
This rate change is performed with the following guidelines:
- Chose highest rate multiple of the audio stream
(Try to get clock accuracy within 1000 ppm)
- Ensure clock rate compatibility between SAI sub-blocks A&B
and between instances sharing the same flexgen.
Use clk_rate_exclusive API to fulfill this requirement.
The STM32 SAI peripheral does not support the DMA burst mode
on STM32MP25. Add a field in compatible structure to manage DMA
burst support capability.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20241107155143.1340523-3-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The PROBE_INFO (ext_manifest type 3) is not used by the kernel, but
at every tiem the firmware is loaded the following is printed in
info level (user visible):
unknown sof_ext_man header type 3 size 0x30
The type is known, but it is not handled, the print is misleading.
In the function ux500_msp_drv_probe, the 'int' type cast
in front of the PTR_ERR() macro is redundant, thus remove
it.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241107075440.2770-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_dai_suspend() was added to handle paused stream during system
suspend. But as a side effect, it also ends up cleaning up the DMA
data for those streams that were prepared but not triggered before a
system suspend. Since these streams will not receive the prepare
callback after resuming, we need to preserve the DMA data during suspend.
So, add the check to handle only those streams that are in the paused
state to avoid losing the DMA data for all other streams.
Link: https://github.com/thesofproject/linux/issues/5080
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20241107134957.25160-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It has been reported that the DMA memory allocation for firmware download
can fail after extended period of uptime on systems with relatively small
amount of RAM when the system memory becomes fragmented.
The issue primarily happens when the system is waking up from system
suspend, swap might not be available and the MM system cannot move things
around to allow for successful allocation.
If the IMR boot is not supported then for each DSP boot we would need to
allocate the DMA buffer for firmware transfer, which can increase the
chances of the issue to be hit.
This patch adds support for allocating the DMA buffers once at first boot
time and keep it until the system is shut down, rebooted or the drivers
re-loaded and makes this as the default operation.
With persistent_cl_buffer module parameter the persistent Code Loader
DMA buffer can be disabled to fall back to on demand allocation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20241107121440.1472-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDA specification states that the SDnLVI (Last Valid Index) must be at
least 1 (two BDLE entry).
Update the debug prints as well to provide better information.
While the LVI=0 worked so far without issues, it is better to align with
the specification to avoid unforeseen issues with FW loading.
Notes:
- The LVI > 0 rules is valid and honored for audio use cases
- LVI == 0 is used with software controlled (SPIB) transfers only for
firmware and library loading, which is permitted by the hardware
- This is not spelled out in the specification and it is better to avoid
cases
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241107121532.3241-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Every time when the firmware is loaded we see the following printed in
info level:
unknown sof_ext_man header type 3 size 0x30
This is the PROBE_INFO element, which is not parsed, but it is not
something that we should treat as surprise, aka unknown type.
Add an empty case with a debug print to 'handle' this ext_manifest type and
silence the confusing print in kernel log.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20241107120306.30680-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Fix the ld.lld: error: undefined symbol: sdca_device_quirk_match issue
when CONFIG_SND_SOC_SDCA=m and CONFIG_SND_SOC_ACPI_INTEL_SDCA_QUIRKS=y.
According to DA7212 HW manual, the codec's PLL input divider can operate
with MCLK range from 2MHz to 50MHz but current driver only set the
minimum supported MCLK frequency to 5MHz. That cause 11.025kHz audio
which is corresponding to MCLK of 2.8224MHz (11.025kHz * 256) unable to
play in case audio-simple-card is used.
Signed-off-by: Hao Bui <hao.bui.yg@renesas.com>
Co-developed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241106081826.1211088-27-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When audio stream is closing, audio frequency is set to 0 by ALSA but
codec driver DA7213 does not handle properly in this case. This patch
adds checking of 0Hz frequency to da7213_set_component_sysclk() and avoid
unnecessary PLL settings.
Signed-off-by: Hao Bui <hao.bui.yg@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241106081826.1211088-26-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return directly the value of the regcache_sync() in
da7213_runtime_resume(). In case of any failures this will inform the
runtime resume process.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241106081826.1211088-24-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the Renesas RZ/G3S SMARC Carrier II board having a DA7212 codec (using
da7213 driver) connected to one SSIF-2 available on the Renesas RZ/G3S SoC
it has been discovered that using the runtime PM API for suspend/resume
(as will be proposed in the following commits) leads to the codec not
being propertly initialized after resume. This is because w/o
max_register populated to regmap_config the regcache_rbtree_sync()
breaks on base_reg > max condition and the regcache_sync_block() call is
skipped.
Fixes: ef5c2eba2412 ("ASoC: codecs: Add da7213 codec")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241106081826.1211088-23-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_SDCA can't be optional when SND_SOC_ACPI_INTEL_SDCA_QUIRKS is
selected. IS_REACHABLE can prevent the link error. However it is not
suitable for this case. When CONFIG_SND_SOC_ACPI_INTEL_SDCA_QUIRKS is
Y and CONFIG_SND_SOC_SDCA is M, the SDCA helpers will be empty and
return false. But we need the helpers to do their jobs whenSND_SOC_SDCA
is M.
IOW, the SDCA library is not optional for Intel platforms where the
SDCA_QUIRK is selected.
Also, make SND_SOC_SDCA invisible. SND_SOC_SDCA should be selected if
a device supports SDCA. User should not unselect it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411021722.DiX1Y5sf-lkp@intel.com/
Suggested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241106055810.10123-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_ACPI_INTEL_MATCH relies on ACPI functions. It will not work
if ACPI is not selected.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241106055810.10123-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from wangweidong.a@awinic.com:
Add the awinic,aw88081 property to support the aw88081 chip.
The driver is for amplifiers aw88081 of Awinic Technology
Corporation. The awinic AW88081 is an I2S/TDM input,
high efficiency digital Smart K audio amplifier
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series refactors the SoundWire dai link init logic for Intel
and AMD generic SoundWire machine driver and also updates the stream_name
in dai_links structure.
Link: https://github.com/thesofproject/linux/pull/5218
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
rtd has own ID, but it is naming "num" for it. The naming is confusable.
This patch rename it to "id".
And many functions request both "rtd" and its "id" as function parameter,
but rtd itself has rtd->id. This patch cleanup it.
And, Qcom driver want to use irregular rtd ID because of its topology,
and thus, soc-core need irregular calculation. I'm not sure why only Qcom
needs such calculation, but this patch also cleanup it.
But I guess we want to cleanup is not soc-core but Qcom side (?)
Add missing quirks for some new Dell laptops using cs42l43's speaker
outputs.
Signed-off-by: Deep Harsora <deep_harsora@dell.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20241105111057.182076-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add OF device ID entry for SM8750 sound card with its own model name,
used to load proper Audioreach topology file. The sound card is
compatible with SM8450 and newer family.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241101165159.370619-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX95, the MQS module in Always-on (AON) domain only can
be accessed by System Controller Management Interface (SCMI)
MISC Protocol. So define a specific regmap_config for the case.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20241025062935.1071408-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix an issue detected by the Smatch tool:
sound/soc/bcm/bcm63xx-pcm-whistler.c:264 i2s_dma_isr()
error: uninitialized symbol 'val_1'.
sound/soc/bcm/bcm63xx-pcm-whistler.c:264 i2s_dma_isr()
error: uninitialized symbol 'val_2'.
These errors were triggered because the variables 'val_1' and 'val_2'
could remain uninitialized if 'offlevel' is zero, meaning the loop
that assigns values to them does not execute. In this case,
'dma_addr_next' would use uninitialized data, potentially leading
to undefined behavior.
To resolve this, a conditional update for 'dma_addr_next' is added,
ensuring it is assigned only when 'val_1' and 'val_2' are read.
A new boolean variable 'val_read' flags when the values have been
retrieved, setting 'dma_addr_next' only if valid data is available.
This solution prevents the use of uninitialized data, maintaining
defined behavior for 'dma_addr_next' in all cases, and aligns with
expected usage of I2S RX descriptor data.
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://patch.msgid.link/20241102123630.25446-1-surajsonawane0215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An atomicity violation occurs when the validity of the variables
da7219->clk_src and da7219->mclk_rate is being assessed. Since the entire
assessment is not protected by a lock, the da7219 variable might still be
in flux during the assessment, rendering this check invalid.
To fix this issue, we recommend adding a lock before the block
if ((da7219->clk_src == clk_id) && (da7219->mclk_rate == freq)) so that
the legitimacy check for da7219->clk_src and da7219->mclk_rate is
protected by the lock, ensuring the validity of the check.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations.
Fixes: 6d817c0e9fd7 ("ASoC: codecs: Add da7219 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Link: https://patch.msgid.link/20240930101216.23723-1-chenqiuji666@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Qualcomm X1E laptops have only two speakers. Regardless whether
this sound card driver is suitable for them (we could re-use one for
some older SoC), we should set reasonable channel map depending on the
number of channels, not always 4-speaker setup.
This change is necessary for bringing audio support on Lenovo Thinkpad
T14s with Qualcomm X1E78100 and only two speakers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241023124152.130706-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
some functions had parameter like below
xxx(..., rtd, ..., id);
This "id" is rtd->id. We don't need to have "id" on each functions
because we can get it from "rtd". Let's cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plnqb84p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
qcom/qdsp6 want to use irregular rtd->id because of its topology.
Current code is calculating it at soc_init_pcm_runtime() which calls
soc_new_pcm(), and it doesn't save it to rtd->id.
Let's calculate and save it to rtd at snd_soc_add_pcm_runtime()
which create rtd and connect related components.
But, this feature should be implemented by using "dai_link" instead
of "component". Add FIXME as comment.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87r086b84w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
