Introduce region-third (PUD) and segment table (PMD) swap entries, and
make hugetlbfs RSTE <-> PTE conversion code aware of them, so that they
can be used for hugetlbfs PTE_MARKER entries. Future work could also
build on this to enable THP_SWAP and THP_MIGRATION for s390.
Similar to PTE swap entries, bits 0-51 can be used to store the swap
offset, but bits 57-61 cannot be used for swap type because that overlaps
with the INVALID and TABLE TYPE bits. PMD/PUD swap entries must be invalid,
and have a correct table type so that pud_folded() check still works.
Bits 53-57 can be used for swap type, but those include the PROTECT bit.
So unlike swap PTEs, the PROTECT bit cannot be used to mark the swap entry.
Use the "Common-Segment/Region" bit 59 instead for that.
Also remove the !MACHINE_HAS_NX check in __set_huge_pte_at(). Otherwise,
that would clear the _SEGMENT_ENTRY_NOEXEC bit also for swap entries, where
it is used for encoding the swap type. The architecture only requires this
bit to be 0 for PTEs, with !MACHINE_HAS_NX, not for segment or region-third
entries. And the check is also redundant, because after __pte_to_rste()
conversion, for non-swap PTEs it would only be set if it was already set in
the PTE, which should never be the case for !MACHINE_HAS_NX.
This is a prerequisite for hugetlbfs PTE_MARKER support on s390, which
is needed to fix a regression introduced with commit 8a13897fb0
("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs"). That commit
depends on the availability of swap entries for hugetlbfs, which were
not available for s390 so far.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce region-third and segment table entry present SW bits, and adjust
pmd/pud_present() accordingly.
Also add pmd/pud_present() checks to pmd/pud_leaf(), to return false for
future swap entries. Same logic applies to pmd_trans_huge(), make that
return pmd_leaf() instead of duplicating the same check.
huge_pte_offset() also needs to be adjusted, current code would return
NULL for !pud_present(). Use the same logic as in the generic version,
which allows for !pud_present() swap entries.
Similar to PTE, bit 63 can be used for the new SW present bit in region
and segment table entries. For segment-table entries (PMD) the architecture
says that "Bits 62-63 are available for programming", so they are safe to
use. The same is true for large leaf region-third-table entries (PUD).
However, for non-leaf region-third-table entries, bits 62-63 indicate the
TABLE LENGTH and both must be set to 1. But such entries would always be
considered as present, so it is safe to use bit 63 as PRESENT bit for PUD.
They also should not conflict with bit 62 potentially later used for
preserving SOFT_DIRTY in swap entries, because they are not swap entries.
Valid PMDs / PUDs should always have the present bit set, so add it to
the various pgprot defines, and also _SEGMENT_ENTRY which is OR'ed e.g.
in pmd_populate(). _REGION3_ENTRY wouldn't need any change, as the present
bit is already included in the TABLE LENGTH, but also explicitly add it
there, for completeness, and just in case the bit would ever be changed.
gmap code needs some adjustment, to also OR the _SEGMENT_ENTRY, like it
is already done gmap_shadow_pgt() when creating new PMDs, but not in
__gmap_link(). Otherwise, the gmap PMDs would not be considered present,
e.g. when using pmd_leaf() checks in gmap code. The various WARN_ON
checks in gmap code also need adjustment, to tolerate the new present
bit.
This is a prerequisite for hugetlbfs PTE_MARKER support on s390, which
is needed to fix a regression introduced with commit 8a13897fb0
("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs"). That commit
depends on the availability of swap entries for hugetlbfs, which were
not available for s390 so far.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Rearrange region-third and segment table entry SW bits, in order to
make room for future encoding of region/segment table swap entries.
Also adjust _SEGMENT_ENTRY_GMAP_UC and _SEGMENT_ENTRY_GMAP_IN bits in
gmap code. Those should only apply for gmap PMDs, and not really depend
on or conflict with host PMD bits, but for consistency also adjust them:
- _SEGMENT_ENTRY_GMAP_UC "dirty (migration)" was using the same bit as
_SEGMENT_ENTRY_SOFT_DIRTY in the host PMD -> make it use the new
SOFT_DIRTY bit 63 (0x0002)
- _SEGMENT_ENTRY_GMAP_IN "invalidation notify bit" was using 0x8000,
which was an unused bit in the host PMD, that is now used for
_SEGMENT_ENTRY_WRITE -> make it use bit 52 (0x0800) instead, which is
still unused in the host PMD
This is a prerequisite for hugetlbfs PTE_MARKER support on s390, which
is needed to fix a regression introduced with commit 8a13897fb0
("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs"). That commit
depends on the availability of swap entries for hugetlbfs, which were
not available for s390 so far.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
kvm_s390_update_topology_change_report() modifies a single bit within
sca_utility using cmpxchg(). Given that the size of the sca_utility union
is two bytes this generates very inefficient code. Change the size to four
bytes, so better code can be generated.
Even though the size of sca_utility doesn't reflect architecture anymore
this seems to be the easiest and most pragmatic approach to avoid
inefficient code.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241126102515.3178914-4-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Within sca_clear_ext_call() cmpxchg() is used to clear one or two bytes
(depending on sca format). The cmpxchg() calls are not supposed to fail; if
so that would be a bug. Given that cmpxchg() usage on one and two byte
areas generates very inefficient code, replace them with block concurrent
WRITE_ONCE() calls, and remove the WARN_ON().
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241126102515.3178914-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Convert all cmpxchg() loops to try_cmpxchg() loops. With gcc 14 and the
usage of flag output operands in try_cmpxchg() this allows the compiler to
generate slightly better code.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241126102515.3178914-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The result of xchg() is not used, and in addition it is used on a one byte
memory area which leads to inefficient code.
Use WRITE_ONCE() instead to achieve the same result with much less
generated code.
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This reverts commit 2a010c4128.
Rui Ueyama <rui314@gmail.com> writes:
> I'm the creator and the maintainer of the mold linker
> (https://github.com/rui314/mold). Recently, we discovered that mold
> started causing process crashes in certain situations due to a change
> in the Linux kernel. Here are the details:
>
> - In general, overwriting an existing file is much faster than
> creating an empty file and writing to it on Linux, so mold attempts to
> reuse an existing executable file if it exists.
>
> - If a program is running, opening the executable file for writing
> previously failed with ETXTBSY. If that happens, mold falls back to
> creating a new file.
>
> - However, the Linux kernel recently changed the behavior so that
> writing to an executable file is now always permitted
> (https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2a010c412853).
>
> That caused mold to write to an executable file even if there's a
> process running that file. Since changes to mmap'ed files are
> immediately visible to other processes, any processes running that
> file would almost certainly crash in a very mysterious way.
> Identifying the cause of these random crashes took us a few days.
>
> Rejecting writes to an executable file that is currently running is a
> well-known behavior, and Linux had operated that way for a very long
> time. So, I don’t believe relying on this behavior was our mistake;
> rather, I see this as a regression in the Linux kernel.
Quoting myself from commit 2a010c4128 ("fs: don't block i_writecount during exec")
> Yes, someone in userspace could potentially be relying on this. It's not
> completely out of the realm of possibility but let's find out if that's
> actually the case and not guess.
It seems we found out that someone is relying on this obscure behavior.
So revert the change.
Link: https://github.com/rui314/mold/issues/1361
Link: https://lore.kernel.org/r/4a2bc207-76be-4715-8e12-7fc45a76a125@leemhuis.info
Cc: <stable@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Intel SoundWire machine driver always uses Pin number 2 and above.
Currently, the pin number is used as the FW DAI index directly. As a
result, FW DAI 0 and 1 are never used. That worked fine because we use
up to 2 DAIs in a SDW link. Convert the topology pin index to ALH dai
index, the mapping is using 2-off indexing, iow, pin #2 is ALH dai #0.
The issue exists since beginning. And the Fixes tag is the first commit
that this commit can be applied.
Fixes: b66bfc3a98 ("ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241127092955.20026-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following commit 13f58267cd ("ASoC: soc.h: don't create dummy
Component via COMP_DUMMY()"), COMP_DUMMY() became an array with zero
length, and only gets populated with the dummy struct after the card is
registered. Since the sound card driver's probe happens before the card
registration, accessing any of the members of a dummy component during
probe will result in undefined behavior.
This can be observed in the mt8188 and mt8195 machine sound drivers. By
omitting a dai link subnode in the sound card's node in the Devicetree,
the default uninitialized dummy codec is used, and when its dai_name
pointer gets passed to strcmp() it results in a null pointer dereference
and a kernel panic.
In addition to that, set_card_codec_info() in the generic helpers file,
mtk-soundcard-driver.c, will populate a dai link with a dummy codec when
a dai link node is present in DT but with no codec property.
The result is that at probe time, a dummy codec can either be
uninitialized with num_codecs = 0, or be an initialized dummy codec,
with num_codecs = 1 and dai_name = "snd-soc-dummy-dai". In order to
accommodate for both situations, check that num_codecs is not zero
before accessing the codecs' fields but still check for the codec's dai
name against "snd-soc-dummy-dai" as needed.
While at it, also drop the check that dai_name is not null in the mt8192
driver, introduced in commit 4d4e1b6319 ("ASoC: mediatek: mt8192:
Check existence of dai_name before dereferencing"), as it is actually
redundant given the preceding num_codecs != 0 check.
Fixes: 13f58267cd ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Acked-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://patch.msgid.link/20241126-asoc-mtk-dummy-panic-v1-1-42d53e168d2e@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add condition check to register ACP PDM sound card by reading
_WOV acpi entry.
Fixes: 5426f506b5 ("ASoC: amd: Add support for enabling DMIC on acp6x via _DSD")
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20241127112227.227106-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes a coding style issue in the alignment of parameters
in the function i2c_smbus_write_bytes(). It replaces spaces with tabs for
alignment, as per the coding style guidelines.
Signed-off-by: Liam Zuiderhoek <zuiderhoekl@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Instead of having them all available, mark them all as "fail-needs-probe"
and have the implementation try to probe which one is present.
Also remove the shared resource workaround by moving the pinctrl entry
for the trackpad interrupt line back into the individual trackpad nodes.
Cc: <stable+noautosel@kernel.org> # Needs accompanying new driver to work
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular device
can be detected by some firmware provided identifier, other times that
information is not available, and the kernel has to try to probe each
device.
This change attempts to make the "probe each device" case cleaner. The
current approach is to have all options added and enabled in the device
tree. The kernel would then bind each device and run each driver's probe
function. This works, but has been broken before due to the introduction
of asynchronous probing, causing multiple instances requesting "shared"
resources, such as pinmuxes, GPIO pins, interrupt lines, at the same
time, with only one instance succeeding. Work arounds for these include
moving the pinmux to the parent I2C controller, using GPIO hogs or
pinmux settings to keep the GPIO pins in some fixed configuration, and
requesting the interrupt line very late. Such configurations can be seen
on the MT8183 Krane Chromebook tablets, and the Qualcomm sc8280xp-based
Lenovo Thinkpad 13S.
Instead of this delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component prober. For any given
class of devices on the same I2C bus, it will go through all of them,
doing a simple I2C read transfer and see which one of them responds.
It will then enable the device that responds.
This requires some minor modifications in the existing device tree.
The status for all the device nodes for the component options must be
set to "fail-needs-probe". This makes it clear that some mechanism is
needed to enable one of them, and also prevents the prober and device
drivers running at the same time.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add GPIO support to the simple helpers for the I2C OF component prober.
Components that the prober intends to probe likely require their
regulator supplies be enabled, and GPIOs be toggled to enable them or
bring them out of reset before they will respond to probe attempts.
Regulator supplies were handled in the previous patch.
The assumption is that the same class of components to be probed are
always connected in the same fashion with the same regulator supply
and GPIO. The names may vary due to binding differences, but the
physical layout does not change.
This supports at most one GPIO pin. The user must specify the GPIO name,
the polarity, and the amount of time to wait after the GPIO is toggled.
Devices with more than one GPIO pin likely require specific power
sequencing beyond what generic code can easily support.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add helpers to do regulator management for the I2C OF component prober.
Components that the prober intends to probe likely require their
regulator supplies be enabled, and GPIOs be toggled to enable them or
bring them out of reset before they will respond to probe attempts.
GPIOs will be handled in the next patch.
The assumption is that the same class of components to be probed are
always connected in the same fashion with the same regulator supply
and GPIO. The names may vary due to binding differences, but the
physical layout does not change.
This set of helpers supports at most one regulator supply. The user
must specify the node from which the supply is retrieved. The supply
name and the amount of time to wait after the supply is enabled are
also given by the user.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular device
can be detected by some firmware provided identifier, other times that
information is not available, and the kernel has to try to probe each
device.
This change attempts to make the "probe each device" case cleaner. The
current approach is to have all options added and enabled in the device
tree. The kernel would then bind each device and run each driver's probe
function. This works, but has been broken before due to the introduction
of asynchronous probing, causing multiple instances requesting "shared"
resources, such as pinmuxes, GPIO pins, interrupt lines, at the same
time, with only one instance succeeding. Work arounds for these include
moving the pinmux to the parent I2C controller, using GPIO hogs or
pinmux settings to keep the GPIO pins in some fixed configuration, and
requesting the interrupt line very late. Such configurations can be seen
on the MT8183 Krane Chromebook tablets, and the Qualcomm sc8280xp-based
Lenovo Thinkpad 13S.
Instead of this delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them responds.
It will then enable the device that responds.
This requires some minor modifications in the existing device tree. The
status for all the device nodes for the component options must be set
to "fail-needs-probe". This makes it clear that some mechanism is
needed to enable one of them, and also prevents the prober and device
drivers running at the same time.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
There are cases where drivers would go through child device nodes and
operate on only the ones whose node name starts with a given prefix.
Provide a helper for these users. This will mainly be used in a
subsequent patch that implements a hardware component prober for I2C
busses.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add a helper function to add string property updates to an OF changeset.
This is similar to of_changeset_add_prop_string(), but instead of adding
the property (and failing if it exists), it will update the property.
This shall be used later in the DT hardware prober.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The m1.0 field of UMP Function Block info specifies whether the given
FB is a MIDI 1.0 port or not. When implementing the UMP support on
Linux, I somehow interpreted as if it were bit flags, but the field is
actually an enumeration from 0 to 2, where 2 means MIDI 1.0 *and* low
speed.
This patch corrects the interpretation and sets the right bit flags
depending on the m1.0 field of FB Info. This effectively fixes the
missing detection of MIDI 1.0 FB when m1.0 is 2.
Fixes: 37e0e14128 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241127070059.8099-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
kunit_kzalloc() may return a NULL pointer, dereferencing it without
NULL check may lead to NULL dereference.
Add NULL checks for all the kunit_kzalloc() in sound_kunit.c
Fixes: 3e39acf56e ("ALSA: core: Add sound core KUnit test")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Link: https://patch.msgid.link/20241126192448.12645-1-zichenxie0106@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Avoid leaking a tcon ref when a lease break races with opening the
cached directory. Processing the leak break might take a reference to
the tcon in cached_dir_lease_break() and then fail to release the ref in
cached_dir_offload_close, since cfid->tcon is still NULL.
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
On some powermacs `escc` nodes are missing `#size-cells` properties,
which is deprecated and now triggers a warning at boot since commit
045b14ca5c ("of: WARN on deprecated #address-cells/#size-cells
handling").
For example:
Missing '#size-cells' in /pci@f2000000/mac-io@c/escc@13000
WARNING: CPU: 0 PID: 0 at drivers/of/base.c:133 of_bus_n_size_cells+0x98/0x108
Hardware name: PowerMac3,1 7400 0xc0209 PowerMac
...
Call Trace:
of_bus_n_size_cells+0x98/0x108 (unreliable)
of_bus_default_count_cells+0x40/0x60
__of_get_address+0xc8/0x21c
__of_address_to_resource+0x5c/0x228
pmz_init_port+0x5c/0x2ec
pmz_probe.isra.0+0x144/0x1e4
pmz_console_init+0x10/0x48
console_init+0xcc/0x138
start_kernel+0x5c4/0x694
As powermacs boot via prom_init it's possible to add the missing
properties to the device tree during boot, avoiding the warning. Note
that `escc-legacy` nodes are also missing `#size-cells` properties, but
they are skipped by the macio driver, so leave them alone.
Depends-on: 045b14ca5c ("of: WARN on deprecated #address-cells/#size-cells handling")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241126025710.591683-1-mpe@ellerman.id.au
The variable name "prop" is inadvertently used twice in
ima_match_rules(), resulting in incorrect use of the local
variable when the function parameter should have been.
Rename the local variable and correct the use of the parameter.
Suggested-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Roberto Sassu <roberto.sassu@huawei.com>
[PM: subj tweak, Roberto's ACK]
Signed-off-by: Paul Moore <paul@paul-moore.com>
the kernel test robot reports a C23 extension
warning: label followed by a declaration is a C23 extension
[-Wc23-extensions]
696 | struct aa_profile *new_profile = NULL;
Instead of adding a null statement creating a C99 style inline var
declaration lift the label declaration out of the block so that it no
longer immediatedly follows the label.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411101808.AI8YG6cs-lkp@intel.com/
Fixes: ee650b3820f3 ("apparmor: properly handle cx/px lookup failure for complain")
Signed-off-by: John Johansen <john.johansen@canonical.com>
The wording of 'scrubbing environment' implied that all environment
variables would be removed, when instead secure-execution mode only
removes a small number of environment variables. This patch updates the
wording to describe what actually occurs instead: setting AT_SECURE for
ld.so's secure-execution mode.
Link: https://gitlab.com/apparmor/apparmor/-/merge_requests/1315 is a
merge request that does similar updating for apparmor userspace.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The macros for label combination XXX_comb are no longer used and there
are no plans to use them so remove the dead code.
Signed-off-by: John Johansen <john.johansen@canonical.com>
In the macro definition of next_comb(), a parameter L1 is accepted,
but it is not used. Hence, it should be removed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
After the deprecation of CONFIG_DEFAULT_SECURITY, it is no longer used
to enable and configure AppArmor. Since kernel 5.0,
`CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE` is not used either.
Instead, the CONFIG_LSM parameter manages the order and selection of LSMs.
Signed-off-by: Siddharth Menon <simeddon@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The previous audit_cap cache deduping was based on the profile that was
being audited. This could cause confusion due to the deduplication then
occurring across multiple processes, which could happen if multiple
instances of binaries matched the same profile attachment (and thus ran
under the same profile) or a profile was attached to a container and its
processes.
Instead, perform audit_cap deduping over ad->subj_cred, which ensures the
deduping only occurs across a single process, instead of across all
processes that match the current one's profile.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
When auditing capabilities, AppArmor uses a per-CPU, per-profile cache
such that the same capability for the same profile doesn't get repeatedly
audited, with the original goal of reducing audit logspam. However, this
cache does not have an expiration time, resulting in confusion when a
profile is shared across binaries (for example) and an expected DENIED
audit entry doesn't appear, despite the cache entry having been populated
much longer ago. This confusion was exacerbated by the per-CPU nature of
the cache resulting in the expected entries sporadically appearing when
the later denial+audit occurred on a different CPU.
To resolve this, record the last time a capability was audited for a
profile and add a timestamp expiration check before doing the audit.
v1 -> v2:
- Hardcode a longer timeout and drop the patches making it a sysctl,
after discussion with John Johansen.
- Cache the expiration time instead of the last-audited time. This value
can never be zero, which lets us drop the kernel_cap_t caps field from
the cache struct.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The profile_capabile function takes a struct apparmor_audit_data *ad,
which is documented as possibly being NULL. However, the single place that
calls this function never passes it a NULL ad. If we were ever to call
profile_capable with a NULL ad elsewhere, we would need to rework the
function, as its very first use of ad is to dereference ad->class without
checking if ad is NULL.
Thus, document profile_capable's ad parameter as not accepting NULL.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Multiple profiles shared 'ent->caps', so some logs missed.
Fixes: 0ed3b28ab8 ("AppArmor: mediation of non file objects")
Signed-off-by: chao liu <liuzgyid@outlook.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add a comment to unpack_perm to document the first entry in the packed
perms struct is reserved, and make a non-functional change of unpacking
to a temporary stack variable named "reserved" to help suppor the
documentation of which value is reserved.
Suggested-by: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
aa_label_audit, aa_label_find, aa_label_seq_print and aa_update_label_name
were added by commit
f1bd904175 ("apparmor: add the base fns() for domain labels")
but never used.
aa_profile_label_perm was added by commit
637f688dc3 ("apparmor: switch from profiles to using labels on contexts")
but never used.
aa_secid_update was added by commit
c092921219 ("apparmor: add support for mapping secids and using secctxes")
but never used.
aa_split_fqname has been unused since commit
3664268f19 ("apparmor: add namespace lookup fns()")
aa_lookup_profile has been unused since commit
93c98a484c ("apparmor: move exec domain mediation to using labels")
aa_audit_perms_cb was only used by aa_profile_label_perm (see above).
All of these commits are from around 2017.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Since kvfree() already checks if its argument is NULL, an additional
check before calling kvfree() is unnecessary and can be removed.
Remove it and the following Coccinelle/coccicheck warning reported by
ifnullfree.cocci:
WARNING: NULL check before some freeing functions is not needed
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Use the IS_ERR_OR_NULL() helper instead of open-coding a
NULL and an error pointer checks to simplify the code and
improve readability.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Currently the dfa state machine is limited by its default, next, and
check tables using u16. Allow loading of u32 tables, and if u16 tables
are loaded map them to u32.
The number of states allowed does not increase to 2^32 because the
base table uses the top 8 bits of its u32 for flags. Moving the flags
into a separate table allowing a full 2^32 bit range wil be done in
a separate patch.
Link: https://gitlab.com/apparmor/apparmor/-/issues/419
Signed-off-by: John Johansen <john.johansen@canonical.com>
mode profiles
When a cx/px lookup fails, apparmor would deny execution of the binary
even in complain mode (where it would audit as allowing execution while
actually denying it). Instead, in complain mode, create a new learning
profile, just as would have been done if the cx/px line wasn't there.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
attach->xmatch was not set when allocating a null profile, which is used in
complain mode to allocate a learning profile. This was causing downstream
failures in find_attach, which expected a valid xmatch but did not find
one under a certain sequence of profile transitions in complain mode.
This patch ensures the xmatch is set up properly for null profiles.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Correct GLINK driver's decoding of the CMD_OPEN message, as upper half
of the second parameter encodes "priority", and "length" is only the
lower half.
-----BEGIN PGP SIGNATURE-----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=Uz0V
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg update from Bjorn Andersson:
"Correct GLINK driver's decoding of the CMD_OPEN message, as upper half
of the second parameter encodes 'priority', and 'length' is only the
lower half"
* tag 'rpmsg-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length
Make Qualcomm TrustZone Peripherial Authentication Service-remoteproc
identifier/name human friendly. Add audio DSP support for the Qualcomm
SAR2130P. Ensure IMEM access in the Qualcomm modem remoteproc driver is
performed prior to the firmware enabling the XPU and locking us out.
Improve error handling, error logging, compile testing support, and a
few other stylistic things across a variety of the drivers.
-----BEGIN PGP SIGNATURE-----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=1JNI
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Make Qualcomm TrustZone Peripherial Authentication Service-remoteproc
identifier/name human friendly. Add audio DSP support for the Qualcomm
SAR2130P. Ensure IMEM access in the Qualcomm modem remoteproc driver
is performed prior to the firmware enabling the XPU and locking us
out.
Improve error handling, error logging, compile testing support, and a
few other stylistic things across a variety of the drivers"
* tag 'rproc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (30 commits)
remoteproc: qcom: wcss: Remove double assignment in q6v5_wcss_probe()
remoteproc: qcom_q6v5_mss: Re-order writes to the IMEM region
remoteproc: qcom_wcnss_iris: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_wcss: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_pas: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_mss: Drop redundant error printks in probe
remoteproc: qcom_q6v5_mss: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_adsp: Simplify with dev_err_probe()
remoteproc: qcom_q6v5_pas: disable auto boot for wpss
remoteproc: qcom: pas: Make remoteproc name human friendly
remoteproc: qcom: pas: enable SAR2130P audio DSP support
remoteproc: qcom: pas: add minidump_id to SM8350 resources
dt-bindings: remoteproc: qcom,sm8350-pas: add SAR2130P aDSP compatible
dt-bindings: remoteproc: qcom,sm8550-pas: Add SM8750 ADSP
remoteproc: qcom: wcss: Remove subdevs on the error path of q6v5_wcss_probe()
remoteproc: qcom: adsp: Remove subdevs on the error path of adsp_probe()
remoteproc: qcom: pas: Remove subdevs on the error path of adsp_probe()
remoteproc: Switch back to struct platform_driver::remove()
remoteproc: k3-dsp: Force cast from iomem address space
remoteproc: k3-r5: Force cast from iomem address space
...
Three fixes for v6.13-rc1
- aquacomputer_d5next: Fix length of speed_input array
- tps23861: Fix reporting of negative temperatures
- tmp108: Do not fail in I3C probe when I3C regmap is a module
-----BEGIN PGP SIGNATURE-----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=UGsr
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.13-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- aquacomputer_d5next: Fix length of speed_input array
- tps23861: Fix reporting of negative temperatures
- tmp108: Do not fail in I3C probe when I3C regmap is a module
* tag 'hwmon-for-v6.13-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (aquacomputer_d5next) Fix length of speed_input array
hwmon: (tps23861) Fix reporting of negative temperatures
hwmon: (tmp108) Do not fail in I3C probe when I3C regmap is a module
Core:
- avoid possible deadlock on probe
- ensured preferred address is used on hot-join
Drivers:
- dw: add AMD I3C controller support
- mipi-i3c-hci: fix SETDASA, DMA interrupts fixes
- svc: many fixes for IBI and hotjoin
-----BEGIN PGP SIGNATURE-----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=B7J8
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Core:
- avoid possible deadlock on probe
- ensured preferred address is used on hot-join
Drivers:
- dw: add AMD I3C controller support
- mipi-i3c-hci: fix SETDASA, DMA interrupts fixes
- svc: many fixes for IBI and hotjoin"
* tag 'i3c/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: Use i3cdev->desc->info instead of calling i3c_device_get_info() to avoid deadlock
i3c: mipi-i3c-hci: Support SETDASA CCC
i3c: dw: Add quirk to address OD/PP timing issue on AMD platform
i3c: dw: Add support for AMDI0015 ACPI ID
i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter
i3c: Document I3C_ADDR_SLOT_EXT_STATUS_MASK
i3c: master: svc: Fix pm_runtime_set_suspended() with runtime pm enabled
i3c: mipi-i3c-hci: Handle interrupts according to current specifications
i3c: mipi-i3c-hci: Mask ring interrupts before ring stop request
i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()
i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin
i3c: master: svc: fix possible assignment of the same address to two devices
i3c: master: svc: wait for Manual ACK/NACK Done before next step
i3c: master: svc: use spin_lock_irqsave at svc_i3c_master_ibi_work()
i3c: master: svc: need check IBIWON for dynamic address assignment
i3c: master: svc: manually emit NACK/ACK for hotjoin
i3c: master: svc: use repeat start when IBI WIN happens
i3c: master: Fix dynamic address leak when 'assigned-address' is present
i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_DESIRED
i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_STATUS_BITS
-----BEGIN PGP SIGNATURE-----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=2Otz
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
