Make queue_iostats_passthrough_show() report 0/1 in sysfs instead of 0/4.
This patch fixes the following sparse warning:
block/blk-sysfs.c:266:31: warning: incorrect type in argument 1 (different base types)
block/blk-sysfs.c:266:31: expected unsigned long var
block/blk-sysfs.c:266:31: got restricted blk_flags_t
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 110234da18 ("block: enable passthrough command statistics")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241212212941.1268662-4-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move a statement that occurs in both branches of an if-statement in front
of the if-statement. Fix a typo in a source code comment. No functionality
has been changed.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241212212941.1268662-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit fde02699c2 ("block: mq-deadline: Remove support for zone
write locking"), the local variable 'insert_before' is assigned once and
is used once. Hence remove this local variable.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241212212941.1268662-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After a recent change to clamp() and its variants [1] that increases the
coverage of the check that high is greater than low because it can be
done through inlining, certain build configurations (such as s390
defconfig) fail to build with clang with:
block/blk-iocost.c:1101:11: error: call to '__compiletime_assert_557' declared with 'error' attribute: clamp() low limit 1 greater than high limit active
1101 | inuse = clamp_t(u32, inuse, 1, active);
| ^
include/linux/minmax.h:218:36: note: expanded from macro 'clamp_t'
218 | #define clamp_t(type, val, lo, hi) __careful_clamp(type, val, lo, hi)
| ^
include/linux/minmax.h:195:2: note: expanded from macro '__careful_clamp'
195 | __clamp_once(type, val, lo, hi, __UNIQUE_ID(v_), __UNIQUE_ID(l_), __UNIQUE_ID(h_))
| ^
include/linux/minmax.h:188:2: note: expanded from macro '__clamp_once'
188 | BUILD_BUG_ON_MSG(statically_true(ulo > uhi), \
| ^
__propagate_weights() is called with an active value of zero in
ioc_check_iocgs(), which results in the high value being less than the
low value, which is undefined because the value returned depends on the
order of the comparisons.
The purpose of this expression is to ensure inuse is not more than
active and at least 1. This could be written more simply with a ternary
expression that uses min(inuse, active) as the condition so that the
value of that condition can be used if it is not zero and one if it is.
Do this conversion to resolve the error and add a comment to deter
people from turning this back into clamp().
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Link: https://lore.kernel.org/r/34d53778977747f19cce2abb287bb3e6@AcuMS.aculab.com/ [1]
Suggested-by: David Laight <david.laight@aculab.com>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/llvm/CA+G9fYsD7mw13wredcZn0L-KBA3yeoVSTuxnss-AEWMN3ha0cA@mail.gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412120322.3GfVe3vF-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make bio_iov_bvec_set() accept a pointer to const iov_iter, which means
that we can drop the undesirable casting to struct iov_iter pointer in
blk_rq_map_user_bvec().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241202115727.2320401-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg_unpin_online() walks up the blkcg hierarchy putting the online pin. To
walk up, it uses blkcg_parent(blkcg) but it was calling that after
blkcg_destroy_blkgs(blkcg) which could free the blkcg, leading to the
following UAF:
==================================================================
BUG: KASAN: slab-use-after-free in blkcg_unpin_online+0x15a/0x270
Read of size 8 at addr ffff8881057678c0 by task kworker/9:1/117
CPU: 9 UID: 0 PID: 117 Comm: kworker/9:1 Not tainted 6.13.0-rc1-work-00182-gb8f52214c61a-dirty #48
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
Workqueue: cgwb_release cgwb_release_workfn
Call Trace:
<TASK>
dump_stack_lvl+0x27/0x80
print_report+0x151/0x710
kasan_report+0xc0/0x100
blkcg_unpin_online+0x15a/0x270
cgwb_release_workfn+0x194/0x480
process_scheduled_works+0x71b/0xe20
worker_thread+0x82a/0xbd0
kthread+0x242/0x2c0
ret_from_fork+0x33/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
...
Freed by task 1944:
kasan_save_track+0x2b/0x70
kasan_save_free_info+0x3c/0x50
__kasan_slab_free+0x33/0x50
kfree+0x10c/0x330
css_free_rwork_fn+0xe6/0xb30
process_scheduled_works+0x71b/0xe20
worker_thread+0x82a/0xbd0
kthread+0x242/0x2c0
ret_from_fork+0x33/0x70
ret_from_fork_asm+0x1a/0x30
Note that the UAF is not easy to trigger as the free path is indirected
behind a couple RCU grace periods and a work item execution. I could only
trigger it with artifical msleep() injected in blkcg_unpin_online().
Fix it by reading the parent pointer before destroying the blkcg's blkg's.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Abagail ren <renzezhongucas@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Fixes: 4308a434e5 ("blkcg: don't offline parent blkcg first")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zone write plugging for handling writes to zones of a zoned block
device always execute a zone report whenever a write BIO to a zone
fails. The intent of this is to ensure that the tracking of a zone write
pointer is always correct to ensure that the alignment to a zone write
pointer of write BIOs can be checked on submission and that we can
always correctly emulate zone append operations using regular write
BIOs.
However, this error recovery scheme introduces a potential deadlock if a
device queue freeze is initiated while BIOs are still plugged in a zone
write plug and one of these write operation fails. In such case, the
disk zone write plug error recovery work is scheduled and executes a
report zone. This in turn can result in a request allocation in the
underlying driver to issue the report zones command to the device. But
with the device queue freeze already started, this allocation will
block, preventing the report zone execution and the continuation of the
processing of the plugged BIOs. As plugged BIOs hold a queue usage
reference, the queue freeze itself will never complete, resulting in a
deadlock.
Avoid this problem by completely removing from the zone write plugging
code the use of report zones operations after a failed write operation,
instead relying on the device user to either execute a report zones,
reset the zone, finish the zone, or give up writing to the device (which
is a fairly common pattern for file systems which degrade to read-only
after write failures). This is not an unreasonnable requirement as all
well-behaved applications, FSes and device mapper already use report
zones to recover from write errors whenever possible by comparing the
current position of a zone write pointer with what their assumption
about the position is.
The changes to remove the automatic error recovery are as follows:
- Completely remove the error recovery work and its associated
resources (zone write plug list head, disk error list, and disk
zone_wplugs_work work struct). This also removes the functions
disk_zone_wplug_set_error() and disk_zone_wplug_clear_error().
- Change the BLK_ZONE_WPLUG_ERROR zone write plug flag into
BLK_ZONE_WPLUG_NEED_WP_UPDATE. This new flag is set for a zone write
plug whenever a write opration targetting the zone of the zone write
plug fails. This flag indicates that the zone write pointer offset is
not reliable and that it must be updated when the next report zone,
reset zone, finish zone or disk revalidation is executed.
- Modify blk_zone_write_plug_bio_endio() to set the
BLK_ZONE_WPLUG_NEED_WP_UPDATE flag for the target zone of a failed
write BIO.
- Modify the function disk_zone_wplug_set_wp_offset() to clear this
new flag, thus implementing recovery of a correct write pointer
offset with the reset (all) zone and finish zone operations.
- Modify blkdev_report_zones() to always use the disk_report_zones_cb()
callback so that disk_zone_wplug_sync_wp_offset() can be called for
any zone marked with the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag.
This implements recovery of a correct write pointer offset for zone
write plugs marked with BLK_ZONE_WPLUG_NEED_WP_UPDATE and within
the range of the report zones operation executed by the user.
- Modify blk_revalidate_seq_zone() to call
disk_zone_wplug_sync_wp_offset() for all sequential write required
zones when a zoned block device is revalidated, thus always resolving
any inconsistency between the write pointer offset of zone write
plugs and the actual write pointer position of sequential zones.
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241209122357.47838-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The zone reclaim processing of the dm-zoned device mapper uses
blkdev_issue_zeroout() to align the write pointer of a zone being used
for reclaiming another zone, to write the valid data blocks from the
zone being reclaimed at the same position relative to the zone start in
the reclaim target zone.
The first call to blkdev_issue_zeroout() will try to use hardware
offload using a REQ_OP_WRITE_ZEROES operation if the device reports a
non-zero max_write_zeroes_sectors queue limit. If this operation fails
because of the lack of hardware support, blkdev_issue_zeroout() falls
back to using a regular write operation with the zero-page as buffer.
Currently, such REQ_OP_WRITE_ZEROES failure is automatically handled by
the block layer zone write plugging code which will execute a report
zones operation to ensure that the write pointer of the target zone of
the failed operation has not changed and to "rewind" the zone write
pointer offset of the target zone as it was advanced when the write zero
operation was submitted. So the REQ_OP_WRITE_ZEROES failure does not
cause any issue and blkdev_issue_zeroout() works as expected.
However, since the automatic recovery of zone write pointers by the zone
write plugging code can potentially cause deadlocks with queue freeze
operations, a different recovery must be implemented in preparation for
the removal of zone write plugging report zones based recovery.
Do this by introducing the new function blk_zone_issue_zeroout(). This
function first calls blkdev_issue_zeroout() with the flag
BLKDEV_ZERO_NOFALLBACK to intercept failures on the first execution
which attempt to use the device hardware offload with the
REQ_OP_WRITE_ZEROES operation. If this attempt fails, a report zone
operation is issued to restore the zone write pointer offset of the
target zone to the correct position and blkdev_issue_zeroout() is called
again without the BLKDEV_ZERO_NOFALLBACK flag. The report zones
operation performing this recovery is implemented using the helper
function disk_zone_sync_wp_offset() which calls the gendisk report_zones
file operation with the callback disk_report_zones_cb(). This callback
updates the target write pointer offset of the target zone using the new
function disk_zone_wplug_sync_wp_offset().
dmz_reclaim_align_wp() is modified to change its call to
blkdev_issue_zeroout() to a call to blk_zone_issue_zeroout() without any
other change needed as the two functions are functionnally equivalent.
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241209122357.47838-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are currently any issuer of REQ_OP_ZONE_RESET and
REQ_OP_ZONE_FINISH operations that set REQ_NOWAIT. However, as we cannot
handle this flag correctly due to the potential request allocation
failure that may happen in blk_mq_submit_bio() after blk_zone_plug_bio()
has handled the zone write plug write pointer updates for the targeted
zones, modify blk_zone_wplug_handle_reset_or_finish() to warn if this
flag is set and ignore it.
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241209122357.47838-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For zoned block devices, a write BIO issued to a zone that has no
on-going writes will be prepared for execution and allowed to execute
immediately by blk_zone_wplug_handle_write() (called from
blk_zone_plug_bio()). However, if this BIO specifies REQ_NOWAIT, the
allocation of a request for its execution in blk_mq_submit_bio() may
fail after blk_zone_plug_bio() completed, marking the target zone of the
BIO as plugged. When this BIO is retried later on, it will be blocked as
the zone write plug of the target zone is in a plugged state without any
on-going write operation (completion of write operations trigger
unplugging of the next write BIOs for a zone). This leads to a BIO that
is stuck in a zone write plug and never completes, which results in
various issues such as hung tasks.
Avoid this problem by always executing REQ_NOWAIT write BIOs using the
BIO work of a zone write plug. This ensure that we never block the BIO
issuer and can thus safely ignore the REQ_NOWAIT flag when executing the
BIO from the zone write plug BIO work.
Since such BIO may be the first write BIO issued to a zone with no
on-going write, modify disk_zone_wplug_add_bio() to schedule the zone
write plug BIO work if the write plug is not already marked with the
BLK_ZONE_WPLUG_PLUGGED flag. This scheduling is otherwise not necessary
as the completion of the on-going write for the zone will schedule the
execution of the next plugged BIOs.
blk_zone_wplug_handle_write() is also fixed to better handle zone write
plug allocation failures for REQ_NOWAIT BIOs by failing a write BIO
using bio_wouldblock_error() instead of bio_io_error().
Reported-by: Bart Van Assche <bvanassche@acm.org>
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241209122357.47838-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Registering and unregistering cpuhp callback requires global cpu hotplug lock,
which is used everywhere. Meantime q->sysfs_lock is used in block layer
almost everywhere.
It is easy to trigger lockdep warning[1] by connecting the two locks.
Fix the warning by moving blk-mq's cpuhp callback registering out of
q->sysfs_lock. Add one dedicated global lock for covering registering &
unregistering hctx's cpuhp, and it is safe to do so because hctx is
guaranteed to be live if our request_queue is live.
[1] https://lore.kernel.org/lkml/Z04pz3AlvI4o0Mr8@agluck-desk3/
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Newman <peternewman@google.com>
Cc: Babu Moger <babu.moger@amd.com>
Reported-by: Luck Tony <tony.luck@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20241206111611.978870-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to retrieve 'hctx' from xarray table in the cpuhp callback, so the
callback should be registered after this 'hctx' is added to xarray table.
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Newman <peternewman@google.com>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Luck Tony <tony.luck@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20241206111611.978870-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=6cbB
-----END PGP SIGNATURE-----
Merge tag 'block-6.13-20242901' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- NVMe pull request via Keith:
- Use correct srcu list traversal (Breno)
- Scatter-gather support for metadata (Keith)
- Fabrics shutdown race condition fix (Nilay)
- Persistent reservations updates (Guixin)
- Add the required bits for MD atomic write support for raid0/1/10
- Correct return value for unknown opcode in ublk
- Fix deadlock with zone revalidation
- Fix for the io priority request vs bio cleanups
- Use the correct unsigned int type for various limit helpers
- Fix for a race in loop
- Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make
it easier for actual humans to read
- Fix potential UAF when iterating tags
- A few fixes for bfq-iosched UAF issues
- Fix for brd discard not decrementing the allocated page count
- Various little fixes and cleanups
* tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits)
brd: decrease the number of allocated pages which discarded
block, bfq: fix bfqq uaf in bfq_limit_depth()
block: Don't allow an atomic write be truncated in blkdev_write_iter()
mq-deadline: don't call req_get_ioprio from the I/O completion handler
block: Prevent potential deadlock in blk_revalidate_disk_zones()
block: Remove extra part pointer NULLify in blk_rq_init()
nvme: tuning pr code by using defined structs and macros
nvme: introduce change ptpl and iekey definition
block: return bool from get_disk_ro and bdev_read_only
block: remove a duplicate definition for bdev_read_only
block: return bool from blk_rq_aligned
block: return unsigned int from blk_lim_dma_alignment_and_pad
block: return unsigned int from queue_dma_alignment
block: return unsigned int from bdev_io_opt
block: req->bio is always set in the merge code
block: don't bother checking the data direction for merges
block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor
Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()"
md/raid10: Atomic write support
md/raid1: Atomic write support
...
Set new allocated bfqq to bic or remove freed bfqq from bic are both
protected by bfqd->lock, however bfq_limit_depth() is deferencing bfqq
from bic without the lock, this can lead to UAF if the io_context is
shared by multiple tasks.
For example, test bfq with io_uring can trigger following UAF in v6.6:
==================================================================
BUG: KASAN: slab-use-after-free in bfqq_group+0x15/0x50
Call Trace:
<TASK>
dump_stack_lvl+0x47/0x80
print_address_description.constprop.0+0x66/0x300
print_report+0x3e/0x70
kasan_report+0xb4/0xf0
bfqq_group+0x15/0x50
bfqq_request_over_limit+0x130/0x9a0
bfq_limit_depth+0x1b5/0x480
__blk_mq_alloc_requests+0x2b5/0xa00
blk_mq_get_new_requests+0x11d/0x1d0
blk_mq_submit_bio+0x286/0xb00
submit_bio_noacct_nocheck+0x331/0x400
__block_write_full_folio+0x3d0/0x640
writepage_cb+0x3b/0xc0
write_cache_pages+0x254/0x6c0
write_cache_pages+0x254/0x6c0
do_writepages+0x192/0x310
filemap_fdatawrite_wbc+0x95/0xc0
__filemap_fdatawrite_range+0x99/0xd0
filemap_write_and_wait_range.part.0+0x4d/0xa0
blkdev_read_iter+0xef/0x1e0
io_read+0x1b6/0x8a0
io_issue_sqe+0x87/0x300
io_wq_submit_work+0xeb/0x390
io_worker_handle_work+0x24d/0x550
io_wq_worker+0x27f/0x6c0
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 808602:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_slab_alloc+0x83/0x90
kmem_cache_alloc_node+0x1b1/0x6d0
bfq_get_queue+0x138/0xfa0
bfq_get_bfqq_handle_split+0xe3/0x2c0
bfq_init_rq+0x196/0xbb0
bfq_insert_request.isra.0+0xb5/0x480
bfq_insert_requests+0x156/0x180
blk_mq_insert_request+0x15d/0x440
blk_mq_submit_bio+0x8a4/0xb00
submit_bio_noacct_nocheck+0x331/0x400
__blkdev_direct_IO_async+0x2dd/0x330
blkdev_write_iter+0x39a/0x450
io_write+0x22a/0x840
io_issue_sqe+0x87/0x300
io_wq_submit_work+0xeb/0x390
io_worker_handle_work+0x24d/0x550
io_wq_worker+0x27f/0x6c0
ret_from_fork+0x2d/0x50
ret_from_fork_asm+0x1b/0x30
Freed by task 808589:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x27/0x40
__kasan_slab_free+0x126/0x1b0
kmem_cache_free+0x10c/0x750
bfq_put_queue+0x2dd/0x770
__bfq_insert_request.isra.0+0x155/0x7a0
bfq_insert_request.isra.0+0x122/0x480
bfq_insert_requests+0x156/0x180
blk_mq_dispatch_plug_list+0x528/0x7e0
blk_mq_flush_plug_list.part.0+0xe5/0x590
__blk_flush_plug+0x3b/0x90
blk_finish_plug+0x40/0x60
do_writepages+0x19d/0x310
filemap_fdatawrite_wbc+0x95/0xc0
__filemap_fdatawrite_range+0x99/0xd0
filemap_write_and_wait_range.part.0+0x4d/0xa0
blkdev_read_iter+0xef/0x1e0
io_read+0x1b6/0x8a0
io_issue_sqe+0x87/0x300
io_wq_submit_work+0xeb/0x390
io_worker_handle_work+0x24d/0x550
io_wq_worker+0x27f/0x6c0
ret_from_fork+0x2d/0x50
ret_from_fork_asm+0x1b/0x30
Fix the problem by protecting bic_to_bfqq() with bfqd->lock.
CC: Jan Kara <jack@suse.cz>
Fixes: 76f1df88bb ("bfq: Limit number of requests consumed by each cgroup")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20241129091509.2227136-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A write which goes past the end of the bdev in blkdev_write_iter() will
be truncated. Truncating cannot tolerated for an atomic write, so error
that condition.
Fixes: caf336f81b ("block: Add fops atomic write support")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241127092318.632790-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req_get_ioprio looks at req->bio to find the I/O priority, which is not
set when completing bios that the driver fully iterated through.
Stash away the dd_per_prio in the elevator private data instead of looking
it up again to optimize the code a bit while fixing the regression from
removing the per-request ioprio value.
Fixes: 6975c1a486 ("block: remove the ioprio field from struct request")
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Reported-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241126102136.619067-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function blk_revalidate_disk_zones() calls the function
disk_update_zone_resources() after freezing the device queue. In turn,
disk_update_zone_resources() calls queue_limits_start_update() which
takes a queue limits mutex lock, resulting in the ordering:
q->q_usage_counter check -> q->limits_lock. However, the usual ordering
is to always take a queue limit lock before freezing the queue to commit
the limits updates, e.g., the code pattern:
lim = queue_limits_start_update(q);
...
blk_mq_freeze_queue(q);
ret = queue_limits_commit_update(q, &lim);
blk_mq_unfreeze_queue(q);
Thus, blk_revalidate_disk_zones() introduces a potential circular
locking dependency deadlock that lockdep sometimes catches with the
splat:
[ 51.934109] ======================================================
[ 51.935916] WARNING: possible circular locking dependency detected
[ 51.937561] 6.12.0+ #2107 Not tainted
[ 51.938648] ------------------------------------------------------
[ 51.940351] kworker/u16:4/157 is trying to acquire lock:
[ 51.941805] ffff9fff0aa0bea8 (&q->limits_lock){+.+.}-{4:4}, at: disk_update_zone_resources+0x86/0x170
[ 51.944314]
but task is already holding lock:
[ 51.945688] ffff9fff0aa0b890 (&q->q_usage_counter(queue)#3){++++}-{0:0}, at: blk_revalidate_disk_zones+0x15f/0x340
[ 51.948527]
which lock already depends on the new lock.
[ 51.951296]
the existing dependency chain (in reverse order) is:
[ 51.953708]
-> #1 (&q->q_usage_counter(queue)#3){++++}-{0:0}:
[ 51.956131] blk_queue_enter+0x1c9/0x1e0
[ 51.957290] blk_mq_alloc_request+0x187/0x2a0
[ 51.958365] scsi_execute_cmd+0x78/0x490 [scsi_mod]
[ 51.959514] read_capacity_16+0x111/0x410 [sd_mod]
[ 51.960693] sd_revalidate_disk.isra.0+0x872/0x3240 [sd_mod]
[ 51.962004] sd_probe+0x2d7/0x520 [sd_mod]
[ 51.962993] really_probe+0xd5/0x330
[ 51.963898] __driver_probe_device+0x78/0x110
[ 51.964925] driver_probe_device+0x1f/0xa0
[ 51.965916] __driver_attach_async_helper+0x60/0xe0
[ 51.967017] async_run_entry_fn+0x2e/0x140
[ 51.968004] process_one_work+0x21f/0x5a0
[ 51.968987] worker_thread+0x1dc/0x3c0
[ 51.969868] kthread+0xe0/0x110
[ 51.970377] ret_from_fork+0x31/0x50
[ 51.970983] ret_from_fork_asm+0x11/0x20
[ 51.971587]
-> #0 (&q->limits_lock){+.+.}-{4:4}:
[ 51.972479] __lock_acquire+0x1337/0x2130
[ 51.973133] lock_acquire+0xc5/0x2d0
[ 51.973691] __mutex_lock+0xda/0xcf0
[ 51.974300] disk_update_zone_resources+0x86/0x170
[ 51.975032] blk_revalidate_disk_zones+0x16c/0x340
[ 51.975740] sd_zbc_revalidate_zones+0x73/0x160 [sd_mod]
[ 51.976524] sd_revalidate_disk.isra.0+0x465/0x3240 [sd_mod]
[ 51.977824] sd_probe+0x2d7/0x520 [sd_mod]
[ 51.978917] really_probe+0xd5/0x330
[ 51.979915] __driver_probe_device+0x78/0x110
[ 51.981047] driver_probe_device+0x1f/0xa0
[ 51.982143] __driver_attach_async_helper+0x60/0xe0
[ 51.983282] async_run_entry_fn+0x2e/0x140
[ 51.984319] process_one_work+0x21f/0x5a0
[ 51.985873] worker_thread+0x1dc/0x3c0
[ 51.987289] kthread+0xe0/0x110
[ 51.988546] ret_from_fork+0x31/0x50
[ 51.989926] ret_from_fork_asm+0x11/0x20
[ 51.991376]
other info that might help us debug this:
[ 51.994127] Possible unsafe locking scenario:
[ 51.995651] CPU0 CPU1
[ 51.996694] ---- ----
[ 51.997716] lock(&q->q_usage_counter(queue)#3);
[ 51.998817] lock(&q->limits_lock);
[ 52.000043] lock(&q->q_usage_counter(queue)#3);
[ 52.001638] lock(&q->limits_lock);
[ 52.002485]
*** DEADLOCK ***
Prevent this issue by moving the calls to blk_mq_freeze_queue() and
blk_mq_unfreeze_queue() around the call to queue_limits_commit_update()
in disk_update_zone_resources(). In case of revalidation failure, the
call to disk_free_zone_resources() in blk_revalidate_disk_zones()
is still done with the queue frozen as before.
Fixes: 843283e96e ("block: Fake max open zones limit when there is no limit")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241126104705.183996-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As smatch, which is a lot smarter than me noticed. So remove the checks
for it, and condense these checks a bit including the comments stating
the obvious.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241119161157.1328171-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Because it already is encoded in the opcode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241119161157.1328171-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix an issue detected by the `smatch` tool:
block/blk-mq.c:3314 blk_rq_prep_clone() error: uninitialized
symbol 'bio'.
This patch refactors `blk_rq_prep_clone()` to improve code
readability and ensure safety by addressing potential misuse of
the `bio` variable:
- Move the bio_put(bio); call to the bio_ctr error handling block,
which is the only place where it can be triggered.
- Move the bio variable into the __rq_for_each_bio loop scope.
This change removes the need to set bio to NULL at the loop's
end.
discussion on why bio remains uninitialized:
https://lore.kernel.org/lkml/20241004141037.43277-1-surajsonawane0215@gmail.com
Summary of above discussion:
- I pointed out that `bio` can remain uninitialized if the
allocation with `bio_alloc_clone` fails.
- Keith Busch explained that `bio` is initialized to `NULL` when
`bio_alloc_clone()` fails, preventing uninitialized usage.
- John Garry questioned whether `rq_src->bio` being `NULL` could
leave `bio` uninitialized. Keith clarified that in such cases,
`bio` is not referenced, so it does not need initialization.
- Christoph Hellwig recommended code improvements:
- move the bio_put to the bio_ctr error handling, which is the only
case where it can happen
- move the bio variable into the __rq_for_each_bio scope, which
also removed the need to zero it at the end of the loop
These changes enhance code clarity, address static analysis tool
warnings, and make the function more maintainable.
thread of previous version patch discussion:
https://lore.kernel.org/lkml/20241004100842.9052-1-surajsonawane0215@gmail.com
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241119164412.37609-1-surajsonawane0215@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow stacked devices to support atomic writes by aggregating the minimum
capability of all bottom devices.
Flag BLK_FEAT_ATOMIC_WRITES_STACKED is set for stacked devices which
have been enabled to support atomic writes.
Some things to note on the implementation:
- For simplicity, all bottom devices must have same atomic write boundary
value (if any)
- The atomic write boundary must be a power-of-2 already, but this
restriction could be relaxed. Furthermore, it is now required that the
chunk sectors for a top device must be aligned with this boundary.
- If a bottom device atomic write unit min/max are not aligned with the
top device chunk sectors, the top device atomic write unit min/max are
reduced to a value which works for the chunk sectors.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241118105018.1870052-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is so far expected that the limits passed are valid.
In future atomic writes will be supported for stacked block devices, and
calculating the limits there will be complicated, so add extra sanity
checks to ensure that the values are always valid.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241118105018.1870052-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
lim->discard_granularity is always at least SECTOR_SIZE, so drop the
pointless check for granularity less than SECTOR_SIZE.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241112092144.4059847-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=PWTH
-----END PGP SIGNATURE-----
Merge tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Use uring_cmd helper (Pavel)
- Host Memory Buffer allocation enhancements (Christoph)
- Target persistent reservation support (Guixin)
- Persistent reservation tracing (Guixen)
- NVMe 2.1 specification support (Keith)
- Rotational Meta Support (Matias, Wang, Keith)
- Volatile cache detection enhancment (Guixen)
- MD updates via Song:
- Maintainers update
- raid5 sync IO fix
- Enhance handling of faulty and blocked devices
- raid5-ppl atomic improvement
- md-bitmap fix
- Support for manually defining embedded partition tables
- Zone append fixes and cleanups
- Stop sending the queued requests in the plug list to the driver
->queue_rqs() handle in reverse order.
- Zoned write plug cleanups
- Cleanups disk stats tracking and add support for disk stats for
passthrough IO
- Add preparatory support for file system atomic writes
- Add lockdep support for queue freezing. Already found a bunch of
issues, and some fixes for that are in here. More will be coming.
- Fix race between queue stopping/quiescing and IO queueing
- ublk recovery improvements
- Fix ublk mmap for 64k pages
- Various fixes and cleanups
* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
MAINTAINERS: Update git tree for mdraid subsystem
block: make struct rq_list available for !CONFIG_BLOCK
block/genhd: use seq_put_decimal_ull for diskstats decimal values
block: don't reorder requests in blk_mq_add_to_batch
block: don't reorder requests in blk_add_rq_to_plug
block: add a rq_list type
block: remove rq_list_move
virtio_blk: reverse request order in virtio_queue_rqs
nvme-pci: reverse request order in nvme_queue_rqs
btrfs: validate queue limits
block: export blk_validate_limits
nvmet: add tracing of reservation commands
nvme: parse reservation commands's action and rtype to string
nvmet: report ns's vwc not present
md/raid5: Increase r5conf.cache_name size
block: remove the ioprio field from struct request
block: remove the write_hint field from struct request
nvme: check ns's volatile write cache not present
nvme: add rotational support
nvme: use command set independent id ns if available
...
There was a bug report [1] where the user got a warning alignment
inconsistency. The user has optimal I/O 16776704 (0xFFFE00) and physical
block size 4096. Note that the optimal I/O size may be set by the DMA
engines or SCSI controllers and they have no knowledge about the disks
attached to them, so the situation with optimal I/O not aligned to
physical block size may happen.
This commit makes blk_validate_limits round down optimal I/O size to the
physical block size of the block device.
Closes: https://lore.kernel.org/dm-devel/1426ad71-79b4-4062-b2bf-84278be66a5d@redhat.com/T/ [1]
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: a23634644a ("block: take io_opt and io_min into account for max_sectors")
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/3dc0014b-9690-dc38-81c9-4a316a2d4fb2@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcopwAKCRCRxhvAZXjc
oitWAQD68PGFI6/ES9x+qGsDFEZBH08icuO+a9dyaZXyNRosDgD/ex2zHj6F7IzS
Ghgb9jiqWQ8l2+PDYfisxa/0jiqCbAk=
=DmXf
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.untorn.writes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs untorn write support from Christian Brauner:
"An atomic write is a write issed with torn-write protection. This
means for a power failure or any hardware failure all or none of the
data from the write will be stored, never a mix of old and new data.
This work is already supported for block devices. If a block device is
opened with O_DIRECT and the block device supports atomic write, then
FMODE_CAN_ATOMIC_WRITE is added to the file of the opened block
device.
This contains the work to expand atomic write support to filesystems,
specifically ext4 and XFS. Currently, only support for writing exactly
one filesystem block atomically is added.
Since it's now possible to have filesystem block size > page size for
XFS, it's possible to write 4K+ blocks atomically on x86"
* tag 'vfs-6.13.untorn.writes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: drop an obsolete comment in iomap_dio_bio_iter
ext4: Do not fallback to buffered-io for DIO atomic write
ext4: Support setting FMODE_CAN_ATOMIC_WRITE
ext4: Check for atomic writes support in write iter
ext4: Add statx support for atomic writes
xfs: Support setting FMODE_CAN_ATOMIC_WRITE
xfs: Validate atomic writes
xfs: Support atomic write for statx
fs: iomap: Atomic write support
fs: Export generic_atomic_write_valid()
block: Add bdev atomic write limits helpers
fs/block: Check for IOCB_DIRECT in generic_atomic_write_valid()
block/fs: Pass an iocb to generic_atomic_write_valid()
seq_printf is costly. For each block device, 19 decimal values are
yielded in /proc/diskstats via seq_printf. On a system with 16 logical
block devices, profiling for open/read/close sequences shows seq_printf
took ~75% samples of diskstats_show:
diskstats_show(92.626% 2269372/2450040)
seq_printf(76.026% 1725313/2269372)
vsnprintf(99.163% 1710866/1725313)
format_decode(26.597% 455040/1710866)
number(19.554% 334542/1710866)
memcpy_orig(4.183% 71570/1710866)
...
srso_return_thunk(0.009% 148/1725313)
part_stat_read_all(8.030% 182236/2269372)
One million rounds of open/read/close /proc/diskstats takes:
real 0m37.687s
user 0m0.264s
sys 0m32.911s
On average, each sequence tooks ~0.032ms
With this patch, most decimal values are yield via seq_put_decimal_ull,
performance is significantly improved:
real 0m20.792s
user 0m0.316s
sys 0m20.463s
On average, each sequence tooks ~0.020ms, a ~37.5% improvement.
Signed-off-by: David Wang <00107082@163.com>
Link: https://lore.kernel.org/r/20241108054500.4251-1-00107082@163.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add requests to the tail of the list instead of the front so that they
are queued up in submission order.
Remove the re-reordering in blk_mq_dispatch_plug_list, virtio_queue_rqs
and nvme_queue_rqs now that the list is ordered as expected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the semi-open coded request list helpers with a proper rq_list
type that mirrors the bio_list and has head and tail pointers. Besides
better type safety this actually allows to insert at the tail of the
list, which will be useful soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While block drivers do the validation as part of committing them to the
queue, users that use the limit outside of a block device context have
to validate the limits and fill in the calculated values as well.
So far btrfs is the only user of queue limits without a block device,
and it has gotten away with that more or less by accident. But with
commit 559218d43e ("block: pre-calculate max_zone_append_sectors")
this became fatal for setups that have small max zone append size,
as it won't be limited now.
Export blk_validate_limits so that it can be called directly from btrfs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241113084541.34315-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The request ioprio is only initialized from the first attached bio,
so requests without a bio already never set it. Directly use the
bio field instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241112170050.1612998-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The write_hint is only used for read/write requests, which must have a
bio attached to them. Just use the bio field instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241112170050.1612998-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
max_zone_append_sectors differs from all other queue limits in that the
final value used is not stored in the queue_limits but needs to be
obtained using queue_limits_max_zone_append_sectors helper. This not
only adds (tiny) extra overhead to the I/O path, but also can be easily
forgotten in file system code.
Add a new max_hw_zone_append_sectors value to queue_limits which is
set by the driver, and calculate max_zone_append_sectors from that and
the other inputs in blk_validate_zoned_limits, similar to how
max_sectors is calculated to fix this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241104073955.112324-3-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241108154657.845768-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make bio_is_zone_append globally available, because file systems need
to use to check for a zone append bio in their end_io handlers to deal
with the block layer emulation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241104062647.91160-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Otherwise it can create unaligned writes on zoned devices.
Fixes: a805a4fa4f ("block: introduce zone_write_granularity limit")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241104062647.91160-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For zoned devices, write zeroes must be split at the zone boundary
which is represented as chunk_sectors. For other uses like the
internally RAIDed NVMe devices it is probably at least useful.
Enhance get_max_io_size to know about write zeroes and use it in
bio_split_write_zeroes. Also add a comment about the seemingly
nonsensical zero max_write_zeroes limit.
Fixes: 885fa13f65 ("block: implement splitting of REQ_OP_WRITE_ZEROES bios")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241104062647.91160-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_split() may error, so check this.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241111112150.3756529-4-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is disallowed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241111112150.3756529-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of returning an inconclusive value of NULL for an error in calling
bio_split(), return a ERR_PTR() always.
Also remove the BUG_ON() calls, and WARN_ON_ONCE() instead. Indeed, since
almost all callers don't check the return code from bio_split(), we'll
crash anyway (for those failures).
Fix up the only user which checks bio_split() return code today (directly
or indirectly), blk_crypto_fallback_split_bio_if_needed(). The md/bcache
code does check the return code in cached_dev_cache_miss() ->
bio_next_split() -> bio_split(), but only to see if there was a split, so
there would be no change in behaviour here (when returning a ERR_PTR()).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241111112150.3756529-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
elevator_init_mq() is only called at the entry of add_disk_fwnode() when
disk IO isn't allowed yet.
So not verify io lock(q->io_lockdep_map) for freeze & unfreeze in
elevator_init_mq().
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Lai Yi <yi1.lai@linux.intel.com>
Fixes: f1be1788a3 ("block: model freeze & enter queue as lock for supporting lockdep")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241031133723.303835-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit f1be1788a3 ("block: model freeze & enter queue as lock for
supporting lockdep") tries to apply lockdep for verifying freeze &
unfreeze. However, the verification is only done the outmost freeze and
unfreeze. This way is actually not correct because q->mq_freeze_depth
still may drop to zero on other task instead of the freeze owner task.
Fix this issue by always verifying the last unfreeze lock on the owner
task context, and make sure both the outmost freeze & unfreeze are
verified in the current task.
Fixes: f1be1788a3 ("block: model freeze & enter queue as lock for supporting lockdep")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241031133723.303835-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No one use blk_freeze_queue(), so remove it and the obsolete comment.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241031133723.303835-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Turn the private disk_zone_is_conv() function in blk-zoned.c into a
public and documented bdev_zone_is_seq() helper with the inverse
polarity of the original function, also adding a check for non-zoned
devices so that all file systems can use the helper, even with a regular
block device.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241107064300.227731-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure that a disk revalidation changing the conventional zones bitmap
of a disk does not cause invalid memory references when using the
disk_zone_is_conv() helper by RCU protecting the disk->conv_zones_bitmap
pointer.
disk_zone_is_conv() is modified to operate under the RCU read lock and
the function disk_set_conv_zones_bitmap() is added to update a disk
conv_zones_bitmap pointer using rcu_replace_pointer() with the disk
zone_wplugs_lock spinlock held.
disk_free_zone_resources() is modified to call
disk_update_zone_resources() with a NULL bitmap pointer to free the disk
conv_zones_bitmap. disk_set_conv_zones_bitmap() is also used in
disk_update_zone_resources() to set the new (revalidated) bitmap and
free the old one.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241107064300.227731-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Per Documentation/filesystems/sysfs.rst, show() should only use
sysfs_emit() or sysfs_emit_at() when formatting the value to be
returned to user space.
No functional change intended.
Signed-off-by: zhangguopeng <zhangguopeng@kylinos.cn>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241107104258.29742-1-zhangguopeng@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
