linux/arch/mips/ralink
John Thomson 7c18b64bba mips: ralink: mt7621: do not use kzalloc too early
With CONFIG_SLUB=y, following commit 6edf2576a6 ("mm/slub: enable
debugging memory wasting of kmalloc") mt7621 failed to boot very early,
without showing any console messages.
This exposed the pre-existing bug of mt7621.c using kzalloc before normal
memory management was available.
Prior to this slub change, there existed the unintended protection against
"kmem_cache *s" being NULL as slab_pre_alloc_hook() happened to
return NULL and bailed out of slab_alloc_node().
This allowed mt7621 prom_soc_init to fail in the soc_dev_init kzalloc,
but continue booting without the SOC_BUS driver device registered.

Console output from a DEBUG_ZBOOT vmlinuz kernel loading,
with mm/slub modified to warn on kmem_cache zero or null:

zimage at:     80B842A0 810B4BC0
Uncompressing Linux at load address 80001000
Copy device tree to address  80B80EE0
Now, booting the kernel...

[    0.000000] Linux version 6.1.0-rc3+ (john@john)
(mipsel-buildroot-linux-gnu-gcc.br_real (Buildroot
2021.11-4428-g6b6741b) 12.2.0, GNU ld (GNU Binutils) 2.39) #73 SMP Wed
     Nov  2 05:10:01 AEST 2022
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at mm/slub.c:3416
kmem_cache_alloc+0x5a4/0x5e8
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.1.0-rc3+ #73
[    0.000000] Stack : 810fff78 80084d98 00000000 00000004 00000000
00000000 80889d04 80c90000
[    0.000000]         80920000 807bd328 8089d368 80923bd3 00000000
00000001 80889cb0 00000000
[    0.000000]         00000000 00000000 807bd328 8084bcb1 00000002
00000002 00000001 6d6f4320
[    0.000000]         00000000 80c97d3d 80c97d68 fffffffc 807bd328
00000000 00000000 00000000
[    0.000000]         00000000 a0000000 80910000 8110a0b4 00000000
00000020 80010000 80010000
[    0.000000]         ...
[    0.000000] Call Trace:
[    0.000000] [<80008260>] show_stack+0x28/0xf0
[    0.000000] [<8070c958>] dump_stack_lvl+0x60/0x80
[    0.000000] [<8002e184>] __warn+0xc4/0xf8
[    0.000000] [<8002e210>] warn_slowpath_fmt+0x58/0xa4
[    0.000000] [<801c0fac>] kmem_cache_alloc+0x5a4/0x5e8
[    0.000000] [<8092856c>] prom_soc_init+0x1fc/0x2b4
[    0.000000] [<80928060>] prom_init+0x44/0xf0
[    0.000000] [<80929214>] setup_arch+0x4c/0x6a8
[    0.000000] [<809257e0>] start_kernel+0x88/0x7c0
[    0.000000]
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled

Allowing soc_device_register to work exposed oops in the mt7621 phy pci,
and pci controller drivers from soc_device_match_attr, due to missing
sentinels in the quirks tables. These were fixed with:
commit 819b885cd8 ("phy: ralink: mt7621-pci: add sentinel to quirks
table")
not yet applied ("PCI: mt7621: add sentinel to quirks table")

Link: https://lore.kernel.org/linux-mm/becf2ac3-2a90-4f3a-96d9-a70f67c66e4a@app.fastmail.com/
Fixes: 71b9b5e013 ("MIPS: ralink: mt7621: introduce 'soc_device' initialization")
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-12-01 13:32:49 +01:00
..
bootrom.c mips: ralink: convert to DEFINE_SHOW_ATTRIBUTE 2022-09-19 16:40:39 +02:00
cevt-rt3352.c MIPS: Replace setup_irq() by request_irq() 2020-03-05 16:47:35 +01:00
clk.c mips: ralink: convert to CONFIG_COMMON_CLK 2021-06-08 17:00:09 +02:00
common.h MIPS: ralink: mt7621: add memory detection support 2021-03-29 11:18:54 +02:00
early_printk.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
ill_acc.c mips: ralink: fix a refcount leak in ill_acc_of_setup() 2022-03-01 17:25:42 +01:00
irq-gic.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
irq.c mips: Bulk conversion to generic_handle_domain_irq() 2021-08-12 11:39:40 +01:00
Kconfig mips: dts: ralink: add MT7621 SoC 2022-03-16 15:10:23 +01:00
Makefile treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
mt7620.c pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file 2021-06-07 09:17:47 +02:00
mt7621.c mips: ralink: mt7621: do not use kzalloc too early 2022-12-01 13:32:49 +01:00
of.c mips: ralink: Fix refcount leak in of.c 2022-06-21 17:04:30 +02:00
Platform MIPS: ralink: Don't include objects twice 2020-05-15 09:10:07 +02:00
prom.c pinctrl: ralink: move ralink architecture pinmux header into the driver 2021-06-07 09:17:47 +02:00
reset.c MIPS: ralink: manage low reset lines 2021-02-04 13:35:01 +01:00
rt288x.c pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' file 2021-06-07 09:17:48 +02:00
rt305x.c pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' file 2021-06-07 09:17:47 +02:00
rt3883.c pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' file 2021-06-07 09:17:47 +02:00
timer-gic.c MIPS: ralink: Replace <linux/clk-provider.h> by <linux/of_clk.h> 2020-02-19 10:37:58 -08:00
timer.c MIPS: Remove dev_err() usage after platform_get_irq() 2019-08-26 11:26:04 +01:00