Paul Cercueil 944520f85d MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 volts ... Commit 08384e80a7 ("MIPS: DTS: CI20: Fix ACT8600 regulator node names") caused the VDDCORE power supply (regulated by the ACT8600's DCDC1 output) to drop from a voltage of 1.2V configured by the bootloader, to the 1.1V set in the Device Tree. According to the documentation, the VDDCORE supply should be between 0.99V and 1.21V; both values are therefore within the supported range. However, VDDCORE being 1.1V results in the CI20 being very unstable, with corrupted memory, failures to boot, or reboots at random. The reason might be succint drops of the voltage below the minimum required. Raising the minimum voltage to 1.125 volts seems to be enough to address this issue, while still keeping a relatively low core voltage which helps for power consumption and thermals. Fixes: 08384e80a7 ("MIPS: DTS: CI20: Fix ACT8600 regulator node names") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>		2023-06-23 15:00:18 +02:00
..
compressed	mips: boot/compressed: use __NO_FORTIFY	2022-11-11 15:43:26 +01:00
dts	MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 volts	2023-06-23 15:00:18 +02:00
tools	ELF: fix all "Elf" typos	2023-04-08 13:45:37 -07:00
.gitignore	mips: boot: clean up self-extracting targets scenarios	2020-11-12 23:46:45 +01:00
ecoff.h	MIPS: Make elf2ecoff work on 64bit host machines	2018-06-24 09:25:24 -07:00
elf2ecoff.c	MIPS: Make elf2ecoff work on 64bit host machines	2018-06-24 09:25:24 -07:00
Makefile	kbuild: use more subdir- for visiting subdirectories while cleaning	2021-10-24 13:49:46 +09:00