Paul Walmsley a1d5562315 OMAP2430: clock: use autoidle clkops for all autoidle-controllable interface clocks ...

Mark each interface clock with a corresponding CM_AUTOIDLE bit with
a clkops that has the allow_idle/deny_idle function pointers populated.
This allows the OMAP clock framework to enable and disable autoidle for
these clocks.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>

2011-03-07 20:03:44 -07:00

..

include/mach

TI816X: Add low level debug support

2011-02-16 08:31:53 -08:00

board-2430sdp.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-3430sdp.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-3630sdp.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-4430sdp.c

Merge branch 'for-tony' of git://gitorious.org/usb/usb into omap-for-linus

2011-02-22 10:54:12 -08:00

board-am3517crane.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-am3517evm.c

Merge branch 'for-tony' of git://gitorious.org/usb/usb into omap-for-linus

2011-02-22 10:54:12 -08:00

board-apollon.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-cm-t35.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-cm-t3517.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-devkit8000.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-flash.c

OMAP2plus: Fix static function warnings

2010-10-08 10:02:49 -07:00

board-flash.h

OMAP2plus: Fix static function warnings

2010-10-08 10:02:49 -07:00

board-generic.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-h4.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-igep0020.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-igep0030.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-ldp.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-n8x0.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-omap3beagle.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-omap3evm.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-omap3logic.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-omap3pandora.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-omap3stalker.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-omap3touchbook.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-omap4panda.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-overo.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-rm680.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-rx51-peripherals.c

omap: rx51: Add vdda_dac supply for tvout

2010-12-22 11:06:24 -08:00

board-rx51-video.c

omap: rx51: Remove tvout code that plays with gpio 40

2010-12-22 11:06:24 -08:00

board-rx51.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

board-ti8168evm.c

TI816X: Update to use init_early

2011-02-16 08:45:46 -08:00

board-zoom-debugboard.c

OMAP2plus: Fix static function warnings

2010-10-08 10:02:49 -07:00

board-zoom-display.c

OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3

2011-01-10 10:54:20 +02:00

board-zoom-peripherals.c

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

2011-01-14 13:13:07 -08:00

board-zoom.c

ARM: OMAP2: use early init hook

2011-02-14 15:40:20 -08:00

clkt2xxx_apll.c

OMAP2xxx: clock: add clockfw autoidle support for APLLs

2011-03-07 20:02:13 -07:00

clkt2xxx_dpll.c

OMAP2: clock: add DPLL autoidle support

2011-03-07 20:02:05 -07:00

clkt2xxx_dpllcore.c

OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"

2010-12-21 21:05:14 -07:00

clkt2xxx_osc.c

OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control

2011-03-07 20:02:21 -07:00

clkt2xxx_sys.c

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

clkt2xxx_virt_prcm_set.c

OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"

2010-12-21 21:05:14 -07:00

clkt34xx_dpll3m2.c

OMAP3/4 clock: split into per-chip family files

2010-02-24 12:16:15 -07:00

clkt_clksel.c

OMAP2+ clock: clean up clkt_clksel.c

2010-05-20 12:31:06 -06:00

clkt_dpll.c

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

clkt_iclk.c

OMAP2430/3xxx: clock: add modem clock autoidle support

2011-03-07 20:03:12 -07:00

clock2xxx.c

OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code

2010-02-24 17:45:15 -07:00

clock2xxx.h

omap: Start using CONFIG_SOC_OMAP

2011-01-27 16:39:40 -08:00

clock3xxx_data.c

OMAP2+: clock: disable autoidle on all clocks during clock init

2011-02-25 16:10:42 -07:00

clock3xxx.c

OMAP2+: clock: disable autoidle on all clocks during clock init

2011-02-25 16:10:42 -07:00

clock3xxx.h

OMAP3/4 clock: split into per-chip family files

2010-02-24 12:16:15 -07:00

clock34xx.c

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

clock34xx.h

OMAP3/4 clock: split into per-chip family files

2010-02-24 12:16:15 -07:00

clock36xx.c

OMAP3/4 clock: split into per-chip family files

2010-02-24 12:16:15 -07:00

clock36xx.h

OMAP3/4 clock: split into per-chip family files

2010-02-24 12:16:15 -07:00

clock44xx_data.c

OMAP2+: clock: disable autoidle on all clocks during clock init

2011-02-25 16:10:42 -07:00

clock44xx.h

OMAP3/4 clock: split into per-chip family files

2010-02-24 12:16:15 -07:00

clock2420_data.c

OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks

2011-03-07 20:02:57 -07:00

clock2430_data.c

OMAP2430: clock: use autoidle clkops for all autoidle-controllable interface clocks

2011-03-07 20:03:44 -07:00

clock2430.c

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

clock3517.c

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

clock3517.h

OMAP3/4 clock: split into per-chip family files

2010-02-24 12:16:15 -07:00

clock_common_data.c

OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality

2010-05-20 12:31:07 -06:00

clock.c

OMAP3/4: DPLL: Add allow_idle/deny_idle support for all DPLL's

2011-02-25 16:10:16 -07:00

clock.h

OMAP2430/3xxx: clock: add modem clock autoidle support

2011-03-07 20:03:12 -07:00

clockdomain2xxx_3xxx.c

OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable

2011-02-25 16:06:48 -07:00

clockdomain44xx.c

OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable

2011-02-25 16:06:48 -07:00

clockdomain.c

OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable

2011-02-25 16:06:48 -07:00

clockdomain.h

OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable

2011-02-25 16:06:48 -07:00

clockdomains2xxx_3xxx_data.c

OMAP: clockdomain: Arch specific funcs to handle deps

2011-02-25 16:06:47 -07:00

clockdomains44xx_data.c

OMAP: clockdomain: Arch specific funcs for sleep/wakeup of clkdm

2011-02-25 16:06:47 -07:00

cm1_44xx.h

OMAP4: CM instances: add clockdomain register offsets

2010-12-21 21:05:15 -07:00

cm2_44xx.h

OMAP4: CM instances: add clockdomain register offsets

2010-12-21 21:05:15 -07:00

cm2xxx_3xxx.c

OMAP2xxx: clock: add clockfw autoidle support for APLLs

2011-03-07 20:02:13 -07:00

cm2xxx_3xxx.h

OMAP2xxx: clock: add clockfw autoidle support for APLLs

2011-03-07 20:02:13 -07:00

cm44xx.c

OMAP4: PRCM: add OMAP4-specific accessor/mutator functions

2010-12-21 21:05:14 -07:00

cm44xx.h

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

cm-regbits-24xx.h

OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks

2011-03-07 20:02:57 -07:00

cm-regbits-34xx.h

OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support

2010-12-21 21:05:15 -07:00

cm-regbits-44xx.h

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

cm.h

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

cminst44xx.c

OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support

2010-12-21 21:05:15 -07:00

cminst44xx.h

OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support

2010-12-21 21:05:15 -07:00

common.c

Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus

2011-02-16 11:32:38 -08:00

control.c

OMAP3: control/PM: move padconf save code to mach-omap2/control.c

2010-12-21 21:05:16 -07:00

control.h

TI816X: Update common OMAP machine specific sources

2011-02-16 08:31:39 -08:00

cpuidle34xx.c

OMAP: clockdomain: Arch specific funcs for hwsup control of clkdm

2011-02-25 16:06:48 -07:00

devices.c

OMAP: devices: Modify McSPI device to adapt to hwmod framework

2011-02-17 09:53:31 -08:00

dma.c

arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR

2011-01-27 16:25:35 -08:00

dpll3xxx.c

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

2011-01-06 19:13:58 -08:00

dpll44xx.c

omap4: dpll: Enable auto gate control for all MX postdividers

2011-02-25 16:10:17 -07:00

dsp.c

OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"

2010-12-21 21:05:14 -07:00

emu.c

omap2/3: Fix initcalls for multi-omap

2010-02-15 09:27:05 -08:00

gpio.c

OMAP2+: GPIO: device registration

2010-12-07 16:26:57 -08:00

gpmc-nand.c

OMAP2/3: GPMC: put sync_clk value in picoseconds instead of nanoseconds

2010-12-21 12:05:25 -08:00

gpmc-onenand.c

OMAP2/3: OneNAND: add 104MHz support

2010-12-21 12:05:34 -08:00

gpmc-smc91x.c

omap: use smc91x_platdata to setup smc91x

2009-12-11 16:16:33 -08:00

gpmc-smsc911x.c

ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC

2010-09-28 11:39:18 -07:00

gpmc.c

OMAP2/3: GPMC: put sync_clk value in picoseconds instead of nanoseconds

2010-12-21 12:05:25 -08:00

hsmmc.c

OMAP: control: move plat-omap/control.h to mach-omap2/control.h

2010-10-08 11:40:20 -06:00

hsmmc.h

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

2010-10-25 13:46:56 -07:00

hwspinlock.c

omap: add hwspinlock device

2011-02-17 09:52:43 -08:00

i2c.c

omap: mux: Convert 2420 platform init code to use new mux code

2010-07-05 16:31:40 +03:00

id.c

TI816X: Update common OMAP machine specific sources

2011-02-16 08:31:39 -08:00

io.c

OMAP: clockdomain: Arch specific funcs to handle deps

2011-02-25 16:06:47 -07:00

io.h

OMAP: plat-omap: Fix static function warnings

2010-10-08 10:12:38 -07:00

iommu2.c

omap iommu: move iommu_disable at fault to the above layer

2010-06-29 07:55:07 +03:00

irq.c

Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus

2011-02-16 11:32:38 -08:00

Kconfig

Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus

2011-02-16 11:32:38 -08:00

mailbox.c

omap: Start using CONFIG_SOC_OMAP

2011-01-27 16:39:40 -08:00

Makefile

OMAP2+: clock: add interface clock type code with autoidle support

2011-03-07 20:02:30 -07:00

Makefile.boot

[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx

2005-11-10 14:26:51 +00:00

mcbsp.c

omap: Start using CONFIG_SOC_OMAP

2011-01-27 16:39:40 -08:00

mux34xx.c

omap3|4: mux: make local structures static

2011-01-06 19:58:28 -08:00

mux34xx.h

omap: mux: Add 36xx CBP package support

2009-12-11 16:16:33 -08:00

mux44xx.c

omap3|4: mux: make local structures static

2011-01-06 19:58:28 -08:00

mux44xx.h

OMAP4: mux: Add CBS package data for OMAP4430 ES2

2010-11-17 12:01:52 +01:00

mux2420.c

OMAP: mux: Add __func__ macro to pr_xxx macros

2010-11-17 12:01:54 +01:00

mux2420.h

omap: mux: Add data for 2420

2010-07-05 16:31:36 +03:00

mux2430.c

OMAP: mux: Add __func__ macro to pr_xxx macros

2010-11-17 12:01:54 +01:00

mux2430.h

omap: mux: Add data for 2430

2010-07-05 16:31:36 +03:00

mux.c

arm: mach-omap2: mux: free allocated memory on error exit

2011-02-01 15:51:36 -08:00

mux.h

omap2+: Add struct omap_board_data and use it for platform level serial init

2010-12-22 18:42:35 -08:00

omap4-common.c

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

2011-01-06 19:13:58 -08:00

omap44xx-smc.S

omap4: Add smc API to read AuxCoreBoot0 register

2010-08-02 13:18:18 +03:00

omap_hwmod_3xxx_data.c

OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC

2011-02-23 09:19:06 +02:00

omap_hwmod_44xx_data.c

OMAP4: hwmod data: Prevent timer1 to be reset and idle during init

2011-02-22 10:34:41 -08:00

omap_hwmod_2420_data.c

OMAP2420: hwmod data: add DSS DISPC RFBI VENC

2011-02-23 09:19:06 +02:00

omap_hwmod_2430_data.c

OMAP2430: hwmod data: add DSS DISPC RFBI VENC

2011-02-23 09:19:06 +02:00

omap_hwmod_common_data.c

OMAP: hwmod data: add class for IVA hwmods

2010-07-26 16:34:31 -06:00

omap_hwmod_common_data.h

OMAP: hwmod data: add class for IVA hwmods

2010-07-26 16:34:31 -06:00

omap_hwmod.c

omap: hwmod: Populate _mpu_rt_va later on in omap_hwmod_late_init

2011-02-14 15:43:03 -08:00

omap_opp_data.h

omap: opp: add OMAP3 OPP table data and common init

2010-12-21 14:30:40 -08:00

omap_phy_internal.c

usb: musb: AM35x: moving internal phy functions out of usb_musb.c file

2011-02-17 17:35:53 +02:00

omap_twl.c

OMAP2+: TWL: include pm header for init protos

2011-01-07 13:33:07 -08:00

omap-headsmp.S

omap4: Add smc API to read AuxCoreBoot0 register

2010-08-02 13:18:18 +03:00

omap-hotplug.c

ARM: CPU hotplug: remove bug checks in platform_cpu_die()

2010-12-20 15:09:10 +00:00

omap-iommu.c

OMAP: iommu: make iva2 iommu selectable

2010-12-15 11:33:31 -06:00

omap-smp.c

Merge branch 'misc' into devel

2011-01-06 22:32:52 +00:00

opp2xxx.h

omap: Start using CONFIG_SOC_OMAP

2011-01-27 16:39:40 -08:00

opp3xxx_data.c

omap: opp: add OMAP3 OPP table data and common init

2010-12-21 14:30:40 -08:00

opp4xxx_data.c

omap4: opp: add OPP table data

2010-12-21 14:30:40 -08:00

opp2420_data.c

OMAP2xxx OPP: clean up comments in OPP data

2010-01-08 15:23:15 -07:00

opp2430_data.c

OMAP2xxx OPP: clean up comments in OPP data

2010-01-08 15:23:15 -07:00

opp.c

omap: opp: add OMAP3 OPP table data and common init

2010-12-21 14:30:40 -08:00

pm24xx.c

OMAP2xxx: clock: add clockfw autoidle support for APLLs

2011-03-07 20:02:13 -07:00

pm34xx.c

OMAP2+: clock: autoidle as many clocks as possible if CONFIG_OMAP_RESET_CLOCKS

2011-02-25 16:10:16 -07:00

pm44xx.c

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2011-01-13 10:05:56 -08:00

pm_bus.c

omap2+: pm_bus: make functions used as pointers as static

2011-01-07 13:33:08 -08:00

pm-debug.c

OMAP: PM noop: implement context loss count for non-omap_devices

2010-12-21 21:31:55 -07:00

pm.c

OMAP: clockdomain: Arch specific funcs for hwsup control of clkdm

2011-02-25 16:06:48 -07:00

pm.h

OMAP4: Register voltage PMIC parameters with the voltage layer

2010-12-22 14:31:45 -08:00

powerdomain2xxx_3xxx.c

OMAP: PRCM: remove duplicated headers

2011-01-18 12:36:53 -07:00

powerdomain44xx.c

OMAP2+: powerdomain: move header file from plat-omap to mach-omap2

2010-12-21 21:05:16 -07:00

powerdomain-common.c

OMAP2+: powerdomain: move header file from plat-omap to mach-omap2

2010-12-21 21:05:16 -07:00

powerdomain.c

OMAP2+: powerdomain: add API to get context loss count

2010-12-21 21:31:55 -07:00

powerdomain.h

OMAP: powerdomain: remove unused func declaration

2011-02-25 16:06:46 -07:00

powerdomains2xxx_3xxx_data.c

OMAP2+: powerdomain: move header file from plat-omap to mach-omap2

2010-12-21 21:05:16 -07:00

powerdomains2xxx_3xxx_data.h

OMAP2+: powerdomain: move header file from plat-omap to mach-omap2

2010-12-21 21:05:16 -07:00

powerdomains2xxx_data.c

omap: Start using CONFIG_SOC_OMAP

2011-01-27 16:39:40 -08:00

powerdomains3xxx_data.c

OMAP2+: powerdomain: move header file from plat-omap to mach-omap2

2010-12-21 21:05:16 -07:00

powerdomains44xx_data.c

OMAP4: powerdomain: Remove L3INIT_PD OFF state

2010-12-21 22:37:28 -07:00

prcm44xx.h

OMAP4: PRCM: add OMAP4-specific accessor/mutator functions

2010-12-21 21:05:14 -07:00

prcm_mpu44xx.c

OMAP4: PRCM: add OMAP4-specific accessor/mutator functions

2010-12-21 21:05:14 -07:00

prcm_mpu44xx.h

OMAP4: CM instances: add clockdomain register offsets

2010-12-21 21:05:15 -07:00

prcm-common.h

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

prcm.c

ARM: OMAP: Allow platforms to hook reset cleanly

2011-01-27 16:39:48 -08:00

prm2xxx_3xxx.c

OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"

2010-12-21 21:05:14 -07:00

prm2xxx_3xxx.h

omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'

2011-01-07 13:33:10 -08:00

prm44xx.c

OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file

2010-12-21 21:05:14 -07:00

prm44xx.h

OMAP4: CM instances: add clockdomain register offsets

2010-12-21 21:05:15 -07:00

prm-regbits-24xx.h

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

prm-regbits-34xx.h

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

prm-regbits-44xx.h

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

prm.h

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

prminst44xx.c

OMAP4: PRCM: add OMAP4-specific accessor/mutator functions

2010-12-21 21:05:14 -07:00

prminst44xx.h

OMAP4: PRCM: add OMAP4-specific accessor/mutator functions

2010-12-21 21:05:14 -07:00

scrm44xx.h

OMAP4: PRCM: Add SCRM header file

2010-12-21 20:01:54 -07:00

sdram-hynix-h8mbx00u0mer-0em.h

omap3: zoom: Introduce zoom3 board support

2009-11-22 10:24:33 -08:00

sdram-micron-mt46h32m32lf-6.h

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

sdram-nokia.c

arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data

2010-12-17 15:13:46 -08:00

sdram-nokia.h

arm: omap: add sdram-nokia.h

2010-12-17 15:13:44 -08:00

sdram-numonyx-m65kxxxxam.h

omap3: SDRC: add timing data for Numonyx M65KxxxxAM

2010-02-17 17:23:20 -08:00

sdram-qimonda-hyb18m512160af-6.h

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

sdrc2xxx.c

OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"

2010-12-21 21:05:14 -07:00

sdrc.c

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

sdrc.h

OMAP2+: use global values for the SRAM PA addresses

2010-12-21 14:45:56 -08:00

serial.c

TI816X: Update common OMAP machine specific sources

2011-02-16 08:31:39 -08:00

sleep24xx.S

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

sleep34xx.S

OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files

2010-12-21 20:01:55 -07:00

smartreflex-class3.c

OMAP3: PM: Adding smartreflex class3 driver

2010-12-22 14:31:40 -08:00

smartreflex.c

OMAP: PM: SmartReflex: Fix possible null pointer read access

2011-01-31 12:59:15 -08:00

sr_device.c

OMAP3+: sr_device: include pm header

2011-01-07 13:33:06 -08:00

sram34xx.S

OMAP2/3: SRAM: add comment about crashes during a TLB miss

2010-12-21 21:08:14 -07:00

sram242x.S

OMAP2/3: SRAM: add comment about crashes during a TLB miss

2010-12-21 21:08:14 -07:00

sram243x.S

OMAP2/3: SRAM: add comment about crashes during a TLB miss

2010-12-21 21:08:14 -07:00

timer-gp.c

OMAP: counter_32k: init clocksource as part of machine timer init

2011-01-18 12:04:12 -07:00

timer-gp.h

OMAP2plus: Fix static function warnings

2010-10-08 10:02:49 -07:00

timer-mpu.c

omap4: Use irq line defines from irq-44xx.h

2010-02-23 15:29:08 -08:00

usb-ehci.c

arm: omap4: usb: add platform init code for EHCI

2010-12-01 02:42:13 +05:30

usb-fs.c

OMAP: control: move plat-omap/control.h to mach-omap2/control.h

2010-10-08 11:40:20 -06:00

usb-musb.c

OMAP2+: musb: hwmod adaptation for musb registration

2011-02-17 18:34:00 +02:00

usb-tusb6010.c

Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

2011-01-07 13:16:28 -08:00

voltage.c

arm: mach-omap2: voltage: debugfs: fix memory leak

2011-01-31 12:59:14 -08:00

wd_timer.c

omap2+: wdt: trivial sparse fixes

2011-01-06 19:58:28 -08:00

wd_timer.h

OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c

2010-12-21 19:56:17 -07:00