Redstone1024/Fursuit-CylinderFan
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 6 Wiki Activity

test(readme): modify QA steps to make them easier to perform

Browse Source
This commit is contained in:
Redstone1024 2024-04-14 20:10:47 +08:00
parent 8888c771a5
commit c69cb53f4b
1 changed files with 5 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
README.md
View File

@ -24,9 +24,12 @@ You can refer to the following procedure to verify that the PCB is working, and
1. Ensure that there is **no shorts** for C1 C2 C23 and that their resistance is at the MOhm level. 1. Ensure that there is **no shorts** for C1 C2 C23 and that their resistance is at the MOhm level.
2. Ensure that there are **no false shorts** between the IP2368 and Type-C pins and to GND. 2. Ensure that there are **no false shorts** between the IP2368 and Type-C pins and to GND.
3. Ensure LEDs are oriented and colored correctly. 3. Ensure LEDs are oriented and colored correctly.
4. When connected to a standard Type-C PD power supply and **without** battery, ensure the power supply should be around **20V** and **0.6W**. 4. When connected to a standard Type-C PD power supply and **without** battery.
1. Ensure the power supply should be around **20V**.
2. Ensure the power supply should be around **0.6W**.
3. Ensure the C2 voltage should be around **12.6V**.
5. Insert a battery of less than **50%** capacity, ensure the red light blinks **4** times and then goes out. 5. Insert a battery of less than **50%** capacity, ensure the red light blinks **4** times and then goes out.
6. When connected to a standard Type-C PD power supply with a **50%** capacity battery. 6. When connected to a standard Type-C PD power supply with a **50%** capacity battery (**Pay attention to high temperature**).
1. Ensure the red light comes on quickly and without blinking. 1. Ensure the red light comes on quickly and without blinking.
2. Within IC protocol negotiation, ensure the power supply should be around **0.6W**. 2. Within IC protocol negotiation, ensure the power supply should be around **0.6W**.
3. After IC protocol negotiation, ensure the power supply should be about **24W** (12W for 5V, 9V, 12V, 15V). 3. After IC protocol negotiation, ensure the power supply should be about **24W** (12W for 5V, 9V, 12V, 15V).